From: "Hernán Gonzalez" <hernan@vanguardiasur.com.ar>
To: lars@metafoo.de, Michael.Hennerich@analog.com, jic23@kernel.org,
knaack.h@gmx.de, pmeerw@pmeerw.net, linux-iio@vger.kernel.org,
linux-kernel@vger.kernel.org, hernan@vanguardiasur.com.ar
Subject: [PATCH 05/11] staging: iio: ad7746: Remove unused defines
Date: Wed, 21 Mar 2018 11:28:53 -0300 [thread overview]
Message-ID: <1521642539-4845-6-git-send-email-hernan@vanguardiasur.com.ar> (raw)
In-Reply-To: <1521642539-4845-1-git-send-email-hernan@vanguardiasur.com.ar>
Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar>
---
drivers/staging/iio/cdc/ad7746.c | 16 ----------------
drivers/staging/iio/cdc/ad7746.h | 5 -----
2 files changed, 21 deletions(-)
diff --git a/drivers/staging/iio/cdc/ad7746.c b/drivers/staging/iio/cdc/ad7746.c
index 57623db..cba8cd1 100644
--- a/drivers/staging/iio/cdc/ad7746.c
+++ b/drivers/staging/iio/cdc/ad7746.c
@@ -25,7 +25,6 @@
* AD7746 Register Definition
*/
-#define AD7746_REG_STATUS 0
#define AD7746_REG_CAP_DATA_HIGH 1
#define AD7746_REG_VT_DATA_HIGH 4
#define AD7746_REG_CAP_SETUP 7
@@ -38,17 +37,10 @@
#define AD7746_REG_CAP_GAINH 15
#define AD7746_REG_VOLT_GAINH 17
-/* Status Register Bit Designations (AD7746_REG_STATUS) */
-#define AD7746_STATUS_EXCERR BIT(3)
-#define AD7746_STATUS_RDY BIT(2)
-#define AD7746_STATUS_RDYVT BIT(1)
-#define AD7746_STATUS_RDYCAP BIT(0)
-
/* Capacitive Channel Setup Register Bit Designations (AD7746_REG_CAP_SETUP) */
#define AD7746_CAPSETUP_CAPEN BIT(7)
#define AD7746_CAPSETUP_CIN2 BIT(6) /* AD7746 only */
#define AD7746_CAPSETUP_CAPDIFF BIT(5)
-#define AD7746_CAPSETUP_CACHOP BIT(0)
/* Voltage/Temperature Setup Register Bit Designations (AD7746_REG_VT_SETUP) */
#define AD7746_VTSETUP_VTEN (1 << 7)
@@ -56,13 +48,8 @@
#define AD7746_VTSETUP_VTMD_EXT_TEMP (1 << 5)
#define AD7746_VTSETUP_VTMD_VDD_MON (2 << 5)
#define AD7746_VTSETUP_VTMD_EXT_VIN (3 << 5)
-#define AD7746_VTSETUP_EXTREF BIT(4)
-#define AD7746_VTSETUP_VTSHORT BIT(1)
-#define AD7746_VTSETUP_VTCHOP BIT(0)
/* Excitation Setup Register Bit Designations (AD7746_REG_EXC_SETUP) */
-#define AD7746_EXCSETUP_CLKCTRL BIT(7)
-#define AD7746_EXCSETUP_EXCON BIT(6)
#define AD7746_EXCSETUP_EXCB BIT(5)
#define AD7746_EXCSETUP_NEXCB BIT(4)
#define AD7746_EXCSETUP_EXCA BIT(3)
@@ -74,10 +61,7 @@
#define AD7746_CONF_CAPFS_SHIFT 3
#define AD7746_CONF_VTFS_MASK GENMASK(7, 6)
#define AD7746_CONF_CAPFS_MASK GENMASK(5, 3)
-#define AD7746_CONF_MODE_IDLE (0 << 0)
-#define AD7746_CONF_MODE_CONT_CONV (1 << 0)
#define AD7746_CONF_MODE_SINGLE_CONV (2 << 0)
-#define AD7746_CONF_MODE_PWRDN (3 << 0)
#define AD7746_CONF_MODE_OFFS_CAL (5 << 0)
#define AD7746_CONF_MODE_GAIN_CAL (6 << 0)
diff --git a/drivers/staging/iio/cdc/ad7746.h b/drivers/staging/iio/cdc/ad7746.h
index ea8572d..2fbcee8 100644
--- a/drivers/staging/iio/cdc/ad7746.h
+++ b/drivers/staging/iio/cdc/ad7746.h
@@ -13,11 +13,6 @@
* TODO: struct ad7746_platform_data needs to go into include/linux/iio
*/
-#define AD7466_EXCLVL_0 0 /* +-VDD/8 */
-#define AD7466_EXCLVL_1 1 /* +-VDD/4 */
-#define AD7466_EXCLVL_2 2 /* +-VDD * 3/8 */
-#define AD7466_EXCLVL_3 3 /* +-VDD/2 */
-
struct ad7746_platform_data {
unsigned char exclvl; /*Excitation Voltage Level */
bool exca_en; /* enables EXCA pin as the excitation output */
--
2.7.4
next prev parent reply other threads:[~2018-03-21 14:30 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-21 14:28 [PATCH 00/11] Move ad7746 out of staging Hernán Gonzalez
2018-03-21 14:28 ` [PATCH 01/11] staging: iio: ad7746: Adjust arguments to match open parenthesis Hernán Gonzalez
2018-03-23 12:36 ` Jonathan Cameron
2018-03-21 14:28 ` [PATCH 02/11] staging: iio: ad7746: Fix multiple line dereference Hernán Gonzalez
2018-03-21 14:28 ` [PATCH 03/11] staging: iio: ad7746: Reorder includes alphabetically Hernán Gonzalez
2018-03-21 14:28 ` [PATCH 04/11] staging: iio: ad7746: Reorder variable declarations Hernán Gonzalez
2018-03-23 12:40 ` Jonathan Cameron
2018-03-23 12:40 ` Jonathan Cameron
2018-03-21 14:28 ` Hernán Gonzalez [this message]
2018-03-23 12:44 ` [PATCH 05/11] staging: iio: ad7746: Remove unused defines Jonathan Cameron
2018-03-23 12:44 ` Jonathan Cameron
2018-03-21 14:28 ` [PATCH 06/11] staging: iio: ad7746: Add dt-bindings Hernán Gonzalez
2018-03-23 12:46 ` Jonathan Cameron
2018-03-21 14:28 ` [PATCH 07/11] staging: iio: ad7746: Add remove() Hernán Gonzalez
2018-03-23 12:48 ` Jonathan Cameron
2018-03-23 12:48 ` Jonathan Cameron
2018-03-21 14:28 ` [PATCH 08/11] staging: iio: ad7746: Add comments Hernán Gonzalez
2018-03-23 12:52 ` Jonathan Cameron
2018-03-21 14:28 ` [PATCH 09/11] staging: iio: ad7746: Add devicetree bindings documentation Hernán Gonzalez
2018-03-23 12:54 ` Jonathan Cameron
2018-03-21 14:28 ` [PATCH 10/11] staging: iio: ad7746: Rename sysfs attrs to comply with the ABI Hernán Gonzalez
2018-03-23 12:57 ` Jonathan Cameron
2018-03-23 12:57 ` Jonathan Cameron
2018-03-21 14:28 ` [PATCH 11/11] Move cdc ad7746 driver out of staging to mainline iio Hernán Gonzalez
2018-03-23 10:21 ` kbuild test robot
2018-03-23 12:33 ` Jonathan Cameron
2018-03-23 12:59 ` Jonathan Cameron
2018-03-23 13:04 ` [PATCH 00/11] Move ad7746 out of staging Jonathan Cameron
2018-03-23 13:04 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1521642539-4845-6-git-send-email-hernan@vanguardiasur.com.ar \
--to=hernan@vanguardiasur.com.ar \
--cc=Michael.Hennerich@analog.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.