[Qemu-devel] [PATCH v2] fsl-imx6: Swap Ethernet interrupt defines

[Guenter Roeck <linux@roeck-us.net>]

The sabrelite machine model used by qemu-system-arm is based on the
Freescale/NXP i.MX6Q processor. This SoC has an on-board ethernet
controller which is supported in QEMU using the imx_fec.c module
(actually called imx.enet for this model.)

The include/hw/arm/fsm-imx6.h file defines the interrupt vectors for the
imx.enet device like this:

 #define FSL_IMX6_ENET_MAC_1588_IRQ 118
 #define FSL_IMX6_ENET_MAC_IRQ 119

According to https://www.nxp.com/docs/en/reference-manual/IMX6DQRM.pdf,
page 225, in Table 3-1. ARM Cortex A9 domain interrupt summary,
interrupts are as follows.

150 ENET MAC 0 IRQ
151 ENET MAC 0 1588 Timer interrupt

where

150 - 32 == 118
151 - 32 == 119

In other words, the vector definitions in the fsl-imx6.h file are reversed.

Fixing the interrupts alone causes problems with older Linux kernels:
The Ethernet interface will fail to probe with Linux v4.9 and earlier.
Linux v4.1 and earlier will crash due to a bug in Ethernet driver probe
error handling. This is a Linux kernel problem, not a qemu problem:
the Linux kernel only worked by accident since it requested both interrupts.

For backward compatibility, generate the Ethernet interrupt on both interrupt
lines. This was shown to work from all Linux kernel releases starting with
v3.16.

Link: https://bugs.launchpad.net/qemu/+bug/1753309
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
v2: Generate Ethernet interrupts on both interrupt lines

 hw/net/imx_fec.c          | 7 ++++++-
 include/hw/arm/fsl-imx6.h | 4 ++--
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/hw/net/imx_fec.c b/hw/net/imx_fec.c
index 9506f9b..d3ae7db 100644
--- a/hw/net/imx_fec.c
+++ b/hw/net/imx_fec.c
@@ -417,7 +417,12 @@ static void imx_enet_write_bd(IMXENETBufDesc *bd, dma_addr_t addr)
 
 static void imx_eth_update(IMXFECState *s)
 {
-    if (s->regs[ENET_EIR] & s->regs[ENET_EIMR] & ENET_INT_TS_TIMER) {
+    /*
+     * Generate ENET_INT_MAC interrrupts on both interrupt lines for
+     * backward compatibility with Linux kernel versions 4.9 and older.
+     */
+    if (s->regs[ENET_EIR] & s->regs[ENET_EIMR] &
+        (ENET_INT_MAC | ENET_INT_TS_TIMER)) {
         qemu_set_irq(s->irq[1], 1);
     } else {
         qemu_set_irq(s->irq[1], 0);
diff --git a/include/hw/arm/fsl-imx6.h b/include/hw/arm/fsl-imx6.h
index ec6c509..06f8aae 100644
--- a/include/hw/arm/fsl-imx6.h
+++ b/include/hw/arm/fsl-imx6.h
@@ -438,8 +438,8 @@ typedef struct FslIMX6State {
 #define FSL_IMX6_HDMI_MASTER_IRQ 115
 #define FSL_IMX6_HDMI_CEC_IRQ 116
 #define FSL_IMX6_MLB150_LOW_IRQ 117
-#define FSL_IMX6_ENET_MAC_1588_IRQ 118
-#define FSL_IMX6_ENET_MAC_IRQ 119
+#define FSL_IMX6_ENET_MAC_IRQ 118
+#define FSL_IMX6_ENET_MAC_1588_IRQ 119
 #define FSL_IMX6_PCIE1_IRQ 120
 #define FSL_IMX6_PCIE2_IRQ 121
 #define FSL_IMX6_PCIE3_IRQ 122
-- 
2.7.4