From mboxrd@z Thu Jan 1 00:00:00 1970 From: Phil Reid Subject: [PATCH v3 0/4] i2c: designware: add i2c gpio recovery option Date: Wed, 30 Aug 2017 14:17:33 +0800 Message-ID: <1504073857-122449-1-git-send-email-preid@electromag.com.au> Return-path: Received: from anchovy3.45ru.net.au ([203.30.46.155]:45745 "EHLO anchovy.45ru.net.au" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1750828AbdH3GRo (ORCPT ); Wed, 30 Aug 2017 02:17:44 -0400 Sender: linux-i2c-owner@vger.kernel.org List-Id: linux-i2c@vger.kernel.org To: jarkko.nikula@linux.intel.com, andriy.shevchenko@linux.intel.com, mika.westerberg@linux.intel.com, wsa@the-dreams.de, tim@krieglstein.org, preid@electromag.com.au, linux-i2c@vger.kernel.org Changes from V1: - In review Andy suggested change the i2c core to use the gpiod I've added a patch that allows the gradual switching of drivers to using gpiod interface. The old interface is preserved so that changes can be made incrementally. - I've update Tim's patch for the designware driver to use the new interface. Tweaked a couple of things to his patch and fixed up things Andy id in last review. The core changes in p1 don't require the get/set scl/sda functions. Hopefully I've done the right thing with preserving authorship and signoff. Changes from V2: - Rebase on https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git/ i2c/for-next No intentional changes, but needed to move i2c_dw_plat_prepare_clk to common for the master recovery functions to use. which is included as two additional patches. Phil Reid (4): i2c: Switch to using gpiod interface for gpio bus recovery i2c: designware: move i2c_dw_plat_prepare_clk to common i2c: designware: rename i2c_dw_plat_prepare_clk to i2c_dw_prepare_clk Tim Sander (1): i2c: designware: add i2c gpio recovery option drivers/i2c/busses/i2c-designware-common.c | 24 ++++++++++-- drivers/i2c/busses/i2c-designware-core.h | 2 + drivers/i2c/busses/i2c-designware-master.c | 57 +++++++++++++++++++++++++++++ drivers/i2c/busses/i2c-designware-platdrv.c | 18 ++------- drivers/i2c/i2c-core-base.c | 22 +++++++++-- include/linux/i2c.h | 2 + 6 files changed, 103 insertions(+), 22 deletions(-) -- 1.8.3.1