All of lore.kernel.org
 help / color / mirror / Atom feed
From: Akinobu Mita <akinobu.mita@gmail.com>
To: linux-iio@vger.kernel.org
Cc: Akinobu Mita <akinobu.mita@gmail.com>,
	Daniel Baluta <daniel.baluta@gmail.com>,
	Jonathan Cameron <jic23@kernel.org>
Subject: [PATCH v2 07/11] iio: adc: ti-ads1015: remove unnecessary config register update
Date: Fri, 21 Jul 2017 00:24:23 +0900	[thread overview]
Message-ID: <1500564267-8613-8-git-send-email-akinobu.mita@gmail.com> (raw)
In-Reply-To: <1500564267-8613-1-git-send-email-akinobu.mita@gmail.com>

The ti-ads1015 driver has eight iio voltage channels and each iio channel
can hold own scale information.

The ADS1015 device only have a single config register which contains an
input multiplexer selection, PGA and data rate settings.  So the driver
should load the correct settings when the input multiplexer selection is
changed.

However, regardless of which channlel is currently selected, changing any
iio channel's scale information immediately overwrites the current PGA
setting in the config register.

It is harmless because the correct PGA settings are reloaded just before
getting adc result anyway.  But it is unnecessary register update and
should be removed.

Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
 drivers/iio/adc/ti-ads1015.c | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)

diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
index 9c501e5..e83cebc 100644
--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -312,28 +312,18 @@ static int ads1015_set_scale(struct ads1015_data *data,
 			     struct iio_chan_spec const *chan,
 			     int scale, int uscale)
 {
-	int i, ret, rindex = -1;
+	int i;
 	int fullscale = div_s64((scale * 1000000LL + uscale) <<
 				(chan->scan_type.realbits - 1), 1000000);
 
 	for (i = 0; i < ARRAY_SIZE(ads1015_fullscale_range); i++) {
 		if (ads1015_fullscale_range[i] == fullscale) {
-			rindex = i;
-			break;
+			data->channel_data[chan->address].pga = i;
+			return 0;
 		}
 	}
-	if (rindex < 0)
-		return -EINVAL;
-
-	ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
-				 ADS1015_CFG_PGA_MASK,
-				 rindex << ADS1015_CFG_PGA_SHIFT);
-	if (ret < 0)
-		return ret;
-
-	data->channel_data[chan->address].pga = rindex;
 
-	return 0;
+	return -EINVAL;
 }
 
 static int ads1015_set_data_rate(struct ads1015_data *data, int chan, int rate)
-- 
2.7.4

  parent reply	other threads:[~2017-07-20 15:24 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-20 15:24 [PATCH v2 00/11] iio: adc: ti-ads1015: fixes, cleanups, and threshold event support Akinobu Mita
2017-07-20 15:24 ` [PATCH v2 01/11] iio: adc: ti-ads1015: fix incorrect data rate setting update Akinobu Mita
2017-07-23 11:32   ` Jonathan Cameron
2017-08-20 10:51     ` Jonathan Cameron
2017-07-20 15:24 ` [PATCH v2 02/11] iio: adc: ti-ads1015: fix scale information for ADS1115 Akinobu Mita
2017-08-20 10:53   ` Jonathan Cameron
2017-07-20 15:24 ` [PATCH v2 03/11] iio: adc: ti-ads1015: enable conversion when CONFIG_PM is not set Akinobu Mita
2017-08-20 10:54   ` Jonathan Cameron
2017-07-20 15:24 ` [PATCH v2 04/11] iio: adc: ti-ads1015: avoid getting stale result after runtime resume Akinobu Mita
2017-08-20 10:55   ` Jonathan Cameron
2017-07-20 15:24 ` [PATCH v2 05/11] iio: adc: ti-ads1015: don't return invalid value from buffer setup callbacks Akinobu Mita
2017-08-20 10:56   ` Jonathan Cameron
2017-07-20 15:24 ` [PATCH v2 06/11] iio: adc: ti-ads1015: add adequate wait time to get correct conversion Akinobu Mita
2017-07-23 11:36   ` Jonathan Cameron
2017-08-20 10:57     ` Jonathan Cameron
2017-08-21 21:00       ` Ladislav Michl
2017-08-22 10:03         ` Akinobu Mita
2017-08-22 14:36           ` Ladislav Michl
2017-08-23 13:57             ` Akinobu Mita
2017-07-20 15:24 ` Akinobu Mita [this message]
2017-08-20 10:58   ` [PATCH v2 07/11] iio: adc: ti-ads1015: remove unnecessary config register update Jonathan Cameron
2017-07-20 15:24 ` [PATCH v2 08/11] iio: adc: ti-ads1015: add helper to set conversion mode Akinobu Mita
2017-08-20 10:59   ` Jonathan Cameron
2017-07-20 15:24 ` [PATCH v2 09/11] iio: adc: ti-ads1015: use devm_iio_triggered_buffer_setup Akinobu Mita
2017-08-20 11:00   ` Jonathan Cameron
2017-07-20 15:24 ` [PATCH v2 10/11] iio: adc: ti-ads1015: use iio_device_claim_direct_mode() Akinobu Mita
2017-08-20 11:00   ` Jonathan Cameron
2017-07-20 15:24 ` [PATCH v2 11/11] iio: adc: ti-ads1015: add threshold event support Akinobu Mita
2017-07-23 12:01   ` Jonathan Cameron
2017-08-20 11:05     ` Jonathan Cameron
2017-08-22 10:20       ` Akinobu Mita
2017-08-22 12:35         ` Jonathan Cameron
2017-08-22 12:38         ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1500564267-8613-8-git-send-email-akinobu.mita@gmail.com \
    --to=akinobu.mita@gmail.com \
    --cc=daniel.baluta@gmail.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.