* [U-Boot] [PATCH v2 00/11] arm: sunxi: Use proper and meaningful Kconfig entries
@ 2018-02-11 10:18 Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry Jagan Teki
` (10 more replies)
0 siblings, 11 replies; 15+ messages in thread
From: Jagan Teki @ 2018-02-11 10:18 UTC (permalink / raw)
To: u-boot
Current arch/arm/mach-sunxi/Makefile has improper build options
which relies mostly on MACH_ options. This series get rid of those
and added proper Kconfig options.
All Kconfig entry name are re-used from Linux so-that future
dm conversion on these can be meaningful.
Changes for v2:
- Renamed PMIC_SUNXI to PMIC_AXP, so it PMIC driver implies to have AXP helpers
and name start with PMIC_ sothat the notation can compatible with pmic dm-drivers
Jagan Teki (11):
sunxi: Add MFD_SUN6I_PRCM kconfig entry
sunxi: Add I2C_SUN6I_P2WI kconfig entry
sunxi: Use MFD_SUN6I_PRCM if used
sunxi: Add SUNXI_RSB kconfig entry
sunxi: Add PMIC_AXP kconfig entry
sunxi: add DRAM_SUN6I kconfig
sunxi: Add DRAM_SUN4I kconfig entry
sunxi: Add DRAM_SUN9I kconfig entry
sunxi: Add DRAM_SUN8I_A23 kconfig entry
sunxi: Add DRAM_SUN8I_A33 kconfig entry
sunxi: Add DRAM_SUN8I_A83T kconfig entry
arch/arm/mach-sunxi/Kconfig | 81 ++++++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-sunxi/Makefile | 30 ++++++----------
drivers/power/Kconfig | 5 +++
3 files changed, 96 insertions(+), 20 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v2 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry
2018-02-11 10:18 [U-Boot] [PATCH v2 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
@ 2018-02-11 10:18 ` Jagan Teki
2018-02-12 4:26 ` Chen-Yu Tsai
2018-02-11 10:18 ` [U-Boot] [PATCH v2 02/11] sunxi: Add I2C_SUN6I_P2WI " Jagan Teki
` (9 subsequent siblings)
10 siblings, 1 reply; 15+ messages in thread
From: Jagan Teki @ 2018-02-11 10:18 UTC (permalink / raw)
To: u-boot
Add simple and meaningful kconfig option for prcm.c
instead of using MACH type on Makefile.
PRCM (Power/Reset/Clock Management) is considered as a
Multi-Functional Device, so used the same on Kconfig definition.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 7 +++++++
arch/arm/mach-sunxi/Makefile | 2 +-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 1fededd..2b9f48b 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -6,6 +6,12 @@ config SPL_LDSCRIPT
config IDENT_STRING
default " Allwinner Technology"
+config MFD_SUN6I_PRCM
+ bool "Allwinner A31 PRCM controller"
+ help
+ Support for the PRCM (Power/Reset/Clock Management) unit available
+ in A31 SoC.
+
config SUNXI_HIGH_SRAM
bool
default n
@@ -87,6 +93,7 @@ config MACH_SUN6I
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
+ select MFD_SUN6I_PRCM
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 2a3c379..3c1c660 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -16,7 +16,7 @@ obj-y += pinmux.o
ifndef CONFIG_MACH_SUN9I
obj-y += usb_phy.o
endif
-obj-$(CONFIG_MACH_SUN6I) += prcm.o
+obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o
obj-$(CONFIG_MACH_SUN8I) += prcm.o
obj-$(CONFIG_MACH_SUN9I) += prcm.o
obj-$(CONFIG_MACH_SUN6I) += p2wi.o
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v2 02/11] sunxi: Add I2C_SUN6I_P2WI kconfig entry
2018-02-11 10:18 [U-Boot] [PATCH v2 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry Jagan Teki
@ 2018-02-11 10:18 ` Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 03/11] sunxi: Use MFD_SUN6I_PRCM if used Jagan Teki
` (8 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Jagan Teki @ 2018-02-11 10:18 UTC (permalink / raw)
To: u-boot
Add simple and meaningful kconfig option for p2wi.c
instead of using MACH type on Makefile.
p2wi is an I2C controller, so used the same on kconfig
definition.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 12 ++++++++++++
arch/arm/mach-sunxi/Makefile | 2 +-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 2b9f48b..319bee1 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -6,6 +6,17 @@ config SPL_LDSCRIPT
config IDENT_STRING
default " Allwinner Technology"
+config I2C_SUN6I_P2WI
+ bool "Allwinner sun6i internal P2WI controller"
+ help
+ If you say yes to this option, support will be included for the
+ P2WI (Push/Pull 2 Wire Interface) controller embedded in some sunxi
+ SOCs.
+ The P2WI looks like an SMBus controller (which supports only byte
+ accesses), except that it only supports one slave device.
+ This interface is used to connect to specific PMIC devices (like the
+ AXP221).
+
config MFD_SUN6I_PRCM
bool "Allwinner A31 PRCM controller"
help
@@ -93,6 +104,7 @@ config MACH_SUN6I
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
+ select I2C_SUN6I_P2WI
select MFD_SUN6I_PRCM
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 3c1c660..22e73d7 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -16,10 +16,10 @@ obj-y += pinmux.o
ifndef CONFIG_MACH_SUN9I
obj-y += usb_phy.o
endif
+obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o
obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o
obj-$(CONFIG_MACH_SUN8I) += prcm.o
obj-$(CONFIG_MACH_SUN9I) += prcm.o
-obj-$(CONFIG_MACH_SUN6I) += p2wi.o
obj-$(CONFIG_MACH_SUN8I) += rsb.o
obj-$(CONFIG_MACH_SUN9I) += rsb.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v2 03/11] sunxi: Use MFD_SUN6I_PRCM if used
2018-02-11 10:18 [U-Boot] [PATCH v2 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 02/11] sunxi: Add I2C_SUN6I_P2WI " Jagan Teki
@ 2018-02-11 10:18 ` Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 04/11] sunxi: Add SUNXI_RSB kconfig entry Jagan Teki
` (7 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Jagan Teki @ 2018-02-11 10:18 UTC (permalink / raw)
To: u-boot
MFD_SUN6I_PRCM is also used for SUN8I and SUN9I, so
select the same on respective MACH types.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 2 ++
arch/arm/mach-sunxi/Makefile | 2 --
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 319bee1..cf999ab 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -182,6 +182,7 @@ config MACH_SUN8I_V3S
config MACH_SUN9I
bool "sun9i (Allwinner A80)"
select CPU_V7
+ select MFD_SUN6I_PRCM
select SUNXI_HIGH_SRAM
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
@@ -212,6 +213,7 @@ endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
config MACH_SUN8I
bool
+ select MFD_SUN6I_PRCM
default y if MACH_SUN8I_A23
default y if MACH_SUN8I_A33
default y if MACH_SUN8I_A83T
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 22e73d7..a6721ad 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -18,8 +18,6 @@ obj-y += usb_phy.o
endif
obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o
obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o
-obj-$(CONFIG_MACH_SUN8I) += prcm.o
-obj-$(CONFIG_MACH_SUN9I) += prcm.o
obj-$(CONFIG_MACH_SUN8I) += rsb.o
obj-$(CONFIG_MACH_SUN9I) += rsb.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v2 04/11] sunxi: Add SUNXI_RSB kconfig entry
2018-02-11 10:18 [U-Boot] [PATCH v2 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
` (2 preceding siblings ...)
2018-02-11 10:18 ` [U-Boot] [PATCH v2 03/11] sunxi: Use MFD_SUN6I_PRCM if used Jagan Teki
@ 2018-02-11 10:18 ` Jagan Teki
2018-02-13 9:39 ` Maxime Ripard
2018-02-11 10:18 ` [U-Boot] [PATCH v2 05/11] sunxi: Add PMIC_AXP " Jagan Teki
` (6 subsequent siblings)
10 siblings, 1 reply; 15+ messages in thread
From: Jagan Teki @ 2018-02-11 10:18 UTC (permalink / raw)
To: u-boot
Add simple and meaningful kconfig option for rsb.c
instead of using MACH type on Makefile.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 10 ++++++++++
arch/arm/mach-sunxi/Makefile | 3 +--
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index cf999ab..7ab1990 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -23,6 +23,14 @@ config MFD_SUN6I_PRCM
Support for the PRCM (Power/Reset/Clock Management) unit available
in A31 SoC.
+config SUNXI_RSB
+ bool "Allwinner sunXi Reduced Serial Bus Driver"
+ help
+ Say y here to enable support for Allwinner's Reduced Serial Bus
+ (RSB) support. This controller is responsible for communicating
+ with various RSB based devices, such as AXP223, AXP8XX PMICs,
+ and AC100/AC200 ICs.
+
config SUNXI_HIGH_SRAM
bool
default n
@@ -185,6 +193,7 @@ config MACH_SUN9I
select MFD_SUN6I_PRCM
select SUNXI_HIGH_SRAM
select SUNXI_GEN_SUN6I
+ select SUNXI_RSB
select SUPPORT_SPL
config MACH_SUN50I
@@ -213,6 +222,7 @@ endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
config MACH_SUN8I
bool
+ select SUNXI_RSB
select MFD_SUN6I_PRCM
default y if MACH_SUN8I_A23
default y if MACH_SUN8I_A33
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index a6721ad..8f30979 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -18,8 +18,7 @@ obj-y += usb_phy.o
endif
obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o
obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o
-obj-$(CONFIG_MACH_SUN8I) += rsb.o
-obj-$(CONFIG_MACH_SUN9I) += rsb.o
+obj-$(CONFIG_SUNXI_RSB) += rsb.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v2 05/11] sunxi: Add PMIC_AXP kconfig entry
2018-02-11 10:18 [U-Boot] [PATCH v2 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
` (3 preceding siblings ...)
2018-02-11 10:18 ` [U-Boot] [PATCH v2 04/11] sunxi: Add SUNXI_RSB kconfig entry Jagan Teki
@ 2018-02-11 10:18 ` Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 06/11] sunxi: add DRAM_SUN6I kconfig Jagan Teki
` (5 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Jagan Teki @ 2018-02-11 10:18 UTC (permalink / raw)
To: u-boot
Add simple and meaningful kconfig option for pmic_bus.c
instead of using MACH type on Makefile.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 6 ++++++
arch/arm/mach-sunxi/Makefile | 7 +------
drivers/power/Kconfig | 5 +++++
3 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 7ab1990..62c17c2 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -23,6 +23,12 @@ config MFD_SUN6I_PRCM
Support for the PRCM (Power/Reset/Clock Management) unit available
in A31 SoC.
+config PMIC_AXP
+ bool "Sunxi AXP PMIC bus access helpers"
+ help
+ Select this PMIC bus access helpers for Sunxi platform PRCM or other
+ AXP family PMIC devices.
+
config SUNXI_RSB
bool "Allwinner sunXi Reduced Serial Bus Driver"
help
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 8f30979..c2b49ab 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -18,6 +18,7 @@ obj-y += usb_phy.o
endif
obj-$(CONFIG_I2C_SUN6I_P2WI) += p2wi.o
obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o
+obj-$(CONFIG_PMIC_AXP) += pmic_bus.o
obj-$(CONFIG_SUNXI_RSB) += rsb.o
obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o
@@ -31,12 +32,6 @@ obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o
endif
obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o
-obj-$(CONFIG_AXP152_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP209_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP221_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP809_POWER) += pmic_bus.o
-obj-$(CONFIG_AXP818_POWER) += pmic_bus.o
-
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index d8c107e..c004f5a 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -22,6 +22,7 @@ config SUNXI_NO_PMIC
config AXP152_POWER
bool "axp152 pmic support"
depends on MACH_SUN5I
+ select PMIC_AXP
select CMD_POWEROFF
---help---
Select this to enable support for the axp152 pmic found on most
@@ -30,6 +31,7 @@ config AXP152_POWER
config AXP209_POWER
bool "axp209 pmic support"
depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
+ select PMIC_AXP
select CMD_POWEROFF
---help---
Select this to enable support for the axp209 pmic found on most
@@ -38,6 +40,7 @@ config AXP209_POWER
config AXP221_POWER
bool "axp221 / axp223 pmic support"
depends on MACH_SUN6I || MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUN8I_R40
+ select PMIC_AXP
select CMD_POWEROFF
---help---
Select this to enable support for the axp221/axp223 pmic found on most
@@ -46,6 +49,7 @@ config AXP221_POWER
config AXP809_POWER
bool "axp809 pmic support"
depends on MACH_SUN9I
+ select PMIC_AXP
select CMD_POWEROFF
---help---
Say y here to enable support for the axp809 pmic found on A80 boards.
@@ -53,6 +57,7 @@ config AXP809_POWER
config AXP818_POWER
bool "axp818 pmic support"
depends on MACH_SUN8I_A83T
+ select PMIC_AXP
select CMD_POWEROFF
---help---
Say y here to enable support for the axp818 pmic found on
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v2 06/11] sunxi: add DRAM_SUN6I kconfig
2018-02-11 10:18 [U-Boot] [PATCH v2 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
` (4 preceding siblings ...)
2018-02-11 10:18 ` [U-Boot] [PATCH v2 05/11] sunxi: Add PMIC_AXP " Jagan Teki
@ 2018-02-11 10:18 ` Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 07/11] sunxi: Add DRAM_SUN4I kconfig entry Jagan Teki
` (4 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Jagan Teki @ 2018-02-11 10:18 UTC (permalink / raw)
To: u-boot
Add proper and simple kconfig option for dram_sun6i.c
instead of using MACH type on Makefile.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 7 +++++++
arch/arm/mach-sunxi/Makefile | 2 +-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 62c17c2..bd877a6 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -6,6 +6,12 @@ config SPL_LDSCRIPT
config IDENT_STRING
default " Allwinner Technology"
+config DRAM_SUN6I
+ bool "Sun6i platform dram controller driver"
+ help
+ Select this dram controller driver for Sun6i platforms,
+ like A31/A31s.
+
config I2C_SUN6I_P2WI
bool "Allwinner sun6i internal P2WI controller"
help
@@ -118,6 +124,7 @@ config MACH_SUN6I
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
+ select DRAM_SUN6I
select I2C_SUN6I_P2WI
select MFD_SUN6I_PRCM
select SUNXI_GEN_SUN6I
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index c2b49ab..3703a52 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -33,9 +33,9 @@ endif
obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o
ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o
obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o
-obj-$(CONFIG_MACH_SUN6I) += dram_sun6i.o
obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o
obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v2 07/11] sunxi: Add DRAM_SUN4I kconfig entry
2018-02-11 10:18 [U-Boot] [PATCH v2 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
` (5 preceding siblings ...)
2018-02-11 10:18 ` [U-Boot] [PATCH v2 06/11] sunxi: add DRAM_SUN6I kconfig Jagan Teki
@ 2018-02-11 10:18 ` Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 08/11] sunxi: Add DRAM_SUN9I " Jagan Teki
` (3 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Jagan Teki @ 2018-02-11 10:18 UTC (permalink / raw)
To: u-boot
Add proper and simple kconfig option for dram_sun4i.c
instead of using MACH type on Makefile.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 9 +++++++++
arch/arm/mach-sunxi/Makefile | 4 +---
2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index bd877a6..ec881db 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -6,6 +6,12 @@ config SPL_LDSCRIPT
config IDENT_STRING
default " Allwinner Technology"
+config DRAM_SUN4I
+ bool "Sun4/5/7i platform dram controller driver"
+ help
+ Select this dram controller driver for Sun4/5/7i platforms,
+ like A10/A13/A20.
+
config DRAM_SUN6I
bool "Sun6i platform dram controller driver"
help
@@ -108,6 +114,7 @@ config MACH_SUN4I
bool "sun4i (Allwinner A10)"
select CPU_V7
select ARM_CORTEX_CPU_IS_UP
+ select DRAM_SUN4I
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
@@ -115,6 +122,7 @@ config MACH_SUN5I
bool "sun5i (Allwinner A13)"
select CPU_V7
select ARM_CORTEX_CPU_IS_UP
+ select DRAM_SUN4I
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
@@ -137,6 +145,7 @@ config MACH_SUN7I
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
+ select DRAM_SUN4I
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 3703a52..1c2dcfa 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -33,10 +33,8 @@ endif
obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o
ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o
obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o
-obj-$(CONFIG_MACH_SUN4I) += dram_sun4i.o
-obj-$(CONFIG_MACH_SUN5I) += dram_sun4i.o
-obj-$(CONFIG_MACH_SUN7I) += dram_sun4i.o
obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o
obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o
obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v2 08/11] sunxi: Add DRAM_SUN9I kconfig entry
2018-02-11 10:18 [U-Boot] [PATCH v2 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
` (6 preceding siblings ...)
2018-02-11 10:18 ` [U-Boot] [PATCH v2 07/11] sunxi: Add DRAM_SUN4I kconfig entry Jagan Teki
@ 2018-02-11 10:18 ` Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 09/11] sunxi: Add DRAM_SUN8I_A23 " Jagan Teki
` (2 subsequent siblings)
10 siblings, 0 replies; 15+ messages in thread
From: Jagan Teki @ 2018-02-11 10:18 UTC (permalink / raw)
To: u-boot
Add proper and simple kconfig option for dram_sun9i.c
instead of using MACH type on Makefile.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 7 +++++++
arch/arm/mach-sunxi/Makefile | 2 +-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index ec881db..570e18e 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -18,6 +18,12 @@ config DRAM_SUN6I
Select this dram controller driver for Sun6i platforms,
like A31/A31s.
+config DRAM_SUN9I
+ bool "Sun9i platform dram controller driver"
+ help
+ Select this dram controller driver for Sun9i platforms,
+ like A80.
+
config I2C_SUN6I_P2WI
bool "Allwinner sun6i internal P2WI controller"
help
@@ -212,6 +218,7 @@ config MACH_SUN8I_V3S
config MACH_SUN9I
bool "sun9i (Allwinner A80)"
select CPU_V7
+ select DRAM_SUN9I
select MFD_SUN6I_PRCM
select SUNXI_HIGH_SRAM
select SUNXI_GEN_SUN6I
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 1c2dcfa..83fee7d 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -35,10 +35,10 @@ obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o
obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o
+obj-$(CONFIG_DRAM_SUN9I) += dram_sun9i.o
obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o
obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o
obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o
obj-$(CONFIG_SUNXI_DRAM_DW) += dram_timings/
-obj-$(CONFIG_MACH_SUN9I) += dram_sun9i.o
endif
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v2 09/11] sunxi: Add DRAM_SUN8I_A23 kconfig entry
2018-02-11 10:18 [U-Boot] [PATCH v2 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
` (7 preceding siblings ...)
2018-02-11 10:18 ` [U-Boot] [PATCH v2 08/11] sunxi: Add DRAM_SUN9I " Jagan Teki
@ 2018-02-11 10:18 ` Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 10/11] sunxi: Add DRAM_SUN8I_A33 " Jagan Teki
2018-02-11 10:19 ` [U-Boot] [PATCH v2 11/11] sunxi: Add DRAM_SUN8I_A83T " Jagan Teki
10 siblings, 0 replies; 15+ messages in thread
From: Jagan Teki @ 2018-02-11 10:18 UTC (permalink / raw)
To: u-boot
Add proper and simple kconfig option for dram_sun8i_a23.c
instead of using MACH type on Makefile.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 7 +++++++
arch/arm/mach-sunxi/Makefile | 2 +-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 570e18e..d4e8e85 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -18,6 +18,12 @@ config DRAM_SUN6I
Select this dram controller driver for Sun6i platforms,
like A31/A31s.
+config DRAM_SUN8I_A23
+ bool "Sun8i A23 platform dram controller driver"
+ help
+ Select this dram controller driver for Sun8i platforms,
+ for A23 SOC.
+
config DRAM_SUN9I
bool "Sun9i platform dram controller driver"
help
@@ -162,6 +168,7 @@ config MACH_SUN8I_A23
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
+ select DRAM_SUN8I_A23
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 83fee7d..8b3cbd7 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -35,8 +35,8 @@ obj-$(CONFIG_MACH_SUN9I) += clock_sun9i.o gtbus_sun9i.o
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o
obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o
+obj-$(CONFIG_DRAM_SUN8I_A23) += dram_sun8i_a23.o
obj-$(CONFIG_DRAM_SUN9I) += dram_sun9i.o
-obj-$(CONFIG_MACH_SUN8I_A23) += dram_sun8i_a23.o
obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o
obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v2 10/11] sunxi: Add DRAM_SUN8I_A33 kconfig entry
2018-02-11 10:18 [U-Boot] [PATCH v2 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
` (8 preceding siblings ...)
2018-02-11 10:18 ` [U-Boot] [PATCH v2 09/11] sunxi: Add DRAM_SUN8I_A23 " Jagan Teki
@ 2018-02-11 10:18 ` Jagan Teki
2018-02-11 10:19 ` [U-Boot] [PATCH v2 11/11] sunxi: Add DRAM_SUN8I_A83T " Jagan Teki
10 siblings, 0 replies; 15+ messages in thread
From: Jagan Teki @ 2018-02-11 10:18 UTC (permalink / raw)
To: u-boot
Add proper and simple kconfig option for dram_sun8i_a33.c
instead of using MACH type on Makefile.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 7 +++++++
arch/arm/mach-sunxi/Makefile | 2 +-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index d4e8e85..dac086d 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -24,6 +24,12 @@ config DRAM_SUN8I_A23
Select this dram controller driver for Sun8i platforms,
for A23 SOC.
+config DRAM_SUN8I_A33
+ bool "Sun8i A33 platform dram controller driver"
+ help
+ Select this dram controller driver for Sun8i platforms,
+ for A33 SOC.
+
config DRAM_SUN9I
bool "Sun9i platform dram controller driver"
help
@@ -179,6 +185,7 @@ config MACH_SUN8I_A33
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
select ARCH_SUPPORT_PSCI
+ select DRAM_SUN8I_A33
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index 8b3cbd7..d65968d 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -36,8 +36,8 @@ ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o
obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o
obj-$(CONFIG_DRAM_SUN8I_A23) += dram_sun8i_a23.o
+obj-$(CONFIG_DRAM_SUN8I_A33) += dram_sun8i_a33.o
obj-$(CONFIG_DRAM_SUN9I) += dram_sun9i.o
-obj-$(CONFIG_MACH_SUN8I_A33) += dram_sun8i_a33.o
obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o
obj-$(CONFIG_SUNXI_DRAM_DW) += dram_timings/
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v2 11/11] sunxi: Add DRAM_SUN8I_A83T kconfig entry
2018-02-11 10:18 [U-Boot] [PATCH v2 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
` (9 preceding siblings ...)
2018-02-11 10:18 ` [U-Boot] [PATCH v2 10/11] sunxi: Add DRAM_SUN8I_A33 " Jagan Teki
@ 2018-02-11 10:19 ` Jagan Teki
10 siblings, 0 replies; 15+ messages in thread
From: Jagan Teki @ 2018-02-11 10:19 UTC (permalink / raw)
To: u-boot
Add proper and simple kconfig option for dram_sun8i_a83t.c
instead of using MACH type on Makefile.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
arch/arm/mach-sunxi/Kconfig | 7 +++++++
arch/arm/mach-sunxi/Makefile | 2 +-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index dac086d..ef765fd 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -30,6 +30,12 @@ config DRAM_SUN8I_A33
Select this dram controller driver for Sun8i platforms,
for A33 SOC.
+config DRAM_SUN8I_A83T
+ bool "Sun8i A83T platform dram controller driver"
+ help
+ Select this dram controller driver for Sun8i platforms,
+ for A83T SOC.
+
config DRAM_SUN9I
bool "Sun9i platform dram controller driver"
help
@@ -193,6 +199,7 @@ config MACH_SUN8I_A33
config MACH_SUN8I_A83T
bool "sun8i (Allwinner A83T)"
select CPU_V7
+ select DRAM_SUN8I_A83T
select SUNXI_GEN_SUN6I
select MMC_SUNXI_HAS_NEW_MODE
select SUPPORT_SPL
diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
index d65968d..0fcf341 100644
--- a/arch/arm/mach-sunxi/Makefile
+++ b/arch/arm/mach-sunxi/Makefile
@@ -37,8 +37,8 @@ obj-$(CONFIG_DRAM_SUN4I) += dram_sun4i.o
obj-$(CONFIG_DRAM_SUN6I) += dram_sun6i.o
obj-$(CONFIG_DRAM_SUN8I_A23) += dram_sun8i_a23.o
obj-$(CONFIG_DRAM_SUN8I_A33) += dram_sun8i_a33.o
+obj-$(CONFIG_DRAM_SUN8I_A83T) += dram_sun8i_a83t.o
obj-$(CONFIG_DRAM_SUN9I) += dram_sun9i.o
-obj-$(CONFIG_MACH_SUN8I_A83T) += dram_sun8i_a83t.o
obj-$(CONFIG_SUNXI_DRAM_DW) += dram_sunxi_dw.o
obj-$(CONFIG_SUNXI_DRAM_DW) += dram_timings/
endif
--
2.7.4
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v2 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry
2018-02-11 10:18 ` [U-Boot] [PATCH v2 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry Jagan Teki
@ 2018-02-12 4:26 ` Chen-Yu Tsai
2018-02-13 18:07 ` Jagan Teki
0 siblings, 1 reply; 15+ messages in thread
From: Chen-Yu Tsai @ 2018-02-12 4:26 UTC (permalink / raw)
To: u-boot
On Sun, Feb 11, 2018 at 6:18 PM, Jagan Teki <jagannadh.teki@gmail.com> wrote:
> Add simple and meaningful kconfig option for prcm.c
> instead of using MACH type on Makefile.
>
> PRCM (Power/Reset/Clock Management) is considered as a
> Multi-Functional Device, so used the same on Kconfig definition.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> arch/arm/mach-sunxi/Kconfig | 7 +++++++
> arch/arm/mach-sunxi/Makefile | 2 +-
> 2 files changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index 1fededd..2b9f48b 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -6,6 +6,12 @@ config SPL_LDSCRIPT
> config IDENT_STRING
> default " Allwinner Technology"
>
> +config MFD_SUN6I_PRCM
> + bool "Allwinner A31 PRCM controller"
> + help
> + Support for the PRCM (Power/Reset/Clock Management) unit available
> + in A31 SoC.
> +
Do these entries even need to be visible?
It's not like it makes sense to toggle them independently.
This applies to almost all the patches in this series.
ChenYu
> config SUNXI_HIGH_SRAM
> bool
> default n
> @@ -87,6 +93,7 @@ config MACH_SUN6I
> select CPU_V7_HAS_NONSEC
> select CPU_V7_HAS_VIRT
> select ARCH_SUPPORT_PSCI
> + select MFD_SUN6I_PRCM
> select SUNXI_GEN_SUN6I
> select SUPPORT_SPL
> select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
> diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
> index 2a3c379..3c1c660 100644
> --- a/arch/arm/mach-sunxi/Makefile
> +++ b/arch/arm/mach-sunxi/Makefile
> @@ -16,7 +16,7 @@ obj-y += pinmux.o
> ifndef CONFIG_MACH_SUN9I
> obj-y += usb_phy.o
> endif
> -obj-$(CONFIG_MACH_SUN6I) += prcm.o
> +obj-$(CONFIG_MFD_SUN6I_PRCM) += prcm.o
> obj-$(CONFIG_MACH_SUN8I) += prcm.o
> obj-$(CONFIG_MACH_SUN9I) += prcm.o
> obj-$(CONFIG_MACH_SUN6I) += p2wi.o
> --
> 2.7.4
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot
^ permalink raw reply [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v2 04/11] sunxi: Add SUNXI_RSB kconfig entry
2018-02-11 10:18 ` [U-Boot] [PATCH v2 04/11] sunxi: Add SUNXI_RSB kconfig entry Jagan Teki
@ 2018-02-13 9:39 ` Maxime Ripard
0 siblings, 0 replies; 15+ messages in thread
From: Maxime Ripard @ 2018-02-13 9:39 UTC (permalink / raw)
To: u-boot
On Sun, Feb 11, 2018 at 03:48:53PM +0530, Jagan Teki wrote:
> Add simple and meaningful kconfig option for rsb.c
> instead of using MACH type on Makefile.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> arch/arm/mach-sunxi/Kconfig | 10 ++++++++++
> arch/arm/mach-sunxi/Makefile | 3 +--
> 2 files changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
> index cf999ab..7ab1990 100644
> --- a/arch/arm/mach-sunxi/Kconfig
> +++ b/arch/arm/mach-sunxi/Kconfig
> @@ -23,6 +23,14 @@ config MFD_SUN6I_PRCM
> Support for the PRCM (Power/Reset/Clock Management) unit available
> in A31 SoC.
>
> +config SUNXI_RSB
I still believe that it should be called SUN8I_RSB.
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180213/dfa509d1/attachment.sig>
^ permalink raw reply [flat|nested] 15+ messages in thread
* [U-Boot] [PATCH v2 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry
2018-02-12 4:26 ` Chen-Yu Tsai
@ 2018-02-13 18:07 ` Jagan Teki
0 siblings, 0 replies; 15+ messages in thread
From: Jagan Teki @ 2018-02-13 18:07 UTC (permalink / raw)
To: u-boot
On Mon, Feb 12, 2018 at 9:56 AM, Chen-Yu Tsai <wens@csie.org> wrote:
> On Sun, Feb 11, 2018 at 6:18 PM, Jagan Teki <jagannadh.teki@gmail.com> wrote:
>> Add simple and meaningful kconfig option for prcm.c
>> instead of using MACH type on Makefile.
>>
>> PRCM (Power/Reset/Clock Management) is considered as a
>> Multi-Functional Device, so used the same on Kconfig definition.
>>
>> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
>> ---
>> arch/arm/mach-sunxi/Kconfig | 7 +++++++
>> arch/arm/mach-sunxi/Makefile | 2 +-
>> 2 files changed, 8 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
>> index 1fededd..2b9f48b 100644
>> --- a/arch/arm/mach-sunxi/Kconfig
>> +++ b/arch/arm/mach-sunxi/Kconfig
>> @@ -6,6 +6,12 @@ config SPL_LDSCRIPT
>> config IDENT_STRING
>> default " Allwinner Technology"
>>
>> +config MFD_SUN6I_PRCM
>> + bool "Allwinner A31 PRCM controller"
>> + help
>> + Support for the PRCM (Power/Reset/Clock Management) unit available
>> + in A31 SoC.
>> +
>
> Do these entries even need to be visible?
> It's not like it makes sense to toggle them independently.
> This applies to almost all the patches in this series.
True with PRCM and DRAM and others shouldn't relate to arch code and
move to drivers in future.
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2018-02-13 18:07 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-02-11 10:18 [U-Boot] [PATCH v2 00/11] arm: sunxi: Use proper and meaningful Kconfig entries Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 01/11] sunxi: Add MFD_SUN6I_PRCM kconfig entry Jagan Teki
2018-02-12 4:26 ` Chen-Yu Tsai
2018-02-13 18:07 ` Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 02/11] sunxi: Add I2C_SUN6I_P2WI " Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 03/11] sunxi: Use MFD_SUN6I_PRCM if used Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 04/11] sunxi: Add SUNXI_RSB kconfig entry Jagan Teki
2018-02-13 9:39 ` Maxime Ripard
2018-02-11 10:18 ` [U-Boot] [PATCH v2 05/11] sunxi: Add PMIC_AXP " Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 06/11] sunxi: add DRAM_SUN6I kconfig Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 07/11] sunxi: Add DRAM_SUN4I kconfig entry Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 08/11] sunxi: Add DRAM_SUN9I " Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 09/11] sunxi: Add DRAM_SUN8I_A23 " Jagan Teki
2018-02-11 10:18 ` [U-Boot] [PATCH v2 10/11] sunxi: Add DRAM_SUN8I_A33 " Jagan Teki
2018-02-11 10:19 ` [U-Boot] [PATCH v2 11/11] sunxi: Add DRAM_SUN8I_A83T " Jagan Teki
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.