[U-Boot] [PATCH 2/2] sf: Preserve QE bit when clearing BP# bits for Macronix flash

[Bin Meng <bmeng.cn@gmail.com>]

On some flash (like Macronix), QE (quad enable) bit is in the same
status register as BP# bits, and we need preserve its original value
during a reboot cycle as this is required by some platforms (like
Intel ICH SPI controller working under descriptor mode).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---

 drivers/mtd/spi/spi_flash.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 0034a28..7d8c660 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -947,11 +947,24 @@ int spi_flash_scan(struct spi_flash *flash)
 	if (IS_ERR_OR_NULL(info))
 		return -ENOENT;
 
-	/* Flash powers up read-only, so clear BP# bits */
+	/*
+	 * Flash powers up read-only, so clear BP# bits.
+	 *
+	 * Note on some flash (like Macronix), QE (quad enable) bit is in the
+	 * same status register as BP# bits, and we need preserve its original
+	 * value during a reboot cycle as this is required by some platforms
+	 * (like Intel ICH SPI controller working under descriptor mode).
+	 */
 	if (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_ATMEL ||
-	    JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_MACRONIX ||
 	    JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_SST)
 		write_sr(flash, 0);
+	if (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_MACRONIX) {
+		u8 sr = 0;
+
+		read_sr(flash, &sr);
+		sr &= STATUS_QEB_MXIC;
+		write_sr(flash, sr);
+	}
 
 	flash->name = info->name;
 	flash->memory_map = spi->memory_map;
-- 
2.9.2