All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maya Erez <qca_merez@qca.qualcomm.com>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Lior David <qca_liord@qca.qualcomm.com>,
	linux-wireless@vger.kernel.org, wil6210@qca.qualcomm.com,
	Maya Erez <qca_merez@qca.qualcomm.com>
Subject: [PATCH v2 03/12] wil6210: refresh FW capabilities during interface up
Date: Wed,  1 Nov 2017 21:23:13 +0200	[thread overview]
Message-ID: <1509564202-30078-4-git-send-email-qca_merez@qca.qualcomm.com> (raw)
In-Reply-To: <1509564202-30078-1-git-send-email-qca_merez@qca.qualcomm.com>

From: Lior David <qca_liord@qca.qualcomm.com>

FW capabilities are currently retrieved only during module
initialization, but userspace can replace the firmware while
interface is down, so refresh the FW capabilities when
interface is up (after FW is loaded) to ensure driver
functionality matches the loaded FW.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/fw_inc.c   | 21 ++++++++-------------
 drivers/net/wireless/ath/wil6210/main.c     | 25 +++++++++++++++++++++++--
 drivers/net/wireless/ath/wil6210/pcie_bus.c | 13 +------------
 drivers/net/wireless/ath/wil6210/wil6210.h  |  1 +
 4 files changed, 33 insertions(+), 27 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/fw_inc.c b/drivers/net/wireless/ath/wil6210/fw_inc.c
index e01acac..7a33792 100644
--- a/drivers/net/wireless/ath/wil6210/fw_inc.c
+++ b/drivers/net/wireless/ath/wil6210/fw_inc.c
@@ -124,24 +124,19 @@ static int fw_ignore_section(struct wil6210_priv *wil, const void *data,
 	return 0;
 }
 
-static int fw_handle_comment(struct wil6210_priv *wil, const void *data,
-			     size_t size)
-{
-	wil_hex_dump_fw("", DUMP_PREFIX_OFFSET, 16, 1, data, size, true);
-
-	return 0;
-}
-
 static int
-fw_handle_capabilities(struct wil6210_priv *wil, const void *data,
-		       size_t size)
+fw_handle_comment(struct wil6210_priv *wil, const void *data,
+		  size_t size)
 {
 	const struct wil_fw_record_capabilities *rec = data;
 	size_t capa_size;
 
 	if (size < sizeof(*rec) ||
-	    le32_to_cpu(rec->magic) != WIL_FW_CAPABILITIES_MAGIC)
+	    le32_to_cpu(rec->magic) != WIL_FW_CAPABILITIES_MAGIC) {
+		wil_hex_dump_fw("", DUMP_PREFIX_OFFSET, 16, 1,
+				data, size, true);
 		return 0;
+	}
 
 	capa_size = size - offsetof(struct wil_fw_record_capabilities,
 				    capabilities);
@@ -422,7 +417,7 @@ static int fw_handle_gateway_data4(struct wil6210_priv *wil, const void *data,
 	int (*parse_handler)(struct wil6210_priv *wil, const void *data,
 			     size_t size);
 } wil_fw_handlers[] = {
-	{wil_fw_type_comment, fw_handle_comment, fw_handle_capabilities},
+	{wil_fw_type_comment, fw_handle_comment, fw_handle_comment},
 	{wil_fw_type_data, fw_handle_data, fw_ignore_section},
 	{wil_fw_type_fill, fw_handle_fill, fw_ignore_section},
 	/* wil_fw_type_action */
@@ -517,7 +512,7 @@ int wil_request_firmware(struct wil6210_priv *wil, const char *name,
 
 	rc = request_firmware(&fw, name, wil_to_dev(wil));
 	if (rc) {
-		wil_err_fw(wil, "Failed to load firmware %s\n", name);
+		wil_err_fw(wil, "Failed to load firmware %s rc %d\n", name, rc);
 		return rc;
 	}
 	wil_dbg_fw(wil, "Loading <%s>, %zu bytes\n", name, fw->size);
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 885924a..e92fd35 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -760,6 +760,8 @@ static void wil_collect_fw_info(struct wil6210_priv *wil)
 	u8 retry_short;
 	int rc;
 
+	wil_refresh_fw_capabilities(wil);
+
 	rc = wmi_get_mgmt_retry(wil, &retry_short);
 	if (!rc) {
 		wiphy->retry_short = retry_short;
@@ -767,6 +769,25 @@ static void wil_collect_fw_info(struct wil6210_priv *wil)
 	}
 }
 
+void wil_refresh_fw_capabilities(struct wil6210_priv *wil)
+{
+	struct wiphy *wiphy = wil_to_wiphy(wil);
+
+	wil->keep_radio_on_during_sleep =
+		wil->platform_ops.keep_radio_on_during_sleep &&
+		wil->platform_ops.keep_radio_on_during_sleep(
+			wil->platform_handle) &&
+		test_bit(WMI_FW_CAPABILITY_D3_SUSPEND, wil->fw_capabilities);
+
+	wil_info(wil, "keep_radio_on_during_sleep (%d)\n",
+		 wil->keep_radio_on_during_sleep);
+
+	if (test_bit(WMI_FW_CAPABILITY_RSSI_REPORTING, wil->fw_capabilities))
+		wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+	else
+		wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
+}
+
 void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r)
 {
 	le32_to_cpus(&r->base);
@@ -1071,11 +1092,11 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
 			return rc;
 		}
 
+		wil_collect_fw_info(wil);
+
 		if (wil->ps_profile != WMI_PS_PROFILE_TYPE_DEFAULT)
 			wil_ps_update(wil, wil->ps_profile);
 
-		wil_collect_fw_info(wil);
-
 		if (wil->platform_ops.notify) {
 			rc = wil->platform_ops.notify(wil->platform_handle,
 						      WIL_PLATFORM_EVT_FW_RDY);
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index ba35b32..b4de001 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -85,9 +85,7 @@ void wil_set_capabilities(struct wil6210_priv *wil)
 
 	/* extract FW capabilities from file without loading the FW */
 	wil_request_firmware(wil, wil->wil_fw_name, false);
-
-	if (test_bit(WMI_FW_CAPABILITY_RSSI_REPORTING, wil->fw_capabilities))
-		wil_to_wiphy(wil)->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+	wil_refresh_fw_capabilities(wil);
 }
 
 void wil_disable_irq(struct wil6210_priv *wil)
@@ -297,15 +295,6 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	wil_set_capabilities(wil);
 	wil6210_clear_irq(wil);
 
-	wil->keep_radio_on_during_sleep =
-		wil->platform_ops.keep_radio_on_during_sleep &&
-		wil->platform_ops.keep_radio_on_during_sleep(
-			wil->platform_handle) &&
-		test_bit(WMI_FW_CAPABILITY_D3_SUSPEND, wil->fw_capabilities);
-
-	wil_info(wil, "keep_radio_on_during_sleep (%d)\n",
-		 wil->keep_radio_on_during_sleep);
-
 	/* FW should raise IRQ when ready */
 	rc = wil_if_pcie_enable(wil);
 	if (rc) {
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 90dbdcb..fc8cbb0 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -872,6 +872,7 @@ int wil_ps_update(struct wil6210_priv *wil,
 int __wil_up(struct wil6210_priv *wil);
 int wil_down(struct wil6210_priv *wil);
 int __wil_down(struct wil6210_priv *wil);
+void wil_refresh_fw_capabilities(struct wil6210_priv *wil);
 void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r);
 int wil_find_cid(struct wil6210_priv *wil, const u8 *mac);
 void wil_set_ethtoolops(struct net_device *ndev);
-- 
1.9.1

  parent reply	other threads:[~2017-11-01 19:23 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-01 19:23 [PATCH v2 00/12] wil6210 patches Maya Erez
2017-11-01 19:23 ` [PATCH v2 01/12] wil6210: run-time PM when interface down Maya Erez
2017-11-01 19:23 ` [PATCH v2 02/12] wil6210: print human readable names of WMI commands and events Maya Erez
2017-11-01 19:23 ` Maya Erez [this message]
2017-11-01 19:23 ` [PATCH v2 04/12] wil6210: abort properly in cfg suspend Maya Erez
2017-11-01 19:23 ` [PATCH v2 05/12] wil6210: fix length check in __wmi_send Maya Erez
2017-11-01 19:23 ` [PATCH v2 06/12] wil6210: add block size checks during FW load Maya Erez
2017-11-01 19:23 ` [PATCH v2 07/12] wil6210: missing length check in wmi_set_ie Maya Erez
2017-11-01 19:23 ` [PATCH v2 08/12] wil6210: missing length check in wil_cfg80211_mgmt_tx Maya Erez
2017-11-01 19:23 ` [PATCH v2 09/12] wil6210: get suspend reject reason and resume triggers from FW Maya Erez
2017-11-01 19:23 ` [PATCH v2 10/12] wil6210: fix PCIe bus mastering in case of interface down Maya Erez
2017-11-01 19:23 ` [PATCH v2 11/12] wil6210: remove suspend time statistics Maya Erez
2017-11-01 19:23 ` [PATCH v2 12/12] wil6210: update statistics for suspend Maya Erez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1509564202-30078-4-git-send-email-qca_merez@qca.qualcomm.com \
    --to=qca_merez@qca.qualcomm.com \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=qca_liord@qca.qualcomm.com \
    --cc=wil6210@qca.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.