All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
To: bruce.richardson@intel.com, harry.van.haaren@intel.com,
	gage.eads@intel.com, hemant.agrawal@nxp.com, nipun.gupta@nxp.com,
	nikhil.rao@intel.com, santosh.shukla@caviumnetworks.com,
	jerin.jacob@caviumnetworks.com
Cc: dev@dpdk.org, Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Subject: [PATCH 2/8] app/eventdev: modify app setup to support ethdev
Date: Wed, 18 Oct 2017 18:09:02 +0530	[thread overview]
Message-ID: <1508330348-30060-3-git-send-email-pbhagavatula@caviumnetworks.com> (raw)
In-Reply-To: <1508330348-30060-1-git-send-email-pbhagavatula@caviumnetworks.com>

Modify app setup to accommodate event port and queue setup based on the
number of ethernet ports.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
---
 app/test-eventdev/test_perf_atq.c    | 18 ++++++++++++++----
 app/test-eventdev/test_perf_common.c | 27 +++++++++++++++++++++------
 app/test-eventdev/test_perf_common.h |  1 +
 app/test-eventdev/test_perf_queue.c  | 21 ++++++++++++++++-----
 4 files changed, 52 insertions(+), 15 deletions(-)

diff --git a/app/test-eventdev/test_perf_atq.c b/app/test-eventdev/test_perf_atq.c
index 0e9f2db..f6fd5d9 100644
--- a/app/test-eventdev/test_perf_atq.c
+++ b/app/test-eventdev/test_perf_atq.c
@@ -185,10 +185,20 @@ perf_atq_eventdev_setup(struct evt_test *test, struct evt_options *opt)
 {
 	int ret;
 	uint8_t queue;
+	uint8_t  nb_queues;
+	uint8_t nb_ports;
+	RTE_SET_USED(test);
+
+	nb_ports = evt_nr_active_lcores(opt->wlcores);
+	nb_ports += opt->prod_type == EVT_PROD_TYPE_ETH_RX_ADPTR ? 0 :
+		evt_nr_active_lcores(opt->plcores);
+
+	nb_queues = opt->prod_type == EVT_PROD_TYPE_ETH_RX_ADPTR ?
+		rte_eth_dev_count() : atq_nb_event_queues(opt);
 
 	const struct rte_event_dev_config config = {
-			.nb_event_queues = atq_nb_event_queues(opt),
-			.nb_event_ports = perf_nb_event_ports(opt),
+			.nb_event_queues = nb_queues,
+			.nb_event_ports = nb_ports,
 			.nb_events_limit  = 4096,
 			.nb_event_queue_flows = opt->nb_flows,
 			.nb_event_port_dequeue_depth = 128,
@@ -208,7 +218,7 @@ perf_atq_eventdev_setup(struct evt_test *test, struct evt_options *opt)
 			.nb_atomic_order_sequences = opt->nb_flows,
 	};
 	/* queue configurations */
-	for (queue = 0; queue < atq_nb_event_queues(opt); queue++) {
+	for (queue = 0; queue < nb_queues; queue++) {
 		ret = rte_event_queue_setup(opt->dev_id, queue, &q_conf);
 		if (ret) {
 			evt_err("failed to setup queue=%d", queue);
@@ -217,7 +227,7 @@ perf_atq_eventdev_setup(struct evt_test *test, struct evt_options *opt)
 	}
 
 	ret = perf_event_dev_port_setup(test, opt, 1 /* stride */,
-					atq_nb_event_queues(opt));
+					nb_queues);
 	if (ret)
 		return ret;
 
diff --git a/app/test-eventdev/test_perf_common.c b/app/test-eventdev/test_perf_common.c
index 9d2865e..f7961be 100644
--- a/app/test-eventdev/test_perf_common.c
+++ b/app/test-eventdev/test_perf_common.c
@@ -88,6 +88,18 @@ perf_producer(void *arg)
 	return 0;
 }
 
+static int
+perf_producer_wrapper(void *arg)
+{
+	RTE_SET_USED(arg);
+	struct prod_data *p  = arg;
+	struct test_perf *t = p->t;
+	/* Launch the producer function only in case of synthetic producer. */
+	if (t->opt->prod_type == EVT_PROD_TYPE_SYNT)
+		return perf_producer(arg);
+	return 0;
+}
+
 static inline uint64_t
 processed_pkts(struct test_perf *t)
 {
@@ -142,8 +154,8 @@ perf_launch_lcores(struct evt_test *test, struct evt_options *opt,
 		if (!(opt->plcores[lcore_id]))
 			continue;
 
-		ret = rte_eal_remote_launch(perf_producer, &t->prod[port_idx],
-					 lcore_id);
+		ret = rte_eal_remote_launch(perf_producer_wrapper,
+				&t->prod[port_idx], lcore_id);
 		if (ret) {
 			evt_err("failed to launch perf_producer %d", lcore_id);
 			return ret;
@@ -193,14 +205,17 @@ perf_launch_lcores(struct evt_test *test, struct evt_options *opt,
 			fflush(stdout);
 
 			if (remaining <= 0) {
-				t->done = true;
 				t->result = EVT_TEST_SUCCESS;
-				rte_smp_wmb();
-				break;
+				if (opt->prod_type == EVT_PROD_TYPE_SYNT) {
+					t->done = true;
+					rte_smp_wmb();
+					break;
+				}
 			}
 		}
 
-		if (new_cycles - dead_lock_cycles > dead_lock_sample) {
+		if (new_cycles - dead_lock_cycles > dead_lock_sample &&
+				opt->prod_type == EVT_PROD_TYPE_SYNT) {
 			remaining = t->outstand_pkts - processed_pkts(t);
 			if (dead_lock_remaining == remaining) {
 				rte_event_dev_dump(opt->dev_id, stdout);
diff --git a/app/test-eventdev/test_perf_common.h b/app/test-eventdev/test_perf_common.h
index c6fc70c..ab2e599 100644
--- a/app/test-eventdev/test_perf_common.h
+++ b/app/test-eventdev/test_perf_common.h
@@ -38,6 +38,7 @@
 #include <unistd.h>
 
 #include <rte_cycles.h>
+#include <rte_ethdev.h>
 #include <rte_eventdev.h>
 #include <rte_lcore.h>
 #include <rte_malloc.h>
diff --git a/app/test-eventdev/test_perf_queue.c b/app/test-eventdev/test_perf_queue.c
index c0ea894..3467bb5 100644
--- a/app/test-eventdev/test_perf_queue.c
+++ b/app/test-eventdev/test_perf_queue.c
@@ -182,10 +182,21 @@ perf_queue_eventdev_setup(struct evt_test *test, struct evt_options *opt)
 	uint8_t queue;
 	int nb_stages = opt->nb_stages;
 	int ret;
+	int nb_ports;
+	int nb_queues;
+	RTE_SET_USED(test);
+
+	nb_ports = evt_nr_active_lcores(opt->wlcores);
+	nb_ports += opt->prod_type == EVT_PROD_TYPE_ETH_RX_ADPTR ? 0 :
+		evt_nr_active_lcores(opt->plcores);
+
+	nb_queues = opt->prod_type == EVT_PROD_TYPE_ETH_RX_ADPTR ?
+		rte_eth_dev_count() * nb_stages :
+		perf_queue_nb_event_queues(opt);
 
 	const struct rte_event_dev_config config = {
-			.nb_event_queues = perf_queue_nb_event_queues(opt),
-			.nb_event_ports = perf_nb_event_ports(opt),
+			.nb_event_queues = nb_queues,
+			.nb_event_ports = nb_ports,
 			.nb_events_limit  = 4096,
 			.nb_event_queue_flows = opt->nb_flows,
 			.nb_event_port_dequeue_depth = 128,
@@ -204,8 +215,8 @@ perf_queue_eventdev_setup(struct evt_test *test, struct evt_options *opt)
 			.nb_atomic_order_sequences = opt->nb_flows,
 	};
 	/* queue configurations */
-	for (queue = 0; queue < perf_queue_nb_event_queues(opt); queue++) {
-		q_conf.event_queue_cfg =
+	for (queue = 0; queue < nb_queues; queue++) {
+		q_conf.schedule_type =
 			(opt->sched_type_list[queue % nb_stages]);
 
 		if (opt->q_priority) {
@@ -228,7 +239,7 @@ perf_queue_eventdev_setup(struct evt_test *test, struct evt_options *opt)
 	}
 
 	ret = perf_event_dev_port_setup(test, opt, nb_stages /* stride */,
-					perf_queue_nb_event_queues(opt));
+					nb_queues);
 	if (ret)
 		return ret;
 
-- 
2.7.4

  parent reply	other threads:[~2017-10-18 12:40 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-18 12:39 [PATCH 0/8] app/eventdev: add event eth Rx adapter support Pavan Nikhilesh
2017-10-18 12:39 ` [PATCH 1/8] app/eventdev: add ethernet device producer option Pavan Nikhilesh
2017-12-10  8:34   ` Jerin Jacob
2017-10-18 12:39 ` Pavan Nikhilesh [this message]
2017-12-10 11:56   ` [PATCH 2/8] app/eventdev: modify app setup to support ethdev Jerin Jacob
2017-10-18 12:39 ` [PATCH 3/8] app/eventdev: add pktmbuf pool for ethdev Pavan Nikhilesh
2017-12-10 12:01   ` Jerin Jacob
2017-10-18 12:39 ` [PATCH 4/8] app/eventdev: add ethernet device setup helpers Pavan Nikhilesh
2017-12-10 12:09   ` Jerin Jacob
2017-10-18 12:39 ` [PATCH 5/8] app/eventdev: add ethernet device tear down Pavan Nikhilesh
2017-12-10 12:10   ` Jerin Jacob
2017-10-18 12:39 ` [PATCH 6/8] app/eventdev: add event Rx adapter setup Pavan Nikhilesh
2017-12-10 12:13   ` Jerin Jacob
2017-10-18 12:39 ` [PATCH 7/8] app/eventdev: add service core configuration Pavan Nikhilesh
2017-10-18 12:39 ` [PATCH 8/8] doc: update app eventdev options Pavan Nikhilesh
2017-10-18 18:33   ` Mcnamara, John
2017-12-10 12:16   ` Jerin Jacob
2017-12-10  8:28 ` [PATCH 0/8] app/eventdev: add event eth Rx adapter support Jerin Jacob
2017-12-11  7:37   ` Pavan Nikhilesh Bhagavatula
2017-12-11 11:12 ` [PATCH v2 1/8] app/eventdev: add ethernet device producer option Pavan Nikhilesh
2017-12-11 11:12   ` [PATCH v2 2/8] app/eventdev: modify app setup to support ethdev Pavan Nikhilesh
2017-12-11 11:12   ` [PATCH v2 3/8] app/eventdev: add pktmbuf pool for ethdev Pavan Nikhilesh
2017-12-11 11:12   ` [PATCH v2 4/8] app/eventdev: add ethernet device setup helpers Pavan Nikhilesh
2017-12-11 11:12   ` [PATCH v2 5/8] app/eventdev: add ethernet device tear down Pavan Nikhilesh
2017-12-11 11:12   ` [PATCH v2 6/8] app/eventdev: add event Rx adapter setup Pavan Nikhilesh
2017-12-11 11:12   ` [PATCH v2 7/8] app/eventdev: add service core configuration Pavan Nikhilesh
2017-12-11 11:12   ` [PATCH v2 8/8] doc: update app eventdev options Pavan Nikhilesh
2017-12-16  9:34   ` [PATCH v2 1/8] app/eventdev: add ethernet device producer option Jerin Jacob
2017-12-11 15:13 ` [PATCH v3 " Pavan Nikhilesh
2017-12-11 15:13   ` [PATCH v3 2/8] app/eventdev: modify app setup to support ethdev Pavan Nikhilesh
2017-12-11 15:13   ` [PATCH v3 3/8] app/eventdev: add pktmbuf pool for ethdev Pavan Nikhilesh
2017-12-11 15:13   ` [PATCH v3 4/8] app/eventdev: add ethernet device setup helpers Pavan Nikhilesh
2017-12-11 15:13   ` [PATCH v3 5/8] app/eventdev: add ethernet device tear down Pavan Nikhilesh
2017-12-11 15:13   ` [PATCH v3 6/8] app/eventdev: add event Rx adapter setup Pavan Nikhilesh
2017-12-11 15:13   ` [PATCH v3 7/8] app/eventdev: add service core configuration Pavan Nikhilesh
2017-12-19 10:25     ` Van Haaren, Harry
2017-12-11 15:13   ` [PATCH v3 8/8] doc: update app eventdev options Pavan Nikhilesh
2017-12-11 17:34     ` Eads, Gage
2017-12-12  7:19       ` Pavan Nikhilesh Bhagavatula
2017-12-16  9:32       ` Jerin Jacob

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1508330348-30060-3-git-send-email-pbhagavatula@caviumnetworks.com \
    --to=pbhagavatula@caviumnetworks.com \
    --cc=bruce.richardson@intel.com \
    --cc=dev@dpdk.org \
    --cc=gage.eads@intel.com \
    --cc=harry.van.haaren@intel.com \
    --cc=hemant.agrawal@nxp.com \
    --cc=jerin.jacob@caviumnetworks.com \
    --cc=nikhil.rao@intel.com \
    --cc=nipun.gupta@nxp.com \
    --cc=santosh.shukla@caviumnetworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.