From mboxrd@z Thu Jan 1 00:00:00 1970 From: Philipp Tomsich Date: Wed, 2 Aug 2017 22:34:12 +0200 Subject: [U-Boot] [PATCH v4 17/66] armv8: spl: Support separate stack for TPL In-Reply-To: <1501706105-7490-1-git-send-email-philipp.tomsich@theobroma-systems.com> References: <1501706105-7490-1-git-send-email-philipp.tomsich@theobroma-systems.com> Message-ID: <1501706105-7490-18-git-send-email-philipp.tomsich@theobroma-systems.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de To allow a TPL and SPL to run from different addresses/memories, we need to split setup of the TPL and SPL stacks. To do so, we introduce CONFIG_TPL_STACK (not listed in Kconfig) which can be used to override the initial stack pointer for TPL. To provide backward compatibility for existing boards, this is added as an optional configuration item and the normal search order (i.e. SPL_STACK, then SYS_STACK) apply if not defined. Signed-off-by: Philipp Tomsich Reviewed-by: Simon Glass Reviewed-by: Tom Rini --- Changes in v4: None Changes in v3: None Changes in v2: None arch/arm/lib/crt0_64.S | 4 +++- scripts/config_whitelist.txt | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S index 57e728f..177b5bf 100644 --- a/arch/arm/lib/crt0_64.S +++ b/arch/arm/lib/crt0_64.S @@ -69,7 +69,9 @@ ENTRY(_main) /* * Set up initial C runtime environment and call board_init_f(0). */ -#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) +#if defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_STACK) + ldr x0, =(CONFIG_TPL_STACK) +#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK) ldr x0, =(CONFIG_SPL_STACK) #else ldr x0, =(CONFIG_SYS_INIT_SP_ADDR) diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 93f0bf4..0a06dff 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -4983,6 +4983,7 @@ CONFIG_TI_SPI_MMAP CONFIG_TMU_TIMER CONFIG_TPL_DRIVERS_MISC_SUPPORT CONFIG_TPL_PAD_TO +CONFIG_TPL_STACK CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_TPS6586X_POWER CONFIG_TQM834X -- 2.1.4