[PATCH v2 03/10] wil6210: align to latest auto generated wmi.h

[Maya Erez <merez@codeaurora.org>]

From: Ahmad Masri <amasri@codeaurora.org>

Align to latest version of the auto generated wmi file
describing the interface with FW

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/wmi.c |   6 +-
 drivers/net/wireless/ath/wil6210/wmi.h | 387 +++++++++++++++++++++++++++++++--
 2 files changed, 371 insertions(+), 22 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 062ead3..9f2c21b 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -1564,7 +1564,9 @@ int wmi_pcp_start(struct wil6210_vif *vif,
 		.pcp_max_assoc_sta = max_assoc_sta,
 		.hidden_ssid = hidden_ssid,
 		.is_go = is_go,
-		.disable_ap_sme = disable_ap_sme,
+		.ap_sme_offload_mode = disable_ap_sme ?
+				       WMI_AP_SME_OFFLOAD_PARTIAL :
+				       WMI_AP_SME_OFFLOAD_FULL,
 		.abft_len = wil->abft_len,
 	};
 	struct {
@@ -1593,7 +1595,7 @@ int wmi_pcp_start(struct wil6210_vif *vif,
 	}
 
 	if (disable_ap_sme &&
-	    !test_bit(WMI_FW_CAPABILITY_DISABLE_AP_SME,
+	    !test_bit(WMI_FW_CAPABILITY_AP_SME_OFFLOAD_PARTIAL,
 		      wil->fw_capabilities)) {
 		wil_err(wil, "disable_ap_sme not supported by FW\n");
 		return -EOPNOTSUPP;
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index ecd4b44..92f63c5 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -1,4 +1,5 @@
 /*
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
  * Copyright (c) 2012-2017 Qualcomm Atheros, Inc.
  * Copyright (c) 2006-2012 Wilocity
  *
@@ -29,8 +30,6 @@
 #ifndef __WILOCITY_WMI_H__
 #define __WILOCITY_WMI_H__
 
-/* General */
-#define WMI_MAX_ASSOC_STA		(8)
 #define WMI_DEFAULT_ASSOC_STA		(1)
 #define WMI_MAC_LEN			(6)
 #define WMI_PROX_RANGE_NUM		(3)
@@ -41,6 +40,19 @@
 #define WMI_RF_ETYPE_LENGTH		(3)
 #define WMI_RF_RX2TX_LENGTH		(3)
 #define WMI_RF_ETYPE_VAL_PER_RANGE	(5)
+/* DTYPE configuration array size
+ * must always be kept equal to (WMI_RF_DTYPE_LENGTH+1)
+ */
+#define WMI_RF_DTYPE_CONF_LENGTH	(4)
+/* ETYPE configuration array size
+ * must always be kept equal to
+ * (WMI_RF_ETYPE_LENGTH+WMI_RF_ETYPE_VAL_PER_RANGE)
+ */
+#define WMI_RF_ETYPE_CONF_LENGTH	(8)
+/* RX2TX configuration array size
+ * must always be kept equal to (WMI_RF_RX2TX_LENGTH+1)
+ */
+#define WMI_RF_RX2TX_CONF_LENGTH	(4)
 
 /* Mailbox interface
  * used for commands and events
@@ -61,7 +73,7 @@ enum wmi_fw_capability {
 	WMI_FW_CAPABILITY_PS_CONFIG			= 1,
 	WMI_FW_CAPABILITY_RF_SECTORS			= 2,
 	WMI_FW_CAPABILITY_MGMT_RETRY_LIMIT		= 3,
-	WMI_FW_CAPABILITY_DISABLE_AP_SME		= 4,
+	WMI_FW_CAPABILITY_AP_SME_OFFLOAD_PARTIAL	= 4,
 	WMI_FW_CAPABILITY_WMI_ONLY			= 5,
 	WMI_FW_CAPABILITY_THERMAL_THROTTLING		= 7,
 	WMI_FW_CAPABILITY_D3_SUSPEND			= 8,
@@ -74,6 +86,7 @@ enum wmi_fw_capability {
 	WMI_FW_CAPABILITY_PNO				= 15,
 	WMI_FW_CAPABILITY_CHANNEL_BONDING		= 17,
 	WMI_FW_CAPABILITY_REF_CLOCK_CONTROL		= 18,
+	WMI_FW_CAPABILITY_AP_SME_OFFLOAD_NONE		= 19,
 	WMI_FW_CAPABILITY_MAX,
 };
 
@@ -165,12 +178,14 @@ enum wmi_command_id {
 	WMI_SET_ACTIVE_SILENT_RSSI_TABLE_CMDID		= 0x85C,
 	WMI_RF_PWR_ON_DELAY_CMDID			= 0x85D,
 	WMI_SET_HIGH_POWER_TABLE_PARAMS_CMDID		= 0x85E,
+	WMI_FIXED_SCHEDULING_UL_CONFIG_CMDID		= 0x85F,
 	/* Performance monitoring commands */
 	WMI_BF_CTRL_CMDID				= 0x862,
 	WMI_NOTIFY_REQ_CMDID				= 0x863,
 	WMI_GET_STATUS_CMDID				= 0x864,
 	WMI_GET_RF_STATUS_CMDID				= 0x866,
 	WMI_GET_BASEBAND_TYPE_CMDID			= 0x867,
+	WMI_VRING_SWITCH_TIMING_CONFIG_CMDID		= 0x868,
 	WMI_UNIT_TEST_CMDID				= 0x900,
 	WMI_FLASH_READ_CMDID				= 0x902,
 	WMI_FLASH_WRITE_CMDID				= 0x903,
@@ -203,6 +218,7 @@ enum wmi_command_id {
 	WMI_GET_THERMAL_THROTTLING_CFG_CMDID		= 0x941,
 	/* Read Power Save profile type */
 	WMI_PS_DEV_PROFILE_CFG_READ_CMDID		= 0x942,
+	WMI_TSF_SYNC_CMDID				= 0x973,
 	WMI_TOF_SESSION_START_CMDID			= 0x991,
 	WMI_TOF_GET_CAPABILITIES_CMDID			= 0x992,
 	WMI_TOF_SET_LCR_CMDID				= 0x993,
@@ -219,11 +235,16 @@ enum wmi_command_id {
 	WMI_PRIO_TX_SECTORS_ORDER_CMDID			= 0x9A5,
 	WMI_PRIO_TX_SECTORS_NUMBER_CMDID		= 0x9A6,
 	WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_CMDID	= 0x9A7,
+	WMI_BF_CONTROL_CMDID				= 0x9AA,
 	WMI_SCHEDULING_SCHEME_CMDID			= 0xA01,
 	WMI_FIXED_SCHEDULING_CONFIG_CMDID		= 0xA02,
 	WMI_ENABLE_FIXED_SCHEDULING_CMDID		= 0xA03,
 	WMI_SET_MULTI_DIRECTED_OMNIS_CONFIG_CMDID	= 0xA04,
 	WMI_SET_LONG_RANGE_CONFIG_CMDID			= 0xA05,
+	WMI_GET_ASSOC_LIST_CMDID			= 0xA06,
+	WMI_GET_CCA_INDICATIONS_CMDID			= 0xA07,
+	WMI_SET_CCA_INDICATIONS_BI_AVG_NUM_CMDID	= 0xA08,
+	WMI_INTERNAL_FW_IOCTL_CMDID			= 0xA0B,
 	WMI_SET_MAC_ADDRESS_CMDID			= 0xF003,
 	WMI_ABORT_SCAN_CMDID				= 0xF007,
 	WMI_SET_PROMISCUOUS_MODE_CMDID			= 0xF041,
@@ -502,6 +523,18 @@ enum wmi_rf_mgmt_type {
 	WMI_RF_MGMT_GET_STATUS	= 0x02,
 };
 
+/* WMI_BF_CONTROL_CMDID */
+enum wmi_bf_triggers {
+	WMI_BF_TRIGGER_RS_MCS1_TH_FAILURE		= 0x01,
+	WMI_BF_TRIGGER_RS_MCS1_NO_BACK_FAILURE		= 0x02,
+	WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_TXOP		= 0x04,
+	WMI_BF_TRIGGER_MAX_BACK_FAILURE			= 0x08,
+	WMI_BF_TRIGGER_FW				= 0x10,
+	WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_KEEP_ALIVE	= 0x20,
+	WMI_BF_TRIGGER_AOA				= 0x40,
+	WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_UPM		= 0x80,
+};
+
 /* WMI_RF_MGMT_CMDID */
 struct wmi_rf_mgmt_cmd {
 	__le32 rf_mgmt_type;
@@ -537,7 +570,9 @@ struct wmi_bcon_ctrl_cmd {
 	u8 disable_sec;
 	u8 hidden_ssid;
 	u8 is_go;
-	u8 reserved[2];
+	/* A-BFT length override if non-0 */
+	u8 abft_len;
+	u8 reserved;
 } __packed;
 
 /* WMI_PORT_ALLOCATE_CMDID */
@@ -603,6 +638,16 @@ struct wmi_power_mgmt_cfg_cmd {
 } __packed;
 
 /* WMI_PCP_START_CMDID */
+enum wmi_ap_sme_offload_mode {
+	/* Full AP SME in FW */
+	WMI_AP_SME_OFFLOAD_FULL		= 0x00,
+	/* Probe AP SME in FW */
+	WMI_AP_SME_OFFLOAD_PARTIAL	= 0x01,
+	/* AP SME in host */
+	WMI_AP_SME_OFFLOAD_NONE		= 0x02,
+};
+
+/* WMI_PCP_START_CMDID */
 struct wmi_pcp_start_cmd {
 	__le16 bcon_interval;
 	u8 pcp_max_assoc_sta;
@@ -613,7 +658,8 @@ struct wmi_pcp_start_cmd {
 	u8 reserved[4];
 	/* A-BFT length override if non-0 */
 	u8 abft_len;
-	u8 disable_ap_sme;
+	/* enum wmi_ap_sme_offload_mode_e */
+	u8 ap_sme_offload_mode;
 	u8 network_type;
 	/* enum wmi_channel WMI_CHANNEL_1..WMI_CHANNEL_6; for EDMG this is
 	 * the primary channel number
@@ -630,6 +676,17 @@ struct wmi_sw_tx_req_cmd {
 	u8 payload[0];
 } __packed;
 
+/* WMI_VRING_SWITCH_TIMING_CONFIG_CMDID */
+struct wmi_vring_switch_timing_config_cmd {
+	/* Set vring timing configuration:
+	 *
+	 * defined interval for vring switch
+	 */
+	__le32 interval_usec;
+	/* vring inactivity threshold */
+	__le32 idle_th_usec;
+} __packed;
+
 struct wmi_sw_ring_cfg {
 	__le64 ring_mem_base;
 	__le16 ring_size;
@@ -665,6 +722,7 @@ enum wmi_vring_cfg_schd_params_priority {
 	WMI_SCH_PRIO_HIGH	= 0x01,
 };
 
+#define CIDXTID_EXTENDED_CID_TID		(0xFF)
 #define CIDXTID_CID_POS				(0)
 #define CIDXTID_CID_LEN				(4)
 #define CIDXTID_CID_MSK				(0xF)
@@ -685,6 +743,9 @@ struct wmi_vring_cfg {
 	struct wmi_sw_ring_cfg tx_sw_ring;
 	/* 0-23 vrings */
 	u8 ringid;
+	/* Used for cid less than 8. For higher cid set
+	 * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead
+	 */
 	u8 cidxtid;
 	u8 encap_trans_type;
 	/* 802.3 DS cfg */
@@ -694,6 +755,11 @@ struct wmi_vring_cfg {
 	u8 to_resolution;
 	u8 agg_max_wsize;
 	struct wmi_vring_cfg_schd schd_params;
+	/* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
+	u8 cid;
+	/* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
+	u8 tid;
+	u8 reserved[2];
 } __packed;
 
 enum wmi_vring_cfg_cmd_action {
@@ -891,23 +957,42 @@ struct wmi_cfg_rx_chain_cmd {
 
 /* WMI_RCP_ADDBA_RESP_CMDID */
 struct wmi_rcp_addba_resp_cmd {
+	/* Used for cid less than 8. For higher cid set
+	 * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead
+	 */
 	u8 cidxtid;
 	u8 dialog_token;
 	__le16 status_code;
 	/* ieee80211_ba_parameterset field to send */
 	__le16 ba_param_set;
 	__le16 ba_timeout;
+	/* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
+	u8 cid;
+	/* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
+	u8 tid;
+	u8 reserved[2];
 } __packed;
 
 /* WMI_RCP_DELBA_CMDID */
 struct wmi_rcp_delba_cmd {
+	/* Used for cid less than 8. For higher cid set
+	 * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead
+	 */
 	u8 cidxtid;
 	u8 reserved;
 	__le16 reason;
+	/* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
+	u8 cid;
+	/* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
+	u8 tid;
+	u8 reserved2[2];
 } __packed;
 
 /* WMI_RCP_ADDBA_REQ_CMDID */
 struct wmi_rcp_addba_req_cmd {
+	/* Used for cid less than 8. For higher cid set
+	 * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead
+	 */
 	u8 cidxtid;
 	u8 dialog_token;
 	/* ieee80211_ba_parameterset field as it received */
@@ -915,6 +1000,11 @@ struct wmi_rcp_addba_req_cmd {
 	__le16 ba_timeout;
 	/* ieee80211_ba_seqstrl field as it received */
 	__le16 ba_seq_ctrl;
+	/* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
+	u8 cid;
+	/* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
+	u8 tid;
+	u8 reserved[2];
 } __packed;
 
 /* WMI_SET_MAC_ADDRESS_CMDID */
@@ -925,15 +1015,20 @@ struct wmi_set_mac_address_cmd {
 
 /* WMI_ECHO_CMDID
  * Check FW is alive
- * WMI_DEEP_ECHO_CMDID
- * Check FW and ucode are alive
  * Returned event: WMI_ECHO_RSP_EVENTID
- * same event for both commands
  */
 struct wmi_echo_cmd {
 	__le32 value;
 } __packed;
 
+/* WMI_DEEP_ECHO_CMDID
+ * Check FW and ucode are alive
+ * Returned event: WMI_ECHO_RSP_EVENTID
+ */
+struct wmi_deep_echo_cmd {
+	__le32 value;
+} __packed;
+
 /* WMI_RF_PWR_ON_DELAY_CMDID
  * set FW time parameters used through RF resetting
  *  RF reset consists of bringing its power down for a period of time, then
@@ -951,7 +1046,7 @@ struct wmi_rf_pwr_on_delay_cmd {
 	__le16 up_delay_usec;
 } __packed;
 
-/* \WMI_SET_HIGH_POWER_TABLE_PARAMS_CMDID
+/* WMI_SET_HIGH_POWER_TABLE_PARAMS_CMDID
  * This API controls the Tx and Rx gain over temperature.
  * It controls the Tx D-type, Rx D-type and Rx E-type amplifiers.
  * It also controls the Tx gain index, by controlling the Rx to Tx gain index
@@ -965,25 +1060,46 @@ struct wmi_set_high_power_table_params_cmd {
 	u8 tx_dtype_temp[WMI_RF_DTYPE_LENGTH];
 	u8 reserved0;
 	/* Tx D-type values to be used for each temperature range */
-	__le32 tx_dtype_conf[WMI_RF_DTYPE_LENGTH + 1];
+	__le32 tx_dtype_conf[WMI_RF_DTYPE_CONF_LENGTH];
+	/* Temperature range for Tx E-type parameters */
+	u8 tx_etype_temp[WMI_RF_ETYPE_LENGTH];
+	u8 reserved1;
+	/* Tx E-type values to be used for each temperature range.
+	 * The last 4 values of any range are the first 4 values of the next
+	 * range and so on
+	 */
+	__le32 tx_etype_conf[WMI_RF_ETYPE_CONF_LENGTH];
 	/* Temperature range for Rx D-type parameters */
 	u8 rx_dtype_temp[WMI_RF_DTYPE_LENGTH];
-	u8 reserved1;
+	u8 reserved2;
 	/* Rx D-type values to be used for each temperature range */
-	__le32 rx_dtype_conf[WMI_RF_DTYPE_LENGTH + 1];
+	__le32 rx_dtype_conf[WMI_RF_DTYPE_CONF_LENGTH];
 	/* Temperature range for Rx E-type parameters */
 	u8 rx_etype_temp[WMI_RF_ETYPE_LENGTH];
-	u8 reserved2;
+	u8 reserved3;
 	/* Rx E-type values to be used for each temperature range.
 	 * The last 4 values of any range are the first 4 values of the next
 	 * range and so on
 	 */
-	__le32 rx_etype_conf[WMI_RF_ETYPE_VAL_PER_RANGE + WMI_RF_ETYPE_LENGTH];
+	__le32 rx_etype_conf[WMI_RF_ETYPE_CONF_LENGTH];
 	/* Temperature range for rx_2_tx_offs parameters */
 	u8 rx_2_tx_temp[WMI_RF_RX2TX_LENGTH];
-	u8 reserved3;
+	u8 reserved4;
 	/* Rx to Tx gain index offset */
-	s8 rx_2_tx_offs[WMI_RF_RX2TX_LENGTH + 1];
+	s8 rx_2_tx_offs[WMI_RF_RX2TX_CONF_LENGTH];
+} __packed;
+
+/* WMI_FIXED_SCHEDULING_UL_CONFIG_CMDID
+ * This API sets rd parameter per mcs.
+ * Relevant only in Fixed Scheduling mode.
+ * Returned event: WMI_FIXED_SCHEDULING_UL_CONFIG_EVENTID
+ */
+struct wmi_fixed_scheduling_ul_config_cmd {
+	/* Use mcs -1 to set for every mcs */
+	s8 mcs;
+	/* Number of frames with rd bit set in a single virtual slot */
+	u8 rd_count_per_slot;
+	u8 reserved[2];
 } __packed;
 
 /* CMD: WMI_RF_XPM_READ_CMDID */
@@ -1290,6 +1406,93 @@ struct wmi_set_long_range_config_complete_event {
 	u8 reserved[3];
 } __packed;
 
+/* payload max size is 236 bytes: max event buffer size (256) - WMI headers
+ * (16) - prev struct field size (4)
+ */
+#define WMI_MAX_IOCTL_PAYLOAD_SIZE		(236)
+#define WMI_MAX_IOCTL_REPLY_PAYLOAD_SIZE	(236)
+#define WMI_MAX_INTERNAL_EVENT_PAYLOAD_SIZE	(236)
+
+enum wmi_internal_fw_ioctl_code {
+	WMI_INTERNAL_FW_CODE_NONE	= 0x0,
+	WMI_INTERNAL_FW_CODE_QCOM	= 0x1,
+};
+
+/* WMI_INTERNAL_FW_IOCTL_CMDID */
+struct wmi_internal_fw_ioctl_cmd {
+	/* enum wmi_internal_fw_ioctl_code */
+	__le16 code;
+	__le16 length;
+	/* payload max size is WMI_MAX_IOCTL_PAYLOAD_SIZE
+	 * Must be the last member of the struct
+	 */
+	__le32 payload[0];
+} __packed;
+
+/* WMI_INTERNAL_FW_IOCTL_EVENTID */
+struct wmi_internal_fw_ioctl_event {
+	/* wmi_fw_status */
+	u8 status;
+	u8 reserved;
+	__le16 length;
+	/* payload max size is WMI_MAX_IOCTL_REPLY_PAYLOAD_SIZE
+	 * Must be the last member of the struct
+	 */
+	__le32 payload[0];
+} __packed;
+
+/* WMI_INTERNAL_FW_EVENT_EVENTID */
+struct wmi_internal_fw_event_event {
+	__le16 id;
+	__le16 length;
+	/* payload max size is WMI_MAX_INTERNAL_EVENT_PAYLOAD_SIZE
+	 * Must be the last member of the struct
+	 */
+	__le32 payload[0];
+} __packed;
+
+/* WMI_BF_CONTROL_CMDID */
+struct wmi_bf_control_cmd {
+	/* wmi_bf_triggers */
+	__le32 triggers;
+	u8 cid;
+	/* DISABLED = 0, ENABLED = 1 , DRY_RUN = 2 */
+	u8 txss_mode;
+	/* DISABLED = 0, ENABLED = 1, DRY_RUN = 2 */
+	u8 brp_mode;
+	/* Max cts threshold (correspond to
+	 * WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_TXOP)
+	 */
+	u8 bf_trigger_max_cts_failure_thr;
+	/* Max cts threshold in dense (correspond to
+	 * WMI_BF_TRIGGER_MAX_CTS_FAILURE_IN_TXOP)
+	 */
+	u8 bf_trigger_max_cts_failure_dense_thr;
+	/* Max b-ack threshold (correspond to
+	 * WMI_BF_TRIGGER_MAX_BACK_FAILURE)
+	 */
+	u8 bf_trigger_max_back_failure_thr;
+	/* Max b-ack threshold in dense (correspond to
+	 * WMI_BF_TRIGGER_MAX_BACK_FAILURE)
+	 */
+	u8 bf_trigger_max_back_failure_dense_thr;
+	u8 reserved0;
+	/* Wrong sectors threshold */
+	__le32 wrong_sector_bis_thr;
+	/* BOOL to enable/disable long term trigger */
+	u8 long_term_enable;
+	/* 1 = Update long term thresholds from the long_term_mbps_th_tbl and
+	 * long_term_trig_timeout_per_mcs arrays, 0 = Ignore
+	 */
+	u8 long_term_update_thr;
+	/* Long term throughput threshold [Mbps] */
+	u8 long_term_mbps_th_tbl[WMI_NUM_MCS];
+	u8 reserved1;
+	/* Long term timeout threshold table [msec] */
+	__le16 long_term_trig_timeout_per_mcs[WMI_NUM_MCS];
+	u8 reserved2[2];
+} __packed;
+
 /* WMI Events
  * List of Events (target to host)
  */
@@ -1348,6 +1551,7 @@ enum wmi_event_id {
 	WMI_SET_SILENT_RSSI_TABLE_DONE_EVENTID		= 0x185C,
 	WMI_RF_PWR_ON_DELAY_RSP_EVENTID			= 0x185D,
 	WMI_SET_HIGH_POWER_TABLE_PARAMS_EVENTID		= 0x185E,
+	WMI_FIXED_SCHEDULING_UL_CONFIG_EVENTID		= 0x185F,
 	/* Performance monitoring events */
 	WMI_DATA_PORT_OPEN_EVENTID			= 0x1860,
 	WMI_WBE_LINK_DOWN_EVENTID			= 0x1861,
@@ -1357,6 +1561,7 @@ enum wmi_event_id {
 	WMI_VRING_EN_EVENTID				= 0x1865,
 	WMI_GET_RF_STATUS_EVENTID			= 0x1866,
 	WMI_GET_BASEBAND_TYPE_EVENTID			= 0x1867,
+	WMI_VRING_SWITCH_TIMING_CONFIG_EVENTID		= 0x1868,
 	WMI_UNIT_TEST_EVENTID				= 0x1900,
 	WMI_FLASH_READ_DONE_EVENTID			= 0x1902,
 	WMI_FLASH_WRITE_DONE_EVENTID			= 0x1903,
@@ -1386,6 +1591,7 @@ enum wmi_event_id {
 	WMI_GET_THERMAL_THROTTLING_CFG_EVENTID		= 0x1941,
 	/* return the Power Save profile */
 	WMI_PS_DEV_PROFILE_CFG_READ_EVENTID		= 0x1942,
+	WMI_TSF_SYNC_STATUS_EVENTID			= 0x1973,
 	WMI_TOF_SESSION_END_EVENTID			= 0x1991,
 	WMI_TOF_GET_CAPABILITIES_EVENTID		= 0x1992,
 	WMI_TOF_SET_LCR_EVENTID				= 0x1993,
@@ -1403,17 +1609,24 @@ enum wmi_event_id {
 	WMI_PRIO_TX_SECTORS_ORDER_EVENTID		= 0x19A5,
 	WMI_PRIO_TX_SECTORS_NUMBER_EVENTID		= 0x19A6,
 	WMI_PRIO_TX_SECTORS_SET_DEFAULT_CFG_EVENTID	= 0x19A7,
+	WMI_BF_CONTROL_EVENTID				= 0x19AA,
 	WMI_SCHEDULING_SCHEME_EVENTID			= 0x1A01,
 	WMI_FIXED_SCHEDULING_CONFIG_COMPLETE_EVENTID	= 0x1A02,
 	WMI_ENABLE_FIXED_SCHEDULING_COMPLETE_EVENTID	= 0x1A03,
 	WMI_SET_MULTI_DIRECTED_OMNIS_CONFIG_EVENTID	= 0x1A04,
 	WMI_SET_LONG_RANGE_CONFIG_COMPLETE_EVENTID	= 0x1A05,
+	WMI_GET_ASSOC_LIST_RES_EVENTID			= 0x1A06,
+	WMI_GET_CCA_INDICATIONS_EVENTID			= 0x1A07,
+	WMI_SET_CCA_INDICATIONS_BI_AVG_NUM_EVENTID	= 0x1A08,
+	WMI_INTERNAL_FW_EVENT_EVENTID			= 0x1A0A,
+	WMI_INTERNAL_FW_IOCTL_EVENTID			= 0x1A0B,
 	WMI_SET_CHANNEL_EVENTID				= 0x9000,
 	WMI_ASSOC_REQ_EVENTID				= 0x9001,
 	WMI_EAPOL_RX_EVENTID				= 0x9002,
 	WMI_MAC_ADDR_RESP_EVENTID			= 0x9003,
 	WMI_FW_VER_EVENTID				= 0x9004,
 	WMI_ACS_PASSIVE_SCAN_COMPLETE_EVENTID		= 0x9005,
+	WMI_INTERNAL_FW_SET_CHANNEL			= 0x9006,
 	WMI_COMMAND_NOT_SUPPORTED_EVENTID		= 0xFFFF,
 };
 
@@ -1485,12 +1698,16 @@ enum rf_type {
 	RF_UNKNOWN	= 0x00,
 	RF_MARLON	= 0x01,
 	RF_SPARROW	= 0x02,
+	RF_TALYNA1	= 0x03,
+	RF_TALYNA2	= 0x04,
 };
 
 /* WMI_GET_RF_STATUS_EVENTID */
 enum board_file_rf_type {
 	BF_RF_MARLON	= 0x00,
 	BF_RF_SPARROW	= 0x01,
+	BF_RF_TALYNA1	= 0x02,
+	BF_RF_TALYNA2	= 0x03,
 };
 
 /* WMI_GET_RF_STATUS_EVENTID */
@@ -1530,6 +1747,7 @@ enum baseband_type {
 	BASEBAND_SPARROW_M_C0	= 0x06,
 	BASEBAND_SPARROW_M_D0	= 0x07,
 	BASEBAND_TALYN_M_A0	= 0x08,
+	BASEBAND_TALYN_M_B0	= 0x09,
 };
 
 /* WMI_GET_BASEBAND_TYPE_EVENTID */
@@ -1574,7 +1792,11 @@ struct wmi_ready_event {
 	u8 numof_additional_mids;
 	/* rfc read calibration result. 5..15 */
 	u8 rfc_read_calib_result;
-	u8 reserved[3];
+	/* Max associated STAs supported by FW in AP mode (default 0 means 8
+	 * STA)
+	 */
+	u8 max_assoc_sta;
+	u8 reserved[2];
 } __packed;
 
 /* WMI_NOTIFY_REQ_DONE_EVENTID */
@@ -1693,13 +1915,13 @@ enum wmi_pno_result {
 };
 
 struct wmi_start_sched_scan_event {
-	/* pno_result */
+	/* wmi_pno_result */
 	u8 result;
 	u8 reserved[3];
 } __packed;
 
 struct wmi_stop_sched_scan_event {
-	/* pno_result */
+	/* wmi_pno_result */
 	u8 result;
 	u8 reserved[3];
 } __packed;
@@ -1766,9 +1988,17 @@ struct wmi_ba_status_event {
 
 /* WMI_DELBA_EVENTID */
 struct wmi_delba_event {
+	/* Used for cid less than 8. For higher cid set
+	 * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead
+	 */
 	u8 cidxtid;
 	u8 from_initiator;
 	__le16 reason;
+	/* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
+	u8 cid;
+	/* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
+	u8 tid;
+	u8 reserved[2];
 } __packed;
 
 /* WMI_VRING_CFG_DONE_EVENTID */
@@ -1781,13 +2011,24 @@ struct wmi_vring_cfg_done_event {
 
 /* WMI_RCP_ADDBA_RESP_SENT_EVENTID */
 struct wmi_rcp_addba_resp_sent_event {
+	/* Used for cid less than 8. For higher cid set
+	 * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead
+	 */
 	u8 cidxtid;
 	u8 reserved;
 	__le16 status;
+	/* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
+	u8 cid;
+	/* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
+	u8 tid;
+	u8 reserved2[2];
 } __packed;
 
 /* WMI_RCP_ADDBA_REQ_EVENTID */
 struct wmi_rcp_addba_req_event {
+	/* Used for cid less than 8. For higher cid set
+	 * CIDXTID_EXTENDED_CID_TID here and use cid and tid members instead
+	 */
 	u8 cidxtid;
 	u8 dialog_token;
 	/* ieee80211_ba_parameterset as it received */
@@ -1795,6 +2036,11 @@ struct wmi_rcp_addba_req_event {
 	__le16 ba_timeout;
 	/* ieee80211_ba_seqstrl field as it received */
 	__le16 ba_seq_ctrl;
+	/* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
+	u8 cid;
+	/* Used when cidxtid = CIDXTID_EXTENDED_CID_TID */
+	u8 tid;
+	u8 reserved[2];
 } __packed;
 
 /* WMI_CFG_RX_CHAIN_DONE_EVENTID */
@@ -1969,6 +2215,13 @@ struct wmi_set_high_power_table_params_event {
 	u8 reserved[3];
 } __packed;
 
+/* WMI_FIXED_SCHEDULING_UL_CONFIG_EVENTID */
+struct wmi_fixed_scheduling_ul_config_event {
+	/* wmi_fw_status */
+	u8 status;
+	u8 reserved[3];
+} __packed;
+
 /* WMI_TEMP_SENSE_DONE_EVENTID
  *
  * Measure MAC and radio temperatures
@@ -2317,6 +2570,8 @@ struct wmi_link_maintain_cfg {
 	__le32 bad_beacons_num_threshold;
 	/* SNR limit for bad_beacons_detector */
 	__le32 bad_beacons_snr_threshold_db;
+	/* timeout for disassoc response frame in uSec */
+	__le32 disconnect_timeout;
 } __packed;
 
 /* WMI_LINK_MAINTAIN_CFG_WRITE_CMDID */
@@ -2546,6 +2801,7 @@ enum wmi_tof_session_end_status {
 	WMI_TOF_SESSION_END_FAIL		= 0x01,
 	WMI_TOF_SESSION_END_PARAMS_ERROR	= 0x02,
 	WMI_TOF_SESSION_END_ABORTED		= 0x03,
+	WMI_TOF_SESSION_END_BUSY		= 0x04,
 };
 
 /* WMI_TOF_SESSION_END_EVENTID */
@@ -2952,7 +3208,40 @@ struct wmi_set_silent_rssi_table_done_event {
 	__le32 table;
 } __packed;
 
-/* \WMI_COMMAND_NOT_SUPPORTED_EVENTID */
+/* WMI_VRING_SWITCH_TIMING_CONFIG_EVENTID */
+struct wmi_vring_switch_timing_config_event {
+	/* enum wmi_fw_status */
+	u8 status;
+	u8 reserved[3];
+} __packed;
+
+/* WMI_GET_ASSOC_LIST_RES_EVENTID */
+struct wmi_assoc_sta_info {
+	u8 mac[WMI_MAC_LEN];
+	u8 omni_index_address;
+	u8 reserved;
+} __packed;
+
+#define WMI_GET_ASSOC_LIST_SIZE	(8)
+
+/* WMI_GET_ASSOC_LIST_RES_EVENTID
+ * Returns up to MAX_ASSOC_STA_LIST_SIZE associated STAs
+ */
+struct wmi_get_assoc_list_res_event {
+	struct wmi_assoc_sta_info assoc_sta_list[WMI_GET_ASSOC_LIST_SIZE];
+	/* STA count */
+	u8 count;
+	u8 reserved[3];
+} __packed;
+
+/* WMI_BF_CONTROL_EVENTID */
+struct wmi_bf_control_event {
+	/* wmi_fw_status */
+	u8 status;
+	u8 reserved[3];
+} __packed;
+
+/* WMI_COMMAND_NOT_SUPPORTED_EVENTID */
 struct wmi_command_not_supported_event {
 	/* device id */
 	u8 mid;
@@ -2963,4 +3252,62 @@ struct wmi_command_not_supported_event {
 	__le16 reserved1;
 } __packed;
 
+/* WMI_TSF_SYNC_CMDID */
+struct wmi_tsf_sync_cmd {
+	/* The time interval to send announce frame in one BI */
+	u8 interval_ms;
+	/* The mcs to send announce frame */
+	u8 mcs;
+	u8 reserved[6];
+} __packed;
+
+/* WMI_TSF_SYNC_STATUS_EVENTID */
+enum wmi_tsf_sync_status {
+	WMI_TSF_SYNC_SUCCESS	= 0x00,
+	WMI_TSF_SYNC_FAILED	= 0x01,
+	WMI_TSF_SYNC_REJECTED	= 0x02,
+};
+
+/* WMI_TSF_SYNC_STATUS_EVENTID */
+struct wmi_tsf_sync_status_event {
+	/* enum wmi_tsf_sync_status */
+	u8 status;
+	u8 reserved[3];
+} __packed;
+
+/* WMI_GET_CCA_INDICATIONS_EVENTID */
+struct wmi_get_cca_indications_event {
+	/* wmi_fw_status */
+	u8 status;
+	/* CCA-Energy Detect in percentage over last BI (0..100) */
+	u8 cca_ed_percent;
+	/* Averaged CCA-Energy Detect in percent over number of BIs (0..100) */
+	u8 cca_ed_avg_percent;
+	/* NAV percent over last BI (0..100) */
+	u8 nav_percent;
+	/* Averaged NAV percent over number of BIs (0..100) */
+	u8 nav_avg_percent;
+	u8 reserved[3];
+} __packed;
+
+/* WMI_SET_CCA_INDICATIONS_BI_AVG_NUM_CMDID */
+struct wmi_set_cca_indications_bi_avg_num_cmd {
+	/* set the number of bis to average cca_ed (0..255) */
+	u8 bi_number;
+	u8 reserved[3];
+} __packed;
+
+/* WMI_SET_CCA_INDICATIONS_BI_AVG_NUM_EVENTID */
+struct wmi_set_cca_indications_bi_avg_num_event {
+	/* wmi_fw_status */
+	u8 status;
+	u8 reserved[3];
+} __packed;
+
+/* WMI_INTERNAL_FW_SET_CHANNEL */
+struct wmi_internal_fw_set_channel_event {
+	u8 channel_num;
+	u8 reserved[3];
+} __packed;
+
 #endif /* __WILOCITY_WMI_H__ */
-- 
1.9.1