patch "Add USB quirk for HVR-950q to avoid intermittent device resets" added to usb-testing

patch "Add USB quirk for HVR-950q to avoid intermittent device resets" added to usb-testing

[gregkh]

This is a note to let you know that I've just added the patch titled

    Add USB quirk for HVR-950q to avoid intermittent device resets

to my usb git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-testing branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will be merged to the usb-next branch sometime soon,
after it passes testing, and the merge window is open.

If you have any questions about this process, please let me know.


>From 6836796de4019944f4ba4c99a360e8250fd2e735 Mon Sep 17 00:00:00 2001
From: Devin Heitmueller <dheitmueller@kernellabs.com>
Date: Tue, 27 Jun 2017 13:08:51 -0400
Subject: Add USB quirk for HVR-950q to avoid intermittent device resets

The USB core and sysfs will attempt to enumerate certain parameters
which are unsupported by the au0828 - causing inconsistent behavior
and sometimes causing the chip to reset.  Avoid making these calls.

This problem manifested as intermittent cases where the au8522 would
be reset on analog video startup, in particular when starting up ALSA
audio streaming in parallel - the sysfs entries created by
snd-usb-audio on streaming startup would result in unsupported control
messages being sent during tuning which would put the chip into an
unknown state.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/quirks.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 96b21b0dac1e..3116edfcdc18 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -223,6 +223,10 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Blackmagic Design UltraStudio SDI */
 	{ USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM },
 
+	/* Hauppauge HVR-950q */
+	{ USB_DEVICE(0x2040, 0x7200), .driver_info =
+			USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* INTEL VALUE SSD */
 	{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
 
-- 
2.13.2