From: <gregkh@linuxfoundation.org>
To: sz.lin@moxa.com, Holsety.Chen@moxa.com, davem@davemloft.net,
gregkh@linuxfoundation.org, grygorii.strashko@ti.com,
spatton@ti.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface" has been added to the 4.14-stable tree
Date: Wed, 28 Mar 2018 19:05:56 +0200 [thread overview]
Message-ID: <152225675617214@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-ethernet-ti-cpsw-add-check-for-in-band-mode-setting-with-rgmii-phy-interface.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Wed Mar 28 18:38:30 CEST 2018
From: "SZ Lin (林上智)" <sz.lin@moxa.com>
Date: Fri, 16 Mar 2018 00:56:01 +0800
Subject: net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface
From: "SZ Lin (林上智)" <sz.lin@moxa.com>
[ Upstream commit f9db50691db4a7d860fce985f080bb3fc23a7ede ]
According to AM335x TRM[1] 14.3.6.2, AM437x TRM[2] 15.3.6.2 and
DRA7 TRM[3] 24.11.4.8.7.3.3, in-band mode in EXT_EN(bit18) register is only
available when PHY is configured in RGMII mode with 10Mbps speed. It will
cause some networking issues without RGMII mode, such as carrier sense
errors and low throughput. TI also mentioned this issue in their forum[4].
This patch adds the check mechanism for PHY interface with RGMII interface
type, the in-band mode can only be set in RGMII mode with 10Mbps speed.
References:
[1]: https://www.ti.com/lit/ug/spruh73p/spruh73p.pdf
[2]: http://www.ti.com/lit/ug/spruhl7h/spruhl7h.pdf
[3]: http://www.ti.com/lit/ug/spruic2b/spruic2b.pdf
[4]: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/640765/2392155
Suggested-by: Holsety Chen (陳憲輝) <Holsety.Chen@moxa.com>
Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com>
Signed-off-by: Schuyler Patton <spatton@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/ti/cpsw.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -996,7 +996,8 @@ static void _cpsw_adjust_link(struct cps
/* set speed_in input in case RMII mode is used in 100Mbps */
if (phy->speed == 100)
mac_control |= BIT(15);
- else if (phy->speed == 10)
+ /* in band mode only works in 10Mbps RGMII mode */
+ else if ((phy->speed == 10) && phy_interface_is_rgmii(phy))
mac_control |= BIT(18); /* In Band mode */
if (priv->rx_pause)
Patches currently in stable-queue which might be from sz.lin@moxa.com are
queue-4.14/net-ethernet-ti-cpsw-add-check-for-in-band-mode-setting-with-rgmii-phy-interface.patch
reply other threads:[~2018-03-28 17:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=152225675617214@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=Holsety.Chen@moxa.com \
--cc=davem@davemloft.net \
--cc=grygorii.strashko@ti.com \
--cc=spatton@ti.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=sz.lin@moxa.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.