[virtio] [PATCH v7 11/11] split-ring: in order feature

["Michael S. Tsirkin" <mst@redhat.com>]

For a split ring, require that drivers use descriptors in order too.
This allows devices to skip reading the available ring.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 split-ring.tex | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/split-ring.tex b/split-ring.tex
index f976e45..43c496c 100644
--- a/split-ring.tex
+++ b/split-ring.tex
@@ -203,6 +203,10 @@ struct virtq_desc {
 The number of descriptors in the table is defined by the queue size
 for this virtqueue: this is the maximum possible descriptor chain length.
 
+If VIRTIO_F_IN_ORDER has been negotiated, driver uses
+descriptors in ring order: starting from offset 0 in the table,
+and wrapping around at the end of the table.
+
 \begin{note}
 The legacy \hyperref[intro:Virtio PCI Draft]{[Virtio PCI Draft]}
 referred to this structure as vring_desc, and the constants as
@@ -218,6 +222,12 @@ purposes).
 Drivers MUST NOT add a descriptor chain over than $2^{32}$ bytes long in total;
 this implies that loops in the descriptor chain are forbidden!
 
+If VIRTIO_F_IN_ORDER has been negotiated, and when making a
+descriptor with VRING_DESC_F_NEXT set in \field{flags} at offset
+$x$ in the table available to the device, driver MUST set
+\field{next} to $0$ for the last descriptor in the table
+(where $x = queue_size - 1$) and to $x + 1$ for the rest of the descriptors.
+
 \subsubsection{Indirect Descriptors}\label{sec:Basic Facilities of a Virtio Device / Virtqueues / The Virtqueue Descriptor Table / Indirect Descriptors}
 
 Some devices benefit by concurrently dispatching a large number
@@ -247,6 +257,10 @@ chained by \field{next}. An indirect descriptor without a valid \field{next}
 A single indirect descriptor
 table can include both device-readable and device-writable descriptors.
 
+If VIRTIO_F_IN_ORDER has been negotiated, indirect descriptors
+use sequential indices, in-order: index 0 followed by index 1
+followed by index 2, etc.
+
 \drivernormative{\paragraph}{Indirect Descriptors}{Basic Facilities of a Virtio Device / Virtqueues / The Virtqueue Descriptor Table / Indirect Descriptors}
 The driver MUST NOT set the VIRTQ_DESC_F_INDIRECT flag unless the
 VIRTIO_F_INDIRECT_DESC feature was negotiated.   The driver MUST NOT
@@ -259,6 +273,10 @@ the device.
 A driver MUST NOT set both VIRTQ_DESC_F_INDIRECT and VIRTQ_DESC_F_NEXT
 in \field{flags}.
 
+If VIRTIO_F_IN_ORDER has been negotiated, indirect descriptors
+MUST appear sequentially, with \field{next} taking the value
+of 1 for the 1st descriptor, 2 for the 2nd one, etc.
+
 \devicenormative{\paragraph}{Indirect Descriptors}{Basic Facilities of a Virtio Device / Virtqueues / The Virtqueue Descriptor Table / Indirect Descriptors}
 The device MUST ignore the write-only flag (\field{flags}\&VIRTQ_DESC_F_WRITE) in the descriptor that refers to an indirect table.
 
-- 
MST


---------------------------------------------------------------------
To unsubscribe from this mail list, you must leave the OASIS TC that 
generates this mail.  Follow this link to all your TCs in OASIS at:
https://www.oasis-open.org/apps/org/workgroup/portal/my_workgroups.php