From mboxrd@z Thu Jan  1 00:00:00 1970
From: Matan Azrad <matan@mellanox.com>
Subject: [PATCH v5 3/8] net/failsafe: add probed etherdev capture
Date: Thu, 18 Jan 2018 10:01:44 +0000
Message-ID: <1516269709-15252-4-git-send-email-matan@mellanox.com>
References: <1516265026-6469-1-git-send-email-matan@mellanox.com>
 <1516269709-15252-1-git-send-email-matan@mellanox.com>
Mime-Version: 1.0
Content-Type: text/plain
Cc: Thomas Monjalon <thomas@monjalon.net>, dev@dpdk.org,
 stephen@networkplumber.org, Gaetan Rivet <gaetan.rivet@6wind.com>
To: Ferruh Yigit <ferruh.yigit@intel.com>
Return-path: <dev-bounces@dpdk.org>
Received: from EUR02-AM5-obe.outbound.protection.outlook.com
 (mail-eopbgr00061.outbound.protection.outlook.com [40.107.0.61])
 by dpdk.org (Postfix) with ESMTP id 9313A1B1D0
 for <dev@dpdk.org>; Thu, 18 Jan 2018 11:02:06 +0100 (CET)
In-Reply-To: <1516269709-15252-1-git-send-email-matan@mellanox.com>
List-Id: DPDK patches and discussions <dev.dpdk.org>
List-Unsubscribe: <https://dpdk.org/ml/options/dev>,
 <mailto:dev-request@dpdk.org?subject=unsubscribe>
List-Archive: <http://dpdk.org/ml/archives/dev/>
List-Post: <mailto:dev@dpdk.org>
List-Help: <mailto:dev-request@dpdk.org?subject=help>
List-Subscribe: <https://dpdk.org/ml/listinfo/dev>,
 <mailto:dev-request@dpdk.org?subject=subscribe>
Errors-To: dev-bounces@dpdk.org
Sender: "dev" <dev-bounces@dpdk.org>

Previous fail-safe code didn't support probed sub-devices capture and
failed when it tried to probe them.

Skip fail-safe sub-device probing when it already was probed.

Signed-off-by: Matan Azrad <matan@mellanox.com>
Cc: Gaetan Rivet <gaetan.rivet@6wind.com>
---
 doc/guides/nics/fail_safe.rst           | 17 +++++++
 drivers/net/failsafe/failsafe_args.c    |  2 -
 drivers/net/failsafe/failsafe_eal.c     | 78 ++++++++++++++++++++++++---------
 drivers/net/failsafe/failsafe_private.h |  2 +
 4 files changed, 77 insertions(+), 22 deletions(-)

diff --git a/doc/guides/nics/fail_safe.rst b/doc/guides/nics/fail_safe.rst
index 5b1b47e..3f72b59 100644
--- a/doc/guides/nics/fail_safe.rst
+++ b/doc/guides/nics/fail_safe.rst
@@ -93,6 +93,14 @@ Fail-safe command line parameters
   additional sub-device parameters if need be. They will be passed on to the
   sub-device.
 
+.. note::
+
+   In case of whitelist sub-device probed by EAL, fail-safe PMD will take the device
+   as is, which means that EAL device options are taken in this case.
+   When trying to use a PCI device automatically probed in blacklist mode,
+   the syntax for the fail-safe must be with the full PCI id:
+   Domain:Bus:Device.Function. See the usage example section.
+
 - **exec(<shell command>)** parameter
 
   This parameter allows the user to provide a command to the fail-safe PMD to
@@ -169,6 +177,15 @@ This section shows some example of using **testpmd** with a fail-safe PMD.
       $RTE_TARGET/build/app/testpmd -c 0xff -n 4 --no-pci \
          --vdev='net_failsafe0,exec(echo 84:00.0)' -- -i
 
+#. Start testpmd, automatically probing the device 84:00.0 and using it with
+   the fail-safe.
+ 
+   .. code-block:: console
+ 
+      $RTE_TARGET/build/app/testpmd -c 0xff -n 4 \
+         --vdev 'net_failsafe0,dev(0000:84:00.0),dev(net_ring0)' -- -i
+
+
 Using the Fail-safe PMD from an application
 -------------------------------------------
 
diff --git a/drivers/net/failsafe/failsafe_args.c b/drivers/net/failsafe/failsafe_args.c
index c711da4..583bf05 100644
--- a/drivers/net/failsafe/failsafe_args.c
+++ b/drivers/net/failsafe/failsafe_args.c
@@ -45,8 +45,6 @@
 
 #include "failsafe_private.h"
 
-#define DEVARGS_MAXLEN 4096
-
 /* Callback used when a new device is found in devargs */
 typedef int (parse_cb)(struct rte_eth_dev *dev, const char *params,
 		uint8_t head);
diff --git a/drivers/net/failsafe/failsafe_eal.c b/drivers/net/failsafe/failsafe_eal.c
index 19d26f5..33a5adf 100644
--- a/drivers/net/failsafe/failsafe_eal.c
+++ b/drivers/net/failsafe/failsafe_eal.c
@@ -36,39 +36,77 @@
 #include "failsafe_private.h"
 
 static int
+fs_ethdev_portid_get(const char *name, uint16_t *port_id)
+{
+	uint16_t pid;
+	size_t len;
+
+	if (name == NULL) {
+		DEBUG("Null pointer is specified\n");
+		return -EINVAL;
+	}
+	len = strlen(name);
+	RTE_ETH_FOREACH_DEV(pid) {
+		if (!strncmp(name, rte_eth_devices[pid].device->name, len)) {
+			*port_id = pid;
+			return 0;
+		}
+	}
+	return -ENODEV;
+}
+
+static int
 fs_bus_init(struct rte_eth_dev *dev)
 {
 	struct sub_device *sdev;
 	struct rte_devargs *da;
 	uint8_t i;
-	uint16_t j;
+	uint16_t pid;
 	int ret;
 
 	FOREACH_SUBDEV(sdev, i, dev) {
 		if (sdev->state != DEV_PARSED)
 			continue;
 		da = &sdev->devargs;
-		ret = rte_eal_hotplug_add(da->bus->name,
-					  da->name,
-					  da->args);
-		if (ret) {
-			ERROR("sub_device %d probe failed %s%s%s", i,
-			      rte_errno ? "(" : "",
-			      rte_errno ? strerror(rte_errno) : "",
-			      rte_errno ? ")" : "");
-			continue;
-		}
-		RTE_ETH_FOREACH_DEV(j) {
-			if (strcmp(rte_eth_devices[j].device->name,
-				    da->name) == 0) {
-				ETH(sdev) = &rte_eth_devices[j];
-				break;
+		if (fs_ethdev_portid_get(da->name, &pid) != 0) {
+			ret = rte_eal_hotplug_add(da->bus->name,
+						  da->name,
+						  da->args);
+			if (ret) {
+				ERROR("sub_device %d probe failed %s%s%s", i,
+				      rte_errno ? "(" : "",
+				      rte_errno ? strerror(rte_errno) : "",
+				      rte_errno ? ")" : "");
+				continue;
 			}
+			if (fs_ethdev_portid_get(da->name, &pid) != 0) {
+				ERROR("sub_device %d init went wrong", i);
+				return -ENODEV;
+			}
+		} else {
+			char devstr[DEVARGS_MAXLEN] = "";
+			struct rte_devargs *probed_da =
+					rte_eth_devices[pid].device->devargs;
+
+			/* Take control of device probed by EAL options. */
+			free(da->args);
+			memset(da, 0, sizeof(*da));
+			if (probed_da != NULL)
+				snprintf(devstr, sizeof(devstr), "%s,%s",
+					 probed_da->name, probed_da->args);
+			else
+				snprintf(devstr, sizeof(devstr), "%s",
+					 rte_eth_devices[pid].device->name);
+			ret = rte_eal_devargs_parse(devstr, da);
+			if (ret) {
+				ERROR("Probed devargs parsing failed with code"
+				      " %d", ret);
+				return ret;
+			}
+			INFO("Taking control of a probed sub device"
+			      " %d named %s", i, da->name);
 		}
-		if (ETH(sdev) == NULL) {
-			ERROR("sub_device %d init went wrong", i);
-			return -ENODEV;
-		}
+		ETH(sdev) = &rte_eth_devices[pid];
 		SUB_ID(sdev) = i;
 		sdev->fs_dev = dev;
 		sdev->dev = ETH(sdev)->device;
diff --git a/drivers/net/failsafe/failsafe_private.h b/drivers/net/failsafe/failsafe_private.h
index 5e04ffe..9fcf72e 100644
--- a/drivers/net/failsafe/failsafe_private.h
+++ b/drivers/net/failsafe/failsafe_private.h
@@ -58,6 +58,8 @@
 #define FAILSAFE_MAX_ETHPORTS 2
 #define FAILSAFE_MAX_ETHADDR 128
 
+#define DEVARGS_MAXLEN 4096
+
 /* TYPES */
 
 struct rxq {
-- 
1.8.3.1