All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/3] mx6sxsabresd: Load the correct dtb for revA board
Date: Wed, 22 Nov 2017 11:15:27 -0200	[thread overview]
Message-ID: <1511356528-8005-2-git-send-email-festevam@gmail.com> (raw)
In-Reply-To: <1511356528-8005-1-git-send-email-festevam@gmail.com>

From: Fabio Estevam <fabio.estevam@nxp.com>

Currently only imx6sx-sdb.dtb is loaded, but if revA board is used the
correct dtb is imx6sx-sdb-reva.dtb, so make this possible.

While at it, remove an extra 'mmc dev'.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 arch/arm/mach-imx/mx6/Kconfig               |  1 +
 board/freescale/mx6sxsabresd/mx6sxsabresd.c | 16 +++++++++++++++-
 configs/mx6sxsabresd_defconfig              |  1 +
 include/configs/mx6sxsabresd.h              |  8 ++++++--
 4 files changed, 23 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 6f5a92a..52d9984 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -266,6 +266,7 @@ config TARGET_MX6SLLEVK
 
 config TARGET_MX6SXSABRESD
 	bool "mx6sxsabresd"
+	select BOARD_LATE_INIT
 	select MX6SX
 	select SUPPORT_SPL
 	select DM
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 2aeef61..8a918a5 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -540,9 +540,23 @@ int board_init(void)
 	return 0;
 }
 
+static bool is_reva(void)
+{
+	return (nxp_board_rev() == 1);
+}
+
+int board_late_init(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+	if (is_reva())
+		env_set("board_rev", "REVA");
+#endif
+	return 0;
+}
+
 int checkboard(void)
 {
-	puts("Board: MX6SX SABRE SDB\n");
+	printf("Board: MX6SX SABRE SDB rev%s\n", nxp_board_rev_string());
 
 	return 0;
 }
diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig
index c4eb7ca..ac36a18 100644
--- a/configs/mx6sxsabresd_defconfig
+++ b/configs/mx6sxsabresd_defconfig
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_TARGET_MX6SXSABRESD=y
 # CONFIG_CMD_BMODE is not set
+CONFIG_NXP_BOARD_REVISION=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg"
 # CONFIG_CONSOLE_MUX is not set
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 5ef78a7..85b8601 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -43,6 +43,7 @@
 #define UPDATE_M4_ENV ""
 #endif
 
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	UPDATE_M4_ENV \
 	"script=boot.scr\0" \
@@ -104,10 +105,13 @@
 			"fi; " \
 		"else " \
 			"bootz; " \
-		"fi;\0"
+		"fi;\0" \
+	"findfdt="\
+		"if test test $board_rev = REVA ; then " \
+			"setenv fdt_file imx6sx-sdb-reva.dtb; fi; " \
 
 #define CONFIG_BOOTCOMMAND \
-	   "mmc dev ${mmcdev};" \
+	   "run findfdt; " \
 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
 		   "if run loadbootscript; then " \
 			   "run bootscript; " \
-- 
2.7.4

  reply	other threads:[~2017-11-22 13:15 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-22 13:15 [U-Boot] [PATCH 1/3] imx: Add a common way for detecting NXP boards revision Fabio Estevam
2017-11-22 13:15 ` Fabio Estevam [this message]
2017-11-22 14:01   ` [U-Boot] [PATCH 2/3] mx6sxsabresd: Load the correct dtb for revA board Stefano Babic
2017-11-23  9:08   ` Lukasz Majewski
2017-11-22 13:15 ` [U-Boot] [PATCH 3/3] mx6sxsabresd: Use PARTUUID to specify the rootfs location Fabio Estevam
2017-11-22 14:01   ` Stefano Babic
2017-11-23  9:08   ` Lukasz Majewski
2017-11-22 14:00 ` [U-Boot] [PATCH 1/3] imx: Add a common way for detecting NXP boards revision Stefano Babic
2017-11-23  9:08 ` Lukasz Majewski
2017-11-27  9:15 ` Stefano Babic
2017-11-27 10:28   ` Fabio Estevam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1511356528-8005-2-git-send-email-festevam@gmail.com \
    --to=festevam@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.