[PATCH v3 0/2] stm32 clocksource driver rework

[PATCH v3 0/2] stm32 clocksource driver rework

[Benjamin Gaignard]

version 3:
- fix comments done by Daniel
- use timer_of helper functions

version 2:
- fix uninitialized variable

These patch implements clocksource and clockevent by using only one hardware block.
Getting both clock source and events on the same hardware lead to change quite
a lot driver code.
It also limits usage of clocksource to 32 bits timers because 16 bits ones
aren't enough accurate.
Thanks to timer_fo helpers this series includes minor clean up in structures,
function prototypes and driver name.

Since 16 bits timers become useless it also removes them from stm32f4 and
stm32f7 devicetree.

Benjamin Gaignard (2):
  clocksource: stm32: rework driver to use only one timer
  arm: dts: stm32: remove useless clocksource nodes

 arch/arm/boot/dts/stm32f429.dtsi  |  32 ------
 arch/arm/boot/dts/stm32f746.dtsi  |  32 ------
 drivers/clocksource/Kconfig       |   1 +
 drivers/clocksource/timer-stm32.c | 229 ++++++++++++++++++--------------------
 4 files changed, 112 insertions(+), 182 deletions(-)

-- 
2.7.4

[PATCH v3 0/2] stm32 clocksource driver rework

[Benjamin Gaignard]

version 3:
- fix comments done by Daniel
- use timer_of helper functions

version 2:
- fix uninitialized variable

These patch implements clocksource and clockevent by using only one hardware block.
Getting both clock source and events on the same hardware lead to change quite
a lot driver code.
It also limits usage of clocksource to 32 bits timers because 16 bits ones
aren't enough accurate.
Thanks to timer_fo helpers this series includes minor clean up in structures,
function prototypes and driver name.

Since 16 bits timers become useless it also removes them from stm32f4 and
stm32f7 devicetree.

Benjamin Gaignard (2):
  clocksource: stm32: rework driver to use only one timer
  arm: dts: stm32: remove useless clocksource nodes

 arch/arm/boot/dts/stm32f429.dtsi  |  32 ------
 arch/arm/boot/dts/stm32f746.dtsi  |  32 ------
 drivers/clocksource/Kconfig       |   1 +
 drivers/clocksource/timer-stm32.c | 229 ++++++++++++++++++--------------------
 4 files changed, 112 insertions(+), 182 deletions(-)

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 0/2] stm32 clocksource driver rework

[Benjamin Gaignard]

version 3:
- fix comments done by Daniel
- use timer_of helper functions

version 2:
- fix uninitialized variable

These patch implements clocksource and clockevent by using only one hardware block.
Getting both clock source and events on the same hardware lead to change quite
a lot driver code.
It also limits usage of clocksource to 32 bits timers because 16 bits ones
aren't enough accurate.
Thanks to timer_fo helpers this series includes minor clean up in structures,
function prototypes and driver name.

Since 16 bits timers become useless it also removes them from stm32f4 and
stm32f7 devicetree.

Benjamin Gaignard (2):
  clocksource: stm32: rework driver to use only one timer
  arm: dts: stm32: remove useless clocksource nodes

 arch/arm/boot/dts/stm32f429.dtsi  |  32 ------
 arch/arm/boot/dts/stm32f746.dtsi  |  32 ------
 drivers/clocksource/Kconfig       |   1 +
 drivers/clocksource/timer-stm32.c | 229 ++++++++++++++++++--------------------
 4 files changed, 112 insertions(+), 182 deletions(-)

-- 
2.7.4

[PATCH v3 1/2] clocksource: stm32: add clocksource support

[Benjamin Gaignard]

Rework driver code to be able to implement clocksource and clockevent
on the same hardware block.
Before this patch only the counter of the hardware block was used to 
generate clock events. Now counter will be used to provide a 32 bits
clock source and a comparator will provide clock events.

In addition of that this patch also forbid to use 16 bits timers
because they are not enough accurate.

Use timer_of helpers functions to remove code from probe function
and avoid using proprietary structure.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 drivers/clocksource/Kconfig       |   1 +
 drivers/clocksource/timer-stm32.c | 229 ++++++++++++++++++--------------------
 2 files changed, 112 insertions(+), 118 deletions(-)

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 0a953fc..50d40cb 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -289,6 +289,7 @@ config CLKSRC_STM32
 	bool "Clocksource for STM32 SoCs" if !ARCH_STM32
 	depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
 	select CLKSRC_MMIO
+	select TIMER_OF
 
 config CLKSRC_MPS2
 	bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c
index 8f24237..fb84252 100644
--- a/drivers/clocksource/timer-stm32.c
+++ b/drivers/clocksource/timer-stm32.c
@@ -16,175 +16,168 @@
 #include <linux/of_irq.h>
 #include <linux/clk.h>
 #include <linux/reset.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+#include "timer-of.h"
 
 #define TIM_CR1		0x00
 #define TIM_DIER	0x0c
 #define TIM_SR		0x10
 #define TIM_EGR		0x14
+#define TIM_CNT		0x24
 #define TIM_PSC		0x28
 #define TIM_ARR		0x2c
+#define TIM_CCR1	0x34
 
 #define TIM_CR1_CEN	BIT(0)
-#define TIM_CR1_OPM	BIT(3)
+#define TIM_CR1_UDIS	BIT(1)
 #define TIM_CR1_ARPE	BIT(7)
 
-#define TIM_DIER_UIE	BIT(0)
-
-#define TIM_SR_UIF	BIT(0)
+#define TIM_DIER_CC1IE	BIT(1)
 
 #define TIM_EGR_UG	BIT(0)
 
-struct stm32_clock_event_ddata {
-	struct clock_event_device evtdev;
-	unsigned periodic_top;
-	void __iomem *base;
-};
-
-static int stm32_clock_event_shutdown(struct clock_event_device *evtdev)
+static int stm32_clock_event_shutdown(struct clock_event_device *evt)
 {
-	struct stm32_clock_event_ddata *data =
-		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
-	void *base = data->base;
+	struct timer_of *to = to_timer_of(evt);
+
+	writel_relaxed(0, timer_of_base(to) + TIM_DIER);
 
-	writel_relaxed(0, base + TIM_CR1);
 	return 0;
 }
 
-static int stm32_clock_event_set_periodic(struct clock_event_device *evtdev)
+static int stm32_clock_event_set_next_event(unsigned long evt,
+					    struct clock_event_device *clkevt)
 {
-	struct stm32_clock_event_ddata *data =
-		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
-	void *base = data->base;
+	struct timer_of *to = to_timer_of(clkevt);
+	unsigned long cnt;
+
+	cnt = readl_relaxed(timer_of_base(to) + TIM_CNT);
+	writel_relaxed(cnt + evt, timer_of_base(to) + TIM_CCR1);
+	writel_relaxed(TIM_DIER_CC1IE, timer_of_base(to) + TIM_DIER);
 
-	writel_relaxed(data->periodic_top, base + TIM_ARR);
-	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_CEN, base + TIM_CR1);
 	return 0;
 }
 
-static int stm32_clock_event_set_next_event(unsigned long evt,
-					    struct clock_event_device *evtdev)
+static int stm32_clock_event_set_periodic(struct clock_event_device *evt)
 {
-	struct stm32_clock_event_ddata *data =
-		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
+	struct timer_of *to = to_timer_of(evt);
 
-	writel_relaxed(evt, data->base + TIM_ARR);
-	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_OPM | TIM_CR1_CEN,
-		       data->base + TIM_CR1);
+	return stm32_clock_event_set_next_event(timer_of_period(to), evt);
+}
 
-	return 0;
+static int stm32_clock_event_set_oneshot(struct clock_event_device *evt)
+{
+	return stm32_clock_event_set_next_event(0, evt);
 }
 
 static irqreturn_t stm32_clock_event_handler(int irq, void *dev_id)
 {
-	struct stm32_clock_event_ddata *data = dev_id;
+	struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+	struct timer_of *to = to_timer_of(evt);
+
+	writel_relaxed(0, timer_of_base(to) + TIM_SR);
 
-	writel_relaxed(0, data->base + TIM_SR);
+	if (clockevent_state_periodic(evt))
+		stm32_clock_event_set_periodic(evt);
+	else
+		stm32_clock_event_shutdown(evt);
 
-	data->evtdev.event_handler(&data->evtdev);
+	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
 }
 
-static struct stm32_clock_event_ddata clock_event_ddata = {
-	.evtdev = {
-		.name = "stm32 clockevent",
-		.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-		.set_state_shutdown = stm32_clock_event_shutdown,
-		.set_state_periodic = stm32_clock_event_set_periodic,
-		.set_state_oneshot = stm32_clock_event_shutdown,
-		.tick_resume = stm32_clock_event_shutdown,
-		.set_next_event = stm32_clock_event_set_next_event,
-		.rating = 200,
-	},
-};
-
-static int __init stm32_clockevent_init(struct device_node *np)
+static void __init stm32_clockevent_init(struct timer_of *to)
 {
-	struct stm32_clock_event_ddata *data = &clock_event_ddata;
-	struct clk *clk;
-	struct reset_control *rstc;
-	unsigned long rate, max_delta;
-	int irq, ret, bits, prescaler = 1;
-
-	clk = of_clk_get(np, 0);
-	if (IS_ERR(clk)) {
-		ret = PTR_ERR(clk);
-		pr_err("failed to get clock for clockevent (%d)\n", ret);
-		goto err_clk_get;
-	}
+	writel_relaxed(0, timer_of_base(to) + TIM_DIER);
+	writel_relaxed(0, timer_of_base(to) + TIM_SR);
 
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		pr_err("failed to enable timer clock for clockevent (%d)\n",
-		       ret);
-		goto err_clk_enable;
-	}
+	clockevents_config_and_register(&to->clkevt,
+					timer_of_rate(to), 0x60, ~0U);
+}
 
-	rate = clk_get_rate(clk);
+static void __iomem *stm32_timer_cnt __read_mostly;
+static u64 notrace stm32_read_sched_clock(void)
+{
+	return readl_relaxed(stm32_timer_cnt);
+}
 
-	rstc = of_reset_control_get(np, NULL);
-	if (!IS_ERR(rstc)) {
-		reset_control_assert(rstc);
-		reset_control_deassert(rstc);
-	}
+static int __init stm32_clocksource_init(struct timer_of *to)
+{
+	writel_relaxed(~0U, timer_of_base(to) + TIM_ARR);
+	writel_relaxed(0, timer_of_base(to) + TIM_PSC);
+	writel_relaxed(0, timer_of_base(to) + TIM_SR);
+	writel_relaxed(0, timer_of_base(to) + TIM_DIER);
+	writel_relaxed(0, timer_of_base(to) + TIM_SR);
+	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_UDIS,
+		       timer_of_base(to) + TIM_CR1);
+
+	/* Make sure that registers are updated */
+	writel_relaxed(TIM_EGR_UG, timer_of_base(to) + TIM_EGR);
+
+	/* Enable controller */
+	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_UDIS | TIM_CR1_CEN,
+		       timer_of_base(to) + TIM_CR1);
+
+	stm32_timer_cnt = timer_of_base(to) + TIM_CNT;
+	sched_clock_register(stm32_read_sched_clock, 32, timer_of_rate(to));
+
+	return clocksource_mmio_init(stm32_timer_cnt, "stm32_timer",
+				     timer_of_rate(to), 250, 32,
+				     clocksource_mmio_readl_up);
+}
 
-	data->base = of_iomap(np, 0);
-	if (!data->base) {
-		ret = -ENXIO;
-		pr_err("failed to map registers for clockevent\n");
-		goto err_iomap;
-	}
+static int __init stm32_timer_init(struct device_node *node)
+{
+	struct reset_control *rstc;
+	unsigned long max_arr;
+	struct timer_of *to;
+	int ret;
 
-	irq = irq_of_parse_and_map(np, 0);
-	if (!irq) {
-		ret = -EINVAL;
-		pr_err("%pOF: failed to get irq.\n", np);
-		goto err_get_irq;
-	}
+	to = kzalloc(sizeof(*to), GFP_KERNEL);
+	if (!to)
+		return -ENOMEM;
 
-	/* Detect whether the timer is 16 or 32 bits */
-	writel_relaxed(~0U, data->base + TIM_ARR);
-	max_delta = readl_relaxed(data->base + TIM_ARR);
-	if (max_delta == ~0U) {
-		prescaler = 1;
-		bits = 32;
-	} else {
-		prescaler = 1024;
-		bits = 16;
-	}
-	writel_relaxed(0, data->base + TIM_ARR);
+	to->flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE;
 
-	writel_relaxed(prescaler - 1, data->base + TIM_PSC);
-	writel_relaxed(TIM_EGR_UG, data->base + TIM_EGR);
-	writel_relaxed(TIM_DIER_UIE, data->base + TIM_DIER);
-	writel_relaxed(0, data->base + TIM_SR);
+	to->clkevt.name = "stm32_clockevent";
+	to->clkevt.rating = 200;
+	to->clkevt.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC;
+	to->clkevt.set_state_shutdown = stm32_clock_event_shutdown;
+	to->clkevt.set_state_periodic = stm32_clock_event_set_periodic;
+	to->clkevt.set_state_oneshot = stm32_clock_event_set_oneshot;
+	to->clkevt.tick_resume = stm32_clock_event_shutdown;
+	to->clkevt.set_next_event = stm32_clock_event_set_next_event;
 
-	data->periodic_top = DIV_ROUND_CLOSEST(rate, prescaler * HZ);
+	to->of_irq.handler = stm32_clock_event_handler;
 
-	clockevents_config_and_register(&data->evtdev,
-					DIV_ROUND_CLOSEST(rate, prescaler),
-					0x1, max_delta);
+	ret = timer_of_init(node, to);
+	if (ret)
+		return ret;
 
-	ret = request_irq(irq, stm32_clock_event_handler, IRQF_TIMER,
-			"stm32 clockevent", data);
-	if (ret) {
-		pr_err("%pOF: failed to request irq.\n", np);
-		goto err_get_irq;
+	rstc = of_reset_control_get(node, NULL);
+	if (!IS_ERR(rstc)) {
+		reset_control_assert(rstc);
+		reset_control_deassert(rstc);
 	}
 
-	pr_info("%pOF: STM32 clockevent driver initialized (%d bits)\n",
-			np, bits);
+	/* Detect whether the timer is 16 or 32 bits */
+	writel_relaxed(~0U, timer_of_base(to) + TIM_ARR);
+	max_arr = readl_relaxed(timer_of_base(to) + TIM_ARR);
+	if (max_arr != ~0U) {
+		pr_err("32 bits timer is needed\n");
+		return -EINVAL;
+	}
 
-	return ret;
+	ret = stm32_clocksource_init(to);
+	if (ret)
+		return ret;
 
-err_get_irq:
-	iounmap(data->base);
-err_iomap:
-	clk_disable_unprepare(clk);
-err_clk_enable:
-	clk_put(clk);
-err_clk_get:
-	return ret;
+	stm32_clockevent_init(to);
+
+	return 0;
 }
 
-TIMER_OF_DECLARE(stm32, "st,stm32-timer", stm32_clockevent_init);
+TIMER_OF_DECLARE(stm32, "st,stm32-timer", stm32_timer_init);
-- 
2.7.4

[PATCH v3 1/2] clocksource: stm32: add clocksource support

[Benjamin Gaignard]

Rework driver code to be able to implement clocksource and clockevent
on the same hardware block.
Before this patch only the counter of the hardware block was used to 
generate clock events. Now counter will be used to provide a 32 bits
clock source and a comparator will provide clock events.

In addition of that this patch also forbid to use 16 bits timers
because they are not enough accurate.

Use timer_of helpers functions to remove code from probe function
and avoid using proprietary structure.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
---
 drivers/clocksource/Kconfig       |   1 +
 drivers/clocksource/timer-stm32.c | 229 ++++++++++++++++++--------------------
 2 files changed, 112 insertions(+), 118 deletions(-)

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 0a953fc..50d40cb 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -289,6 +289,7 @@ config CLKSRC_STM32
 	bool "Clocksource for STM32 SoCs" if !ARCH_STM32
 	depends on OF && ARM && (ARCH_STM32 || COMPILE_TEST)
 	select CLKSRC_MMIO
+	select TIMER_OF
 
 config CLKSRC_MPS2
 	bool "Clocksource for MPS2 SoCs" if COMPILE_TEST
diff --git a/drivers/clocksource/timer-stm32.c b/drivers/clocksource/timer-stm32.c
index 8f24237..fb84252 100644
--- a/drivers/clocksource/timer-stm32.c
+++ b/drivers/clocksource/timer-stm32.c
@@ -16,175 +16,168 @@
 #include <linux/of_irq.h>
 #include <linux/clk.h>
 #include <linux/reset.h>
+#include <linux/sched_clock.h>
+#include <linux/slab.h>
+
+#include "timer-of.h"
 
 #define TIM_CR1		0x00
 #define TIM_DIER	0x0c
 #define TIM_SR		0x10
 #define TIM_EGR		0x14
+#define TIM_CNT		0x24
 #define TIM_PSC		0x28
 #define TIM_ARR		0x2c
+#define TIM_CCR1	0x34
 
 #define TIM_CR1_CEN	BIT(0)
-#define TIM_CR1_OPM	BIT(3)
+#define TIM_CR1_UDIS	BIT(1)
 #define TIM_CR1_ARPE	BIT(7)
 
-#define TIM_DIER_UIE	BIT(0)
-
-#define TIM_SR_UIF	BIT(0)
+#define TIM_DIER_CC1IE	BIT(1)
 
 #define TIM_EGR_UG	BIT(0)
 
-struct stm32_clock_event_ddata {
-	struct clock_event_device evtdev;
-	unsigned periodic_top;
-	void __iomem *base;
-};
-
-static int stm32_clock_event_shutdown(struct clock_event_device *evtdev)
+static int stm32_clock_event_shutdown(struct clock_event_device *evt)
 {
-	struct stm32_clock_event_ddata *data =
-		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
-	void *base = data->base;
+	struct timer_of *to = to_timer_of(evt);
+
+	writel_relaxed(0, timer_of_base(to) + TIM_DIER);
 
-	writel_relaxed(0, base + TIM_CR1);
 	return 0;
 }
 
-static int stm32_clock_event_set_periodic(struct clock_event_device *evtdev)
+static int stm32_clock_event_set_next_event(unsigned long evt,
+					    struct clock_event_device *clkevt)
 {
-	struct stm32_clock_event_ddata *data =
-		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
-	void *base = data->base;
+	struct timer_of *to = to_timer_of(clkevt);
+	unsigned long cnt;
+
+	cnt = readl_relaxed(timer_of_base(to) + TIM_CNT);
+	writel_relaxed(cnt + evt, timer_of_base(to) + TIM_CCR1);
+	writel_relaxed(TIM_DIER_CC1IE, timer_of_base(to) + TIM_DIER);
 
-	writel_relaxed(data->periodic_top, base + TIM_ARR);
-	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_CEN, base + TIM_CR1);
 	return 0;
 }
 
-static int stm32_clock_event_set_next_event(unsigned long evt,
-					    struct clock_event_device *evtdev)
+static int stm32_clock_event_set_periodic(struct clock_event_device *evt)
 {
-	struct stm32_clock_event_ddata *data =
-		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
+	struct timer_of *to = to_timer_of(evt);
 
-	writel_relaxed(evt, data->base + TIM_ARR);
-	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_OPM | TIM_CR1_CEN,
-		       data->base + TIM_CR1);
+	return stm32_clock_event_set_next_event(timer_of_period(to), evt);
+}
 
-	return 0;
+static int stm32_clock_event_set_oneshot(struct clock_event_device *evt)
+{
+	return stm32_clock_event_set_next_event(0, evt);
 }
 
 static irqreturn_t stm32_clock_event_handler(int irq, void *dev_id)
 {
-	struct stm32_clock_event_ddata *data = dev_id;
+	struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+	struct timer_of *to = to_timer_of(evt);
+
+	writel_relaxed(0, timer_of_base(to) + TIM_SR);
 
-	writel_relaxed(0, data->base + TIM_SR);
+	if (clockevent_state_periodic(evt))
+		stm32_clock_event_set_periodic(evt);
+	else
+		stm32_clock_event_shutdown(evt);
 
-	data->evtdev.event_handler(&data->evtdev);
+	evt->event_handler(evt);
 
 	return IRQ_HANDLED;
 }
 
-static struct stm32_clock_event_ddata clock_event_ddata = {
-	.evtdev = {
-		.name = "stm32 clockevent",
-		.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-		.set_state_shutdown = stm32_clock_event_shutdown,
-		.set_state_periodic = stm32_clock_event_set_periodic,
-		.set_state_oneshot = stm32_clock_event_shutdown,
-		.tick_resume = stm32_clock_event_shutdown,
-		.set_next_event = stm32_clock_event_set_next_event,
-		.rating = 200,
-	},
-};
-
-static int __init stm32_clockevent_init(struct device_node *np)
+static void __init stm32_clockevent_init(struct timer_of *to)
 {
-	struct stm32_clock_event_ddata *data = &clock_event_ddata;
-	struct clk *clk;
-	struct reset_control *rstc;
-	unsigned long rate, max_delta;
-	int irq, ret, bits, prescaler = 1;
-
-	clk = of_clk_get(np, 0);
-	if (IS_ERR(clk)) {
-		ret = PTR_ERR(clk);
-		pr_err("failed to get clock for clockevent (%d)\n", ret);
-		goto err_clk_get;
-	}
+	writel_relaxed(0, timer_of_base(to) + TIM_DIER);
+	writel_relaxed(0, timer_of_base(to) + TIM_SR);
 
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		pr_err("failed to enable timer clock for clockevent (%d)\n",
-		       ret);
-		goto err_clk_enable;
-	}
+	clockevents_config_and_register(&to->clkevt,
+					timer_of_rate(to), 0x60, ~0U);
+}
 
-	rate = clk_get_rate(clk);
+static void __iomem *stm32_timer_cnt __read_mostly;
+static u64 notrace stm32_read_sched_clock(void)
+{
+	return readl_relaxed(stm32_timer_cnt);
+}
 
-	rstc = of_reset_control_get(np, NULL);
-	if (!IS_ERR(rstc)) {
-		reset_control_assert(rstc);
-		reset_control_deassert(rstc);
-	}
+static int __init stm32_clocksource_init(struct timer_of *to)
+{
+	writel_relaxed(~0U, timer_of_base(to) + TIM_ARR);
+	writel_relaxed(0, timer_of_base(to) + TIM_PSC);
+	writel_relaxed(0, timer_of_base(to) + TIM_SR);
+	writel_relaxed(0, timer_of_base(to) + TIM_DIER);
+	writel_relaxed(0, timer_of_base(to) + TIM_SR);
+	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_UDIS,
+		       timer_of_base(to) + TIM_CR1);
+
+	/* Make sure that registers are updated */
+	writel_relaxed(TIM_EGR_UG, timer_of_base(to) + TIM_EGR);
+
+	/* Enable controller */
+	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_UDIS | TIM_CR1_CEN,
+		       timer_of_base(to) + TIM_CR1);
+
+	stm32_timer_cnt = timer_of_base(to) + TIM_CNT;
+	sched_clock_register(stm32_read_sched_clock, 32, timer_of_rate(to));
+
+	return clocksource_mmio_init(stm32_timer_cnt, "stm32_timer",
+				     timer_of_rate(to), 250, 32,
+				     clocksource_mmio_readl_up);
+}
 
-	data->base = of_iomap(np, 0);
-	if (!data->base) {
-		ret = -ENXIO;
-		pr_err("failed to map registers for clockevent\n");
-		goto err_iomap;
-	}
+static int __init stm32_timer_init(struct device_node *node)
+{
+	struct reset_control *rstc;
+	unsigned long max_arr;
+	struct timer_of *to;
+	int ret;
 
-	irq = irq_of_parse_and_map(np, 0);
-	if (!irq) {
-		ret = -EINVAL;
-		pr_err("%pOF: failed to get irq.\n", np);
-		goto err_get_irq;
-	}
+	to = kzalloc(sizeof(*to), GFP_KERNEL);
+	if (!to)
+		return -ENOMEM;
 
-	/* Detect whether the timer is 16 or 32 bits */
-	writel_relaxed(~0U, data->base + TIM_ARR);
-	max_delta = readl_relaxed(data->base + TIM_ARR);
-	if (max_delta == ~0U) {
-		prescaler = 1;
-		bits = 32;
-	} else {
-		prescaler = 1024;
-		bits = 16;
-	}
-	writel_relaxed(0, data->base + TIM_ARR);
+	to->flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE;
 
-	writel_relaxed(prescaler - 1, data->base + TIM_PSC);
-	writel_relaxed(TIM_EGR_UG, data->base + TIM_EGR);
-	writel_relaxed(TIM_DIER_UIE, data->base + TIM_DIER);
-	writel_relaxed(0, data->base + TIM_SR);
+	to->clkevt.name = "stm32_clockevent";
+	to->clkevt.rating = 200;
+	to->clkevt.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC;
+	to->clkevt.set_state_shutdown = stm32_clock_event_shutdown;
+	to->clkevt.set_state_periodic = stm32_clock_event_set_periodic;
+	to->clkevt.set_state_oneshot = stm32_clock_event_set_oneshot;
+	to->clkevt.tick_resume = stm32_clock_event_shutdown;
+	to->clkevt.set_next_event = stm32_clock_event_set_next_event;
 
-	data->periodic_top = DIV_ROUND_CLOSEST(rate, prescaler * HZ);
+	to->of_irq.handler = stm32_clock_event_handler;
 
-	clockevents_config_and_register(&data->evtdev,
-					DIV_ROUND_CLOSEST(rate, prescaler),
-					0x1, max_delta);
+	ret = timer_of_init(node, to);
+	if (ret)
+		return ret;
 
-	ret = request_irq(irq, stm32_clock_event_handler, IRQF_TIMER,
-			"stm32 clockevent", data);
-	if (ret) {
-		pr_err("%pOF: failed to request irq.\n", np);
-		goto err_get_irq;
+	rstc = of_reset_control_get(node, NULL);
+	if (!IS_ERR(rstc)) {
+		reset_control_assert(rstc);
+		reset_control_deassert(rstc);
 	}
 
-	pr_info("%pOF: STM32 clockevent driver initialized (%d bits)\n",
-			np, bits);
+	/* Detect whether the timer is 16 or 32 bits */
+	writel_relaxed(~0U, timer_of_base(to) + TIM_ARR);
+	max_arr = readl_relaxed(timer_of_base(to) + TIM_ARR);
+	if (max_arr != ~0U) {
+		pr_err("32 bits timer is needed\n");
+		return -EINVAL;
+	}
 
-	return ret;
+	ret = stm32_clocksource_init(to);
+	if (ret)
+		return ret;
 
-err_get_irq:
-	iounmap(data->base);
-err_iomap:
-	clk_disable_unprepare(clk);
-err_clk_enable:
-	clk_put(clk);
-err_clk_get:
-	return ret;
+	stm32_clockevent_init(to);
+
+	return 0;
 }
 
-TIMER_OF_DECLARE(stm32, "st,stm32-timer", stm32_clockevent_init);
+TIMER_OF_DECLARE(stm32, "st,stm32-timer", stm32_timer_init);
-- 
2.7.4

[PATCH v3 2/2] arm: dts: stm32: remove useless clocksource nodes

[Benjamin Gaignard]

16 bits timers aren't accurate enough to be used as
clocksource, remove them from stm32f4 and stm32f7 devicetree.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
---
 arch/arm/boot/dts/stm32f429.dtsi | 32 --------------------------------
 arch/arm/boot/dts/stm32f746.dtsi | 32 --------------------------------
 2 files changed, 64 deletions(-)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index a8113dc..fd211cb 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -108,14 +108,6 @@
 			};
 		};
 
-		timer3: timer@40000400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000400 0x400>;
-			interrupts = <29>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
-			status = "disabled";
-		};
-
 		timers3: timers@40000400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -137,14 +129,6 @@
 			};
 		};
 
-		timer4: timer@40000800 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000800 0x400>;
-			interrupts = <30>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
-			status = "disabled";
-		};
-
 		timers4: timers@40000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -194,14 +178,6 @@
 			};
 		};
 
-		timer6: timer@40001000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001000 0x400>;
-			interrupts = <54>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
-			status = "disabled";
-		};
-
 		timers6: timers@40001000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -218,14 +194,6 @@
 			};
 		};
 
-		timer7: timer@40001400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001400 0x400>;
-			interrupts = <55>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
-			status = "disabled";
-		};
-
 		timers7: timers@40001400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 4506eb9..c4d0273 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -82,22 +82,6 @@
 			status = "disabled";
 		};
 
-		timer3: timer@40000400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000400 0x400>;
-			interrupts = <29>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
-			status = "disabled";
-		};
-
-		timer4: timer@40000800 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000800 0x400>;
-			interrupts = <30>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
-			status = "disabled";
-		};
-
 		timer5: timer@40000c00 {
 			compatible = "st,stm32-timer";
 			reg = <0x40000c00 0x400>;
@@ -105,22 +89,6 @@
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
 		};
 
-		timer6: timer@40001000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001000 0x400>;
-			interrupts = <54>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
-			status = "disabled";
-		};
-
-		timer7: timer@40001400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001400 0x400>;
-			interrupts = <55>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
-			status = "disabled";
-		};
-
 		rtc: rtc@40002800 {
 			compatible = "st,stm32-rtc";
 			reg = <0x40002800 0x400>;
-- 
2.7.4

[PATCH v3 2/2] arm: dts: stm32: remove useless clocksource nodes

[Benjamin Gaignard]

16 bits timers aren't accurate enough to be used as
clocksource, remove them from stm32f4 and stm32f7 devicetree.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm/boot/dts/stm32f429.dtsi | 32 --------------------------------
 arch/arm/boot/dts/stm32f746.dtsi | 32 --------------------------------
 2 files changed, 64 deletions(-)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index a8113dc..fd211cb 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -108,14 +108,6 @@
 			};
 		};
 
-		timer3: timer@40000400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000400 0x400>;
-			interrupts = <29>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
-			status = "disabled";
-		};
-
 		timers3: timers@40000400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -137,14 +129,6 @@
 			};
 		};
 
-		timer4: timer@40000800 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000800 0x400>;
-			interrupts = <30>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
-			status = "disabled";
-		};
-
 		timers4: timers@40000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -194,14 +178,6 @@
 			};
 		};
 
-		timer6: timer@40001000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001000 0x400>;
-			interrupts = <54>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
-			status = "disabled";
-		};
-
 		timers6: timers@40001000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -218,14 +194,6 @@
 			};
 		};
 
-		timer7: timer@40001400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001400 0x400>;
-			interrupts = <55>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
-			status = "disabled";
-		};
-
 		timers7: timers@40001400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 4506eb9..c4d0273 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -82,22 +82,6 @@
 			status = "disabled";
 		};
 
-		timer3: timer@40000400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000400 0x400>;
-			interrupts = <29>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
-			status = "disabled";
-		};
-
-		timer4: timer@40000800 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000800 0x400>;
-			interrupts = <30>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
-			status = "disabled";
-		};
-
 		timer5: timer@40000c00 {
 			compatible = "st,stm32-timer";
 			reg = <0x40000c00 0x400>;
@@ -105,22 +89,6 @@
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
 		};
 
-		timer6: timer@40001000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001000 0x400>;
-			interrupts = <54>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
-			status = "disabled";
-		};
-
-		timer7: timer@40001400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001400 0x400>;
-			interrupts = <55>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
-			status = "disabled";
-		};
-
 		rtc: rtc@40002800 {
 			compatible = "st,stm32-rtc";
 			reg = <0x40002800 0x400>;
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 2/2] arm: dts: stm32: remove useless clocksource nodes

[Benjamin Gaignard]

16 bits timers aren't accurate enough to be used as
clocksource, remove them from stm32f4 and stm32f7 devicetree.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
---
 arch/arm/boot/dts/stm32f429.dtsi | 32 --------------------------------
 arch/arm/boot/dts/stm32f746.dtsi | 32 --------------------------------
 2 files changed, 64 deletions(-)

diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index a8113dc..fd211cb 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -108,14 +108,6 @@
 			};
 		};
 
-		timer3: timer at 40000400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000400 0x400>;
-			interrupts = <29>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
-			status = "disabled";
-		};
-
 		timers3: timers at 40000400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -137,14 +129,6 @@
 			};
 		};
 
-		timer4: timer at 40000800 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000800 0x400>;
-			interrupts = <30>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
-			status = "disabled";
-		};
-
 		timers4: timers at 40000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -194,14 +178,6 @@
 			};
 		};
 
-		timer6: timer at 40001000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001000 0x400>;
-			interrupts = <54>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
-			status = "disabled";
-		};
-
 		timers6: timers at 40001000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -218,14 +194,6 @@
 			};
 		};
 
-		timer7: timer at 40001400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001400 0x400>;
-			interrupts = <55>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
-			status = "disabled";
-		};
-
 		timers7: timers at 40001400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 4506eb9..c4d0273 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -82,22 +82,6 @@
 			status = "disabled";
 		};
 
-		timer3: timer at 40000400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000400 0x400>;
-			interrupts = <29>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
-			status = "disabled";
-		};
-
-		timer4: timer at 40000800 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000800 0x400>;
-			interrupts = <30>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
-			status = "disabled";
-		};
-
 		timer5: timer at 40000c00 {
 			compatible = "st,stm32-timer";
 			reg = <0x40000c00 0x400>;
@@ -105,22 +89,6 @@
 			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
 		};
 
-		timer6: timer at 40001000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001000 0x400>;
-			interrupts = <54>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
-			status = "disabled";
-		};
-
-		timer7: timer at 40001400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001400 0x400>;
-			interrupts = <55>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
-			status = "disabled";
-		};
-
 		rtc: rtc at 40002800 {
 			compatible = "st,stm32-rtc";
 			reg = <0x40002800 0x400>;
-- 
2.7.4