All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicolin Chen <nicoleotsuka@gmail.com>
To: timur@tabi.org, broonie@kernel.org, mail@maciej.szmigiero.name
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	alsa-devel@alsa-project.org, lgirdwood@gmail.com,
	fabio.estevam@nxp.com, caleb@crome.org,
	arnaud.mouiche@invoxia.com, lukma@denx.de, kernel@pengutronix.de
Subject: [PATCH v3 16/17] ASoC: fsl_ssi: Move DT related code to a separate probe()
Date: Sun, 14 Jan 2018 20:21:26 -0800	[thread overview]
Message-ID: <1515990087-11598-17-git-send-email-nicoleotsuka@gmail.com> (raw)
In-Reply-To: <1515990087-11598-1-git-send-email-nicoleotsuka@gmail.com>

This patch cleans up probe() function by moving all Device Tree
related code into a separate function. It allows the probe() to
be Device Tree independent. This will be very useful for future
integration of imx-ssi driver which has similar functionalities
while exists only because it supports non-DT cases.

This patch also moves symmetric_channels of AC97 from the probe
to the structure snd_soc_dai_driver for simplification.

Additionally, since PowerPC and AC97 use the same pdev pointer
to register a platform device, this patch also unifies related
code.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Tested-by: Caleb Crome <caleb@crome.org>
---
 sound/soc/fsl/fsl_ssi.c | 202 +++++++++++++++++++++++++-----------------------
 1 file changed, 107 insertions(+), 95 deletions(-)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 20889d8..d2072de 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -239,8 +239,12 @@ struct fsl_ssi_soc_data {
  *
  * @fiq_params: FIQ stream filtering parameters
  *
- * @pdev: Pointer to pdev when using fsl-ssi as sound card (ppc only)
- *        TODO: Should be replaced with simple-sound-card
+ * @card_pdev: Platform_device pointer when using fsl-ssi as sound card
+ *             (PowerPC or AC97 only)
+ * @card_name: Platform_device name when using fsl-ssi as sound card
+ *             (PowerPC or AC97 only)
+ * @card_idx: The index of SSI when registering a sound card
+ *             (PowerPC or AC97 only)
  *
  * @dbg_stats: Debugging statistics
  *
@@ -285,7 +289,9 @@ struct fsl_ssi {
 
 	struct imx_pcm_fiq_params fiq_params;
 
-	struct platform_device *pdev;
+	struct platform_device *card_pdev;
+	char card_name[32];
+	u32 card_idx;
 
 	struct fsl_ssi_dbg dbg_stats;
 
@@ -1131,6 +1137,7 @@ static const struct snd_soc_component_driver fsl_ssi_component = {
 
 static struct snd_soc_dai_driver fsl_ssi_ac97_dai = {
 	.bus_control = true,
+	.symmetric_channels = 1,
 	.probe = fsl_ssi_dai_probe,
 	.playback = {
 		.stream_name = "AC97 Playback",
@@ -1282,9 +1289,7 @@ static void make_lowercase(char *s)
 static int fsl_ssi_imx_probe(struct platform_device *pdev,
 			     struct fsl_ssi *ssi, void __iomem *iomem)
 {
-	struct device_node *np = pdev->dev.of_node;
 	struct device *dev = &pdev->dev;
-	u32 dmas[4];
 	int ret;
 
 	/* Backward compatible for a DT without ipg clock name assigned */
@@ -1318,14 +1323,8 @@ static int fsl_ssi_imx_probe(struct platform_device *pdev,
 	ssi->dma_params_tx.addr = ssi->ssi_phys + REG_SSI_STX0;
 	ssi->dma_params_rx.addr = ssi->ssi_phys + REG_SSI_SRX0;
 
-	/* Set to dual FIFO mode according to the SDMA sciprt */
-	ret = of_property_read_u32_array(np, "dmas", dmas, 4);
-	if (ssi->use_dma && !ret && dmas[2] == IMX_DMATYPE_SSI_DUAL) {
-		ssi->use_dual_fifo = true;
-		/*
-		 * Use even numbers to avoid channel swap due to SDMA
-		 * script design
-		 */
+	/* Use even numbers to avoid channel swap due to SDMA script design */
+	if (ssi->use_dual_fifo) {
 		ssi->dma_params_tx.maxburst &= ~0x1;
 		ssi->dma_params_rx.maxburst &= ~0x1;
 	}
@@ -1366,41 +1365,102 @@ static void fsl_ssi_imx_clean(struct platform_device *pdev, struct fsl_ssi *ssi)
 		clk_disable_unprepare(ssi->clk);
 }
 
-static int fsl_ssi_probe(struct platform_device *pdev)
+static int fsl_ssi_probe_from_dt(struct fsl_ssi *ssi)
 {
-	struct fsl_ssi *ssi;
-	int ret = 0;
-	struct device_node *np = pdev->dev.of_node;
-	struct device *dev = &pdev->dev;
+	struct device *dev = ssi->dev;
+	struct device_node *np = dev->of_node;
 	const struct of_device_id *of_id;
 	const char *p, *sprop;
 	const uint32_t *iprop;
-	struct resource *res;
-	void __iomem *iomem;
-	char name[64];
-	struct regmap_config regconfig = fsl_ssi_regconfig;
+	u32 dmas[4];
+	int ret;
 
 	of_id = of_match_device(fsl_ssi_ids, dev);
 	if (!of_id || !of_id->data)
 		return -EINVAL;
 
-	ssi = devm_kzalloc(dev, sizeof(*ssi), GFP_KERNEL);
-	if (!ssi)
-		return -ENOMEM;
-
 	ssi->soc = of_id->data;
-	ssi->dev = dev;
+
+	ret = of_property_match_string(np, "clock-names", "ipg");
+	/* Get error code if not found */
+	ssi->has_ipg_clk_name = ret >= 0;
 
 	/* Check if being used in AC97 mode */
 	sprop = of_get_property(np, "fsl,mode", NULL);
-	if (sprop) {
-		if (!strcmp(sprop, "ac97-slave"))
-			ssi->dai_fmt = FSLSSI_AC97_DAIFMT;
+	if (sprop && !strcmp(sprop, "ac97-slave")) {
+		ssi->dai_fmt = FSLSSI_AC97_DAIFMT;
+
+		ret = of_property_read_u32(np, "cell-index", &ssi->card_idx);
+		if (ret) {
+			dev_err(dev, "failed to get SSI index property\n");
+			return -EINVAL;
+		}
+		strcpy(ssi->card_name, "ac97-codec");
 	}
 
 	/* Select DMA or FIQ */
 	ssi->use_dma = !of_property_read_bool(np, "fsl,fiq-stream-filter");
 
+	/* In synchronous mode, STCK and STFS ports are used by RX as well */
+	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL))
+		ssi->synchronous = true;
+
+	/* Fetch FIFO depth; Set to 8 for older DT without this property */
+	iprop = of_get_property(np, "fsl,fifo-depth", NULL);
+	if (iprop)
+		ssi->fifo_depth = be32_to_cpup(iprop);
+	else
+		ssi->fifo_depth = 8;
+
+	/* Use dual FIFO mode depending on the support from SDMA script */
+	ret = of_property_read_u32_array(np, "dmas", dmas, 4);
+	if (ssi->use_dma && !ret && dmas[2] == IMX_DMATYPE_SSI_DUAL)
+		ssi->use_dual_fifo = true;
+
+	/*
+	 * Backward compatible for older bindings by manually triggering the
+	 * machine driver's probe(). Use /compatible property, including the
+	 * address of CPU DAI driver structure, as the name of machine driver
+	 *
+	 * If card_name is set by AC97 earlier, bypass here since it uses a
+	 * different name to register the device.
+	 */
+	if (!ssi->card_name[0] && of_get_property(np, "codec-handle", NULL)) {
+		sprop = of_get_property(of_find_node_by_path("/"),
+					"compatible", NULL);
+		/* Strip "fsl," in the compatible name if applicable */
+		p = strrchr(sprop, ',');
+		if (p)
+			sprop = p + 1;
+		snprintf(ssi->card_name, sizeof(ssi->card_name),
+			 "snd-soc-%s", sprop);
+		make_lowercase(ssi->card_name);
+		ssi->card_idx = 0;
+	}
+
+	return 0;
+}
+
+static int fsl_ssi_probe(struct platform_device *pdev)
+{
+	struct regmap_config regconfig = fsl_ssi_regconfig;
+	struct device *dev = &pdev->dev;
+	struct fsl_ssi *ssi;
+	struct resource *res;
+	void __iomem *iomem;
+	int ret = 0;
+
+	ssi = devm_kzalloc(dev, sizeof(*ssi), GFP_KERNEL);
+	if (!ssi)
+		return -ENOMEM;
+
+	ssi->dev = dev;
+
+	/* Probe from DT */
+	ret = fsl_ssi_probe_from_dt(ssi);
+	if (ret)
+		return ret;
+
 	if (fsl_ssi_is_ac97(ssi)) {
 		memcpy(&ssi->cpu_dai_drv, &fsl_ssi_ac97_dai,
 		       sizeof(fsl_ssi_ac97_dai));
@@ -1424,15 +1484,11 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 			REG_SSI_SRMSK / sizeof(uint32_t) + 1;
 	}
 
-	ret = of_property_match_string(np, "clock-names", "ipg");
-	if (ret < 0) {
-		ssi->has_ipg_clk_name = false;
-		ssi->regs = devm_regmap_init_mmio(dev, iomem, &regconfig);
-	} else {
-		ssi->has_ipg_clk_name = true;
+	if (ssi->has_ipg_clk_name)
 		ssi->regs = devm_regmap_init_mmio_clk(dev, "ipg", iomem,
 						      &regconfig);
-	}
+	else
+		ssi->regs = devm_regmap_init_mmio(dev, iomem, &regconfig);
 	if (IS_ERR(ssi->regs)) {
 		dev_err(dev, "failed to init register map\n");
 		return PTR_ERR(ssi->regs);
@@ -1444,24 +1500,13 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 		return ssi->irq;
 	}
 
-	/* Set software limitations for synchronous mode */
-	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
-		if (!fsl_ssi_is_ac97(ssi)) {
-			ssi->cpu_dai_drv.symmetric_rates = 1;
-			ssi->cpu_dai_drv.symmetric_samplebits = 1;
-			ssi->synchronous = true;
-		}
-
+	/* Set software limitations for synchronous mode except AC97 */
+	if (ssi->synchronous && !fsl_ssi_is_ac97(ssi)) {
+		ssi->cpu_dai_drv.symmetric_rates = 1;
 		ssi->cpu_dai_drv.symmetric_channels = 1;
+		ssi->cpu_dai_drv.symmetric_samplebits = 1;
 	}
 
-	/* Fetch FIFO depth; Set to 8 for older DT without this property */
-	iprop = of_get_property(np, "fsl,fifo-depth", NULL);
-	if (iprop)
-		ssi->fifo_depth = be32_to_cpup(iprop);
-	else
-		ssi->fifo_depth = 8;
-
 	/*
 	 * Configure TX and RX DMA watermarks -- when to send a DMA request
 	 *
@@ -1526,50 +1571,17 @@ static int fsl_ssi_probe(struct platform_device *pdev)
 	if (ret)
 		goto error_asoc_register;
 
-	/* Bypass it if using newer DT bindings of ASoC machine drivers */
-	if (!of_get_property(np, "codec-handle", NULL))
-		goto done;
-
-	/*
-	 * Backward compatible for older bindings by manually triggering the
-	 * machine driver's probe(). Use /compatible property, including the
-	 * address of CPU DAI driver structure, as the name of machine driver.
-	 */
-	sprop = of_get_property(of_find_node_by_path("/"), "compatible", NULL);
-	/* Sometimes the compatible name has a "fsl," prefix, so we strip it. */
-	p = strrchr(sprop, ',');
-	if (p)
-		sprop = p + 1;
-	snprintf(name, sizeof(name), "snd-soc-%s", sprop);
-	make_lowercase(name);
-
-	ssi->pdev = platform_device_register_data(dev, name, 0, NULL, 0);
-	if (IS_ERR(ssi->pdev)) {
-		ret = PTR_ERR(ssi->pdev);
-		dev_err(dev, "failed to register platform: %d\n", ret);
-		goto error_sound_card;
-	}
-
-done:
 	/* Initially configures SSI registers */
 	fsl_ssi_hw_init(ssi);
 
-	if (fsl_ssi_is_ac97(ssi)) {
-		u32 ssi_idx;
-
-		ret = of_property_read_u32(np, "cell-index", &ssi_idx);
-		if (ret) {
-			dev_err(dev, "failed to get SSI index property\n");
-			goto error_sound_card;
-		}
-
-		ssi->pdev = platform_device_register_data(NULL, "ac97-codec",
-							  ssi_idx, NULL, 0);
-		if (IS_ERR(ssi->pdev)) {
-			ret = PTR_ERR(ssi->pdev);
-			dev_err(dev,
-				"failed to register AC97 codec platform: %d\n",
-				ret);
+	/* Register a platform device for older bindings or AC97 */
+	if (ssi->card_name[0]) {
+		ssi->card_pdev = platform_device_register_data(dev,
+				ssi->card_name, ssi->card_idx, NULL, 0);
+		if (IS_ERR(ssi->card_pdev)) {
+			ret = PTR_ERR(ssi->card_pdev);
+			dev_err(dev, "failed to register %s: %d\n",
+				ssi->card_name, ret);
 			goto error_sound_card;
 		}
 	}
@@ -1599,8 +1611,8 @@ static int fsl_ssi_remove(struct platform_device *pdev)
 
 	fsl_ssi_debugfs_remove(&ssi->dbg_stats);
 
-	if (ssi->pdev)
-		platform_device_unregister(ssi->pdev);
+	if (ssi->card_pdev)
+		platform_device_unregister(ssi->card_pdev);
 
 	if (ssi->soc->imx)
 		fsl_ssi_imx_clean(pdev, ssi);
-- 
2.7.4

  parent reply	other threads:[~2018-01-15  4:23 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-15  4:21 [PATCH v3 00/17] ASoC: fsl_ssi: Clean up - program flow level Nicolin Chen
2018-01-15  4:21 ` Nicolin Chen
2018-01-15  4:21 ` [PATCH v3 01/17] ASoC: fsl_ssi: Redefine RX and TX macros Nicolin Chen
2018-01-15  4:21   ` Nicolin Chen
2018-02-22 13:17   ` Applied "ASoC: fsl_ssi: Redefine RX and TX macros" to the asoc tree Mark Brown
2018-02-22 13:17     ` Mark Brown
2018-01-15  4:21 ` [PATCH v3 02/17] ASoC: fsl_ssi: Keep ssi->i2s_net updated Nicolin Chen
2018-01-15  4:21 ` [PATCH v3 03/17] ASoC: fsl_ssi: Clean up set_dai_tdm_slot() Nicolin Chen
2018-01-15  4:21   ` Nicolin Chen
2018-01-15  4:21 ` [PATCH v3 04/17] ASoC: fsl_ssi: Maintain a mask of active streams Nicolin Chen
2018-01-15  4:21   ` Nicolin Chen
2018-02-22 13:17   ` Applied "ASoC: fsl_ssi: Maintain a mask of active streams" to the asoc tree Mark Brown
2018-02-22 13:17     ` Mark Brown
2018-01-15  4:21 ` [PATCH v3 05/17] ASoC: fsl_ssi: Rename fsl_ssi_disable_val macro Nicolin Chen
2018-01-15  4:21   ` Nicolin Chen
2018-02-22 13:16   ` Applied "ASoC: fsl_ssi: Rename fsl_ssi_disable_val macro" to the asoc tree Mark Brown
2018-02-22 13:16     ` Mark Brown
2018-01-15  4:21 ` [PATCH v3 06/17] ASoC: fsl_ssi: Clear FIFO directly in fsl_ssi_config() Nicolin Chen
2018-01-15  4:21 ` [PATCH v3 07/17] ASoC: fsl_ssi: Clean up helper functions of trigger() Nicolin Chen
2018-01-15  4:21   ` Nicolin Chen
2018-02-22 13:16   ` Applied "ASoC: fsl_ssi: Clean up helper functions of trigger()" to the asoc tree Mark Brown
2018-02-22 13:16     ` Mark Brown
2018-01-15  4:21 ` [PATCH v3 08/17] ASoC: fsl_ssi: Add DAIFMT define for AC97 Nicolin Chen
2018-01-15  4:21   ` Nicolin Chen
2018-01-15  4:21 ` [PATCH v3 09/17] ASoC: fsl_ssi: Clean up fsl_ssi_setup_regvals() Nicolin Chen
2018-01-15  4:21 ` [PATCH v3 10/17] ASoC: fsl_ssi: Set xFEN0 and xFEN1 together Nicolin Chen
2018-01-15  4:21 ` [PATCH v3 11/17] ASoC: fsl_ssi: Use snd_soc_init_dma_data instead Nicolin Chen
2018-01-15  4:21 ` [PATCH v3 12/17] ASoC: fsl_ssi: Move one-time configurations to probe() Nicolin Chen
2018-01-15  4:21 ` [PATCH v3 13/17] ASoC: fsl_ssi: Setup AC97 in fsl_ssi_hw_init() Nicolin Chen
2018-01-15  4:21 ` [PATCH v3 14/17] ASoC: fsl_ssi: Clean up _fsl_ssi_set_dai_fmt() Nicolin Chen
2018-01-15 21:16   ` Maciej S. Szmigiero
2018-01-15 21:16     ` Maciej S. Szmigiero
2018-01-15 21:40     ` Nicolin Chen
2018-01-15 21:40       ` Nicolin Chen
2018-01-15  4:21 ` [PATCH v3 15/17] ASoC: fsl_ssi: Add bool synchronous to mark synchronous mode Nicolin Chen
2018-02-22 13:16   ` Applied "ASoC: fsl_ssi: Add bool synchronous to mark synchronous mode" to the asoc tree Mark Brown
2018-02-22 13:16     ` Mark Brown
2018-01-15  4:21 ` Nicolin Chen [this message]
2018-01-15 21:16   ` [PATCH v3 16/17] ASoC: fsl_ssi: Move DT related code to a separate probe() Maciej S. Szmigiero
2018-01-15 21:16     ` Maciej S. Szmigiero
2018-01-15 21:32     ` Nicolin Chen
2018-01-15 21:32       ` Nicolin Chen
2018-01-15  4:21 ` [PATCH v3 17/17] ASoC: fsl_ssi: Use ssi->streams instead of reading register Nicolin Chen
2018-01-15 18:35 ` [PATCH v3 00/17] ASoC: fsl_ssi: Clean up - program flow level Caleb Crome
2018-01-15 18:35   ` Caleb Crome

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1515990087-11598-17-git-send-email-nicoleotsuka@gmail.com \
    --to=nicoleotsuka@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=arnaud.mouiche@invoxia.com \
    --cc=broonie@kernel.org \
    --cc=caleb@crome.org \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=lukma@denx.de \
    --cc=mail@maciej.szmigiero.name \
    --cc=timur@tabi.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.