From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Guo Subject: [PATCH V9 3/5] app/testpmd: use uevent to monitor hotplug Date: Wed, 10 Jan 2018 17:12:22 +0800 Message-ID: <1515575544-2141-4-git-send-email-jia.guo@intel.com> References: <1515555037-9419-4-git-send-email-jia.guo@intel.com> <1515575544-2141-1-git-send-email-jia.guo@intel.com> Cc: konstantin.ananyev@intel.com, jblunck@infradead.org, shreyansh.jain@nxp.com, jingjing.wu@intel.com, dev@dpdk.org, jia.guo@intel.com, thomas@monjalon.net, helin.zhang@intel.com, motih@mellanox.com To: stephen@networkplumber.org, bruce.richardson@intel.com, ferruh.yigit@intel.com, gaetan.rivet@6wind.com Return-path: Received: from mga11.intel.com (mga11.intel.com [192.55.52.93]) by dpdk.org (Postfix) with ESMTP id 245D31B1B3 for ; Wed, 10 Jan 2018 10:13:39 +0100 (CET) In-Reply-To: <1515575544-2141-1-git-send-email-jia.guo@intel.com> List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" use testpmd for example, to show app how to request and use uevent monitoring to handle the hot removal event and the hot insertion event. Signed-off-by: Jeff Guo --- v9->v8: split the patch set into small and explicit patch --- app/test-pmd/testpmd.c | 179 +++++++++++++++++++++++++++++++++++++++++++++++++ app/test-pmd/testpmd.h | 9 +++ 2 files changed, 188 insertions(+) diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index 9414d0e..37c859a 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -373,6 +373,8 @@ uint8_t bitrate_enabled; struct gro_status gro_ports[RTE_MAX_ETHPORTS]; uint8_t gro_flush_cycles = GRO_DEFAULT_FLUSH_CYCLES; +static struct hotplug_request_list hp_list; + /* Forward function declarations */ static void map_port_queue_stats_mapping_registers(portid_t pi, struct rte_port *port); @@ -380,6 +382,13 @@ static void check_all_ports_link_status(uint32_t port_mask); static int eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param, void *ret_param); +static int eth_uevent_callback(enum rte_dev_event_type type, + void *param, void *ret_param); +static int eth_uevent_callback_register(portid_t pid); +static int in_hotplug_list(const char *dev_name); + +static int hotplug_list_add(const char *dev_name, + enum rte_dev_event_type event); /* * Check if all the ports are started. @@ -1729,6 +1738,32 @@ reset_port(portid_t pid) printf("Done\n"); } +static int +eth_uevent_callback_register(portid_t pid) +{ + int diag; + struct rte_eth_dev *dev; + enum rte_dev_event_type dev_event_type; + + /* register the uevent callback */ + dev = &rte_eth_devices[pid]; + for (dev_event_type = RTE_DEV_EVENT_ADD; + dev_event_type < RTE_DEV_EVENT_CHANGE; + dev_event_type++) { + diag = rte_dev_callback_register(dev->device, dev_event_type, + eth_uevent_callback, + (void *)(intptr_t)pid); + if (diag) { + printf("Failed to setup uevent callback for" + " device event %d\n", + dev_event_type); + return -1; + } + } + + return 0; +} + void attach_port(char *identifier) { @@ -1745,6 +1780,8 @@ attach_port(char *identifier) if (rte_eth_dev_attach(identifier, &pi)) return; + eth_uevent_callback_register(pi); + socket_id = (unsigned)rte_eth_dev_socket_id(pi); /* if socket_id is invalid, set to 0 */ if (check_socket_id(socket_id) < 0) @@ -1756,6 +1793,8 @@ attach_port(char *identifier) ports[pi].port_status = RTE_PORT_STOPPED; + hotplug_list_add(identifier, RTE_DEV_EVENT_REMOVE); + printf("Port %d is attached. Now total ports is %d\n", pi, nb_ports); printf("Done\n"); } @@ -1782,6 +1821,9 @@ detach_port(portid_t port_id) nb_ports = rte_eth_dev_count(); + hotplug_list_add(rte_eth_devices[port_id].device->name, + RTE_DEV_EVENT_ADD); + printf("Port '%s' is detached. Now total ports is %d\n", name, nb_ports); printf("Done\n"); @@ -1805,6 +1847,9 @@ pmd_test_exit(void) close_port(pt_id); } } + + rte_dev_monitor_stop(); + printf("\nBye...\n"); } @@ -1889,6 +1934,49 @@ rmv_event_callback(void *arg) dev->device->name); } +static void +rmv_uevent_callback(void *arg) +{ + char name[RTE_ETH_NAME_MAX_LEN]; + uint8_t port_id = (intptr_t)arg; + + rte_eal_alarm_cancel(rmv_uevent_callback, arg); + + RTE_ETH_VALID_PORTID_OR_RET(port_id); + printf("removing port id:%u\n", port_id); + + if (!in_hotplug_list(rte_eth_devices[port_id].device->name)) + return; + + stop_packet_forwarding(); + + stop_port(port_id); + close_port(port_id); + if (rte_eth_dev_detach(port_id, name)) { + RTE_LOG(ERR, USER1, "Failed to detach port '%s'\n", name); + return; + } + + nb_ports = rte_eth_dev_count(); + + printf("Port '%s' is detached. Now total ports is %d\n", + name, nb_ports); +} + +static void +add_uevent_callback(void *arg) +{ + char *dev_name = (char *)arg; + + rte_eal_alarm_cancel(add_uevent_callback, arg); + + if (!in_hotplug_list(dev_name)) + return; + + RTE_LOG(ERR, EAL, "add device: %s\n", dev_name); + attach_port(dev_name); +} + /* This function is used by the interrupt thread */ static int eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param, @@ -1931,6 +2019,88 @@ eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param, } static int +in_hotplug_list(const char *dev_name) +{ + struct hotplug_request *hp_request = NULL; + + TAILQ_FOREACH(hp_request, &hp_list, next) { + if (!strcmp(hp_request->dev_name, dev_name)) + break; + } + + if (hp_request) + return 1; + + return 0; +} + +static int +hotplug_list_add(const char *dev_name, enum rte_dev_event_type event) +{ + struct hotplug_request *hp_request; + + hp_request = rte_zmalloc("hoplug request", + sizeof(*hp_request), 0); + if (hp_request == NULL) { + fprintf(stderr, "%s can not alloc memory\n", + __func__); + return -ENOMEM; + } + + hp_request->dev_name = dev_name; + hp_request->event = event; + + TAILQ_INSERT_TAIL(&hp_list, hp_request, next); + + return 0; +} + +/* This function is used by the interrupt thread */ +static int +eth_uevent_callback(enum rte_dev_event_type type, void *arg, + void *ret_param) +{ + static const char * const event_desc[] = { + [RTE_DEV_EVENT_UNKNOWN] = "Unknown", + [RTE_DEV_EVENT_ADD] = "add", + [RTE_DEV_EVENT_REMOVE] = "remove", + }; + static char *device_name; + + RTE_SET_USED(ret_param); + + if (type >= RTE_DEV_EVENT_MAX) { + fprintf(stderr, "%s called upon invalid event %d\n", + __func__, type); + fflush(stderr); + } else if (event_print_mask & (UINT32_C(1) << type)) { + printf("%s event\n", + event_desc[type]); + fflush(stdout); + } + + switch (type) { + case RTE_DEV_EVENT_REMOVE: + if (rte_eal_alarm_set(100000, + rmv_uevent_callback, arg)) + fprintf(stderr, "Could not set up deferred " + "device removal\n"); + break; + case RTE_DEV_EVENT_ADD: + device_name = malloc(strlen((const char *)ret_param) + 1); + strcpy(device_name, ret_param); + if (rte_eal_alarm_set(500000, + add_uevent_callback, device_name)) + fprintf(stderr, "Could not set up deferred " + "device add\n"); + break; + default: + break; + } + return 0; +} + +static int set_tx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port) { uint16_t i; @@ -2415,6 +2585,15 @@ main(int argc, char** argv) nb_rxq, nb_txq); init_config(); + + /* enable hot plug monitoring */ + TAILQ_INIT(&hp_list); + rte_dev_monitor_start(); + RTE_ETH_FOREACH_DEV(port_id) { + hotplug_list_add(rte_eth_devices[port_id].device->name, + RTE_DEV_EVENT_REMOVE); + eth_uevent_callback_register(port_id); + } if (start_port(RTE_PORT_ALL) != 0) rte_exit(EXIT_FAILURE, "Start ports failed\n"); diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index 2a266fd..64254e6 100644 --- a/app/test-pmd/testpmd.h +++ b/app/test-pmd/testpmd.h @@ -63,6 +63,15 @@ typedef uint16_t streamid_t; #define TM_MODE 0 #endif +struct hotplug_request { + TAILQ_ENTRY(hotplug_request) next; /**< Callbacks list */ + const char *dev_name; /* request device name */ + enum rte_dev_event_type event; /**< device event type */ +}; + +/** @internal Structure to keep track of registered callbacks */ +TAILQ_HEAD(hotplug_request_list, hotplug_request); + enum { PORT_TOPOLOGY_PAIRED, PORT_TOPOLOGY_CHAINED, -- 2.7.4