All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tomasz Duszynski <tdu@semihalf.com>
To: dev@dpdk.org
Cc: mw@semihalf.com, dima@marvell.com, nsamsono@marvell.com,
	Jianbo.liu@arm.org, Tomasz Duszynski <tdu@semihalf.com>,
	Jacek Siuda <jck@semihalf.com>
Subject: [PATCH v4 4/4] test: add mrvl crypto pmd unit tests
Date: Tue, 10 Oct 2017 14:17:22 +0200	[thread overview]
Message-ID: <1507637842-4417-5-git-send-email-tdu@semihalf.com> (raw)
In-Reply-To: <1507637842-4417-1-git-send-email-tdu@semihalf.com>

Add unit tests for MRVL CRYPTO PMD driver.

Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
---
 test/test/test_cryptodev.c                  | 168 ++++++++++++++++++++++++++++
 test/test/test_cryptodev.h                  |   1 +
 test/test/test_cryptodev_aes_test_vectors.h |  72 ++++++++----
 test/test/test_cryptodev_blockcipher.c      |   9 +-
 test/test/test_cryptodev_blockcipher.h      |   1 +
 test/test/test_cryptodev_des_test_vectors.h |  24 ++--
 6 files changed, 242 insertions(+), 33 deletions(-)

diff --git a/test/test/test_cryptodev.c b/test/test/test_cryptodev.c
index df84430..a926779 100644
--- a/test/test/test_cryptodev.c
+++ b/test/test/test_cryptodev.c
@@ -341,6 +341,28 @@ testsuite_setup(void)
 		}
 	}
 
+	/* Create a MRVL device if required */
+	if (gbl_driver_id == rte_cryptodev_driver_id_get(
+			RTE_STR(CRYPTODEV_MRVL_PMD))) {
+#ifndef RTE_LIBRTE_PMD_MRVL_CRYPTO
+		RTE_LOG(ERR, USER1, "CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO must be"
+			" enabled in config file to run this testsuite.\n");
+		return TEST_FAILED;
+#endif
+		nb_devs = rte_cryptodev_device_count_by_driver(
+				rte_cryptodev_driver_id_get(
+				RTE_STR(CRYPTODEV_NAME_MRVL_PMD)));
+		if (nb_devs < 1) {
+			ret = rte_vdev_init(
+				RTE_STR(CRYPTODEV_NAME_MRVL_PMD),
+				NULL);
+
+			TEST_ASSERT(ret == 0, "Failed to create "
+				"instance of pmd : %s",
+				RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
+		}
+	}
+
 #ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER
 	if (gbl_driver_id == rte_cryptodev_driver_id_get(
 			RTE_STR(CRYPTODEV_NAME_SCHEDULER_PMD))) {
@@ -1919,6 +1941,101 @@ test_AES_chain_armv8_all(void)
 	return TEST_SUCCESS;
 }
 
+static int
+test_AES_chain_mrvl_all(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	int status;
+
+	status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+		ts_params->op_mpool,
+		ts_params->session_mpool,
+		ts_params->valid_devs[0],
+		rte_cryptodev_driver_id_get(
+		RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+		BLKCIPHER_AES_CHAIN_TYPE);
+
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_AES_cipheronly_mrvl_all(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	int status;
+
+	status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+		ts_params->op_mpool,
+		ts_params->session_mpool,
+		ts_params->valid_devs[0],
+		rte_cryptodev_driver_id_get(
+		RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+		BLKCIPHER_AES_CIPHERONLY_TYPE);
+
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_authonly_mrvl_all(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	int status;
+
+	status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+		ts_params->op_mpool,
+		ts_params->session_mpool,
+		ts_params->valid_devs[0],
+		rte_cryptodev_driver_id_get(
+		RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+		BLKCIPHER_AUTHONLY_TYPE);
+
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_3DES_chain_mrvl_all(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	int status;
+
+	status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+		ts_params->op_mpool,
+		ts_params->session_mpool,
+		ts_params->valid_devs[0],
+		rte_cryptodev_driver_id_get(
+		RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+		BLKCIPHER_3DES_CHAIN_TYPE);
+
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	return TEST_SUCCESS;
+}
+
+static int
+test_3DES_cipheronly_mrvl_all(void)
+{
+	struct crypto_testsuite_params *ts_params = &testsuite_params;
+	int status;
+
+	status = test_blockcipher_all_tests(ts_params->mbuf_pool,
+		ts_params->op_mpool,
+		ts_params->session_mpool,
+		ts_params->valid_devs[0],
+		rte_cryptodev_driver_id_get(
+		RTE_STR(CRYPTODEV_NAME_MRVL_PMD)),
+		BLKCIPHER_3DES_CIPHERONLY_TYPE);
+
+	TEST_ASSERT_EQUAL(status, 0, "Test failed");
+
+	return TEST_SUCCESS;
+}
+
 /* ***** SNOW 3G Tests ***** */
 static int
 create_wireless_algo_hash_session(uint8_t dev_id,
@@ -9417,6 +9534,40 @@ static struct unit_test_suite cryptodev_armv8_testsuite  = {
 	}
 };
 
+static struct unit_test_suite cryptodev_mrvl_testsuite  = {
+	.suite_name = "Crypto Device Marvell Component Test Suite",
+	.setup = testsuite_setup,
+	.teardown = testsuite_teardown,
+	.unit_test_cases = {
+		TEST_CASE_ST(ut_setup, ut_teardown, test_multi_session),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+				test_multi_session_random_usage),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+				test_AES_chain_mrvl_all),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+				test_AES_cipheronly_mrvl_all),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+				test_authonly_mrvl_all),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+				test_3DES_chain_mrvl_all),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+				test_3DES_cipheronly_mrvl_all),
+
+		/** Negative tests */
+		TEST_CASE_ST(ut_setup, ut_teardown,
+			authentication_verify_HMAC_SHA1_fail_data_corrupt),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+			authentication_verify_HMAC_SHA1_fail_tag_corrupt),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+			auth_decryption_AES128CBC_HMAC_SHA1_fail_data_corrupt),
+		TEST_CASE_ST(ut_setup, ut_teardown,
+			auth_decryption_AES128CBC_HMAC_SHA1_fail_tag_corrupt),
+
+		TEST_CASES_END() /**< NULL terminate unit test array */
+	}
+};
+
+
 static int
 test_cryptodev_qat(void /*argv __rte_unused, int argc __rte_unused*/)
 {
@@ -9561,6 +9712,22 @@ test_cryptodev_armv8(void)
 	return unit_test_suite_runner(&cryptodev_armv8_testsuite);
 }
 
+static int
+test_cryptodev_mrvl(void)
+{
+	gbl_driver_id = rte_cryptodev_driver_id_get(
+			RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
+
+	if (gbl_driver_id == -1) {
+		RTE_LOG(ERR, USER1, "MRVL PMD must be loaded. Check if "
+				"CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO is enabled "
+				"in config file to run this testsuite.\n");
+		return TEST_FAILED;
+	}
+
+	return unit_test_suite_runner(&cryptodev_mrvl_testsuite);
+}
+
 #ifdef RTE_LIBRTE_PMD_CRYPTO_SCHEDULER
 
 static int
@@ -9630,5 +9797,6 @@ REGISTER_TEST_COMMAND(cryptodev_sw_snow3g_autotest, test_cryptodev_sw_snow3g);
 REGISTER_TEST_COMMAND(cryptodev_sw_kasumi_autotest, test_cryptodev_sw_kasumi);
 REGISTER_TEST_COMMAND(cryptodev_sw_zuc_autotest, test_cryptodev_sw_zuc);
 REGISTER_TEST_COMMAND(cryptodev_sw_armv8_autotest, test_cryptodev_armv8);
+REGISTER_TEST_COMMAND(cryptodev_sw_mrvl_autotest, test_cryptodev_mrvl);
 REGISTER_TEST_COMMAND(cryptodev_dpaa2_sec_autotest, test_cryptodev_dpaa2_sec);
 REGISTER_TEST_COMMAND(cryptodev_dpaa_sec_autotest, test_cryptodev_dpaa_sec);
diff --git a/test/test/test_cryptodev.h b/test/test/test_cryptodev.h
index 4509a09..2e9eb0b 100644
--- a/test/test/test_cryptodev.h
+++ b/test/test/test_cryptodev.h
@@ -88,6 +88,7 @@
 #define CRYPTODEV_NAME_ARMV8_PMD	crypto_armv8
 #define CRYPTODEV_NAME_DPAA2_SEC_PMD	crypto_dpaa2_sec
 #define CRYPTODEV_NAME_SCHEDULER_PMD	crypto_scheduler
+#define CRYPTODEV_NAME_MRVL_PMD		crypto_mrvl
 
 /**
  * Write (spread) data from buffer to mbuf data
diff --git a/test/test/test_cryptodev_aes_test_vectors.h b/test/test/test_cryptodev_aes_test_vectors.h
index 0c7e48f..e9773b5 100644
--- a/test/test/test_cryptodev_aes_test_vectors.h
+++ b/test/test/test_cryptodev_aes_test_vectors.h
@@ -1198,7 +1198,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CTR HMAC-SHA1 Decryption Digest "
@@ -1210,7 +1211,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-192-CTR XCBC Encryption Digest",
@@ -1248,7 +1250,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-256-CTR HMAC-SHA1 Decryption Digest "
@@ -1260,7 +1263,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest",
@@ -1272,14 +1276,16 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
 			"(short buffers)",
 		.test_data = &aes_test_data_13,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
@@ -1304,14 +1310,16 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA1 Decryption Digest "
 			"Verify (short buffers)",
 		.test_data = &aes_test_data_13,
 		.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA256 Encryption Digest",
@@ -1323,14 +1331,16 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA256 Encryption Digest "
 			"(short buffers)",
 		.test_data = &aes_test_data_12,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA256 Decryption Digest "
@@ -1343,14 +1353,16 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA256 Decryption Digest "
 			"Verify (short buffers)",
 		.test_data = &aes_test_data_12,
 		.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_ARMV8 |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA512 Encryption Digest",
@@ -1361,7 +1373,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA512 Encryption Digest "
@@ -1393,7 +1406,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA512 Decryption Digest "
@@ -1475,7 +1489,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA384 Decryption Digest "
@@ -1487,7 +1502,8 @@ static const struct blockcipher_test_case aes_chain_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CBC HMAC-SHA1 Encryption Digest "
@@ -1520,7 +1536,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_MB |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CBC Decryption",
@@ -1531,7 +1548,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_MB |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-192-CBC Encryption",
@@ -1572,7 +1590,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_MB |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-256-CBC Decryption",
@@ -1583,7 +1602,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_MB |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-256-CBC OOP Encryption",
@@ -1610,7 +1630,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_MB |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CTR Decryption",
@@ -1621,7 +1642,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_MB |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-192-CTR Encryption",
@@ -1654,7 +1676,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_MB |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-256-CTR Decryption",
@@ -1665,7 +1688,8 @@ static const struct blockcipher_test_case aes_cipheronly_test_cases[] = {
 			BLOCKCIPHER_TEST_TARGET_PMD_MB |
 			BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "AES-128-CTR Encryption (12-byte IV)",
diff --git a/test/test/test_cryptodev_blockcipher.c b/test/test/test_cryptodev_blockcipher.c
index 167d196..9a9fd8b 100644
--- a/test/test/test_cryptodev_blockcipher.c
+++ b/test/test/test_cryptodev_blockcipher.c
@@ -94,6 +94,8 @@ test_blockcipher_one_case(const struct blockcipher_test_case *t,
 			RTE_STR(CRYPTODEV_NAME_DPAA2_SEC_PMD));
 	int dpaa_sec_pmd = rte_cryptodev_driver_id_get(
 			RTE_STR(CRYPTODEV_NAME_DPAA_SEC_PMD));
+	int mrvl_pmd = rte_cryptodev_driver_id_get(
+			RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
 
 	int nb_segs = 1;
 
@@ -119,7 +121,8 @@ test_blockcipher_one_case(const struct blockcipher_test_case *t,
 			driver_id == dpaa_sec_pmd ||
 			driver_id == qat_pmd ||
 			driver_id == openssl_pmd ||
-			driver_id == armv8_pmd) { /* Fall through */
+			driver_id == armv8_pmd ||
+			driver_id == mrvl_pmd) { /* Fall through */
 		digest_len = tdata->digest.len;
 	} else if (driver_id == aesni_mb_pmd ||
 			driver_id == scheduler_pmd) {
@@ -592,6 +595,8 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool,
 			RTE_STR(CRYPTODEV_NAME_AESNI_MB_PMD));
 	int qat_pmd = rte_cryptodev_driver_id_get(
 			RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD));
+	int mrvl_pmd = rte_cryptodev_driver_id_get(
+			RTE_STR(CRYPTODEV_NAME_MRVL_PMD));
 
 	switch (test_type) {
 	case BLKCIPHER_AES_CHAIN_TYPE:
@@ -652,6 +657,8 @@ test_blockcipher_all_tests(struct rte_mempool *mbuf_pool,
 		target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC;
 	else if (driver_id == dpaa_sec_pmd)
 		target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC;
+	else if (driver_id == mrvl_pmd)
+		target_pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_MRVL;
 	else
 		TEST_ASSERT(0, "Unrecognized cryptodev type");
 
diff --git a/test/test/test_cryptodev_blockcipher.h b/test/test/test_cryptodev_blockcipher.h
index b81e559..67c78d4 100644
--- a/test/test/test_cryptodev_blockcipher.h
+++ b/test/test/test_cryptodev_blockcipher.h
@@ -54,6 +54,7 @@
 #define BLOCKCIPHER_TEST_TARGET_PMD_SCHEDULER	0x0010 /* Scheduler */
 #define BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC	0x0020 /* DPAA2_SEC flag */
 #define BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC	0x0040 /* DPAA_SEC flag */
+#define BLOCKCIPHER_TEST_TARGET_PMD_MRVL	0x0080 /* Marvell flag */
 
 #define BLOCKCIPHER_TEST_OP_CIPHER	(BLOCKCIPHER_TEST_OP_ENCRYPT | \
 					BLOCKCIPHER_TEST_OP_DECRYPT)
diff --git a/test/test/test_cryptodev_des_test_vectors.h b/test/test/test_cryptodev_des_test_vectors.h
index ebf8869..05265ae 100644
--- a/test/test/test_cryptodev_des_test_vectors.h
+++ b/test/test/test_cryptodev_des_test_vectors.h
@@ -853,7 +853,8 @@ static const struct blockcipher_test_case des_cipheronly_test_cases[] = {
 		.op_mask = BLOCKCIPHER_TEST_OP_ENCRYPT,
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_MB |
-			BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+			BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "DES-CBC Decryption",
@@ -861,7 +862,8 @@ static const struct blockcipher_test_case des_cipheronly_test_cases[] = {
 		.op_mask = BLOCKCIPHER_TEST_OP_DECRYPT,
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_MB |
-			BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+			BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 
 };
@@ -1100,7 +1102,8 @@ static const struct blockcipher_test_case triple_des_chain_test_cases[] = {
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "3DES-192-CBC HMAC-SHA1 Decryption Digest Verify",
@@ -1109,19 +1112,22 @@ static const struct blockcipher_test_case triple_des_chain_test_cases[] = {
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "3DES-192-CBC SHA1 Encryption Digest",
 		.test_data = &triple_des192cbc_sha1_test_vector,
 		.op_mask = BLOCKCIPHER_TEST_OP_ENC_AUTH_GEN,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "3DES-192-CBC SHA1 Decryption Digest Verify",
 		.test_data = &triple_des192cbc_sha1_test_vector,
 		.op_mask = BLOCKCIPHER_TEST_OP_AUTH_VERIFY_DEC,
-		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL
+		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "3DES-128-CTR HMAC-SHA1 Encryption Digest",
@@ -1237,7 +1243,8 @@ static const struct blockcipher_test_case triple_des_cipheronly_test_cases[] = {
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "3DES-192-CBC Decryption",
@@ -1246,7 +1253,8 @@ static const struct blockcipher_test_case triple_des_cipheronly_test_cases[] = {
 		.pmd_mask = BLOCKCIPHER_TEST_TARGET_PMD_OPENSSL |
 			BLOCKCIPHER_TEST_TARGET_PMD_QAT |
 			BLOCKCIPHER_TEST_TARGET_PMD_DPAA2_SEC |
-			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC
+			BLOCKCIPHER_TEST_TARGET_PMD_DPAA_SEC |
+			BLOCKCIPHER_TEST_TARGET_PMD_MRVL
 	},
 	{
 		.test_descr = "3DES-128-CTR Encryption",
-- 
2.7.4

  parent reply	other threads:[~2017-10-10 12:17 UTC|newest]

Thread overview: 110+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-26  9:39 [PATCH 0/8] add net/crypto mrvl pmd drivers Tomasz Duszynski
2017-09-26  9:39 ` [PATCH 1/8] app: link the whole rte_cfgfile library Tomasz Duszynski
2017-09-26 14:31   ` Bruce Richardson
2017-09-27  7:36     ` Tomasz Duszynski
2017-09-27 12:01       ` Bruce Richardson
2017-09-26  9:39 ` [PATCH 2/8] net/mrvl: add mrvl net pmd driver Tomasz Duszynski
2017-09-26  9:40 ` [PATCH 3/8] doc: add mrvl net pmd documentation Tomasz Duszynski
2017-09-26  9:40 ` [PATCH 4/8] maintainers: add maintainers for the mrvl net pmd Tomasz Duszynski
2017-09-26  9:40 ` [PATCH 5/8] crypto/mrvl: add mrvl crypto pmd driver Tomasz Duszynski
2017-09-26  9:40 ` [PATCH 6/8] doc: add mrvl crypto pmd documentation Tomasz Duszynski
2017-09-26  9:40 ` [PATCH 7/8] maintainers: add maintainers for the mrvl crypto pmd Tomasz Duszynski
2017-09-26  9:40 ` [PATCH 8/8] test: add mrvl crypto pmd unit tests Tomasz Duszynski
2017-09-27  9:40 ` [PATCH 0/8] add net/crypto mrvl pmd drivers De Lara Guarch, Pablo
2017-09-27 10:59   ` Tomasz Duszynski
2017-09-28 10:22 ` [PATCH v2 0/4] add net mrvl pmd driver Tomasz Duszynski
2017-09-28 10:22   ` [PATCH v2 1/4] app: link the whole rte_cfgfile library Tomasz Duszynski
2017-10-03 11:51     ` [PATCH v3 0/4] add net mrvl pmd driver Tomasz Duszynski
2017-10-03 11:51       ` [PATCH v3 1/4] app: link the whole rte_cfgfile library Tomasz Duszynski
2017-10-03 11:51       ` [PATCH v3 2/4] net/mrvl: add mrvl net pmd driver Tomasz Duszynski
2017-10-04  0:24         ` Ferruh Yigit
2017-10-04  8:59           ` Tomasz Duszynski
2017-10-04 16:59             ` Ferruh Yigit
2017-10-05  8:43               ` Tomasz Duszynski
2017-10-05 17:29                 ` Ferruh Yigit
2017-10-06  6:41                   ` Tomasz Duszynski
2017-10-10 21:25                 ` Thomas Monjalon
2017-10-04  0:28         ` Ferruh Yigit
2017-10-04 13:19           ` Tomasz Duszynski
2017-10-05 17:37             ` Ferruh Yigit
2017-10-03 11:51       ` [PATCH v3 3/4] doc: add mrvl net pmd documentation Tomasz Duszynski
2017-10-04  0:29         ` Ferruh Yigit
2017-10-04  7:53           ` Tomasz Duszynski
2017-10-03 11:51       ` [PATCH v3 4/4] maintainers: add maintainers for the mrvl net pmd Tomasz Duszynski
2017-10-09 15:00       ` [PATCH v4 00/16] add net mrvl pmd driver Tomasz Duszynski
2017-10-09 15:00         ` [PATCH v4 01/16] app: link the whole rte_cfgfile library Tomasz Duszynski
2017-10-09 15:00         ` [PATCH v4 02/16] net/mrvl: add mrvl net pmd driver skeleton Tomasz Duszynski
2017-10-11 13:38           ` Thomas Monjalon
2017-10-12  6:51             ` Tomasz Duszynski
2017-10-12  7:59               ` Vincent JARDIN
2017-10-12 12:14                 ` Jacek Siuda
2017-10-12 13:57                   ` Vincent JARDIN
2017-10-09 15:00         ` [PATCH v4 03/16] net/mrvl: add rx/tx support Tomasz Duszynski
2017-10-09 15:00         ` [PATCH v4 04/16] net/mrvl: add link update Tomasz Duszynski
2017-10-09 15:00         ` [PATCH v4 05/16] net/mrvl: add link speed capabilities Tomasz Duszynski
2017-10-09 15:00         ` [PATCH v4 06/16] net/mrvl: add support for updating mtu Tomasz Duszynski
2017-10-09 15:00         ` [PATCH v4 07/16] net/mrvl: add jumbo frame support Tomasz Duszynski
2017-10-09 15:00         ` [PATCH v4 08/16] net/mrvl: add support for promiscuous and allmulticast modes Tomasz Duszynski
2017-10-09 15:00         ` [PATCH v4 09/16] net/mrvl: add support for mac filtering Tomasz Duszynski
2017-10-09 15:00         ` [PATCH v4 10/16] net/mrvl: add rss hashing support Tomasz Duszynski
2017-10-09 15:00         ` [PATCH v4 11/16] net/mrvl: add support for vlan filtering Tomasz Duszynski
2017-10-09 15:00         ` [PATCH v4 12/16] net/mrvl: add crc, l3 and l4 offloads support Tomasz Duszynski
2017-10-09 15:00         ` [PATCH v4 13/16] net/mrvl: add packet type parsing support Tomasz Duszynski
2017-10-09 15:00         ` [PATCH v4 14/16] net/mrvl: add basic stats support Tomasz Duszynski
2017-10-09 15:00         ` [PATCH v4 15/16] maintainers: add maintainers for the mrvl net pmd Tomasz Duszynski
2017-10-09 19:02           ` Ferruh Yigit
2017-10-09 19:09             ` Marcin Wojtas
2017-10-09 19:12               ` Ferruh Yigit
2017-10-10  5:47             ` Tomasz Duszynski
2017-10-10  3:20           ` Jianbo Liu
2017-10-10  4:38             ` Ferruh Yigit
2017-10-09 15:00         ` [PATCH v4 16/16] doc: add mrvl net pmd documentation Tomasz Duszynski
2017-10-09 20:54           ` Ferruh Yigit
2017-10-10  5:51             ` Tomasz Duszynski
2017-10-11 14:27           ` Thomas Monjalon
2017-10-12  2:01             ` Thomas Monjalon
2017-10-09 20:59         ` [PATCH v4 00/16] add net mrvl pmd driver Ferruh Yigit
2017-10-10  0:25           ` Ferruh Yigit
2017-10-10  7:07             ` Tomasz Duszynski
2017-10-10  5:55           ` Tomasz Duszynski
2017-10-12  1:51           ` Ferruh Yigit
2017-10-12  2:37             ` [PATCH] doc: add build steps to mrvl NIC guide Thomas Monjalon
2017-10-12  6:28               ` Tomasz Duszynski
2017-10-12  8:02                 ` Thomas Monjalon
2017-10-12  6:07             ` [PATCH v4 00/16] add net mrvl pmd driver Tomasz Duszynski
2017-09-28 10:22   ` [PATCH v2 2/4] net/mrvl: add mrvl net " Tomasz Duszynski
2017-09-29 15:38     ` Stephen Hemminger
2017-10-02 11:08       ` Bruce Richardson
2017-10-03  6:33         ` Tomasz Duszynski
2017-10-03  6:23       ` Tomasz Duszynski
2017-09-28 10:22   ` [PATCH v2 3/4] doc: add mrvl net pmd documentation Tomasz Duszynski
2017-09-28 10:22   ` [PATCH v2 4/4] maintainers: add maintainers for the mrvl net pmd Tomasz Duszynski
2017-09-28 11:06   ` [PATCH v2 0/4] add net mrvl pmd driver Ferruh Yigit
2017-09-28 11:40     ` Amit Tomer
2017-09-28 12:01       ` Marcin Wojtas
2017-09-28 10:23 ` [PATCH v2 0/4] add crypto " Tomasz Duszynski
2017-09-28 10:23   ` [PATCH v2 1/4] crypto/mrvl: add mrvl crypto " Tomasz Duszynski
2017-10-05 15:01     ` De Lara Guarch, Pablo
2017-10-06  7:24       ` Tomasz Duszynski
2017-10-05 15:47     ` Bruce Richardson
2017-10-06  7:05       ` Tomasz Duszynski
2017-09-28 10:23   ` [PATCH v2 2/4] doc: add mrvl crypto pmd documentation Tomasz Duszynski
2017-10-05 14:45     ` De Lara Guarch, Pablo
2017-10-06  8:06       ` Tomasz Duszynski
2017-09-28 10:23   ` [PATCH v2 3/4] maintainers: add maintainers for the mrvl crypto pmd Tomasz Duszynski
2017-09-28 10:23   ` [PATCH v2 4/4] test: add mrvl crypto pmd unit tests Tomasz Duszynski
2017-10-07 20:28   ` [PATCH v3 0/4] add crypto mrvl pmd driver Tomasz Duszynski
2017-10-07 20:28     ` [PATCH v3 1/4] crypto/mrvl: add mrvl crypto " Tomasz Duszynski
2017-10-10 10:16       ` De Lara Guarch, Pablo
2017-10-10 10:25         ` Tomasz Duszynski
2017-10-07 20:28     ` [PATCH v3 2/4] doc: add mrvl crypto pmd documentation Tomasz Duszynski
2017-10-07 20:28     ` [PATCH v3 3/4] maintainers: add maintainers for the mrvl crypto pmd Tomasz Duszynski
2017-10-07 20:28     ` [PATCH v3 4/4] test: add mrvl crypto pmd unit tests Tomasz Duszynski
2017-10-10 10:44       ` De Lara Guarch, Pablo
2017-10-10 10:57         ` Tomasz Duszynski
2017-10-10 12:17     ` [PATCH v4 0/4] add crypto mrvl pmd driver Tomasz Duszynski
2017-10-10 12:17       ` [PATCH v4 1/4] crypto/mrvl: add mrvl crypto " Tomasz Duszynski
2017-10-10 12:17       ` [PATCH v4 2/4] doc: add mrvl crypto pmd documentation Tomasz Duszynski
2017-10-10 12:17       ` [PATCH v4 3/4] maintainers: add maintainers for the mrvl crypto pmd Tomasz Duszynski
2017-10-10 12:17       ` Tomasz Duszynski [this message]
2017-10-12 12:11       ` [PATCH v4 0/4] add crypto mrvl pmd driver De Lara Guarch, Pablo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1507637842-4417-5-git-send-email-tdu@semihalf.com \
    --to=tdu@semihalf.com \
    --cc=Jianbo.liu@arm.org \
    --cc=dev@dpdk.org \
    --cc=dima@marvell.com \
    --cc=jck@semihalf.com \
    --cc=mw@semihalf.com \
    --cc=nsamsono@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.