From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Date: Tue, 6 Feb 2018 20:45:20 +0530 Subject: [U-Boot] [PATCH 03/11] sunxi: Use MFD_SUN6I_PRCM if used In-Reply-To: <1517930128-26181-1-git-send-email-jagan@amarulasolutions.com> References: <1517930128-26181-1-git-send-email-jagan@amarulasolutions.com> Message-ID: <1517930128-26181-4-git-send-email-jagan@amarulasolutions.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de MFD_SUN6I_PRCM is also used for SUN8I and SUN9I, so select the same on respective MACH types. Signed-off-by: Jagan Teki --- arch/arm/mach-sunxi/Kconfig | 2 ++ arch/arm/mach-sunxi/Makefile | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 319bee1..cf999ab 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -182,6 +182,7 @@ config MACH_SUN8I_V3S config MACH_SUN9I bool "sun9i (Allwinner A80)" select CPU_V7 + select MFD_SUN6I_PRCM select SUNXI_HIGH_SRAM select SUNXI_GEN_SUN6I select SUPPORT_SPL @@ -212,6 +213,7 @@ endchoice # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33" config MACH_SUN8I bool + select MFD_SUN6I_PRCM default y if MACH_SUN8I_A23 default y if MACH_SUN8I_A33 default y if MACH_SUN8I_A83T diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 22e73d7..a6721ad 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -18,8 +18,6 @@ obj-y += usb_phy.o endif obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o -obj-$(CONFIG_MACH_SUN8I) += prcm.o -obj-$(CONFIG_MACH_SUN9I) += prcm.o obj-$(CONFIG_MACH_SUN8I) += rsb.o obj-$(CONFIG_MACH_SUN9I) += rsb.o obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o -- 2.7.4