[PATCH] Documentation: mips: Update AU1xxx_IDE Kconfig dependencies

[PATCH] Documentation: mips: Update AU1xxx_IDE Kconfig dependencies

[Corentin Labbe]

IDEDMA_AUTO IDEDMA_PCI_AUTO was removed in commit 120b9cfddff2 ("ide: remove CONFIG_IDEDMA_{ICS,PCI}_AUTO config")
BLK_DEV_IDEDISK was removed in commit 806f80a6fc20 ("ide: add generic ATA/ATAPI disk driver")
BLK_DEV_IDE_AU1XXX_BURSTABLE_ON was removed in commit 8f29e650bffc ("ide: AU1200 IDE update")
Remove them from documentation

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
 Documentation/mips/AU1xxx_IDE.README | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README
index 52844a58cc8a..ff675a1b1422 100644
--- a/Documentation/mips/AU1xxx_IDE.README
+++ b/Documentation/mips/AU1xxx_IDE.README
@@ -56,8 +56,6 @@ Following extra configs variables are introduced:
 
   CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA    - enable the PIO+DBDMA mode
   CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA  - enable the MWDMA mode
-  CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
-                                           controller
 
 
 SUPPORTED IDE MODES
@@ -82,11 +80,9 @@ CONFIG_IDE_GENERIC=y
 CONFIG_BLK_DEV_IDEPCI=y
 CONFIG_BLK_DEV_GENERIC=y
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_IDEDMA_PCI_AUTO=y
 CONFIG_BLK_DEV_IDE_AU1XXX=y
 CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDEDMA_AUTO=y
 
 Also define 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to enable
 the burst support on DBDMA controller.
@@ -94,16 +90,13 @@ the burst support on DBDMA controller.
 If the used system need the USB support enable the following kernel configs for
 high IDE to USB throughput.
 
-CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDE_GENERIC=y
 CONFIG_BLK_DEV_IDEPCI=y
 CONFIG_BLK_DEV_GENERIC=y
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-CONFIG_IDEDMA_PCI_AUTO=y
 CONFIG_BLK_DEV_IDE_AU1XXX=y
 CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDEDMA_AUTO=y
 
 Also undefine 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to
 disable the burst support on DBDMA controller.
-- 
2.13.6

Re: [PATCH] Documentation: mips: Update AU1xxx_IDE Kconfig dependencies

[Jonathan Corbet]

On Mon, 29 Jan 2018 12:21:07 +0000
Corentin Labbe <clabbe@baylibre.com> wrote:

> IDEDMA_AUTO IDEDMA_PCI_AUTO was removed in commit 120b9cfddff2 ("ide: remove CONFIG_IDEDMA_{ICS,PCI}_AUTO config")
> BLK_DEV_IDEDISK was removed in commit 806f80a6fc20 ("ide: add generic ATA/ATAPI disk driver")
> BLK_DEV_IDE_AU1XXX_BURSTABLE_ON was removed in commit 8f29e650bffc ("ide: AU1200 IDE update")
> Remove them from documentation

Applied to the docs tree, thanks.

jon