All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
To: kishon@ti.com, robh+dt@kernel.org, mark.rutland@arm.com
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Subject: [PATCH v5 1/4] phy: rcar-gen3-usb2: check dr_mode for otg mode
Date: Tue, 10 Oct 2017 18:41:27 +0900	[thread overview]
Message-ID: <1507628490-7944-2-git-send-email-yoshihiro.shimoda.uh@renesas.com> (raw)
In-Reply-To: <1507628490-7944-1-git-send-email-yoshihiro.shimoda.uh@renesas.com>

The previous code assumed a channel has otg capability if a channel
has interrupt property. But, it is not good because:
 - Battery charging feature also needs interrupt property.
 - Some R-Car Gen3 SoCs (e.g. R-Car D3) don't have OTG capability.

So, this patch checks whether usb 2.0 host node has dr_mode property or
not. If it has 'dr_mode = "otg";', this driver enables otg capability.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 54c3429..e00e99a 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -1,7 +1,7 @@
 /*
  * Renesas R-Car Gen3 for USB2.0 PHY driver
  *
- * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015-2017 Renesas Electronics Corporation
  *
  * This is based on the phy-rcar-gen2 driver:
  * Copyright (C) 2014 Renesas Solutions Corp.
@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
+#include <linux/usb/of.h>
 #include <linux/workqueue.h>
 
 /******* USB2.0 Host registers (original offset is +0x200) *******/
@@ -415,13 +416,16 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
 	/* call request_irq for OTG */
 	irq = platform_get_irq(pdev, 0);
 	if (irq >= 0) {
-		int ret;
-
 		INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
 		irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
 				       IRQF_SHARED, dev_name(dev), channel);
 		if (irq < 0)
 			dev_err(dev, "No irq handler (%d)\n", irq);
+	}
+
+	if (of_usb_get_dr_mode_by_phy(dev->of_node, 0) == USB_DR_MODE_OTG) {
+		int ret;
+
 		channel->has_otg = true;
 		channel->extcon = devm_extcon_dev_allocate(dev,
 							rcar_gen3_phy_cable);
-- 
1.9.1

  reply	other threads:[~2017-10-10  9:45 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-10  9:41 [PATCH v5 0/4] phy: rcar-gen3-usb2: add support for r8a77995 Yoshihiro Shimoda
2017-10-10  9:41 ` Yoshihiro Shimoda [this message]
2017-10-10  9:41 ` [PATCH v5 2/4] phy: rcar-gen3-usb2: use enum phy_mode in the role_store() Yoshihiro Shimoda
2017-10-11  7:29   ` Simon Horman
2017-10-11  8:27   ` Kishon Vijay Abraham I
2017-10-11  8:27     ` Kishon Vijay Abraham I
2017-10-12 10:47     ` Yoshihiro Shimoda
2017-10-12 10:47       ` Yoshihiro Shimoda
2017-10-10  9:41 ` [PATCH v5 3/4] phy: rcar-gen3-usb2: add SoC-specific parameter for dedicated pins Yoshihiro Shimoda
2017-10-10  9:41 ` [PATCH v5 4/4] phy: rcar-gen3-usb2: add binding for r8a77995 Yoshihiro Shimoda

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1507628490-7944-2-git-send-email-yoshihiro.shimoda.uh@renesas.com \
    --to=yoshihiro.shimoda.uh@renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.