From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dongjiu Geng Subject: [PATCH v14 7/9] ARM: ACPI: Add GPIO notification type for hardware RAS error Date: Thu, 28 Dec 2017 13:54:16 +0800 Message-ID: <1514440458-10515-8-git-send-email-gengdongjiu@huawei.com> References: <1514440458-10515-1-git-send-email-gengdongjiu@huawei.com> Mime-Version: 1.0 Content-Type: text/plain Cc: , , , To: , , , , , , , , , , , , , Return-path: Received: from szxga04-in.huawei.com ([45.249.212.190]:3181 "EHLO huawei.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751345AbdL1F1w (ORCPT ); Thu, 28 Dec 2017 00:27:52 -0500 In-Reply-To: <1514440458-10515-1-git-send-email-gengdongjiu@huawei.com> Sender: kvm-owner@vger.kernel.org List-ID: In ARM platform we implements a notification of error events via a GPIO pin. For this GPIO-signaled events, we choose GPIO pin 4 for hardware error device (PNP0C33), So _E04 should be added to ACPI DSDT table. When GPIO-pin 4 signaled a events, the guest ACPI driver will receive this notification and handing the error. In order to better trigger the GPIO IRQ, we defined a notifier hardware_error_notifiers. If Qemu wants to deliver a GPIO-Signal notification, will call it. Signed-off-by: Dongjiu Geng --- 1. Address discussion result about guest APEI notification type for SIGBUS_MCEERR_AO SIGBUS in [1], the discussion conclusion is using GPIO-Signal [1]: https://lists.gnu.org/archive/html/qemu-devel/2017-10/msg03397.html https://lists.gnu.org/archive/html/qemu-devel/2017-10/msg03467.html https://lists.gnu.org/archive/html/qemu-devel/2017-10/msg03601.html https://lists.gnu.org/archive/html/qemu-devel/2017-10/msg03775.html 2. The ASL dump for the GPIO and hardware error device ................ Device (GPO0) { Name (_AEI, ResourceTemplate () // _AEI: ACPI Event Interrupts { ............. GpioInt (Edge, ActiveHigh, Exclusive, PullUp, 0x0000, "GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x0004 } }) Method (_E04, 0, NotSerialized) // _Exx: Edge-Triggered GPE { Notify (ERRD, 0x80) // Status Change } } Device (ERRD) { Name (_HID, EisaId ("PNP0C33") /* Error Device */) // _HID: Hardware ID Name (_UID, Zero) // _UID: Unique ID Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } 3. Below is the guest log when Qemu notifies guest using GPIO-signal after record a CPER [ 504.164899] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 7 [ 504.166970] {1}[Hardware Error]: event severity: recoverable [ 504.251650] {1}[Hardware Error]: Error 0, type: recoverable [ 504.252974] {1}[Hardware Error]: section_type: memory error [ 504.254380] {1}[Hardware Error]: physical_address: 0x00000000000003ec [ 504.255879] {1}[Hardware Error]: error_type: 3, multi-bit ECC --- hw/arm/virt-acpi-build.c | 31 ++++++++++++++++++++++++++++++- hw/arm/virt.c | 18 ++++++++++++++++++ include/sysemu/sysemu.h | 3 +++ vl.c | 12 ++++++++++++ 4 files changed, 63 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index b7d45cd..06c14b3 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -49,6 +49,7 @@ #define ARM_SPI_BASE 32 #define ACPI_POWER_BUTTON_DEVICE "PWRB" +#define ACPI_HARDWARE_ERROR_DEVICE "ERRD" static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus) { @@ -340,7 +341,13 @@ static void acpi_dsdt_add_gpio(Aml *scope, const MemMapEntry *gpio_memmap, Aml *aei = aml_resource_template(); /* Pin 3 for power button */ - const uint32_t pin_list[1] = {3}; + uint32_t pin_list[1] = {3}; + aml_append(aei, aml_gpio_int(AML_CONSUMER, AML_EDGE, AML_ACTIVE_HIGH, + AML_EXCLUSIVE, AML_PULL_UP, 0, pin_list, 1, + "GPO0", NULL, 0)); + + /* Pin 4 for hardware error device */ + pin_list[0] = 4; aml_append(aei, aml_gpio_int(AML_CONSUMER, AML_EDGE, AML_ACTIVE_HIGH, AML_EXCLUSIVE, AML_PULL_UP, 0, pin_list, 1, "GPO0", NULL, 0)); @@ -351,6 +358,13 @@ static void acpi_dsdt_add_gpio(Aml *scope, const MemMapEntry *gpio_memmap, aml_append(method, aml_notify(aml_name(ACPI_POWER_BUTTON_DEVICE), aml_int(0x80))); aml_append(dev, method); + + /* _E04 is handle for hardware error */ + method = aml_method("_E04", 0, AML_NOTSERIALIZED); + aml_append(method, aml_notify(aml_name(ACPI_HARDWARE_ERROR_DEVICE), + aml_int(0x80))); + aml_append(dev, method); + aml_append(scope, dev); } @@ -363,6 +377,20 @@ static void acpi_dsdt_add_power_button(Aml *scope) aml_append(scope, dev); } +static void acpi_dsdt_add_error_device(Aml *scope) +{ + Aml *dev = aml_device(ACPI_HARDWARE_ERROR_DEVICE); + Aml *method; + + aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0C33"))); + aml_append(dev, aml_name_decl("_UID", aml_int(0))); + + method = aml_method("_STA", 0, AML_NOTSERIALIZED); + aml_append(method, aml_return(aml_int(0x0f))); + aml_append(dev, method); + aml_append(scope, dev); +} + /* RSDP */ static GArray * build_rsdp(GArray *rsdp_table, BIOSLinker *linker, unsigned xsdt_tbl_offset) @@ -716,6 +744,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) acpi_dsdt_add_gpio(scope, &memmap[VIRT_GPIO], (irqmap[VIRT_GPIO] + ARM_SPI_BASE)); acpi_dsdt_add_power_button(scope); + acpi_dsdt_add_error_device(scope); aml_append(dsdt, scope); diff --git a/hw/arm/virt.c b/hw/arm/virt.c index 6b7a0fe..68495c2 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -701,16 +701,27 @@ static void create_rtc(const VirtMachineState *vms, qemu_irq *pic) } static DeviceState *gpio_key_dev; +static DeviceState *gpio_err_dev; static void virt_powerdown_req(Notifier *n, void *opaque) { /* use gpio Pin 3 for power button event */ qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1); } +static void virt_error_notify_req(Notifier *n, void *opaque) +{ + /* use gpio Pin 4 for hardware error event */ + qemu_set_irq(qdev_get_gpio_in(gpio_err_dev, 0), 1); +} + static Notifier virt_system_powerdown_notifier = { .notify = virt_powerdown_req }; +static Notifier virt_hardware_error_notifier = { + .notify = virt_error_notify_req +}; + static void create_gpio(const VirtMachineState *vms, qemu_irq *pic) { char *nodename; @@ -739,6 +750,10 @@ static void create_gpio(const VirtMachineState *vms, qemu_irq *pic) gpio_key_dev = sysbus_create_simple("gpio-key", -1, qdev_get_gpio_in(pl061_dev, 3)); + + gpio_err_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 4)); + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); @@ -755,6 +770,9 @@ static void create_gpio(const VirtMachineState *vms, qemu_irq *pic) /* connect powerdown request */ qemu_register_powerdown_notifier(&virt_system_powerdown_notifier); + /* connect hardware error notify request */ + qemu_register_hardware_error_notifier(&virt_hardware_error_notifier); + g_free(nodename); } diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h index b213696..86931cf 100644 --- a/include/sysemu/sysemu.h +++ b/include/sysemu/sysemu.h @@ -75,6 +75,7 @@ void qemu_register_wakeup_notifier(Notifier *notifier); void qemu_system_shutdown_request(ShutdownCause reason); void qemu_system_powerdown_request(void); void qemu_register_powerdown_notifier(Notifier *notifier); +void qemu_register_hardware_error_notifier(Notifier *notifier); void qemu_system_debug_request(void); void qemu_system_vmstop_request(RunState reason); void qemu_system_vmstop_request_prepare(void); @@ -93,6 +94,8 @@ void qemu_remove_machine_init_done_notifier(Notifier *notify); void qemu_announce_self(void); +void qemu_hardware_error_notify(void); + extern int autostart; typedef enum { diff --git a/vl.c b/vl.c index d632693..3552f7d 100644 --- a/vl.c +++ b/vl.c @@ -1614,6 +1614,8 @@ static int suspend_requested; static WakeupReason wakeup_reason; static NotifierList powerdown_notifiers = NOTIFIER_LIST_INITIALIZER(powerdown_notifiers); +static NotifierList hardware_error_notifiers = + NOTIFIER_LIST_INITIALIZER(hardware_error_notifiers); static NotifierList suspend_notifiers = NOTIFIER_LIST_INITIALIZER(suspend_notifiers); static NotifierList wakeup_notifiers = @@ -1850,12 +1852,22 @@ void qemu_register_powerdown_notifier(Notifier *notifier) notifier_list_add(&powerdown_notifiers, notifier); } +void qemu_register_hardware_error_notifier(Notifier *notifier) +{ + notifier_list_add(&hardware_error_notifiers, notifier); +} + void qemu_system_debug_request(void) { debug_requested = 1; qemu_notify_event(); } +void qemu_hardware_error_notify(void) +{ + notifier_list_notify(&hardware_error_notifiers, NULL); +} + static bool main_loop_should_exit(void) { RunState r; -- 1.8.3.1 From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from eggs.gnu.org ([2001:4830:134:3::10]:42540) by lists.gnu.org with esmtp (Exim 4.71) (envelope-from ) id 1eUQjd-0004pm-67 for qemu-devel@nongnu.org; Thu, 28 Dec 2017 00:28:07 -0500 Received: from Debian-exim by eggs.gnu.org with spam-scanned (Exim 4.71) (envelope-from ) id 1eUQja-0000Rj-Tk for qemu-devel@nongnu.org; Thu, 28 Dec 2017 00:28:05 -0500 From: Dongjiu Geng Date: Thu, 28 Dec 2017 13:54:16 +0800 Message-ID: <1514440458-10515-8-git-send-email-gengdongjiu@huawei.com> In-Reply-To: <1514440458-10515-1-git-send-email-gengdongjiu@huawei.com> References: <1514440458-10515-1-git-send-email-gengdongjiu@huawei.com> MIME-Version: 1.0 Content-Type: text/plain Subject: [Qemu-devel] [PATCH v14 7/9] ARM: ACPI: Add GPIO notification type for hardware RAS error List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: pbonzini@redhat.com, mst@redhat.com, imammedo@redhat.com, zhaoshenglong@huawei.com, peter.maydell@linaro.org, mtosatti@redhat.com, rth@twiddle.net, ehabkost@redhat.com, james.morse@arm.com, christoffer.dall@linaro.org, marc.zyngier@arm.com, kvm@vger.kernel.org, qemu-devel@nongnu.org, qemu-arm@nongnu.org Cc: gengdongjiu@huawei.com, huangshaoyu@huawei.com, zhengqiang10@huawei.com, xuwei5@hisilicon.com In ARM platform we implements a notification of error events via a GPIO pin. For this GPIO-signaled events, we choose GPIO pin 4 for hardware error device (PNP0C33), So _E04 should be added to ACPI DSDT table. When GPIO-pin 4 signaled a events, the guest ACPI driver will receive this notification and handing the error. In order to better trigger the GPIO IRQ, we defined a notifier hardware_error_notifiers. If Qemu wants to deliver a GPIO-Signal notification, will call it. Signed-off-by: Dongjiu Geng --- 1. Address discussion result about guest APEI notification type for SIGBUS_MCEERR_AO SIGBUS in [1], the discussion conclusion is using GPIO-Signal [1]: https://lists.gnu.org/archive/html/qemu-devel/2017-10/msg03397.html https://lists.gnu.org/archive/html/qemu-devel/2017-10/msg03467.html https://lists.gnu.org/archive/html/qemu-devel/2017-10/msg03601.html https://lists.gnu.org/archive/html/qemu-devel/2017-10/msg03775.html 2. The ASL dump for the GPIO and hardware error device ................ Device (GPO0) { Name (_AEI, ResourceTemplate () // _AEI: ACPI Event Interrupts { ............. GpioInt (Edge, ActiveHigh, Exclusive, PullUp, 0x0000, "GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x0004 } }) Method (_E04, 0, NotSerialized) // _Exx: Edge-Triggered GPE { Notify (ERRD, 0x80) // Status Change } } Device (ERRD) { Name (_HID, EisaId ("PNP0C33") /* Error Device */) // _HID: Hardware ID Name (_UID, Zero) // _UID: Unique ID Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } 3. Below is the guest log when Qemu notifies guest using GPIO-signal after record a CPER [ 504.164899] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 7 [ 504.166970] {1}[Hardware Error]: event severity: recoverable [ 504.251650] {1}[Hardware Error]: Error 0, type: recoverable [ 504.252974] {1}[Hardware Error]: section_type: memory error [ 504.254380] {1}[Hardware Error]: physical_address: 0x00000000000003ec [ 504.255879] {1}[Hardware Error]: error_type: 3, multi-bit ECC --- hw/arm/virt-acpi-build.c | 31 ++++++++++++++++++++++++++++++- hw/arm/virt.c | 18 ++++++++++++++++++ include/sysemu/sysemu.h | 3 +++ vl.c | 12 ++++++++++++ 4 files changed, 63 insertions(+), 1 deletion(-) diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index b7d45cd..06c14b3 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -49,6 +49,7 @@ #define ARM_SPI_BASE 32 #define ACPI_POWER_BUTTON_DEVICE "PWRB" +#define ACPI_HARDWARE_ERROR_DEVICE "ERRD" static void acpi_dsdt_add_cpus(Aml *scope, int smp_cpus) { @@ -340,7 +341,13 @@ static void acpi_dsdt_add_gpio(Aml *scope, const MemMapEntry *gpio_memmap, Aml *aei = aml_resource_template(); /* Pin 3 for power button */ - const uint32_t pin_list[1] = {3}; + uint32_t pin_list[1] = {3}; + aml_append(aei, aml_gpio_int(AML_CONSUMER, AML_EDGE, AML_ACTIVE_HIGH, + AML_EXCLUSIVE, AML_PULL_UP, 0, pin_list, 1, + "GPO0", NULL, 0)); + + /* Pin 4 for hardware error device */ + pin_list[0] = 4; aml_append(aei, aml_gpio_int(AML_CONSUMER, AML_EDGE, AML_ACTIVE_HIGH, AML_EXCLUSIVE, AML_PULL_UP, 0, pin_list, 1, "GPO0", NULL, 0)); @@ -351,6 +358,13 @@ static void acpi_dsdt_add_gpio(Aml *scope, const MemMapEntry *gpio_memmap, aml_append(method, aml_notify(aml_name(ACPI_POWER_BUTTON_DEVICE), aml_int(0x80))); aml_append(dev, method); + + /* _E04 is handle for hardware error */ + method = aml_method("_E04", 0, AML_NOTSERIALIZED); + aml_append(method, aml_notify(aml_name(ACPI_HARDWARE_ERROR_DEVICE), + aml_int(0x80))); + aml_append(dev, method); + aml_append(scope, dev); } @@ -363,6 +377,20 @@ static void acpi_dsdt_add_power_button(Aml *scope) aml_append(scope, dev); } +static void acpi_dsdt_add_error_device(Aml *scope) +{ + Aml *dev = aml_device(ACPI_HARDWARE_ERROR_DEVICE); + Aml *method; + + aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0C33"))); + aml_append(dev, aml_name_decl("_UID", aml_int(0))); + + method = aml_method("_STA", 0, AML_NOTSERIALIZED); + aml_append(method, aml_return(aml_int(0x0f))); + aml_append(dev, method); + aml_append(scope, dev); +} + /* RSDP */ static GArray * build_rsdp(GArray *rsdp_table, BIOSLinker *linker, unsigned xsdt_tbl_offset) @@ -716,6 +744,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) acpi_dsdt_add_gpio(scope, &memmap[VIRT_GPIO], (irqmap[VIRT_GPIO] + ARM_SPI_BASE)); acpi_dsdt_add_power_button(scope); + acpi_dsdt_add_error_device(scope); aml_append(dsdt, scope); diff --git a/hw/arm/virt.c b/hw/arm/virt.c index 6b7a0fe..68495c2 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -701,16 +701,27 @@ static void create_rtc(const VirtMachineState *vms, qemu_irq *pic) } static DeviceState *gpio_key_dev; +static DeviceState *gpio_err_dev; static void virt_powerdown_req(Notifier *n, void *opaque) { /* use gpio Pin 3 for power button event */ qemu_set_irq(qdev_get_gpio_in(gpio_key_dev, 0), 1); } +static void virt_error_notify_req(Notifier *n, void *opaque) +{ + /* use gpio Pin 4 for hardware error event */ + qemu_set_irq(qdev_get_gpio_in(gpio_err_dev, 0), 1); +} + static Notifier virt_system_powerdown_notifier = { .notify = virt_powerdown_req }; +static Notifier virt_hardware_error_notifier = { + .notify = virt_error_notify_req +}; + static void create_gpio(const VirtMachineState *vms, qemu_irq *pic) { char *nodename; @@ -739,6 +750,10 @@ static void create_gpio(const VirtMachineState *vms, qemu_irq *pic) gpio_key_dev = sysbus_create_simple("gpio-key", -1, qdev_get_gpio_in(pl061_dev, 3)); + + gpio_err_dev = sysbus_create_simple("gpio-key", -1, + qdev_get_gpio_in(pl061_dev, 4)); + qemu_fdt_add_subnode(vms->fdt, "/gpio-keys"); qemu_fdt_setprop_string(vms->fdt, "/gpio-keys", "compatible", "gpio-keys"); qemu_fdt_setprop_cell(vms->fdt, "/gpio-keys", "#size-cells", 0); @@ -755,6 +770,9 @@ static void create_gpio(const VirtMachineState *vms, qemu_irq *pic) /* connect powerdown request */ qemu_register_powerdown_notifier(&virt_system_powerdown_notifier); + /* connect hardware error notify request */ + qemu_register_hardware_error_notifier(&virt_hardware_error_notifier); + g_free(nodename); } diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h index b213696..86931cf 100644 --- a/include/sysemu/sysemu.h +++ b/include/sysemu/sysemu.h @@ -75,6 +75,7 @@ void qemu_register_wakeup_notifier(Notifier *notifier); void qemu_system_shutdown_request(ShutdownCause reason); void qemu_system_powerdown_request(void); void qemu_register_powerdown_notifier(Notifier *notifier); +void qemu_register_hardware_error_notifier(Notifier *notifier); void qemu_system_debug_request(void); void qemu_system_vmstop_request(RunState reason); void qemu_system_vmstop_request_prepare(void); @@ -93,6 +94,8 @@ void qemu_remove_machine_init_done_notifier(Notifier *notify); void qemu_announce_self(void); +void qemu_hardware_error_notify(void); + extern int autostart; typedef enum { diff --git a/vl.c b/vl.c index d632693..3552f7d 100644 --- a/vl.c +++ b/vl.c @@ -1614,6 +1614,8 @@ static int suspend_requested; static WakeupReason wakeup_reason; static NotifierList powerdown_notifiers = NOTIFIER_LIST_INITIALIZER(powerdown_notifiers); +static NotifierList hardware_error_notifiers = + NOTIFIER_LIST_INITIALIZER(hardware_error_notifiers); static NotifierList suspend_notifiers = NOTIFIER_LIST_INITIALIZER(suspend_notifiers); static NotifierList wakeup_notifiers = @@ -1850,12 +1852,22 @@ void qemu_register_powerdown_notifier(Notifier *notifier) notifier_list_add(&powerdown_notifiers, notifier); } +void qemu_register_hardware_error_notifier(Notifier *notifier) +{ + notifier_list_add(&hardware_error_notifiers, notifier); +} + void qemu_system_debug_request(void) { debug_requested = 1; qemu_notify_event(); } +void qemu_hardware_error_notify(void) +{ + notifier_list_notify(&hardware_error_notifiers, NULL); +} + static bool main_loop_should_exit(void) { RunState r; -- 1.8.3.1