From: Jean-Jacques Hiblot <jjhiblot@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 11/11] defconfig: dra7xx_evm: enable CONFIG_BLK and disk driver model for SCSI
Date: Fri, 14 Apr 2017 13:08:09 +0200 [thread overview]
Message-ID: <1492168089-15437-12-git-send-email-jjhiblot@ti.com> (raw)
In-Reply-To: <1492168089-15437-1-git-send-email-jjhiblot@ti.com>
Enable disk driver model for dra7xx_evm as dwc_ahci supports
driver model. As a consequence we must also enable CONFIG_BLK and
CONFIG_DM_USB.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
---
configs/dra7xx_evm_defconfig | 12 +++++++++++-
configs/dra7xx_hs_evm_defconfig | 11 ++++++++++-
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig
index 42f87b3..8bc395f 100644
--- a/configs/dra7xx_evm_defconfig
+++ b/configs/dra7xx_evm_defconfig
@@ -59,7 +59,13 @@ CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIST="dra7-evm dra72-evm dra72-evm-revc dra71-evm"
CONFIG_DM=y
CONFIG_SPL_DM=y
-# CONFIG_BLK is not set
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_BLK=y
+CONFIG_DM_SCSI=y
+CONFIG_DWC_AHCI=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_DFU_SF=y
@@ -89,6 +95,7 @@ CONFIG_TI_QSPI=y
CONFIG_TIMER=y
CONFIG_OMAP_TIMER=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
@@ -101,3 +108,6 @@ CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_SPL_GENERIC_PHY=y
+CONFIG_PIPE3_PHY=y
+CONFIG_SPL_PIPE3_PHY=y
diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig
index 871604f..40ac3d5 100644
--- a/configs/dra7xx_hs_evm_defconfig
+++ b/configs/dra7xx_hs_evm_defconfig
@@ -64,7 +64,12 @@ CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIST="dra7-evm dra72-evm dra72-evm-revc dra71-evm"
CONFIG_DM=y
CONFIG_SPL_DM=y
-# CONFIG_BLK is not set
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_DM_SCSI=y
+CONFIG_DWC_AHCI=y
CONFIG_DFU_MMC=y
CONFIG_DFU_RAM=y
CONFIG_DFU_SF=y
@@ -94,6 +99,7 @@ CONFIG_TI_QSPI=y
CONFIG_TIMER=y
CONFIG_OMAP_TIMER=y
CONFIG_USB=y
+CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
@@ -106,3 +112,6 @@ CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
CONFIG_G_DNL_VENDOR_NUM=0x0451
CONFIG_G_DNL_PRODUCT_NUM=0xd022
+CONFIG_SPL_GENERIC_PHY=y
+CONFIG_PIPE3_PHY=y
+CONFIG_SPL_PIPE3_PHY=y
--
1.9.1
next prev parent reply other threads:[~2017-04-14 11:08 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-14 11:07 [U-Boot] [PATCH 00/11] OMAP: Move SATA to use block driver model Jean-Jacques Hiblot
2017-04-14 11:07 ` [U-Boot] [PATCH 01/11] arm: omap: sata: move enable sata clocks to enable_basic_clocks() Jean-Jacques Hiblot
2017-04-14 11:08 ` [U-Boot] [PATCH 02/11] arm: omap: sata: compile out board-level sata code when CONFIG_DM_SCSI is defined Jean-Jacques Hiblot
2017-04-14 11:08 ` [U-Boot] [PATCH 03/11] drivers: phy: add generic PHY framework Jean-Jacques Hiblot
2017-04-15 17:10 ` Simon Glass
2017-04-18 13:32 ` Jean-Jacques Hiblot
2017-04-19 0:12 ` Simon Glass
2017-04-14 11:08 ` [U-Boot] [PATCH 04/11] dm: test: Add tests for the generic PHY uclass Jean-Jacques Hiblot
2017-04-15 17:10 ` Simon Glass
2017-04-14 11:08 ` [U-Boot] [PATCH 05/11] drivers: phy: add PIPE3 phy driver Jean-Jacques Hiblot
2017-04-14 11:08 ` [U-Boot] [PATCH 06/11] dra7: dtsi: mark ocp2scp bus compatible with "simple-bus" Jean-Jacques Hiblot
2017-04-14 20:06 ` Tom Rini
2017-04-14 11:08 ` [U-Boot] [PATCH 07/11] drivers: block: dwc_ahci: Implement a driver for Synopsys DWC sata device Jean-Jacques Hiblot
2017-04-14 11:08 ` [U-Boot] [PATCH 08/11] scsi: make the LUN a parameter of scsi_detect_dev() Jean-Jacques Hiblot
2017-04-14 11:08 ` [U-Boot] [PATCH 09/11] scsi: move the partition initialization out of the scsi detection Jean-Jacques Hiblot
2017-04-14 11:08 ` [U-Boot] [PATCH 10/11] dm: scsi: fix divide-by-0 error in scsi_scan() Jean-Jacques Hiblot
2017-04-14 11:08 ` Jean-Jacques Hiblot [this message]
2017-04-14 11:13 ` [U-Boot] [PATCH 00/11] OMAP: Move SATA to use block driver model Jean-Jacques Hiblot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1492168089-15437-12-git-send-email-jjhiblot@ti.com \
--to=jjhiblot@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.