All of lore.kernel.org
 help / color / mirror / Atom feed
From: Samuel Li <Samuel.Li-5C7GfCeVMHo@public.gmane.org>
To: amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: Samuel Li <Samuel.Li-5C7GfCeVMHo@public.gmane.org>
Subject: [PATCH v2 1/1] drm/amdgpu: Enable scatter gather display support
Date: Tue, 27 Mar 2018 18:22:51 -0400	[thread overview]
Message-ID: <1522189371-13767-1-git-send-email-Samuel.Li@amd.com> (raw)

It's auto by default. For CZ/ST, auto setting enables sg display
when vram size is small; otherwise still uses vram.
This patch fixed some potential hang issue introduced by change
"allow framebuffer in GART memory as well" due to CZ/ST hardware
limitation.

v2: Change default setting to auto, also some misc changes.
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu.h               |  1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_display.c       | 10 ++++++++--
 drivers/gpu/drm/amd/amdgpu/amdgpu_display.h       |  2 ++
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c           |  4 ++++
 drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c            |  2 ++
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |  3 ++-
 6 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
index a7e2229..c942362 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
@@ -129,6 +129,7 @@ extern int amdgpu_lbpw;
 extern int amdgpu_compute_multipipe;
 extern int amdgpu_gpu_recovery;
 extern int amdgpu_emu_mode;
+extern int amdgpu_sg_display;
 
 #ifdef CONFIG_DRM_AMDGPU_SI
 extern int amdgpu_si_support;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
index 5495b29..1e7b950 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
@@ -513,8 +513,14 @@ uint32_t amdgpu_display_framebuffer_domains(struct amdgpu_device *adev)
 #if defined(CONFIG_DRM_AMD_DC)
 	if (adev->asic_type >= CHIP_CARRIZO && adev->asic_type < CHIP_RAVEN &&
 	    adev->flags & AMD_IS_APU &&
-	    amdgpu_device_asic_has_dc_support(adev->asic_type))
-		domain |= AMDGPU_GEM_DOMAIN_GTT;
+	    amdgpu_device_asic_has_dc_support(adev->asic_type)) {
+		if (amdgpu_sg_display == 1)
+			domain = AMDGPU_GEM_DOMAIN_GTT;
+		else if (amdgpu_sg_display == -1) {
+			if (adev->gmc.real_vram_size < AMDGPU_SG_THRESHOLD)
+				domain = AMDGPU_GEM_DOMAIN_GTT;
+		}
+	}
 #endif
 
 	return domain;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.h
index 2b11d80..2b25393 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.h
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.h
@@ -23,6 +23,8 @@
 #ifndef __AMDGPU_DISPLAY_H__
 #define __AMDGPU_DISPLAY_H__
 
+#define AMDGPU_SG_THRESHOLD  (256*1024*1024)
+
 uint32_t amdgpu_display_framebuffer_domains(struct amdgpu_device *adev);
 struct drm_framebuffer *
 amdgpu_display_user_framebuffer_create(struct drm_device *dev,
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 1bfce79..19f11a5 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -132,6 +132,7 @@ int amdgpu_lbpw = -1;
 int amdgpu_compute_multipipe = -1;
 int amdgpu_gpu_recovery = -1; /* auto */
 int amdgpu_emu_mode = 0;
+int amdgpu_sg_display = -1;
 
 MODULE_PARM_DESC(vramlimit, "Restrict VRAM for testing, in megabytes");
 module_param_named(vramlimit, amdgpu_vram_limit, int, 0600);
@@ -290,6 +291,9 @@ module_param_named(gpu_recovery, amdgpu_gpu_recovery, int, 0444);
 MODULE_PARM_DESC(emu_mode, "Emulation mode, (1 = enable, 0 = disable)");
 module_param_named(emu_mode, amdgpu_emu_mode, int, 0444);
 
+MODULE_PARM_DESC(sg_display, "Enable scatter gather display, (1 = enable, 0 = disable, -1 = auto");
+module_param_named(sg_display, amdgpu_sg_display, int, 0444);
+
 #ifdef CONFIG_DRM_AMDGPU_SI
 
 #if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
index 1206301..f57c355 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fb.c
@@ -138,6 +138,8 @@ static int amdgpufb_create_pinned_object(struct amdgpu_fbdev *rfbdev,
 	mode_cmd->pitches[0] = amdgpu_align_pitch(adev, mode_cmd->width, cpp,
 						  fb_tiled);
 	domain = amdgpu_display_framebuffer_domains(adev);
+	if (domain & AMDGPU_GEM_DOMAIN_GTT)
+		DRM_DEBUG_DRIVER("Scatter gather display: enabled\n");
 
 	height = ALIGN(mode_cmd->height, 8);
 	size = mode_cmd->pitches[0] * height;
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 68ab325..7e9f247 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -3074,7 +3074,8 @@ static int dm_plane_helper_prepare_fb(struct drm_plane *plane,
 		domain = AMDGPU_GEM_DOMAIN_VRAM;
 
 	r = amdgpu_bo_pin(rbo, domain, &afb->address);
-
+	rbo->preferred_domains = domain;
+	rbo->allowed_domains = domain;
 	amdgpu_bo_unreserve(rbo);
 
 	if (unlikely(r != 0)) {
-- 
2.7.4

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

             reply	other threads:[~2018-03-27 22:22 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-27 22:22 Samuel Li [this message]
     [not found] ` <1522189371-13767-1-git-send-email-Samuel.Li-5C7GfCeVMHo@public.gmane.org>
2018-03-28  7:46   ` [PATCH v2 1/1] drm/amdgpu: Enable scatter gather display support Christian König
     [not found]     ` <7cc47f78-66eb-148d-96a2-b97760f767bf-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-04-12 16:40       ` Marek Olšák
     [not found]         ` <CAAxE2A4msxZa19Cvv6giMDDYg57-M_qawgFRM2aaK6sUERuqSA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-04-12 17:03           ` Christian König
     [not found]             ` <15196bc3-76cb-0a52-c05f-f23131f77e7f-5C7GfCeVMHo@public.gmane.org>
2018-04-12 17:21               ` Samuel Li
     [not found]                 ` <20bdb4b1-1986-22e4-b0d1-1713b8794f83-5C7GfCeVMHo@public.gmane.org>
2018-04-12 18:00                   ` Christian König
     [not found]                     ` <de4659b0-918a-e548-d6ee-12f3a9e88df5-5C7GfCeVMHo@public.gmane.org>
2018-04-12 18:07                       ` Samuel Li
     [not found]                         ` <277e44be-d618-ad29-06d2-ea12466571c9-5C7GfCeVMHo@public.gmane.org>
2018-04-12 18:47                           ` Christian König
     [not found]                             ` <18325399-d78e-2442-ccf4-55e30d9f5c52-5C7GfCeVMHo@public.gmane.org>
2018-04-12 20:01                               ` Samuel Li
     [not found]                                 ` <b461df89-0638-77a7-409a-346c64521a40-5C7GfCeVMHo@public.gmane.org>
2018-04-12 20:13                                   ` Christian König
     [not found]                                     ` <5f492910-cac3-643f-efec-472f791e551e-5C7GfCeVMHo@public.gmane.org>
2018-04-12 20:42                                       ` Samuel Li
     [not found]                                         ` <83a2320e-74a9-4539-5b85-0e80a35525fb-5C7GfCeVMHo@public.gmane.org>
2018-04-12 22:48                                           ` Christian König

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1522189371-13767-1-git-send-email-Samuel.Li@amd.com \
    --to=samuel.li-5c7gfcevmho@public.gmane.org \
    --cc=amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.