From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jagan Teki Date: Sun, 11 Feb 2018 15:48:50 +0530 Subject: [U-Boot] [PATCH v2 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry In-Reply-To: <1518344340-13672-1-git-send-email-jagan@amarulasolutions.com> References: <1518344340-13672-1-git-send-email-jagan@amarulasolutions.com> Message-ID: <1518344340-13672-2-git-send-email-jagan@amarulasolutions.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Add simple and meaningful kconfig option for prcm.c instead of using MACH type on Makefile. PRCM (Power/Reset/Clock Management) is considered as a Multi-Functional Device, so used the same on Kconfig definition. Signed-off-by: Jagan Teki --- arch/arm/mach-sunxi/Kconfig | 7 +++++++ arch/arm/mach-sunxi/Makefile | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 1fededd..2b9f48b 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -6,6 +6,12 @@ config SPL_LDSCRIPT config IDENT_STRING default " Allwinner Technology" +config MFD_SUN6I_PRCM + bool "Allwinner A31 PRCM controller" + help + Support for the PRCM (Power/Reset/Clock Management) unit available + in A31 SoC. + config SUNXI_HIGH_SRAM bool default n @@ -87,6 +93,7 @@ config MACH_SUN6I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI + select MFD_SUN6I_PRCM select SUNXI_GEN_SUN6I select SUPPORT_SPL select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile index 2a3c379..3c1c660 100644 --- a/arch/arm/mach-sunxi/Makefile +++ b/arch/arm/mach-sunxi/Makefile @@ -16,7 +16,7 @@ obj-y += pinmux.o ifndef CONFIG_MACH_SUN9I obj-y += usb_phy.o endif -obj-$(CONFIG_MACH_SUN6I) += prcm.o +obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o obj-$(CONFIG_MACH_SUN8I) += prcm.o obj-$(CONFIG_MACH_SUN9I) += prcm.o obj-$(CONFIG_MACH_SUN6I) += p2wi.o -- 2.7.4