Patch "pinctrl: sx150x: Register pinctrl before adding the gpiochip" has been added to the 4.15-stable tree

Patch "pinctrl: sx150x: Register pinctrl before adding the gpiochip" has been added to the 4.15-stable tree

[gregkh]

This is a note to let you know that I've just added the patch titled

    pinctrl: sx150x: Register pinctrl before adding the gpiochip

to the 4.15-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     pinctrl-sx150x-register-pinctrl-before-adding-the-gpiochip.patch
and it can be found in the queue-4.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 1a1d39e1b8dd1d0f92a79da4fcc1ab0be3ae9bfc Mon Sep 17 00:00:00 2001
From: Peter Rosin <peda@axentia.se>
Date: Wed, 17 Jan 2018 14:34:22 +0100
Subject: pinctrl: sx150x: Register pinctrl before adding the gpiochip

From: Peter Rosin <peda@axentia.se>

commit 1a1d39e1b8dd1d0f92a79da4fcc1ab0be3ae9bfc upstream.

Various gpiolib activity depend on the pinctrl to be up and kicking.
Therefore, register the pinctrl before adding a gpiochip.

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/pinctrl-sx150x.c |   35 +++++++++++++++++++++--------------
 1 file changed, 21 insertions(+), 14 deletions(-)

--- a/drivers/pinctrl/pinctrl-sx150x.c
+++ b/drivers/pinctrl/pinctrl-sx150x.c
@@ -1144,6 +1144,27 @@ static int sx150x_probe(struct i2c_clien
 	if (ret)
 		return ret;
 
+	/* Pinctrl_desc */
+	pctl->pinctrl_desc.name = "sx150x-pinctrl";
+	pctl->pinctrl_desc.pctlops = &sx150x_pinctrl_ops;
+	pctl->pinctrl_desc.confops = &sx150x_pinconf_ops;
+	pctl->pinctrl_desc.pins = pctl->data->pins;
+	pctl->pinctrl_desc.npins = pctl->data->npins;
+	pctl->pinctrl_desc.owner = THIS_MODULE;
+
+	ret = devm_pinctrl_register_and_init(dev, &pctl->pinctrl_desc,
+					     pctl, &pctl->pctldev);
+	if (ret) {
+		dev_err(dev, "Failed to register pinctrl device\n");
+		return ret;
+	}
+
+	ret = pinctrl_enable(pctl->pctldev);
+	if (ret) {
+		dev_err(dev, "Failed to enable pinctrl device\n");
+		return ret;
+	}
+
 	/* Register GPIO controller */
 	pctl->gpio.label = devm_kstrdup(dev, client->name, GFP_KERNEL);
 	pctl->gpio.base = -1;
@@ -1217,20 +1238,6 @@ static int sx150x_probe(struct i2c_clien
 					    client->irq);
 	}
 
-	/* Pinctrl_desc */
-	pctl->pinctrl_desc.name = "sx150x-pinctrl";
-	pctl->pinctrl_desc.pctlops = &sx150x_pinctrl_ops;
-	pctl->pinctrl_desc.confops = &sx150x_pinconf_ops;
-	pctl->pinctrl_desc.pins = pctl->data->pins;
-	pctl->pinctrl_desc.npins = pctl->data->npins;
-	pctl->pinctrl_desc.owner = THIS_MODULE;
-
-	pctl->pctldev = devm_pinctrl_register(dev, &pctl->pinctrl_desc, pctl);
-	if (IS_ERR(pctl->pctldev)) {
-		dev_err(dev, "Failed to register pinctrl device\n");
-		return PTR_ERR(pctl->pctldev);
-	}
-
 	return 0;
 }
 


Patches currently in stable-queue which might be from peda@axentia.se are

queue-4.15/pinctrl-sx150x-register-pinctrl-before-adding-the-gpiochip.patch
queue-4.15/pinctrl-sx150x-unregister-the-pinctrl-on-release.patch
queue-4.15/pinctrl-sx150x-add-a-static-gpio-pinctrl-pin-range-mapping.patch