All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oscar Mateo <oscar.mateo@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [PATCH] drm/i915: Use a mask when applying WaProgramL3SqcReg1Default
Date: Tue, 17 Oct 2017 13:25:45 -0700	[thread overview]
Message-ID: <1508271945-14961-1-git-send-email-oscar.mateo@intel.com> (raw)

Otherwise we are blasting other bits in GEN8_L3SQCREG1 that might be important
(although we probably aren't at the moment because 0 seems to be the default
for all the other bits).

v2: Extra parentheses (Michel)

Fixes: 050fc46 ("drm/i915:bxt: implement WaProgramL3SqcReg1DefaultForPerf")
Fixes: 450174f ("drm/i915/chv: Tune L3 SQC credits based on actual latencies")
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h        | 1 +
 drivers/gpu/drm/i915/intel_engine_cs.c | 9 ++++++---
 drivers/gpu/drm/i915/intel_pm.c        | 9 ++++++---
 3 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5f99d4d..68a58cc 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -7041,6 +7041,7 @@ enum {
  */
 #define  L3_GENERAL_PRIO_CREDITS(x)		(((x) >> 1) << 19)
 #define  L3_HIGH_PRIO_CREDITS(x)		(((x) >> 1) << 14)
+#define  L3_PRIO_CREDITS_MASK			((0x1f << 19) | (0x1f << 14))
 
 #define GEN7_L3CNTLREG1				_MMIO(0xB01C)
 #define  GEN7_WA_FOR_GEN7_L3_CONTROL			0x3C47FF8C
diff --git a/drivers/gpu/drm/i915/intel_engine_cs.c b/drivers/gpu/drm/i915/intel_engine_cs.c
index 9a4c4ab..a47a9c6 100644
--- a/drivers/gpu/drm/i915/intel_engine_cs.c
+++ b/drivers/gpu/drm/i915/intel_engine_cs.c
@@ -1253,9 +1253,12 @@ static int bxt_init_workarounds(struct intel_engine_cs *engine)
 	}
 
 	/* WaProgramL3SqcReg1DefaultForPerf:bxt */
-	if (IS_BXT_REVID(dev_priv, BXT_REVID_B0, REVID_FOREVER))
-		I915_WRITE(GEN8_L3SQCREG1, L3_GENERAL_PRIO_CREDITS(62) |
-					   L3_HIGH_PRIO_CREDITS(2));
+	if (IS_BXT_REVID(dev_priv, BXT_REVID_B0, REVID_FOREVER)) {
+		u32 val = I915_READ(GEN8_L3SQCREG1);
+		val &= ~L3_PRIO_CREDITS_MASK;
+		val |= L3_GENERAL_PRIO_CREDITS(62) | L3_HIGH_PRIO_CREDITS(2);
+		I915_WRITE(GEN8_L3SQCREG1, val);
+	}
 
 	/* WaToEnableHwFixForPushConstHWBug:bxt */
 	if (IS_BXT_REVID(dev_priv, BXT_REVID_C0, REVID_FOREVER))
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index ac4cf98..d9cb25118 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -8483,15 +8483,18 @@ static void gen8_set_l3sqc_credits(struct drm_i915_private *dev_priv,
 				   int general_prio_credits,
 				   int high_prio_credits)
 {
+	u32 val;
 	u32 misccpctl;
 
 	/* WaTempDisableDOPClkGating:bdw */
 	misccpctl = I915_READ(GEN7_MISCCPCTL);
 	I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
 
-	I915_WRITE(GEN8_L3SQCREG1,
-		   L3_GENERAL_PRIO_CREDITS(general_prio_credits) |
-		   L3_HIGH_PRIO_CREDITS(high_prio_credits));
+	val = I915_READ(GEN8_L3SQCREG1);
+	val &= ~L3_PRIO_CREDITS_MASK;
+	val |= L3_GENERAL_PRIO_CREDITS(general_prio_credits);
+	val |= L3_HIGH_PRIO_CREDITS(high_prio_credits);
+	I915_WRITE(GEN8_L3SQCREG1, val);
 
 	/*
 	 * Wait at least 100 clocks before re-enabling clock gating.
-- 
1.9.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

             reply	other threads:[~2017-10-17 20:25 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-17 20:25 Oscar Mateo [this message]
2017-10-17 21:07 ` ✓ Fi.CI.BAT: success for drm/i915: Use a mask when applying WaProgramL3SqcReg1Default Patchwork
2017-10-18  7:42 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1508271945-14961-1-git-send-email-oscar.mateo@intel.com \
    --to=oscar.mateo@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.