From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from alexa-out.qualcomm.com ([129.46.98.28]:20536 "EHLO alexa-out.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752425AbdLLTEK (ORCPT ); Tue, 12 Dec 2017 14:04:10 -0500 Cc: Lazar Alexei , linux-wireless@vger.kernel.org, wil6210@qca.qualcomm.com, Maya Erez From: Maya Erez To: Kalle Valo Subject: [PATCH 2/9] wil6210: support 40bit DMA addresses Date: Tue, 12 Dec 2017 21:03:55 +0200 Message-Id: <1513105442-28041-3-git-send-email-qca_merez@qca.qualcomm.com> (sfid-20171212_200415_021313_5AEF6851) In-Reply-To: <1513105442-28041-1-git-send-email-qca_merez@qca.qualcomm.com> References: <1513105442-28041-1-git-send-email-qca_merez@qca.qualcomm.com> Sender: linux-wireless-owner@vger.kernel.org List-ID: From: Lazar Alexei Add the option to support 40bit addresses since some platforms may not support 48bits but support 40bits Signed-off-by: Lazar Alexei Signed-off-by: Maya Erez --- drivers/net/wireless/ath/wil6210/pcie_bus.c | 26 +++++++++++++++----------- drivers/net/wireless/ath/wil6210/pmc.c | 11 ++++++----- drivers/net/wireless/ath/wil6210/txrx.c | 11 ++++++----- drivers/net/wireless/ath/wil6210/wil6210.h | 2 +- 4 files changed, 28 insertions(+), 22 deletions(-) diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c index 42a5480..d4bb0bd 100644 --- a/drivers/net/wireless/ath/wil6210/pcie_bus.c +++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c @@ -206,6 +206,8 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id) .fw_recovery = wil_platform_rop_fw_recovery, }; u32 bar_size = pci_resource_len(pdev, 0); + int dma_addr_size[] = {48, 40, 32}; /* keep descending order */ + int i; /* check HW */ dev_info(&pdev->dev, WIL_NAME @@ -241,21 +243,23 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id) } /* rollback to err_plat */ - /* device supports 48bit addresses */ - rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48)); - if (rc) { - dev_err(dev, "dma_set_mask_and_coherent(48) failed: %d\n", rc); - rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); + /* device supports >32bit addresses */ + for (i = 0; i < ARRAY_SIZE(dma_addr_size); i++) { + rc = dma_set_mask_and_coherent(dev, + DMA_BIT_MASK(dma_addr_size[i])); if (rc) { - dev_err(dev, - "dma_set_mask_and_coherent(32) failed: %d\n", - rc); - goto err_plat; + dev_err(dev, "dma_set_mask_and_coherent(%d) failed: %d\n", + dma_addr_size[i], rc); + continue; } - } else { - wil->use_extended_dma_addr = 1; + dev_info(dev, "using dma mask %d", dma_addr_size[i]); + wil->dma_addr_size = dma_addr_size[i]; + break; } + if (wil->dma_addr_size == 0) + goto err_plat; + rc = pci_enable_device(pdev); if (rc && pdev->msi_enabled == 0) { wil_err(wil, diff --git a/drivers/net/wireless/ath/wil6210/pmc.c b/drivers/net/wireless/ath/wil6210/pmc.c index 2e301b6..4ea27b0 100644 --- a/drivers/net/wireless/ath/wil6210/pmc.c +++ b/drivers/net/wireless/ath/wil6210/pmc.c @@ -111,14 +111,14 @@ void wil_pmc_alloc(struct wil6210_priv *wil, * * HW has limitation that all vrings addresses must share the same * upper 16 msb bits part of 48 bits address. To workaround that, - * if we are using 48 bit addresses switch to 32 bit allocation - * before allocating vring memory. + * if we are using more than 32 bit addresses switch to 32 bit + * allocation before allocating vring memory. * * There's no check for the return value of dma_set_mask_and_coherent, * since we assume if we were able to set the mask during * initialization in this system it will not fail if we set it again */ - if (wil->use_extended_dma_addr) + if (wil->dma_addr_size > 32) dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); pmc->pring_va = dma_alloc_coherent(dev, @@ -126,8 +126,9 @@ void wil_pmc_alloc(struct wil6210_priv *wil, &pmc->pring_pa, GFP_KERNEL); - if (wil->use_extended_dma_addr) - dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48)); + if (wil->dma_addr_size > 32) + dma_set_mask_and_coherent(dev, + DMA_BIT_MASK(wil->dma_addr_size)); wil_dbg_misc(wil, "pmc_alloc: allocated pring %p => %pad. %zd x %d = total %zd bytes\n", diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c index 389c718..62c04f0 100644 --- a/drivers/net/wireless/ath/wil6210/txrx.c +++ b/drivers/net/wireless/ath/wil6210/txrx.c @@ -178,14 +178,14 @@ static int wil_vring_alloc(struct wil6210_priv *wil, struct vring *vring) * * HW has limitation that all vrings addresses must share the same * upper 16 msb bits part of 48 bits address. To workaround that, - * if we are using 48 bit addresses switch to 32 bit allocation - * before allocating vring memory. + * if we are using more than 32 bit addresses switch to 32 bit + * allocation before allocating vring memory. * * There's no check for the return value of dma_set_mask_and_coherent, * since we assume if we were able to set the mask during * initialization in this system it will not fail if we set it again */ - if (wil->use_extended_dma_addr) + if (wil->dma_addr_size > 32) dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32)); vring->va = dma_alloc_coherent(dev, sz, &vring->pa, GFP_KERNEL); @@ -195,8 +195,9 @@ static int wil_vring_alloc(struct wil6210_priv *wil, struct vring *vring) return -ENOMEM; } - if (wil->use_extended_dma_addr) - dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48)); + if (wil->dma_addr_size > 32) + dma_set_mask_and_coherent(dev, + DMA_BIT_MASK(wil->dma_addr_size)); /* initially, all descriptors are SW owned * For Tx and Rx, ownership bit is at the same location, thus diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h index aa85e9c..db68209 100644 --- a/drivers/net/wireless/ath/wil6210/wil6210.h +++ b/drivers/net/wireless/ath/wil6210/wil6210.h @@ -704,7 +704,7 @@ struct wil6210_priv { struct wil_sta_info sta[WIL6210_MAX_CID]; int bcast_vring; u32 vring_idle_trsh; /* HW fetches up to 16 descriptors at once */ - bool use_extended_dma_addr; /* indicates whether we are using 48 bits */ + u32 dma_addr_size; /* indicates dma addr size */ /* scan */ struct cfg80211_scan_request *scan_request; -- 1.9.1