[PATCH] net/liquidio: remove FLR request to PF driver

[Shijith Thotton <shijith.thotton@caviumnetworks.com>]

igb_uio and vfio-pci does pci reset during open and release of device.
So FLR request to LiquidIO PF driver during init and close in PMD is not
required.

See commit b58eedfc7dd5 ("igb_uio: issue FLR during open and release of
device file")

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
---
 drivers/net/liquidio/base/lio_23xx_vf.c | 19 -------------------
 drivers/net/liquidio/base/lio_23xx_vf.h |  2 --
 drivers/net/liquidio/base/lio_mbox.h    |  1 -
 drivers/net/liquidio/lio_ethdev.c       |  8 --------
 4 files changed, 30 deletions(-)

diff --git a/drivers/net/liquidio/base/lio_23xx_vf.c b/drivers/net/liquidio/base/lio_23xx_vf.c
index e30c20d..9978017 100644
--- a/drivers/net/liquidio/base/lio_23xx_vf.c
+++ b/drivers/net/liquidio/base/lio_23xx_vf.c
@@ -379,25 +379,6 @@
 	cn23xx_vf_reset_io_queues(lio_dev, num_queues);
 }
 
-void
-cn23xx_vf_ask_pf_to_do_flr(struct lio_device *lio_dev)
-{
-	struct lio_mbox_cmd mbox_cmd;
-
-	memset(&mbox_cmd, 0, sizeof(struct lio_mbox_cmd));
-	mbox_cmd.msg.s.type = LIO_MBOX_REQUEST;
-	mbox_cmd.msg.s.resp_needed = 0;
-	mbox_cmd.msg.s.cmd = LIO_VF_FLR_REQUEST;
-	mbox_cmd.msg.s.len = 1;
-	mbox_cmd.q_no = 0;
-	mbox_cmd.recv_len = 0;
-	mbox_cmd.recv_status = 0;
-	mbox_cmd.fn = NULL;
-	mbox_cmd.fn_arg = 0;
-
-	lio_mbox_write(lio_dev, &mbox_cmd);
-}
-
 static void
 cn23xx_pfvf_hs_callback(struct lio_device *lio_dev,
 			struct lio_mbox_cmd *cmd, void *arg)
diff --git a/drivers/net/liquidio/base/lio_23xx_vf.h b/drivers/net/liquidio/base/lio_23xx_vf.h
index ad8db0d..83dc053 100644
--- a/drivers/net/liquidio/base/lio_23xx_vf.h
+++ b/drivers/net/liquidio/base/lio_23xx_vf.h
@@ -87,8 +87,6 @@
 
 #define CN23XX_VF_BUSY_READING_REG_LOOP_COUNT	100000
 
-void cn23xx_vf_ask_pf_to_do_flr(struct lio_device *lio_dev);
-
 int cn23xx_pfvf_handshake(struct lio_device *lio_dev);
 
 int cn23xx_vf_setup_device(struct lio_device  *lio_dev);
diff --git a/drivers/net/liquidio/base/lio_mbox.h b/drivers/net/liquidio/base/lio_mbox.h
index b0875d6..f1c5b8e 100644
--- a/drivers/net/liquidio/base/lio_mbox.h
+++ b/drivers/net/liquidio/base/lio_mbox.h
@@ -43,7 +43,6 @@
 #define LIO_MBOX_DATA_MAX			32
 
 #define LIO_VF_ACTIVE				0x1
-#define LIO_VF_FLR_REQUEST			0x2
 #define LIO_CORES_CRASHED			0x3
 
 /* Macro for Read acknowledgment */
diff --git a/drivers/net/liquidio/lio_ethdev.c b/drivers/net/liquidio/lio_ethdev.c
index 479936a..5f3c05e 100644
--- a/drivers/net/liquidio/lio_ethdev.c
+++ b/drivers/net/liquidio/lio_ethdev.c
@@ -1559,9 +1559,6 @@ struct rte_lio_xstats_name_off {
 		rte_write32(pkt_count, droq->pkts_sent_reg);
 	}
 
-	/* Do FLR for the VF */
-	cn23xx_vf_ask_pf_to_do_flr(lio_dev);
-
 	/* lio_free_mbox */
 	lio_dev->fn_list.free_mbox(lio_dev);
 
@@ -1929,11 +1926,6 @@ static int lio_dev_configure(struct rte_eth_dev *eth_dev)
 	if (cn23xx_pfvf_handshake(lio_dev))
 		goto error;
 
-	/* Initial reset */
-	cn23xx_vf_ask_pf_to_do_flr(lio_dev);
-	/* Wait for FLR for 100ms per SRIOV specification */
-	rte_delay_ms(100);
-
 	if (cn23xx_vf_set_io_queues_off(lio_dev)) {
 		lio_dev_err(lio_dev, "Setting io queues off failed\n");
 		goto error;
-- 
1.8.3.1