From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756128AbdJJJao (ORCPT ); Tue, 10 Oct 2017 05:30:44 -0400 Received: from mailgw02.mediatek.com ([210.61.82.184]:9579 "EHLO mailgw02.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1755688AbdJJJam (ORCPT ); Tue, 10 Oct 2017 05:30:42 -0400 X-UUID: 983f28c0fe0c47929e603f6f5c844459-20171010 From: Chaotian Jing To: Ulf Hansson CC: Rob Herring , Mark Rutland , Matthias Brugger , Catalin Marinas , Will Deacon , Chaotian Jing , yong mao , Linus Walleij , Heiner Kallweit , Phong LE , , , , , , Subject: [PATCH v4 00/13] mmc: mediatek: add support of mt2701/mt2712 Date: Tue, 10 Oct 2017 17:30:19 +0800 Message-ID: <1507627831-29323-1-git-send-email-chaotian.jing@mediatek.com> X-Mailer: git-send-email 1.8.1.1.dirty MIME-Version: 1.0 Content-Type: text/plain X-MTK: N Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This serial of patches are adding support of mt2701/mt2712. there are many changes and HW improvement between mt8173 and mt2701/mt2712, below is a list of these changes: 1. enlarge CLKDIV bits from 8 to 12 2. remove the PAD_TUNE register and add a new PAD_TUNE0 register 3. add data sync and async fifo feature 4. add busy_check feature 5. add stop_clk fix 6. add enhance_rx support 7. add a seperate CG of source clock mt2712 supports full of these features, mt2701 supports part of it, and add a "mediatek,latch-ck" to work-around as it do not support stop-clk fix. Note: As Pinctrl/CCF are not ready now, so that current patches do not include DTS part. Changed vs v3: based on Ulf's comments, make the bindings change to be the first patch. Changed vs v2: based on Matthias's comments, merge binding file changes to one patch, add "hs400_tune" flag in dev_comp. Changed vs v1: based on Ulf/Rob/Matthias's comments of DTS binding file, make the binding file clearly and fix probe issue. Chaotian Jing (12): mmc: dt-bindings: Add reg/source_cg/latch-ck for Mediatek MMC bindings mmc: mediatek: add support of mt2701/mt2712 arm64: dts: mt8173: remove "mediatek,mt8135-mmc" from mmc nodes mmc: mediatek: make hs400_tune_response only for mt8173 mmc: mediatek: add pad_tune0 support mmc: mediatek: add async fifo and data tune support mmc: mediatek: add busy_check support mmc: mediatek: add stop_clk fix and enhance_rx support mmc: mediatek: add support of source_cg clock mmc: mediatek: add latch-ck support mmc: mediatek: improve eMMC hs400 mode read performance mmc: mediatek: perfer to use rise edge latching for cmd line Documentation/devicetree/bindings/mmc/mtk-sd.txt | 16 +- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 +- drivers/mmc/host/mtk-sd.c | 301 ++++++++++++++++++++--- 3 files changed, 281 insertions(+), 48 deletions(-) -- 1.8.1.1.dirty From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chaotian Jing Subject: [PATCH v4 00/13] mmc: mediatek: add support of mt2701/mt2712 Date: Tue, 10 Oct 2017 17:30:19 +0800 Message-ID: <1507627831-29323-1-git-send-email-chaotian.jing@mediatek.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Ulf Hansson Cc: Rob Herring , Mark Rutland , Matthias Brugger , Catalin Marinas , Will Deacon , Chaotian Jing , yong mao , Linus Walleij , Heiner Kallweit , Phong LE , linux-mmc@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org, srv_heupstream@mediatek.com List-Id: devicetree@vger.kernel.org This serial of patches are adding support of mt2701/mt2712. there are many changes and HW improvement between mt8173 and mt2701/mt2712, below is a list of these changes: 1. enlarge CLKDIV bits from 8 to 12 2. remove the PAD_TUNE register and add a new PAD_TUNE0 register 3. add data sync and async fifo feature 4. add busy_check feature 5. add stop_clk fix 6. add enhance_rx support 7. add a seperate CG of source clock mt2712 supports full of these features, mt2701 supports part of it, and add a "mediatek,latch-ck" to work-around as it do not support stop-clk fix. Note: As Pinctrl/CCF are not ready now, so that current patches do not include DTS part. Changed vs v3: based on Ulf's comments, make the bindings change to be the first patch. Changed vs v2: based on Matthias's comments, merge binding file changes to one patch, add "hs400_tune" flag in dev_comp. Changed vs v1: based on Ulf/Rob/Matthias's comments of DTS binding file, make the binding file clearly and fix probe issue. Chaotian Jing (12): mmc: dt-bindings: Add reg/source_cg/latch-ck for Mediatek MMC bindings mmc: mediatek: add support of mt2701/mt2712 arm64: dts: mt8173: remove "mediatek,mt8135-mmc" from mmc nodes mmc: mediatek: make hs400_tune_response only for mt8173 mmc: mediatek: add pad_tune0 support mmc: mediatek: add async fifo and data tune support mmc: mediatek: add busy_check support mmc: mediatek: add stop_clk fix and enhance_rx support mmc: mediatek: add support of source_cg clock mmc: mediatek: add latch-ck support mmc: mediatek: improve eMMC hs400 mode read performance mmc: mediatek: perfer to use rise edge latching for cmd line Documentation/devicetree/bindings/mmc/mtk-sd.txt | 16 +- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 +- drivers/mmc/host/mtk-sd.c | 301 ++++++++++++++++++++--- 3 files changed, 281 insertions(+), 48 deletions(-) -- 1.8.1.1.dirty From mboxrd@z Thu Jan 1 00:00:00 1970 From: chaotian.jing@mediatek.com (Chaotian Jing) Date: Tue, 10 Oct 2017 17:30:19 +0800 Subject: [PATCH v4 00/13] mmc: mediatek: add support of mt2701/mt2712 Message-ID: <1507627831-29323-1-git-send-email-chaotian.jing@mediatek.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This serial of patches are adding support of mt2701/mt2712. there are many changes and HW improvement between mt8173 and mt2701/mt2712, below is a list of these changes: 1. enlarge CLKDIV bits from 8 to 12 2. remove the PAD_TUNE register and add a new PAD_TUNE0 register 3. add data sync and async fifo feature 4. add busy_check feature 5. add stop_clk fix 6. add enhance_rx support 7. add a seperate CG of source clock mt2712 supports full of these features, mt2701 supports part of it, and add a "mediatek,latch-ck" to work-around as it do not support stop-clk fix. Note: As Pinctrl/CCF are not ready now, so that current patches do not include DTS part. Changed vs v3: based on Ulf's comments, make the bindings change to be the first patch. Changed vs v2: based on Matthias's comments, merge binding file changes to one patch, add "hs400_tune" flag in dev_comp. Changed vs v1: based on Ulf/Rob/Matthias's comments of DTS binding file, make the binding file clearly and fix probe issue. Chaotian Jing (12): mmc: dt-bindings: Add reg/source_cg/latch-ck for Mediatek MMC bindings mmc: mediatek: add support of mt2701/mt2712 arm64: dts: mt8173: remove "mediatek,mt8135-mmc" from mmc nodes mmc: mediatek: make hs400_tune_response only for mt8173 mmc: mediatek: add pad_tune0 support mmc: mediatek: add async fifo and data tune support mmc: mediatek: add busy_check support mmc: mediatek: add stop_clk fix and enhance_rx support mmc: mediatek: add support of source_cg clock mmc: mediatek: add latch-ck support mmc: mediatek: improve eMMC hs400 mode read performance mmc: mediatek: perfer to use rise edge latching for cmd line Documentation/devicetree/bindings/mmc/mtk-sd.txt | 16 +- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 12 +- drivers/mmc/host/mtk-sd.c | 301 ++++++++++++++++++++--- 3 files changed, 281 insertions(+), 48 deletions(-) -- 1.8.1.1.dirty