[PATCH v2] ethdev: moved bypass functions to ixgbe pmd

[Radu Nicolau <radu.nicolau@intel.com>]

Moved all bypass functions to ixgbe pmd and removed function
pointers from the eth_dev_ops struct.

Changes in v2:
CONFIG_RTE_NIC_BYPASS removed, new option in the IXGBE section
added, CONFIG_RTE_LIBRTE_IXGBE_BYPASS.
Updated test-pmd to always include the bypass commands.

Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
---
 app/test-pmd/cmdline.c                      | 124 ++++++++-------
 app/test-pmd/testpmd.c                      |  13 +-
 app/test-pmd/testpmd.h                      |   2 -
 config/common_base                          |   6 +-
 doc/guides/rel_notes/deprecation.rst        |  23 ---
 drivers/net/ixgbe/Makefile                  |   2 +-
 drivers/net/ixgbe/ixgbe_bypass.c            |   5 +-
 drivers/net/ixgbe/ixgbe_bypass.h            |   4 +-
 drivers/net/ixgbe/ixgbe_bypass_api.h        |   4 +-
 drivers/net/ixgbe/ixgbe_bypass_defines.h    |   4 +-
 drivers/net/ixgbe/ixgbe_ethdev.c            |  25 +--
 drivers/net/ixgbe/ixgbe_ethdev.h            |   4 +-
 drivers/net/ixgbe/rte_pmd_ixgbe.c           | 106 +++++++++++++
 drivers/net/ixgbe/rte_pmd_ixgbe.h           | 215 ++++++++++++++++++++++++++
 drivers/net/ixgbe/rte_pmd_ixgbe_version.map |  14 ++
 lib/librte_ether/rte_ethdev.c               | 122 ---------------
 lib/librte_ether/rte_ethdev.h               | 230 ----------------------------
 lib/librte_ether/rte_ether_version.map      |   9 --
 18 files changed, 431 insertions(+), 481 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 0afac68..fcb7488 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -523,7 +523,6 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"   Flush (default) or don't flush RX streams before"
 			" forwarding. Mainly used with PCAP drivers.\n\n"
 
-			#ifdef RTE_NIC_BYPASS
 			"set bypass mode (normal|bypass|isolate) (port_id)\n"
 			"   Set the bypass mode for the lowest port on bypass enabled"
 			" NIC.\n\n"
@@ -546,7 +545,7 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"show bypass config (port_id)\n"
 			"   Show the bypass configuration for a bypass enabled NIC"
 			" using the lowest port on the NIC.\n\n"
-#endif
+
 #ifdef RTE_LIBRTE_PMD_BOND
 			"create bonded device (mode) (socket)\n"
 			"	Create a new bonded device with specific bonding mode and socket.\n\n"
@@ -3904,7 +3903,6 @@ cmdline_parse_inst_t cmd_set_link_check = {
 	},
 };
 
-#ifdef RTE_NIC_BYPASS
 /* *** SET NIC BYPASS MODE *** */
 struct cmd_set_bypass_mode_result {
 	cmdline_fixed_string_t set;
@@ -3921,19 +3919,23 @@ cmd_set_bypass_mode_parsed(void *parsed_result,
 {
 	struct cmd_set_bypass_mode_result *res = parsed_result;
 	portid_t port_id = res->port_id;
-	uint32_t bypass_mode = RTE_BYPASS_MODE_NORMAL;
+	int32_t rc = -EINVAL;
+
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
+	uint32_t bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL;
 
 	if (!strcmp(res->value, "bypass"))
-		bypass_mode = RTE_BYPASS_MODE_BYPASS;
+		bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_BYPASS;
 	else if (!strcmp(res->value, "isolate"))
-		bypass_mode = RTE_BYPASS_MODE_ISOLATE;
+		bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE;
 	else
-		bypass_mode = RTE_BYPASS_MODE_NORMAL;
+		bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL;
 
 	/* Set the bypass mode for the relevant port. */
-	if (0 != rte_eth_dev_bypass_state_set(port_id, &bypass_mode)) {
+	rc = rte_pmd_ixgbe_bypass_state_set(port_id, &bypass_mode);
+#endif
+	if (rc != 0)
 		printf("\t Failed to set bypass mode for port = %d.\n", port_id);
-	}
 }
 
 cmdline_parse_token_string_t cmd_setbypass_mode_set =
@@ -3983,51 +3985,57 @@ cmd_set_bypass_event_parsed(void *parsed_result,
 		__attribute__((unused)) struct cmdline *cl,
 		__attribute__((unused)) void *data)
 {
-	int32_t rc;
+	int32_t rc = -EINVAL;
 	struct cmd_set_bypass_event_result *res = parsed_result;
 	portid_t port_id = res->port_id;
-	uint32_t bypass_event = RTE_BYPASS_EVENT_NONE;
-	uint32_t bypass_mode = RTE_BYPASS_MODE_NORMAL;
+
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
+	uint32_t bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_NONE;
+	uint32_t bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL;
 
 	if (!strcmp(res->event_value, "timeout"))
-		bypass_event = RTE_BYPASS_EVENT_TIMEOUT;
+		bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT;
 	else if (!strcmp(res->event_value, "os_on"))
-		bypass_event = RTE_BYPASS_EVENT_OS_ON;
+		bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_OS_ON;
 	else if (!strcmp(res->event_value, "os_off"))
-		bypass_event = RTE_BYPASS_EVENT_OS_OFF;
+		bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_OS_OFF;
 	else if (!strcmp(res->event_value, "power_on"))
-		bypass_event = RTE_BYPASS_EVENT_POWER_ON;
+		bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_POWER_ON;
 	else if (!strcmp(res->event_value, "power_off"))
-		bypass_event = RTE_BYPASS_EVENT_POWER_OFF;
+		bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_POWER_OFF;
 	else
-		bypass_event = RTE_BYPASS_EVENT_NONE;
+		bypass_event = RTE_PMD_IXGBE_BYPASS_EVENT_NONE;
 
 	if (!strcmp(res->mode_value, "bypass"))
-		bypass_mode = RTE_BYPASS_MODE_BYPASS;
+		bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_BYPASS;
 	else if (!strcmp(res->mode_value, "isolate"))
-		bypass_mode = RTE_BYPASS_MODE_ISOLATE;
+		bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE;
 	else
-		bypass_mode = RTE_BYPASS_MODE_NORMAL;
+		bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NORMAL;
 
 	/* Set the watchdog timeout. */
-	if (bypass_event == RTE_BYPASS_EVENT_TIMEOUT) {
+	if (bypass_event == RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT) {
 
 		rc = -EINVAL;
-		if (!RTE_BYPASS_TMT_VALID(bypass_timeout) ||
-				(rc = rte_eth_dev_wd_timeout_store(port_id,
-				bypass_timeout)) != 0) {
+		if (RTE_PMD_IXGBE_BYPASS_TMT_VALID(bypass_timeout)) {
+			rc = rte_pmd_ixgbe_bypass_wd_timeout_store(port_id,
+							   bypass_timeout);
+		}
+		if (rc != 0) {
 			printf("Failed to set timeout value %u "
-				"for port %d, errto code: %d.\n",
-				bypass_timeout, port_id, rc);
+			"for port %d, errto code: %d.\n",
+			bypass_timeout, port_id, rc);
 		}
 	}
 
 	/* Set the bypass event to transition to bypass mode. */
-	if (0 != rte_eth_dev_bypass_event_store(port_id,
-			bypass_event, bypass_mode)) {
-		printf("\t Failed to set bypass event for port = %d.\n", port_id);
-	}
+	rc = rte_pmd_ixgbe_bypass_event_store(port_id, bypass_event,
+					      bypass_mode);
+#endif
 
+	if (rc != 0)
+		printf("\t Failed to set bypass event for port = %d.\n",
+		       port_id);
 }
 
 cmdline_parse_token_string_t cmd_setbypass_event_set =
@@ -4084,24 +4092,26 @@ cmd_set_bypass_timeout_parsed(void *parsed_result,
 		__attribute__((unused)) struct cmdline *cl,
 		__attribute__((unused)) void *data)
 {
-	struct cmd_set_bypass_timeout_result *res = parsed_result;
+	__rte_unused struct cmd_set_bypass_timeout_result *res = parsed_result;
 
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
 	if (!strcmp(res->value, "1.5"))
-		bypass_timeout = RTE_BYPASS_TMT_1_5_SEC;
+		bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC;
 	else if (!strcmp(res->value, "2"))
-		bypass_timeout = RTE_BYPASS_TMT_2_SEC;
+		bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_2_SEC;
 	else if (!strcmp(res->value, "3"))
-		bypass_timeout = RTE_BYPASS_TMT_3_SEC;
+		bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_3_SEC;
 	else if (!strcmp(res->value, "4"))
-		bypass_timeout = RTE_BYPASS_TMT_4_SEC;
+		bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_4_SEC;
 	else if (!strcmp(res->value, "8"))
-		bypass_timeout = RTE_BYPASS_TMT_8_SEC;
+		bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_8_SEC;
 	else if (!strcmp(res->value, "16"))
-		bypass_timeout = RTE_BYPASS_TMT_16_SEC;
+		bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_16_SEC;
 	else if (!strcmp(res->value, "32"))
-		bypass_timeout = RTE_BYPASS_TMT_32_SEC;
+		bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_32_SEC;
 	else
-		bypass_timeout = RTE_BYPASS_TMT_OFF;
+		bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
+#endif
 }
 
 cmdline_parse_token_string_t cmd_setbypass_timeout_set =
@@ -4145,17 +4155,19 @@ cmd_show_bypass_config_parsed(void *parsed_result,
 		__attribute__((unused)) void *data)
 {
 	struct cmd_show_bypass_config_result *res = parsed_result;
+	portid_t port_id = res->port_id;
+	int rc = -EINVAL;
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
 	uint32_t event_mode;
 	uint32_t bypass_mode;
-	portid_t port_id = res->port_id;
 	uint32_t timeout = bypass_timeout;
 	int i;
 
-	static const char * const timeouts[RTE_BYPASS_TMT_NUM] =
+	static const char * const timeouts[RTE_PMD_IXGBE_BYPASS_TMT_NUM] =
 		{"off", "1.5", "2", "3", "4", "8", "16", "32"};
-	static const char * const modes[RTE_BYPASS_MODE_NUM] =
+	static const char * const modes[RTE_PMD_IXGBE_BYPASS_MODE_NUM] =
 		{"UNKNOWN", "normal", "bypass", "isolate"};
-	static const char * const events[RTE_BYPASS_EVENT_NUM] = {
+	static const char * const events[RTE_PMD_IXGBE_BYPASS_EVENT_NUM] = {
 		"NONE",
 		"OS/board on",
 		"power supply on",
@@ -4165,37 +4177,40 @@ cmd_show_bypass_config_parsed(void *parsed_result,
 	int num_events = (sizeof events) / (sizeof events[0]);
 
 	/* Display the bypass mode.*/
-	if (0 != rte_eth_dev_bypass_state_show(port_id, &bypass_mode)) {
+	if (rte_pmd_ixgbe_bypass_state_show(port_id, &bypass_mode) != 0) {
 		printf("\tFailed to get bypass mode for port = %d\n", port_id);
 		return;
 	}
 	else {
-		if (!RTE_BYPASS_MODE_VALID(bypass_mode))
-			bypass_mode = RTE_BYPASS_MODE_NONE;
+		if (!RTE_PMD_IXGBE_BYPASS_MODE_VALID(bypass_mode))
+			bypass_mode = RTE_PMD_IXGBE_BYPASS_MODE_NONE;
 
 		printf("\tbypass mode    = %s\n",  modes[bypass_mode]);
 	}
 
 	/* Display the bypass timeout.*/
-	if (!RTE_BYPASS_TMT_VALID(timeout))
-		timeout = RTE_BYPASS_TMT_OFF;
+	if (!RTE_PMD_IXGBE_BYPASS_TMT_VALID(timeout))
+		timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
 
 	printf("\tbypass timeout = %s\n", timeouts[timeout]);
 
 	/* Display the bypass events and associated modes. */
-	for (i = RTE_BYPASS_EVENT_START; i < num_events; i++) {
+	for (i = RTE_PMD_IXGBE_BYPASS_EVENT_START; i < num_events; i++) {
 
-		if (0 != rte_eth_dev_bypass_event_show(port_id, i, &event_mode)) {
+		if (rte_pmd_ixgbe_bypass_event_show(port_id, i, &event_mode)) {
 			printf("\tFailed to get bypass mode for event = %s\n",
 				events[i]);
 		} else {
-			if (!RTE_BYPASS_MODE_VALID(event_mode))
-				event_mode = RTE_BYPASS_MODE_NONE;
+			if (!RTE_PMD_IXGBE_BYPASS_MODE_VALID(event_mode))
+				event_mode = RTE_PMD_IXGBE_BYPASS_MODE_NONE;
 
 			printf("\tbypass event: %-16s = %s\n", events[i],
 				modes[event_mode]);
 		}
 	}
+#endif
+	if (rc != 0)
+		printf("\tFailed to get bypass mode for port = %d\n", port_id);
 }
 
 cmdline_parse_token_string_t cmd_showbypass_config_show =
@@ -4224,7 +4239,6 @@ cmdline_parse_inst_t cmd_show_bypass_config = {
 		NULL,
 	},
 };
-#endif
 
 #ifdef RTE_LIBRTE_PMD_BOND
 /* *** SET BONDING MODE *** */
@@ -13597,12 +13611,10 @@ cmdline_parse_ctx_t main_ctx[] = {
 	(cmdline_parse_inst_t *)&cmd_set_allmulti_mode_all,
 	(cmdline_parse_inst_t *)&cmd_set_flush_rx,
 	(cmdline_parse_inst_t *)&cmd_set_link_check,
-#ifdef RTE_NIC_BYPASS
 	(cmdline_parse_inst_t *)&cmd_set_bypass_mode,
 	(cmdline_parse_inst_t *)&cmd_set_bypass_event,
 	(cmdline_parse_inst_t *)&cmd_set_bypass_timeout,
 	(cmdline_parse_inst_t *)&cmd_show_bypass_config,
-#endif
 #ifdef RTE_LIBRTE_PMD_BOND
 	(cmdline_parse_inst_t *) &cmd_set_bonding_mode,
 	(cmdline_parse_inst_t *) &cmd_show_bonding_config,
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index d1041af..17ae446 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -73,6 +73,9 @@
 #include <rte_ethdev.h>
 #include <rte_dev.h>
 #include <rte_string_fns.h>
+#ifdef RTE_LIBRTE_IXGBE_PMD
+#include <rte_pmd_ixgbe.h>
+#endif
 #ifdef RTE_LIBRTE_PMD_XENVIRT
 #include <rte_eth_xenvirt.h>
 #endif
@@ -295,13 +298,13 @@ uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) |
 /*
  * NIC bypass mode configuration options.
  */
-#ifdef RTE_NIC_BYPASS
 
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
 /* The NIC bypass watchdog timeout. */
-uint32_t bypass_timeout = RTE_BYPASS_TMT_OFF;
-
+uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
 #endif
 
+
 #ifdef RTE_LIBRTE_LATENCY_STATS
 
 /*
@@ -2012,8 +2015,8 @@ init_port_config(void)
 		rte_eth_macaddr_get(pid, &port->eth_addr);
 
 		map_port_queue_stats_mapping_registers(pid, port);
-#ifdef RTE_NIC_BYPASS
-		rte_eth_dev_bypass_init(pid);
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
+		rte_pmd_ixgbe_bypass_init(pid);
 #endif
 
 		if (lsc_interrupt &&
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index e6c43ba..5054d30 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -311,9 +311,7 @@ extern uint8_t rmv_interrupt; /**< disabled by "--no-rmv-interrupt" parameter */
 extern uint32_t event_print_mask;
 /**< set by "--print-event xxxx" and "--mask-event xxxx parameters */
 
-#ifdef RTE_NIC_BYPASS
 extern uint32_t bypass_timeout; /**< Store the NIC bypass watchdog timeout */
-#endif
 
 /*
  * Store specified sockets on which memory pool to be used by ports
diff --git a/config/common_base b/config/common_base
index 8907bea..c439083 100644
--- a/config/common_base
+++ b/config/common_base
@@ -145,11 +145,6 @@ CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
 CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
 
 #
-# Support NIC bypass logic
-#
-CONFIG_RTE_NIC_BYPASS=n
-
-#
 # Compile burst-oriented Amazon ENA PMD driver
 #
 CONFIG_RTE_LIBRTE_ENA_PMD=y
@@ -182,6 +177,7 @@ CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
 CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
 CONFIG_RTE_IXGBE_INC_VECTOR=y
+CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
 
 #
 # Compile burst-oriented I40E PMD driver
diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst
index ba9b5a2..1786a59 100644
--- a/doc/guides/rel_notes/deprecation.rst
+++ b/doc/guides/rel_notes/deprecation.rst
@@ -38,29 +38,6 @@ Deprecation Notices
   ``_rte_eth_dev_callback_process``. In 17.08 the function will return an ``int``
   instead of ``void`` and a fourth parameter ``void *ret_param`` will be added.
 
-* ethdev: for 17.08 it is planned to deprecate the following nine rte_eth_dev_*
-  functions and move them into the ixgbe PMD:
-
-  ``rte_eth_dev_bypass_init``, ``rte_eth_dev_bypass_state_set``,
-  ``rte_eth_dev_bypass_state_show``, ``rte_eth_dev_bypass_event_store``,
-  ``rte_eth_dev_bypass_event_show``, ``rte_eth_dev_wd_timeout_store``,
-  ``rte_eth_dev_bypass_wd_timeout_show``, ``rte_eth_dev_bypass_ver_show``,
-  ``rte_eth_dev_bypass_wd_reset``.
-
-  The following fields will be removed from ``struct eth_dev_ops``:
-
-  ``bypass_init_t``, ``bypass_state_set_t``, ``bypass_state_show_t``,
-  ``bypass_event_set_t``, ``bypass_event_show_t``, ``bypass_wd_timeout_set_t``,
-  ``bypass_wd_timeout_show_t``, ``bypass_ver_show_t``, ``bypass_wd_reset_t``.
-
-  The functions will be renamed to the following, and moved to the ``ixgbe`` PMD:
-
-  ``rte_pmd_ixgbe_bypass_init``, ``rte_pmd_ixgbe_bypass_state_set``,
-  ``rte_pmd_ixgbe_bypass_state_show``, ``rte_pmd_ixgbe_bypass_event_set``,
-  ``rte_pmd_ixgbe_bypass_event_show``, ``rte_pmd_ixgbe_bypass_wd_timeout_set``,
-  ``rte_pmd_ixgbe_bypass_wd_timeout_show``, ``rte_pmd_ixgbe_bypass_ver_show``,
-  ``rte_pmd_ixgbe_bypass_wd_reset``.
-
 * The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and
   are respectively replaced by PKT_RX_VLAN_STRIPPED and
   PKT_RX_QINQ_STRIPPED, that are better described. The old flags and
diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile
index 5529d81..6a651b9 100644
--- a/drivers/net/ixgbe/Makefile
+++ b/drivers/net/ixgbe/Makefile
@@ -119,7 +119,7 @@ else
 SRCS-$(CONFIG_RTE_IXGBE_INC_VECTOR) += ixgbe_rxtx_vec_sse.c
 endif
 
-ifeq ($(CONFIG_RTE_NIC_BYPASS),y)
+ifeq ($(CONFIG_RTE_LIBRTE_IXGBE_BYPASS),y)
 SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_bypass.c
 SRCS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += ixgbe_82599_bypass.c
 endif
diff --git a/drivers/net/ixgbe/ixgbe_bypass.c b/drivers/net/ixgbe/ixgbe_bypass.c
index 7006928..38a4493 100644
--- a/drivers/net/ixgbe/ixgbe_bypass.c
+++ b/drivers/net/ixgbe/ixgbe_bypass.c
@@ -36,6 +36,7 @@
 #include <rte_ethdev.h>
 #include "ixgbe_ethdev.h"
 #include "ixgbe_bypass_api.h"
+#include "rte_pmd_ixgbe.h"
 
 #define	BYPASS_STATUS_OFF_MASK	3
 
@@ -284,7 +285,7 @@ ixgbe_bypass_wd_timeout_store(struct rte_eth_dev *dev, u32 timeout)
 	FUNC_PTR_OR_ERR_RET(adapter->bps.ops.bypass_set, -ENOTSUP);
 
 	/* disable the timer with timeout of zero */
-	if (timeout == RTE_BYPASS_TMT_OFF) {
+	if (timeout == RTE_PMD_IXGBE_BYPASS_TMT_OFF) {
 		status = 0x0;   /* WDG enable off */
 		mask = BYPASS_WDT_ENABLE_M;
 	} else {
@@ -355,7 +356,7 @@ ixgbe_bypass_wd_timeout_show(struct rte_eth_dev *dev, u32 *wd_timeout)
 
 	wdg = by_ctl & BYPASS_WDT_ENABLE_M;
 	if (!wdg)
-		*wd_timeout = RTE_BYPASS_TMT_OFF;
+		*wd_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
 	else
 		*wd_timeout = (by_ctl >> BYPASS_WDT_TIME_SHIFT) &
 			BYPASS_WDT_MASK;
diff --git a/drivers/net/ixgbe/ixgbe_bypass.h b/drivers/net/ixgbe/ixgbe_bypass.h
index 5f5c63e..09155bb 100644
--- a/drivers/net/ixgbe/ixgbe_bypass.h
+++ b/drivers/net/ixgbe/ixgbe_bypass.h
@@ -34,7 +34,7 @@
 #ifndef _IXGBE_BYPASS_H_
 #define _IXGBE_BYPASS_H_
 
-#ifdef RTE_NIC_BYPASS
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
 
 struct ixgbe_bypass_mac_ops {
 	s32 (*bypass_rw)(struct ixgbe_hw *hw, u32 cmd, u32 *status);
@@ -63,6 +63,6 @@ s32 ixgbe_bypass_wd_reset(struct rte_eth_dev *dev);
 s32 ixgbe_bypass_init_shared_code(struct ixgbe_hw *hw);
 s32 ixgbe_bypass_init_hw(struct ixgbe_hw *hw);
 
-#endif /* RTE_NIC_BYPASS */
+#endif /* RTE_LIBRTE_IXGBE_BYPASS */
 
 #endif /*  _IXGBE_BYPASS_H_ */
diff --git a/drivers/net/ixgbe/ixgbe_bypass_api.h b/drivers/net/ixgbe/ixgbe_bypass_api.h
index aec8f1e..d52fde0 100644
--- a/drivers/net/ixgbe/ixgbe_bypass_api.h
+++ b/drivers/net/ixgbe/ixgbe_bypass_api.h
@@ -34,7 +34,7 @@
 #ifndef _IXGBE_BYPASS_API_H_
 #define _IXGBE_BYPASS_API_H_
 
-#ifdef RTE_NIC_BYPASS
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
 
 #include "ixgbe_bypass_defines.h"
 /**
@@ -295,6 +295,6 @@ static s32 ixgbe_bypass_rd_eep_generic(struct ixgbe_hw *hw, u32 addr, u8 *value)
 	return 0;
 }
 
-#endif /* RTE_NIC_BYPASS */
+#endif /* RTE_LIBRTE_IXGBE_BYPASS */
 
 #endif /* _IXGBE_BYPASS_API_H_ */
diff --git a/drivers/net/ixgbe/ixgbe_bypass_defines.h b/drivers/net/ixgbe/ixgbe_bypass_defines.h
index cafcb27..d12c271 100644
--- a/drivers/net/ixgbe/ixgbe_bypass_defines.h
+++ b/drivers/net/ixgbe/ixgbe_bypass_defines.h
@@ -34,7 +34,7 @@
 #ifndef _IXGBE_BYPASS_DEFINES_H_
 #define _IXGBE_BYPASS_DEFINES_H_
 
-#ifdef RTE_NIC_BYPASS
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
 
 #define msleep(x)             rte_delay_us(x*1000)
 #define usleep_range(min, max) rte_delay_us(min)
@@ -155,6 +155,6 @@ enum ixgbe_state_t {
 
 #define IXGBE_BYPASS_FW_WRITE_FAILURE	-35
 
-#endif /* RTE_NIC_BYPASS */
+#endif /* RTE_LIBRTE_IXGBE_BYPASS */
 
 #endif /* _IXGBE_BYPASS_DEFINES_H_ */
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 2083cde..9f07e4d 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -481,7 +481,7 @@ static const struct rte_pci_id pci_id_ixgbe_map[] = {
 	{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_1G_T_L) },
 	{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_KX4) },
 	{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_KR) },
-#ifdef RTE_NIC_BYPASS
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
 	{ RTE_PCI_DEVICE(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_BYPASS) },
 #endif
 	{ .vendor_id = 0, /* sentinel */ },
@@ -575,17 +575,6 @@ static const struct eth_dev_ops ixgbe_eth_dev_ops = {
 	.set_queue_rate_limit = ixgbe_set_queue_rate_limit,
 	.reta_update          = ixgbe_dev_rss_reta_update,
 	.reta_query           = ixgbe_dev_rss_reta_query,
-#ifdef RTE_NIC_BYPASS
-	.bypass_init          = ixgbe_bypass_init,
-	.bypass_state_set     = ixgbe_bypass_state_store,
-	.bypass_state_show    = ixgbe_bypass_state_show,
-	.bypass_event_set     = ixgbe_bypass_event_store,
-	.bypass_event_show    = ixgbe_bypass_event_show,
-	.bypass_wd_timeout_set  = ixgbe_bypass_wd_timeout_store,
-	.bypass_wd_timeout_show = ixgbe_bypass_wd_timeout_show,
-	.bypass_ver_show      = ixgbe_bypass_ver_show,
-	.bypass_wd_reset      = ixgbe_bypass_wd_reset,
-#endif /* RTE_NIC_BYPASS */
 	.rss_hash_update      = ixgbe_dev_rss_hash_update,
 	.rss_hash_conf_get    = ixgbe_dev_rss_hash_conf_get,
 	.filter_ctrl          = ixgbe_dev_filter_ctrl,
@@ -1190,11 +1179,11 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev)
 	hw->allow_unsupported_sfp = 1;
 
 	/* Initialize the shared code (base driver) */
-#ifdef RTE_NIC_BYPASS
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
 	diag = ixgbe_bypass_init_shared_code(hw);
 #else
 	diag = ixgbe_init_shared_code(hw);
-#endif /* RTE_NIC_BYPASS */
+#endif /* RTE_LIBRTE_IXGBE_BYPASS */
 
 	if (diag != IXGBE_SUCCESS) {
 		PMD_INIT_LOG(ERR, "Shared code init failed: %d", diag);
@@ -1227,11 +1216,11 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev)
 		return -EIO;
 	}
 
-#ifdef RTE_NIC_BYPASS
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
 	diag = ixgbe_bypass_init_hw(hw);
 #else
 	diag = ixgbe_init_hw(hw);
-#endif /* RTE_NIC_BYPASS */
+#endif /* RTE_LIBRTE_IXGBE_BYPASS */
 
 	/*
 	 * Devices with copper phys will fail to initialise if ixgbe_init_hw()
@@ -2774,7 +2763,7 @@ ixgbe_dev_set_link_up(struct rte_eth_dev *dev)
 	struct ixgbe_hw *hw =
 		IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	if (hw->mac.type == ixgbe_mac_82599EB) {
-#ifdef RTE_NIC_BYPASS
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
 		if (hw->device_id == IXGBE_DEV_ID_82599_BYPASS) {
 			/* Not suported in bypass mode */
 			PMD_INIT_LOG(ERR, "Set link up is not supported "
@@ -2804,7 +2793,7 @@ ixgbe_dev_set_link_down(struct rte_eth_dev *dev)
 	struct ixgbe_hw *hw =
 		IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	if (hw->mac.type == ixgbe_mac_82599EB) {
-#ifdef RTE_NIC_BYPASS
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
 		if (hw->device_id == IXGBE_DEV_ID_82599_BYPASS) {
 			/* Not suported in bypass mode */
 			PMD_INIT_LOG(ERR, "Set link down is not supported "
diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h
index b576a6f..c4fcb9b 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.h
+++ b/drivers/net/ixgbe/ixgbe_ethdev.h
@@ -450,9 +450,9 @@ struct ixgbe_adapter {
 	struct ixgbe_mirror_info    mr_data;
 	struct ixgbe_vf_info        *vfdata;
 	struct ixgbe_uta_info       uta_info;
-#ifdef RTE_NIC_BYPASS
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
 	struct ixgbe_bypass_info    bps;
-#endif /* RTE_NIC_BYPASS */
+#endif /* RTE_LIBRTE_IXGBE_BYPASS */
 	struct ixgbe_filter_info    filter;
 	struct ixgbe_l2_tn_info     l2_tn;
 	struct ixgbe_bw_conf        bw_conf;
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.c b/drivers/net/ixgbe/rte_pmd_ixgbe.c
index e8fc9a6..efcaf68 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.c
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.c
@@ -908,3 +908,109 @@ rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port,
 
 	return 0;
 }
+
+#ifdef RTE_LIBRTE_IXGBE_BYPASS
+int
+rte_pmd_ixgbe_bypass_init(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	ixgbe_bypass_init(dev);
+	return 0;
+}
+
+int
+rte_pmd_ixgbe_bypass_state_show(uint8_t port_id, uint32_t *state)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	return ixgbe_bypass_state_show(dev, state);
+}
+
+int
+rte_pmd_ixgbe_bypass_state_set(uint8_t port_id, uint32_t *new_state)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	return ixgbe_bypass_state_store(dev, new_state);
+}
+
+int
+rte_pmd_ixgbe_bypass_event_show(uint8_t port_id,
+				uint32_t event,
+				uint32_t *state)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	return ixgbe_bypass_event_show(dev, event, state);
+}
+
+int
+rte_pmd_ixgbe_bypass_event_store(uint8_t port_id,
+				 uint32_t event,
+				 uint32_t state)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	return ixgbe_bypass_event_store(dev, event, state);
+}
+
+int
+rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port_id, uint32_t timeout)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	return ixgbe_bypass_wd_timeout_store(dev, timeout);
+}
+
+int
+rte_pmd_ixgbe_bypass_ver_show(uint8_t port_id, uint32_t *ver)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	return ixgbe_bypass_ver_show(dev, ver);
+}
+
+int
+rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port_id, uint32_t *wd_timeout)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	return ixgbe_bypass_wd_timeout_show(dev, wd_timeout);
+}
+
+int
+rte_pmd_ixgbe_bypass_wd_reset(uint8_t port_id)
+{
+	struct rte_eth_dev *dev;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+	dev = &rte_eth_devices[port_id];
+	return ixgbe_bypass_wd_reset(dev);
+}
+#endif
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h
index 1f2b1bd..d33c285 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.h
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h
@@ -427,6 +427,177 @@ int rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port,
 				  uint8_t tc_num,
 				  uint8_t *bw_weight);
 
+
+/**
+ * Initialize bypass logic. This function needs to be called before
+ * executing any other bypass API.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_init(uint8_t port);
+
+/**
+ * Return bypass state.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param state
+ *   The return bypass state.
+ *   - (1) Normal mode
+ *   - (2) Bypass mode
+ *   - (3) Isolate mode
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_state_show(uint8_t port, uint32_t *state);
+
+/**
+ * Set bypass state
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param new_state
+ *   The current bypass state.
+ *   - (1) Normal mode
+ *   - (2) Bypass mode
+ *   - (3) Isolate mode
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_state_set(uint8_t port, uint32_t *new_state);
+
+/**
+ * Return bypass state when given event occurs.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param event
+ *   The bypass event
+ *   - (1) Main power on (power button is pushed)
+ *   - (2) Auxiliary power on (power supply is being plugged)
+ *   - (3) Main power off (system shutdown and power supply is left plugged in)
+ *   - (4) Auxiliary power off (power supply is being unplugged)
+ *   - (5) Display or set the watchdog timer
+ * @param state
+ *   The bypass state when given event occurred.
+ *   - (1) Normal mode
+ *   - (2) Bypass mode
+ *   - (3) Isolate mode
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_event_show(uint8_t port,
+				    uint32_t event,
+				    uint32_t *state);
+
+/**
+ * Set bypass state when given event occurs.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param event
+ *   The bypass event
+ *   - (1) Main power on (power button is pushed)
+ *   - (2) Auxiliary power on (power supply is being plugged)
+ *   - (3) Main power off (system shutdown and power supply is left plugged in)
+ *   - (4) Auxiliary power off (power supply is being unplugged)
+ *   - (5) Display or set the watchdog timer
+ * @param state
+ *   The assigned state when given event occurs.
+ *   - (1) Normal mode
+ *   - (2) Bypass mode
+ *   - (3) Isolate mode
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_event_store(uint8_t port,
+				     uint32_t event,
+				     uint32_t state);
+
+/**
+ * Set bypass watchdog timeout count.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param timeout
+ *   The timeout to be set.
+ *   - (0) 0 seconds (timer is off)
+ *   - (1) 1.5 seconds
+ *   - (2) 2 seconds
+ *   - (3) 3 seconds
+ *   - (4) 4 seconds
+ *   - (5) 8 seconds
+ *   - (6) 16 seconds
+ *   - (7) 32 seconds
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port, uint32_t timeout);
+
+/**
+ * Get bypass firmware version.
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param ver
+ *   The firmware version
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_ver_show(uint8_t port, uint32_t *ver);
+
+/**
+ * Return bypass watchdog timeout in seconds
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @param wd_timeout
+ *   The return watchdog timeout. "0" represents timer expired
+ *   - (0) 0 seconds (timer is off)
+ *   - (1) 1.5 seconds
+ *   - (2) 2 seconds
+ *   - (3) 3 seconds
+ *   - (4) 4 seconds
+ *   - (5) 8 seconds
+ *   - (6) 16 seconds
+ *   - (7) 32 seconds
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout);
+
+/**
+ * Reset bypass watchdog timer
+ *
+ * @param port
+ *   The port identifier of the Ethernet device.
+ * @return
+ *   - (0) if successful.
+ *   - (-ENOTSUP) if hardware doesn't support.
+ *   - (-EINVAL) if bad parameter.
+ */
+int rte_pmd_ixgbe_bypass_wd_reset(uint8_t port);
+
+
 /**
  * Response sent back to ixgbe driver from user app after callback
  */
@@ -446,4 +617,48 @@ struct rte_pmd_ixgbe_mb_event_param {
 	uint16_t retval;   /**< return value */
 	void *msg;         /**< pointer to message */
 };
+enum {
+	RTE_PMD_IXGBE_BYPASS_MODE_NONE,
+	RTE_PMD_IXGBE_BYPASS_MODE_NORMAL,
+	RTE_PMD_IXGBE_BYPASS_MODE_BYPASS,
+	RTE_PMD_IXGBE_BYPASS_MODE_ISOLATE,
+	RTE_PMD_IXGBE_BYPASS_MODE_NUM,
+};
+
+#define RTE_PMD_IXGBE_BYPASS_MODE_VALID(x)        \
+	((x) > RTE_PMD_IXGBE_BYPASS_MODE_NONE &&  \
+	(x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM)
+
+enum {
+	RTE_PMD_IXGBE_BYPASS_EVENT_NONE,
+	RTE_PMD_IXGBE_BYPASS_EVENT_START,
+	RTE_PMD_IXGBE_BYPASS_EVENT_OS_ON = RTE_PMD_IXGBE_BYPASS_EVENT_START,
+	RTE_PMD_IXGBE_BYPASS_EVENT_POWER_ON,
+	RTE_PMD_IXGBE_BYPASS_EVENT_OS_OFF,
+	RTE_PMD_IXGBE_BYPASS_EVENT_POWER_OFF,
+	RTE_PMD_IXGBE_BYPASS_EVENT_TIMEOUT,
+	RTE_PMD_IXGBE_BYPASS_EVENT_NUM
+};
+
+#define RTE_PMD_IXGBE_BYPASS_EVENT_VALID(x)       \
+	((x) > RTE_PMD_IXGBE_BYPASS_EVENT_NONE && \
+	(x) < RTE_PMD_IXGBE_BYPASS_MODE_NUM)
+
+enum {
+	RTE_PMD_IXGBE_BYPASS_TMT_OFF,     /* timeout disabled. */
+	RTE_PMD_IXGBE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */
+	RTE_PMD_IXGBE_BYPASS_TMT_2_SEC,   /* timeout for 2 seconds */
+	RTE_PMD_IXGBE_BYPASS_TMT_3_SEC,   /* timeout for 3 seconds */
+	RTE_PMD_IXGBE_BYPASS_TMT_4_SEC,   /* timeout for 4 seconds */
+	RTE_PMD_IXGBE_BYPASS_TMT_8_SEC,   /* timeout for 8 seconds */
+	RTE_PMD_IXGBE_BYPASS_TMT_16_SEC,  /* timeout for 16 seconds */
+	RTE_PMD_IXGBE_BYPASS_TMT_32_SEC,  /* timeout for 32 seconds */
+	RTE_PMD_IXGBE_BYPASS_TMT_NUM
+};
+
+#define RTE_PMD_IXGBE_BYPASS_TMT_VALID(x)       \
+	((x) == RTE_PMD_IXGBE_BYPASS_TMT_OFF || \
+	((x) > RTE_PMD_IXGBE_BYPASS_TMT_OFF &&  \
+	(x) < RTE_PMD_IXGBE_BYPASS_TMT_NUM))
+
 #endif /* _PMD_IXGBE_H_ */
diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map b/drivers/net/ixgbe/rte_pmd_ixgbe_version.map
index 45a57e3..bf77674 100644
--- a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe_version.map
@@ -38,3 +38,17 @@ DPDK_17.05 {
 	rte_pmd_ixgbe_ping_vf;
 	rte_pmd_ixgbe_set_tc_bw_alloc;
 } DPDK_17.02;
+
+DPDK_17.08 {
+	global:
+
+	rte_pmd_ixgbe_bypass_event_show;
+	rte_pmd_ixgbe_bypass_event_store;
+	rte_pmd_ixgbe_bypass_init;
+	rte_pmd_ixgbe_bypass_state_set;
+	rte_pmd_ixgbe_bypass_state_show;
+	rte_pmd_ixgbe_bypass_ver_show;
+	rte_pmd_ixgbe_bypass_wd_reset;
+	rte_pmd_ixgbe_bypass_wd_timeout_show;
+	rte_pmd_ixgbe_bypass_wd_timeout_store;
+} DPDK_17.05;
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 83898a8..d257406 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -2872,128 +2872,6 @@ rte_eth_dev_rx_intr_disable(uint8_t port_id,
 	return (*dev->dev_ops->rx_queue_intr_disable)(dev, queue_id);
 }
 
-#ifdef RTE_NIC_BYPASS
-int rte_eth_dev_bypass_init(uint8_t port_id)
-{
-	struct rte_eth_dev *dev;
-
-	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
-	dev = &rte_eth_devices[port_id];
-	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_init, -ENOTSUP);
-	(*dev->dev_ops->bypass_init)(dev);
-	return 0;
-}
-
-int
-rte_eth_dev_bypass_state_show(uint8_t port_id, uint32_t *state)
-{
-	struct rte_eth_dev *dev;
-
-	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
-	dev = &rte_eth_devices[port_id];
-	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_state_show, -ENOTSUP);
-	(*dev->dev_ops->bypass_state_show)(dev, state);
-	return 0;
-}
-
-int
-rte_eth_dev_bypass_state_set(uint8_t port_id, uint32_t *new_state)
-{
-	struct rte_eth_dev *dev;
-
-	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
-	dev = &rte_eth_devices[port_id];
-	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_state_set, -ENOTSUP);
-	(*dev->dev_ops->bypass_state_set)(dev, new_state);
-	return 0;
-}
-
-int
-rte_eth_dev_bypass_event_show(uint8_t port_id, uint32_t event, uint32_t *state)
-{
-	struct rte_eth_dev *dev;
-
-	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
-	dev = &rte_eth_devices[port_id];
-	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_state_show, -ENOTSUP);
-	(*dev->dev_ops->bypass_event_show)(dev, event, state);
-	return 0;
-}
-
-int
-rte_eth_dev_bypass_event_store(uint8_t port_id, uint32_t event, uint32_t state)
-{
-	struct rte_eth_dev *dev;
-
-	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
-	dev = &rte_eth_devices[port_id];
-
-	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_event_set, -ENOTSUP);
-	(*dev->dev_ops->bypass_event_set)(dev, event, state);
-	return 0;
-}
-
-int
-rte_eth_dev_wd_timeout_store(uint8_t port_id, uint32_t timeout)
-{
-	struct rte_eth_dev *dev;
-
-	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
-	dev = &rte_eth_devices[port_id];
-
-	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_wd_timeout_set, -ENOTSUP);
-	(*dev->dev_ops->bypass_wd_timeout_set)(dev, timeout);
-	return 0;
-}
-
-int
-rte_eth_dev_bypass_ver_show(uint8_t port_id, uint32_t *ver)
-{
-	struct rte_eth_dev *dev;
-
-	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
-	dev = &rte_eth_devices[port_id];
-
-	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_ver_show, -ENOTSUP);
-	(*dev->dev_ops->bypass_ver_show)(dev, ver);
-	return 0;
-}
-
-int
-rte_eth_dev_bypass_wd_timeout_show(uint8_t port_id, uint32_t *wd_timeout)
-{
-	struct rte_eth_dev *dev;
-
-	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
-	dev = &rte_eth_devices[port_id];
-
-	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_wd_timeout_show, -ENOTSUP);
-	(*dev->dev_ops->bypass_wd_timeout_show)(dev, wd_timeout);
-	return 0;
-}
-
-int
-rte_eth_dev_bypass_wd_reset(uint8_t port_id)
-{
-	struct rte_eth_dev *dev;
-
-	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
-
-	dev = &rte_eth_devices[port_id];
-
-	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->bypass_wd_reset, -ENOTSUP);
-	(*dev->dev_ops->bypass_wd_reset)(dev);
-	return 0;
-}
-#endif
 
 int
 rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type)
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 0f38b45..9c79c36 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1381,59 +1381,6 @@ typedef int (*eth_l2_tunnel_offload_set_t)
 	 uint8_t en);
 /**< @internal enable/disable the l2 tunnel offload functions */
 
-#ifdef RTE_NIC_BYPASS
-
-enum {
-	RTE_BYPASS_MODE_NONE,
-	RTE_BYPASS_MODE_NORMAL,
-	RTE_BYPASS_MODE_BYPASS,
-	RTE_BYPASS_MODE_ISOLATE,
-	RTE_BYPASS_MODE_NUM,
-};
-
-#define	RTE_BYPASS_MODE_VALID(x)	\
-	((x) > RTE_BYPASS_MODE_NONE && (x) < RTE_BYPASS_MODE_NUM)
-
-enum {
-	RTE_BYPASS_EVENT_NONE,
-	RTE_BYPASS_EVENT_START,
-	RTE_BYPASS_EVENT_OS_ON = RTE_BYPASS_EVENT_START,
-	RTE_BYPASS_EVENT_POWER_ON,
-	RTE_BYPASS_EVENT_OS_OFF,
-	RTE_BYPASS_EVENT_POWER_OFF,
-	RTE_BYPASS_EVENT_TIMEOUT,
-	RTE_BYPASS_EVENT_NUM
-};
-
-#define	RTE_BYPASS_EVENT_VALID(x)	\
-	((x) > RTE_BYPASS_EVENT_NONE && (x) < RTE_BYPASS_MODE_NUM)
-
-enum {
-	RTE_BYPASS_TMT_OFF,     /* timeout disabled. */
-	RTE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */
-	RTE_BYPASS_TMT_2_SEC,   /* timeout for 2 seconds */
-	RTE_BYPASS_TMT_3_SEC,   /* timeout for 3 seconds */
-	RTE_BYPASS_TMT_4_SEC,   /* timeout for 4 seconds */
-	RTE_BYPASS_TMT_8_SEC,   /* timeout for 8 seconds */
-	RTE_BYPASS_TMT_16_SEC,  /* timeout for 16 seconds */
-	RTE_BYPASS_TMT_32_SEC,  /* timeout for 32 seconds */
-	RTE_BYPASS_TMT_NUM
-};
-
-#define	RTE_BYPASS_TMT_VALID(x)	\
-	((x) == RTE_BYPASS_TMT_OFF || \
-	((x) > RTE_BYPASS_TMT_OFF && (x) < RTE_BYPASS_TMT_NUM))
-
-typedef void (*bypass_init_t)(struct rte_eth_dev *dev);
-typedef int32_t (*bypass_state_set_t)(struct rte_eth_dev *dev, uint32_t *new_state);
-typedef int32_t (*bypass_state_show_t)(struct rte_eth_dev *dev, uint32_t *state);
-typedef int32_t (*bypass_event_set_t)(struct rte_eth_dev *dev, uint32_t state, uint32_t event);
-typedef int32_t (*bypass_event_show_t)(struct rte_eth_dev *dev, uint32_t event_shift, uint32_t *event);
-typedef int32_t (*bypass_wd_timeout_set_t)(struct rte_eth_dev *dev, uint32_t timeout);
-typedef int32_t (*bypass_wd_timeout_show_t)(struct rte_eth_dev *dev, uint32_t *wd_timeout);
-typedef int32_t (*bypass_ver_show_t)(struct rte_eth_dev *dev, uint32_t *ver);
-typedef int32_t (*bypass_wd_reset_t)(struct rte_eth_dev *dev);
-#endif
 
 typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev,
 				 enum rte_filter_type filter_type,
@@ -1540,18 +1487,6 @@ struct eth_dev_ops {
 	eth_get_eeprom_t           get_eeprom;        /**< Get eeprom data. */
 	eth_set_eeprom_t           set_eeprom;        /**< Set eeprom. */
 
-	/* bypass control */
-#ifdef RTE_NIC_BYPASS
-	bypass_init_t              bypass_init;
-	bypass_state_set_t         bypass_state_set;
-	bypass_state_show_t        bypass_state_show;
-	bypass_event_set_t         bypass_event_set;
-	bypass_event_show_t        bypass_event_show;
-	bypass_wd_timeout_set_t    bypass_wd_timeout_set;
-	bypass_wd_timeout_show_t   bypass_wd_timeout_show;
-	bypass_ver_show_t          bypass_ver_show;
-	bypass_wd_reset_t          bypass_wd_reset;
-#endif
 
 	eth_filter_ctrl_t          filter_ctrl; /**< common filter control. */
 
@@ -3827,171 +3762,6 @@ int rte_eth_mirror_rule_reset(uint8_t port_id,
 int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
 			uint16_t tx_rate);
 
-/**
- * Initialize bypass logic. This function needs to be called before
- * executing any other bypass API.
- *
- * @param port
- *   The port identifier of the Ethernet device.
- * @return
- *   - (0) if successful.
- *   - (-ENOTSUP) if hardware doesn't support.
- *   - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_init(uint8_t port);
-
-/**
- * Return bypass state.
- *
- * @param port
- *   The port identifier of the Ethernet device.
- * @param state
- *   The return bypass state.
- *   - (1) Normal mode
- *   - (2) Bypass mode
- *   - (3) Isolate mode
- * @return
- *   - (0) if successful.
- *   - (-ENOTSUP) if hardware doesn't support.
- *   - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_state_show(uint8_t port, uint32_t *state);
-
-/**
- * Set bypass state
- *
- * @param port
- *   The port identifier of the Ethernet device.
- * @param new_state
- *   The current bypass state.
- *   - (1) Normal mode
- *   - (2) Bypass mode
- *   - (3) Isolate mode
- * @return
- *   - (0) if successful.
- *   - (-ENOTSUP) if hardware doesn't support.
- *   - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_state_set(uint8_t port, uint32_t *new_state);
-
-/**
- * Return bypass state when given event occurs.
- *
- * @param port
- *   The port identifier of the Ethernet device.
- * @param event
- *   The bypass event
- *   - (1) Main power on (power button is pushed)
- *   - (2) Auxiliary power on (power supply is being plugged)
- *   - (3) Main power off (system shutdown and power supply is left plugged in)
- *   - (4) Auxiliary power off (power supply is being unplugged)
- *   - (5) Display or set the watchdog timer
- * @param state
- *   The bypass state when given event occurred.
- *   - (1) Normal mode
- *   - (2) Bypass mode
- *   - (3) Isolate mode
- * @return
- *   - (0) if successful.
- *   - (-ENOTSUP) if hardware doesn't support.
- *   - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_event_show(uint8_t port, uint32_t event, uint32_t *state);
-
-/**
- * Set bypass state when given event occurs.
- *
- * @param port
- *   The port identifier of the Ethernet device.
- * @param event
- *   The bypass event
- *   - (1) Main power on (power button is pushed)
- *   - (2) Auxiliary power on (power supply is being plugged)
- *   - (3) Main power off (system shutdown and power supply is left plugged in)
- *   - (4) Auxiliary power off (power supply is being unplugged)
- *   - (5) Display or set the watchdog timer
- * @param state
- *   The assigned state when given event occurs.
- *   - (1) Normal mode
- *   - (2) Bypass mode
- *   - (3) Isolate mode
- * @return
- *   - (0) if successful.
- *   - (-ENOTSUP) if hardware doesn't support.
- *   - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_event_store(uint8_t port, uint32_t event, uint32_t state);
-
-/**
- * Set bypass watchdog timeout count.
- *
- * @param port
- *   The port identifier of the Ethernet device.
- * @param timeout
- *   The timeout to be set.
- *   - (0) 0 seconds (timer is off)
- *   - (1) 1.5 seconds
- *   - (2) 2 seconds
- *   - (3) 3 seconds
- *   - (4) 4 seconds
- *   - (5) 8 seconds
- *   - (6) 16 seconds
- *   - (7) 32 seconds
- * @return
- *   - (0) if successful.
- *   - (-ENOTSUP) if hardware doesn't support.
- *   - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_wd_timeout_store(uint8_t port, uint32_t timeout);
-
-/**
- * Get bypass firmware version.
- *
- * @param port
- *   The port identifier of the Ethernet device.
- * @param ver
- *   The firmware version
- * @return
- *   - (0) if successful.
- *   - (-ENOTSUP) if hardware doesn't support.
- *   - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_ver_show(uint8_t port, uint32_t *ver);
-
-/**
- * Return bypass watchdog timeout in seconds
- *
- * @param port
- *   The port identifier of the Ethernet device.
- * @param wd_timeout
- *   The return watchdog timeout. "0" represents timer expired
- *   - (0) 0 seconds (timer is off)
- *   - (1) 1.5 seconds
- *   - (2) 2 seconds
- *   - (3) 3 seconds
- *   - (4) 4 seconds
- *   - (5) 8 seconds
- *   - (6) 16 seconds
- *   - (7) 32 seconds
- * @return
- *   - (0) if successful.
- *   - (-ENOTSUP) if hardware doesn't support.
- *   - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout);
-
-/**
- * Reset bypass watchdog timer
- *
- * @param port
- *   The port identifier of the Ethernet device.
- * @return
- *   - (0) if successful.
- *   - (-ENOTSUP) if hardware doesn't support.
- *   - (-EINVAL) if bad parameter.
- */
-int rte_eth_dev_bypass_wd_reset(uint8_t port);
-
  /**
  * Configuration of Receive Side Scaling hash computation of Ethernet device.
  *
diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map
index d6726bb..1d22434 100644
--- a/lib/librte_ether/rte_ether_version.map
+++ b/lib/librte_ether/rte_ether_version.map
@@ -10,14 +10,6 @@ DPDK_2.2 {
 	rte_eth_dev_allocate;
 	rte_eth_dev_allocated;
 	rte_eth_dev_attach;
-	rte_eth_dev_bypass_event_show;
-	rte_eth_dev_bypass_event_store;
-	rte_eth_dev_bypass_init;
-	rte_eth_dev_bypass_state_set;
-	rte_eth_dev_bypass_state_show;
-	rte_eth_dev_bypass_ver_show;
-	rte_eth_dev_bypass_wd_reset;
-	rte_eth_dev_bypass_wd_timeout_show;
 	rte_eth_dev_callback_register;
 	rte_eth_dev_callback_unregister;
 	rte_eth_dev_close;
@@ -70,7 +62,6 @@ DPDK_2.2 {
 	rte_eth_dev_uc_all_hash_table_set;
 	rte_eth_dev_uc_hash_table_set;
 	rte_eth_dev_vlan_filter;
-	rte_eth_dev_wd_timeout_store;
 	rte_eth_dma_zone_reserve;
 	rte_eth_led_off;
 	rte_eth_led_on;
-- 
2.7.4