From: <gregkh@linuxfoundation.org>
To: f.fainelli@gmail.com, davem@davemloft.net, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "net: systemport: Rewrite __bcm_sysport_tx_reclaim()" has been added to the 4.14-stable tree
Date: Wed, 28 Mar 2018 19:06:09 +0200 [thread overview]
Message-ID: <15222567693599@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
net: systemport: Rewrite __bcm_sysport_tx_reclaim()
to the 4.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-systemport-rewrite-__bcm_sysport_tx_reclaim.patch
and it can be found in the queue-4.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Wed Mar 28 18:38:30 CEST 2018
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 13 Mar 2018 14:45:07 -0700
Subject: net: systemport: Rewrite __bcm_sysport_tx_reclaim()
From: Florian Fainelli <f.fainelli@gmail.com>
[ Upstream commit 484d802d0f2f29c335563fcac2a8facf174a1bbc ]
There is no need for complex checking between the last consumed index
and current consumed index, a simple subtraction will do.
This also eliminates the possibility of a permanent transmit queue stall
under the following conditions:
- one CPU bursts ring->size worth of traffic (up to 256 buffers), to the
point where we run out of free descriptors, so we stop the transmit
queue at the end of bcm_sysport_xmit()
- because of our locking, we have the transmit process disable
interrupts which means we can be blocking the TX reclamation process
- when TX reclamation finally runs, we will be computing the difference
between ring->c_index (last consumed index by SW) and what the HW
reports through its register
- this register is masked with (ring->size - 1) = 0xff, which will lead
to stripping the upper bits of the index (register is 16-bits wide)
- we will be computing last_tx_cn as 0, which means there is no work to
be done, and we never wake-up the transmit queue, leaving it
permanently disabled
A practical example is e.g: ring->c_index aka last_c_index = 12, we
pushed 256 entries, HW consumer index = 268, we mask it with 0xff = 12,
so last_tx_cn == 0, nothing happens.
Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/broadcom/bcmsysport.c | 33 +++++++++++++----------------
drivers/net/ethernet/broadcom/bcmsysport.h | 2 -
2 files changed, 16 insertions(+), 19 deletions(-)
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -855,10 +855,12 @@ static void bcm_sysport_tx_reclaim_one(s
static unsigned int __bcm_sysport_tx_reclaim(struct bcm_sysport_priv *priv,
struct bcm_sysport_tx_ring *ring)
{
- unsigned int c_index, last_c_index, last_tx_cn, num_tx_cbs;
unsigned int pkts_compl = 0, bytes_compl = 0;
struct net_device *ndev = priv->netdev;
+ unsigned int txbds_processed = 0;
struct bcm_sysport_cb *cb;
+ unsigned int txbds_ready;
+ unsigned int c_index;
u32 hw_ind;
/* Clear status before servicing to reduce spurious interrupts */
@@ -871,29 +873,23 @@ static unsigned int __bcm_sysport_tx_rec
/* Compute how many descriptors have been processed since last call */
hw_ind = tdma_readl(priv, TDMA_DESC_RING_PROD_CONS_INDEX(ring->index));
c_index = (hw_ind >> RING_CONS_INDEX_SHIFT) & RING_CONS_INDEX_MASK;
- ring->p_index = (hw_ind & RING_PROD_INDEX_MASK);
-
- last_c_index = ring->c_index;
- num_tx_cbs = ring->size;
-
- c_index &= (num_tx_cbs - 1);
-
- if (c_index >= last_c_index)
- last_tx_cn = c_index - last_c_index;
- else
- last_tx_cn = num_tx_cbs - last_c_index + c_index;
+ txbds_ready = (c_index - ring->c_index) & RING_CONS_INDEX_MASK;
netif_dbg(priv, tx_done, ndev,
- "ring=%d c_index=%d last_tx_cn=%d last_c_index=%d\n",
- ring->index, c_index, last_tx_cn, last_c_index);
+ "ring=%d old_c_index=%u c_index=%u txbds_ready=%u\n",
+ ring->index, ring->c_index, c_index, txbds_ready);
- while (last_tx_cn-- > 0) {
- cb = ring->cbs + last_c_index;
+ while (txbds_processed < txbds_ready) {
+ cb = &ring->cbs[ring->clean_index];
bcm_sysport_tx_reclaim_one(ring, cb, &bytes_compl, &pkts_compl);
ring->desc_count++;
- last_c_index++;
- last_c_index &= (num_tx_cbs - 1);
+ txbds_processed++;
+
+ if (likely(ring->clean_index < ring->size - 1))
+ ring->clean_index++;
+ else
+ ring->clean_index = 0;
}
u64_stats_update_begin(&priv->syncp);
@@ -1406,6 +1402,7 @@ static int bcm_sysport_init_tx_ring(stru
netif_tx_napi_add(priv->netdev, &ring->napi, bcm_sysport_tx_poll, 64);
ring->index = index;
ring->size = size;
+ ring->clean_index = 0;
ring->alloc_size = ring->size;
ring->desc_cpu = p;
ring->desc_count = ring->size;
--- a/drivers/net/ethernet/broadcom/bcmsysport.h
+++ b/drivers/net/ethernet/broadcom/bcmsysport.h
@@ -706,7 +706,7 @@ struct bcm_sysport_tx_ring {
unsigned int desc_count; /* Number of descriptors */
unsigned int curr_desc; /* Current descriptor */
unsigned int c_index; /* Last consumer index */
- unsigned int p_index; /* Current producer index */
+ unsigned int clean_index; /* Current clean index */
struct bcm_sysport_cb *cbs; /* Transmit control blocks */
struct dma_desc *desc_cpu; /* CPU view of the descriptor */
struct bcm_sysport_priv *priv; /* private context backpointer */
Patches currently in stable-queue which might be from f.fainelli@gmail.com are
queue-4.14/net-systemport-rewrite-__bcm_sysport_tx_reclaim.patch
queue-4.14/sysfs-symlink-export-sysfs_create_link_nowarn.patch
queue-4.14/net-fec-fix-unbalanced-pm-runtime-calls.patch
queue-4.14/net-phy-relax-error-checking-when-creating-sysfs-link-netdev-phydev.patch
reply other threads:[~2018-03-28 17:06 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15222567693599@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=f.fainelli@gmail.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.