From mboxrd@z Thu Jan 1 00:00:00 1970 From: Neil Armstrong Date: Wed, 11 Apr 2018 17:08:01 +0200 Subject: [U-Boot] [PATCH v3 u-boot 2/3] usb: host: dwc3: Add support for multiple PHYs In-Reply-To: <1523459282-12235-1-git-send-email-narmstrong@baylibre.com> References: <1523459282-12235-1-git-send-email-narmstrong@baylibre.com> Message-ID: <1523459282-12235-3-git-send-email-narmstrong@baylibre.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de DWC3 Ips can have more than 1 PHY for USB2 and 1 PHY for USB3, add support for a generic number of PHYs and adapt the code to handle a generic number of PHYs. Signed-off-by: Neil Armstrong --- drivers/usb/host/xhci-dwc3.c | 113 +++++++++++++++++++++++++------------------ 1 file changed, 66 insertions(+), 47 deletions(-) diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c index 1022dd5..c100735 100644 --- a/drivers/usb/host/xhci-dwc3.c +++ b/drivers/usb/host/xhci-dwc3.c @@ -22,8 +22,8 @@ DECLARE_GLOBAL_DATA_PTR; struct xhci_dwc3_platdata { - struct phy usb_phy; - struct phy usb3_phy; + struct phy *usb_phys; + int num_phys; }; void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode) @@ -113,45 +113,82 @@ void dwc3_set_fladj(struct dwc3 *dwc3_reg, u32 val) } #ifdef CONFIG_DM_USB -static int xhci_dwc3_setup_phy(struct udevice *dev, int index, struct phy *phy) +static int xhci_dwc3_setup_phy(struct udevice *dev, int count) { - int ret = 0; + struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); + int i, ret; + + if (!count) + return 0; - ret = generic_phy_get_by_index(dev, index, phy); - if (ret) { - if (ret != -ENOENT) { - pr_err("Failed to get USB PHY for %s\n", dev->name); + plat->usb_phys = devm_kcalloc(dev, count, sizeof(struct phy), + GFP_KERNEL); + if (!plat->usb_phys) + return -ENOMEM; + + for (i = 0; i < count; i++) { + ret = generic_phy_get_by_index(dev, i, &plat->usb_phys[i]); + if (ret && ret != -ENOENT) { + pr_err("Failed to get USB PHY%d for %s\n", + i, dev->name); return ret; } - } else { - ret = generic_phy_init(phy); + + ++plat->num_phys; + } + + for (i = 0; i < plat->num_phys; i++) { + ret = generic_phy_init(&plat->usb_phys[i]); if (ret) { - pr_err("Can't init USB PHY for %s\n", dev->name); - return ret; + pr_err("Can't init USB PHY%d for %s\n", + i, dev->name); + goto phys_init_err; } - ret = generic_phy_power_on(phy); + } + + for (i = 0; i < plat->num_phys; i++) { + ret = generic_phy_power_on(&plat->usb_phys[i]); if (ret) { - pr_err("Can't power on USB PHY for %s\n", dev->name); - generic_phy_exit(phy); - return ret; + pr_err("Can't power USB PHY%d for %s\n", + i, dev->name); + goto phys_poweron_err; } } return 0; + + +phys_poweron_err: + for (; i >= 0; i--) + generic_phy_power_off(&plat->usb_phys[i]); + + for (i = 0; i < plat->num_phys; i++) + generic_phy_exit(&plat->usb_phys[i]); + + return ret; + +phys_init_err: + for (; i >= 0; i--) + generic_phy_exit(&plat->usb_phys[i]); + + return ret; } -static int xhci_dwc3_shutdown_phy(struct phy *phy) +static int xhci_dwc3_shutdown_phy(struct udevice *dev) { - int ret = 0; + struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); + int i, ret; - if (generic_phy_valid(phy)) { - ret = generic_phy_power_off(phy); - if (ret) - return ret; + for (i = 0; i < plat->num_phys; i++) { + if (!generic_phy_valid(&plat->usb_phys[i])) + continue; - ret = generic_phy_exit(phy); - if (ret) - return ret; + ret = generic_phy_power_off(&plat->usb_phys[i]); + ret |= generic_phy_exit(&plat->usb_phys[i]); + if (ret) { + pr_err("Can't shutdown USB PHY%d for %s\n", + i, dev->name); + } } return 0; @@ -159,7 +196,6 @@ static int xhci_dwc3_shutdown_phy(struct phy *phy) static int xhci_dwc3_probe(struct udevice *dev) { - struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); struct xhci_hcor *hcor; struct xhci_hccr *hccr; struct dwc3 *dwc3_reg; @@ -170,18 +206,10 @@ static int xhci_dwc3_probe(struct udevice *dev) hcor = (struct xhci_hcor *)((uintptr_t)hccr + HC_LENGTH(xhci_readl(&(hccr)->cr_capbase))); - ret = xhci_dwc3_setup_phy(dev, 0, &plat->usb_phy); - if (ret) { - pr_err("Failed to setup USB PHY for %s\n", dev->name); + ret = xhci_dwc3_setup_phy(dev, dev_count_phandle_with_args( + dev, "phys", "#phy-cells")); + if (ret) return ret; - } - - ret = xhci_dwc3_setup_phy(dev, 1, &plat->usb3_phy); - if (ret) { - pr_err("Failed to setup USB3 PHY for %s\n", dev->name); - xhci_dwc3_shutdown_phy(&plat->usb_phy); - return ret; - } dwc3_reg = (struct dwc3 *)((char *)(hccr) + DWC3_REG_OFFSET); @@ -199,16 +227,7 @@ static int xhci_dwc3_probe(struct udevice *dev) static int xhci_dwc3_remove(struct udevice *dev) { - struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); - int ret; - - ret = xhci_dwc3_shutdown_phy(&plat->usb_phy); - if (ret) - pr_err("Can't shutdown USB PHY for %s\n", dev->name); - - ret = xhci_dwc3_shutdown_phy(&plat->usb3_phy); - if (ret) - pr_err("Can't shutdown USB3 PHY for %s\n", dev->name); + xhci_dwc3_shutdown_phy(dev); return xhci_deregister(dev); } -- 2.7.4 From mboxrd@z Thu Jan 1 00:00:00 1970 From: narmstrong@baylibre.com (Neil Armstrong) Date: Wed, 11 Apr 2018 17:08:01 +0200 Subject: [PATCH v3 u-boot 2/3] usb: host: dwc3: Add support for multiple PHYs In-Reply-To: <1523459282-12235-1-git-send-email-narmstrong@baylibre.com> References: <1523459282-12235-1-git-send-email-narmstrong@baylibre.com> Message-ID: <1523459282-12235-3-git-send-email-narmstrong@baylibre.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org DWC3 Ips can have more than 1 PHY for USB2 and 1 PHY for USB3, add support for a generic number of PHYs and adapt the code to handle a generic number of PHYs. Signed-off-by: Neil Armstrong --- drivers/usb/host/xhci-dwc3.c | 113 +++++++++++++++++++++++++------------------ 1 file changed, 66 insertions(+), 47 deletions(-) diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c index 1022dd5..c100735 100644 --- a/drivers/usb/host/xhci-dwc3.c +++ b/drivers/usb/host/xhci-dwc3.c @@ -22,8 +22,8 @@ DECLARE_GLOBAL_DATA_PTR; struct xhci_dwc3_platdata { - struct phy usb_phy; - struct phy usb3_phy; + struct phy *usb_phys; + int num_phys; }; void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode) @@ -113,45 +113,82 @@ void dwc3_set_fladj(struct dwc3 *dwc3_reg, u32 val) } #ifdef CONFIG_DM_USB -static int xhci_dwc3_setup_phy(struct udevice *dev, int index, struct phy *phy) +static int xhci_dwc3_setup_phy(struct udevice *dev, int count) { - int ret = 0; + struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); + int i, ret; + + if (!count) + return 0; - ret = generic_phy_get_by_index(dev, index, phy); - if (ret) { - if (ret != -ENOENT) { - pr_err("Failed to get USB PHY for %s\n", dev->name); + plat->usb_phys = devm_kcalloc(dev, count, sizeof(struct phy), + GFP_KERNEL); + if (!plat->usb_phys) + return -ENOMEM; + + for (i = 0; i < count; i++) { + ret = generic_phy_get_by_index(dev, i, &plat->usb_phys[i]); + if (ret && ret != -ENOENT) { + pr_err("Failed to get USB PHY%d for %s\n", + i, dev->name); return ret; } - } else { - ret = generic_phy_init(phy); + + ++plat->num_phys; + } + + for (i = 0; i < plat->num_phys; i++) { + ret = generic_phy_init(&plat->usb_phys[i]); if (ret) { - pr_err("Can't init USB PHY for %s\n", dev->name); - return ret; + pr_err("Can't init USB PHY%d for %s\n", + i, dev->name); + goto phys_init_err; } - ret = generic_phy_power_on(phy); + } + + for (i = 0; i < plat->num_phys; i++) { + ret = generic_phy_power_on(&plat->usb_phys[i]); if (ret) { - pr_err("Can't power on USB PHY for %s\n", dev->name); - generic_phy_exit(phy); - return ret; + pr_err("Can't power USB PHY%d for %s\n", + i, dev->name); + goto phys_poweron_err; } } return 0; + + +phys_poweron_err: + for (; i >= 0; i--) + generic_phy_power_off(&plat->usb_phys[i]); + + for (i = 0; i < plat->num_phys; i++) + generic_phy_exit(&plat->usb_phys[i]); + + return ret; + +phys_init_err: + for (; i >= 0; i--) + generic_phy_exit(&plat->usb_phys[i]); + + return ret; } -static int xhci_dwc3_shutdown_phy(struct phy *phy) +static int xhci_dwc3_shutdown_phy(struct udevice *dev) { - int ret = 0; + struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); + int i, ret; - if (generic_phy_valid(phy)) { - ret = generic_phy_power_off(phy); - if (ret) - return ret; + for (i = 0; i < plat->num_phys; i++) { + if (!generic_phy_valid(&plat->usb_phys[i])) + continue; - ret = generic_phy_exit(phy); - if (ret) - return ret; + ret = generic_phy_power_off(&plat->usb_phys[i]); + ret |= generic_phy_exit(&plat->usb_phys[i]); + if (ret) { + pr_err("Can't shutdown USB PHY%d for %s\n", + i, dev->name); + } } return 0; @@ -159,7 +196,6 @@ static int xhci_dwc3_shutdown_phy(struct phy *phy) static int xhci_dwc3_probe(struct udevice *dev) { - struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); struct xhci_hcor *hcor; struct xhci_hccr *hccr; struct dwc3 *dwc3_reg; @@ -170,18 +206,10 @@ static int xhci_dwc3_probe(struct udevice *dev) hcor = (struct xhci_hcor *)((uintptr_t)hccr + HC_LENGTH(xhci_readl(&(hccr)->cr_capbase))); - ret = xhci_dwc3_setup_phy(dev, 0, &plat->usb_phy); - if (ret) { - pr_err("Failed to setup USB PHY for %s\n", dev->name); + ret = xhci_dwc3_setup_phy(dev, dev_count_phandle_with_args( + dev, "phys", "#phy-cells")); + if (ret) return ret; - } - - ret = xhci_dwc3_setup_phy(dev, 1, &plat->usb3_phy); - if (ret) { - pr_err("Failed to setup USB3 PHY for %s\n", dev->name); - xhci_dwc3_shutdown_phy(&plat->usb_phy); - return ret; - } dwc3_reg = (struct dwc3 *)((char *)(hccr) + DWC3_REG_OFFSET); @@ -199,16 +227,7 @@ static int xhci_dwc3_probe(struct udevice *dev) static int xhci_dwc3_remove(struct udevice *dev) { - struct xhci_dwc3_platdata *plat = dev_get_platdata(dev); - int ret; - - ret = xhci_dwc3_shutdown_phy(&plat->usb_phy); - if (ret) - pr_err("Can't shutdown USB PHY for %s\n", dev->name); - - ret = xhci_dwc3_shutdown_phy(&plat->usb3_phy); - if (ret) - pr_err("Can't shutdown USB3 PHY for %s\n", dev->name); + xhci_dwc3_shutdown_phy(dev); return xhci_deregister(dev); } -- 2.7.4