All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ilia Lin <ilialin@codeaurora.org>
To: mturquette@baylibre.com, sboyd@kernel.org, robh@kernel.org,
	mark.rutland@arm.com, rjw@rjwysocki.net, viresh.kumar@linaro.org,
	lgirdwood@gmail.com, broonie@kernel.org, andy.gross@linaro.org,
	david.brown@linaro.org, catalin.marinas@arm.com,
	will.deacon@arm.com, linux-clk@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Cc: rnayak@codeaurora.org, ilialin@codeaurora.org,
	amit.kucheria@linaro.org, nicolas.dechesne@linaro.org,
	celster@codeaurora.org, tfinkel@codeaurora.org
Subject: [PATCH v4 08/14] dt: qcom: Add opp and thermal to the msm8996
Date: Fri, 30 Mar 2018 00:26:41 +0300	[thread overview]
Message-ID: <1522358807-10413-9-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1522358807-10413-1-git-send-email-ilialin@codeaurora.org>

Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 275 +++++++++++++++++++++++++++++++++-
 1 file changed, 267 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 410ae78..a0792bd 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/clock/qcom,gcc-msm8996.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM8996";
@@ -97,6 +98,11 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			clocks = <&kryocc 0>;
+			operating-points-v2 = <&cluster0_opp>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
 			L2_0: l2-cache {
 			      compatible = "cache";
@@ -109,6 +115,11 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			clocks = <&kryocc 0>;
+			operating-points-v2 = <&cluster0_opp>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
 		};
 
@@ -117,6 +128,11 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			clocks = <&kryocc 1>;
+			operating-points-v2 = <&cluster1_opp>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_1>;
 			L2_1: l2-cache {
 			      compatible = "cache";
@@ -129,6 +145,11 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
+			clocks = <&kryocc 1>;
+			operating-points-v2 = <&cluster1_opp>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_1>;
 		};
 
@@ -155,6 +176,182 @@
 		};
 	};
 
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <  307200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-422400000 {
+			opp-hz = /bits/ 64 <  422400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <  480000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <  556800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <  652800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <  729600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <  844800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-960000000 {
+			opp-hz = /bits/ 64 <  960000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 < 1036800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 < 1113600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 < 1190400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1228800000 {
+			opp-hz = /bits/ 64 < 1228800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 < 1324800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 < 1401600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 < 1478400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 < 1593600000 >;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <  307200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-403200000 {
+			opp-hz = /bits/ 64 <  403200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <  480000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <  556800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <  652800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <  729600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-806400000 {
+			opp-hz = /bits/ 64 <  806400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-883200000 {
+			opp-hz = /bits/ 64 <  883200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-940800000 {
+			opp-hz = /bits/ 64 <  940800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 < 1036800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 < 1113600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 < 1190400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 < 1248000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 < 1324800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 < 1401600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 < 1478400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1555200000 {
+			opp-hz = /bits/ 64 < 1555200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1632000000 {
+			opp-hz = /bits/ 64 < 1632000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1708800000 {
+			opp-hz = /bits/ 64 < 1708800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1785600000 {
+			opp-hz = /bits/ 64 < 1785600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 < 1824000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1920000000 {
+			opp-hz = /bits/ 64 < 1920000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 < 1996800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-2073600000 {
+			opp-hz = /bits/ 64 < 2073600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 < 2150400000 >;
+			clock-latency-ns = <200000>;
+		};
+	};
+
 	thermal-zones {
 		cpu-thermal0 {
 			polling-delay-passive = <250>;
@@ -163,18 +360,34 @@
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				cpu_alert0: trip0 {
+				cpu_alert0: cpu_alert0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
+					type = "active";
+				};
+				cpu_warn0: cpu_warn0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit0: trip1 {
+				cpu_crit0: cpu_crit0 {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+				};
+				map1 {
+					trip = <&cpu_warn0>;
+					cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu-thermal1 {
@@ -184,18 +397,34 @@
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
-				cpu_alert1: trip0 {
+				cpu_alert1: cpu_alert1 {
 					temperature = <75000>;
 					hysteresis = <2000>;
+					type = "active";
+				};
+				cpu_warn1: cpu_warn1 {
+					temperature = <90000>;
+					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit1: trip1 {
+				cpu_crit1: cpu_crit1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+				};
+				map1 {
+					trip = <&cpu_warn1>;
+					cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu-thermal2 {
@@ -205,18 +434,33 @@
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
-				cpu_alert2: trip0 {
+				cpu_alert2: cpu_alert2 {
 					temperature = <75000>;
 					hysteresis = <2000>;
+					type = "active";
+				};
+				cpu_warn2: cpu_warn2 {
+					temperature = <90000>;
+					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit2: trip1 {
+				cpu_crit2: cpu_crit2 {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert2>;
+					cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+				};
+				map1 {
+					trip = <&cpu_warn2>;
+					cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu-thermal3 {
@@ -226,9 +470,14 @@
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				cpu_alert3: trip0 {
+				cpu_alert3: cpu_alert3 {
 					temperature = <75000>;
 					hysteresis = <2000>;
+					type = "active";
+				};
+				cpu_warn3: cpu_warn3 {
+					temperature = <90000>;
+					hysteresis = <2000>;
 					type = "passive";
 				};
 
@@ -238,6 +487,16 @@
 					type = "critical";
 				};
 			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert3>;
+					cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+				};
+				map1 {
+					trip = <&cpu_warn3>;
+					cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 
@@ -414,7 +673,7 @@
 		};
 
 		kryocc: clock-controller@6400000 {
-			compatible = "qcom,apcc-msm8996";
+			compatible = "qcom,msm8996-apcc";
 			reg = <0x6400000 0x90000>;
 			#clock-cells = <1>;
 		};
-- 
1.9.1

WARNING: multiple messages have this Message-ID
From: ilialin@codeaurora.org (Ilia Lin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 08/14] dt: qcom: Add opp and thermal to the msm8996
Date: Fri, 30 Mar 2018 00:26:41 +0300	[thread overview]
Message-ID: <1522358807-10413-9-git-send-email-ilialin@codeaurora.org> (raw)
In-Reply-To: <1522358807-10413-1-git-send-email-ilialin@codeaurora.org>

Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 275 +++++++++++++++++++++++++++++++++-
 1 file changed, 267 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 410ae78..a0792bd 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -14,6 +14,7 @@
 #include <dt-bindings/clock/qcom,gcc-msm8996.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8996.h>
 #include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM8996";
@@ -97,6 +98,11 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			clocks = <&kryocc 0>;
+			operating-points-v2 = <&cluster0_opp>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
 			L2_0: l2-cache {
 			      compatible = "cache";
@@ -109,6 +115,11 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			clocks = <&kryocc 0>;
+			operating-points-v2 = <&cluster0_opp>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
 		};
 
@@ -117,6 +128,11 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			clocks = <&kryocc 1>;
+			operating-points-v2 = <&cluster1_opp>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_1>;
 			L2_1: l2-cache {
 			      compatible = "cache";
@@ -129,6 +145,11 @@
 			compatible = "qcom,kryo";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
+			clocks = <&kryocc 1>;
+			operating-points-v2 = <&cluster1_opp>;
+			cooling-min-level = <0>;
+			cooling-max-level = <15>;
+			#cooling-cells = <2>;
 			next-level-cache = <&L2_1>;
 		};
 
@@ -155,6 +176,182 @@
 		};
 	};
 
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <  307200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-422400000 {
+			opp-hz = /bits/ 64 <  422400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <  480000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <  556800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <  652800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <  729600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-844800000 {
+			opp-hz = /bits/ 64 <  844800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-960000000 {
+			opp-hz = /bits/ 64 <  960000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 < 1036800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 < 1113600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 < 1190400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1228800000 {
+			opp-hz = /bits/ 64 < 1228800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 < 1324800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 < 1401600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 < 1478400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1593600000 {
+			opp-hz = /bits/ 64 < 1593600000 >;
+			clock-latency-ns = <200000>;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-307200000 {
+			opp-hz = /bits/ 64 <  307200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-403200000 {
+			opp-hz = /bits/ 64 <  403200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-480000000 {
+			opp-hz = /bits/ 64 <  480000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-556800000 {
+			opp-hz = /bits/ 64 <  556800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-652800000 {
+			opp-hz = /bits/ 64 <  652800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-729600000 {
+			opp-hz = /bits/ 64 <  729600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-806400000 {
+			opp-hz = /bits/ 64 <  806400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-883200000 {
+			opp-hz = /bits/ 64 <  883200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-940800000 {
+			opp-hz = /bits/ 64 <  940800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1036800000 {
+			opp-hz = /bits/ 64 < 1036800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1113600000 {
+			opp-hz = /bits/ 64 < 1113600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1190400000 {
+			opp-hz = /bits/ 64 < 1190400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1248000000 {
+			opp-hz = /bits/ 64 < 1248000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1324800000 {
+			opp-hz = /bits/ 64 < 1324800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1401600000 {
+			opp-hz = /bits/ 64 < 1401600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1478400000 {
+			opp-hz = /bits/ 64 < 1478400000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1555200000 {
+			opp-hz = /bits/ 64 < 1555200000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1632000000 {
+			opp-hz = /bits/ 64 < 1632000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1708800000 {
+			opp-hz = /bits/ 64 < 1708800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1785600000 {
+			opp-hz = /bits/ 64 < 1785600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1824000000 {
+			opp-hz = /bits/ 64 < 1824000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1920000000 {
+			opp-hz = /bits/ 64 < 1920000000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-1996800000 {
+			opp-hz = /bits/ 64 < 1996800000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-2073600000 {
+			opp-hz = /bits/ 64 < 2073600000 >;
+			clock-latency-ns = <200000>;
+		};
+		opp-2150400000 {
+			opp-hz = /bits/ 64 < 2150400000 >;
+			clock-latency-ns = <200000>;
+		};
+	};
+
 	thermal-zones {
 		cpu-thermal0 {
 			polling-delay-passive = <250>;
@@ -163,18 +360,34 @@
 			thermal-sensors = <&tsens0 3>;
 
 			trips {
-				cpu_alert0: trip0 {
+				cpu_alert0: cpu_alert0 {
 					temperature = <75000>;
 					hysteresis = <2000>;
+					type = "active";
+				};
+				cpu_warn0: cpu_warn0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit0: trip1 {
+				cpu_crit0: cpu_crit0 {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+				};
+				map1 {
+					trip = <&cpu_warn0>;
+					cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu-thermal1 {
@@ -184,18 +397,34 @@
 			thermal-sensors = <&tsens0 5>;
 
 			trips {
-				cpu_alert1: trip0 {
+				cpu_alert1: cpu_alert1 {
 					temperature = <75000>;
 					hysteresis = <2000>;
+					type = "active";
+				};
+				cpu_warn1: cpu_warn1 {
+					temperature = <90000>;
+					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit1: trip1 {
+				cpu_crit1: cpu_crit1 {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT 7>;
+				};
+				map1 {
+					trip = <&cpu_warn1>;
+					cooling-device = <&CPU0 8 THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu-thermal2 {
@@ -205,18 +434,33 @@
 			thermal-sensors = <&tsens0 8>;
 
 			trips {
-				cpu_alert2: trip0 {
+				cpu_alert2: cpu_alert2 {
 					temperature = <75000>;
 					hysteresis = <2000>;
+					type = "active";
+				};
+				cpu_warn2: cpu_warn2 {
+					temperature = <90000>;
+					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit2: trip1 {
+				cpu_crit2: cpu_crit2 {
 					temperature = <110000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert2>;
+					cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+				};
+				map1 {
+					trip = <&cpu_warn2>;
+					cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		cpu-thermal3 {
@@ -226,9 +470,14 @@
 			thermal-sensors = <&tsens0 10>;
 
 			trips {
-				cpu_alert3: trip0 {
+				cpu_alert3: cpu_alert3 {
 					temperature = <75000>;
 					hysteresis = <2000>;
+					type = "active";
+				};
+				cpu_warn3: cpu_warn3 {
+					temperature = <90000>;
+					hysteresis = <2000>;
 					type = "passive";
 				};
 
@@ -238,6 +487,16 @@
 					type = "critical";
 				};
 			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert3>;
+					cooling-device = <&CPU2 THERMAL_NO_LIMIT 7>;
+				};
+				map1 {
+					trip = <&cpu_warn3>;
+					cooling-device = <&CPU2 8 THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 
@@ -414,7 +673,7 @@
 		};
 
 		kryocc: clock-controller at 6400000 {
-			compatible = "qcom,apcc-msm8996";
+			compatible = "qcom,msm8996-apcc";
 			reg = <0x6400000 0x90000>;
 			#clock-cells = <1>;
 		};
-- 
1.9.1

  parent reply	other threads:[~2018-03-29 21:26 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-29 21:26 [PATCH v4 00/14] CPU scaling support for msm8996 Ilia Lin
2018-03-29 21:26 ` Ilia Lin
2018-03-29 21:26 ` [PATCH v4 01/14] soc: qcom: Separate kryo l2 accessors from PMU driver Ilia Lin
2018-03-29 21:26   ` Ilia Lin
2018-03-31  4:39   ` kbuild test robot
2018-03-31  4:39     ` kbuild test robot
2018-03-31  4:39     ` kbuild test robot
2018-04-01 22:34   ` Bjorn Andersson
2018-04-01 22:34     ` Bjorn Andersson
2018-03-29 21:26 ` [PATCH v4 02/14] clk: qcom: Make clk_alpha_pll_configure available to modules Ilia Lin
2018-03-29 21:26   ` Ilia Lin
2018-03-29 21:26 ` [PATCH v4 03/14] clk: qcom: Add CPU clock driver for msm8996 Ilia Lin
2018-03-29 21:26   ` Ilia Lin
2018-03-29 21:26 ` [PATCH v4 04/14] clk: qcom: Add DT bindings for " Ilia Lin
2018-03-29 21:26   ` Ilia Lin
2018-04-05 13:18   ` Rob Herring
2018-04-05 13:18     ` Rob Herring
2018-03-29 21:26 ` [PATCH v4 05/14] clk: qcom: cpu-8996: Add support to switch to alternate PLL Ilia Lin
2018-03-29 21:26   ` Ilia Lin
2018-03-29 21:26 ` [PATCH v4 06/14] clk: qcom: cpu-8996: Add support to switch below 600Mhz Ilia Lin
2018-03-29 21:26   ` Ilia Lin
2018-03-29 21:26 ` [PATCH v4 07/14] clk: qcom: Add ACD path to CPU clock driver for msm8996 Ilia Lin
2018-03-29 21:26   ` Ilia Lin
2018-03-29 21:26 ` Ilia Lin [this message]
2018-03-29 21:26   ` [PATCH v4 08/14] dt: qcom: Add opp and thermal to the msm8996 Ilia Lin
2018-04-02  9:16   ` Viresh Kumar
2018-04-02  9:16     ` Viresh Kumar
2018-05-04  6:04     ` Viresh Kumar
2018-05-04  6:04       ` Viresh Kumar
2018-05-04  6:04       ` Viresh Kumar
2018-05-04  6:48       ` ilialin
2018-05-04  6:48         ` ilialin at codeaurora.org
2018-05-04  6:48         ` ilialin
2018-05-04  6:48         ` ilialin
2018-05-04  7:03         ` Viresh Kumar
2018-05-04  7:03           ` Viresh Kumar
2018-05-04  7:03           ` Viresh Kumar
2018-03-29 21:26 ` [PATCH v4 09/14] regulator: qcom_spmi: Add support for SAW Ilia Lin
2018-03-29 21:26   ` Ilia Lin
2018-03-29 21:26 ` [PATCH v4 10/14] dt-bindings: Add support for SAW documentation Ilia Lin
2018-03-29 21:26   ` Ilia Lin
2018-04-09 20:21   ` Rob Herring
2018-04-09 20:21     ` Rob Herring
2018-04-17 11:09     ` Mark Brown
2018-04-17 11:09       ` Mark Brown
2018-03-29 21:26 ` [PATCH v4 11/14] dt: qcom: Add SAW regulator for 8x96 CPUs Ilia Lin
2018-03-29 21:26   ` Ilia Lin
2018-03-29 21:26 ` [PATCH v4 12/14] cpufreq: Add Kryo CPU scaling driver Ilia Lin
2018-03-29 21:26   ` Ilia Lin
2018-04-02  9:26   ` Viresh Kumar
2018-04-02  9:26     ` Viresh Kumar
2018-04-02 14:56   ` Sricharan R
2018-04-02 14:56     ` Sricharan R
2018-03-29 21:26 ` [PATCH v4 13/14] dt-bindings: cpufreq: Document operating-points-v2-kryo-cpu Ilia Lin
2018-03-29 21:26   ` Ilia Lin
2018-04-02  9:30   ` Viresh Kumar
2018-04-02  9:30     ` Viresh Kumar
2018-04-02 15:07     ` Sricharan R
2018-04-02 15:07       ` Sricharan R
2018-04-03  2:41       ` Sricharan R
2018-04-03  2:41         ` Sricharan R
2018-04-03  4:23         ` Viresh Kumar
2018-04-03  4:23           ` Viresh Kumar
2018-04-03 16:39           ` Sricharan R
2018-04-03 16:39             ` Sricharan R
2018-03-29 21:26 ` [PATCH v4 14/14] dt: qcom: Add qcom-cpufreq-kryo driver configuration Ilia Lin
2018-03-29 21:26   ` Ilia Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1522358807-10413-9-git-send-email-ilialin@codeaurora.org \
    --to=ilialin@codeaurora.org \
    --cc=amit.kucheria@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=broonie@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=celster@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=nicolas.dechesne@linaro.org \
    --cc=rjw@rjwysocki.net \
    --cc=rnayak@codeaurora.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tfinkel@codeaurora.org \
    --cc=viresh.kumar@linaro.org \
    --cc=will.deacon@arm.com \
    --subject='Re: [PATCH v4 08/14] dt: qcom: Add opp and thermal to the msm8996' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.