[PATCH v5] ethdev: check Rx/Tx offloads

[Wei Dai <wei.dai@intel.com>]

This patch check if a requested offloading is supported
in the device capability.
Any offloading is disabled by default if it is not set
in rte_eth_dev_configure( ) and rte_eth_[rt]x_queue_setup().
A per port offloading can only be enabled in
rte_eth_dev_configure(). If a per port offloading is
sent to rte_eth_[rt]x_queue_setup( ), return error.
Only per queue offloading can be sent to
rte_eth_[rt]x_queue_setup( ). A per queue offloading is
enabled only if it is enabled in rte_eth_dev_configure( ) OR
if it is enabled in rte_eth_[rt]x_queue_setup( ).
If a per queue offloading is enabled in rte_eth_dev_configure(),
it can't be disabled in rte_eth_[rt]x_queue_setup( ).
If a per queue offloading is disabled in rte_eth_dev_configure( ),
it can be enabled or disabled( ) in rte_eth_[rt]x_queue_setup( ).

This patch can make such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.

Signed-off-by: Wei Dai <wei.dai@intel.com>
---
 lib/librte_ether/rte_ethdev.c | 56 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)

diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index f0f53d4..5485f47 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -1196,6 +1196,28 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
 							ETHER_MAX_LEN;
 	}
 
+	/* Any requested offload must be within its device capability */
+	if ((local_conf.rxmode.offloads & dev_info.rx_offload_capa) !=
+	     local_conf.rxmode.offloads) {
+		RTE_PMD_DEBUG_TRACE("ethdev port_id=%d requested Rx offloads "
+				    "0x%" PRIx64 " doesn't match Rx offloads "
+				    "capability 0x%" PRIx64 "\n",
+				    port_id,
+				    local_conf.rxmode.offloads,
+				    dev_info.rx_offload_capa);
+		return -EINVAL;
+	}
+	if ((local_conf.txmode.offloads & dev_info.tx_offload_capa) !=
+	     local_conf.txmode.offloads) {
+		RTE_PMD_DEBUG_TRACE("ethdev port_id=%d requested Tx offloads "
+				    "0x%" PRIx64 " doesn't match Tx offloads "
+				    "capability 0x%" PRIx64 "\n",
+				    port_id,
+				    local_conf.txmode.offloads,
+				    dev_info.tx_offload_capa);
+		return -EINVAL;
+	}
+
 	/*
 	 * Setup new number of RX/TX queues and reconfigure device.
 	 */
@@ -1547,6 +1569,23 @@ rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
 						    &local_conf.offloads);
 	}
 
+	/*
+	 * Only per-queue offload can be enabled from application.
+	 * If any pure per-port offload is sent to this function, return -EINVAL
+	 */
+	if ((local_conf.offloads & dev_info.rx_queue_offload_capa) !=
+	     local_conf.offloads) {
+		RTE_PMD_DEBUG_TRACE("Ethdev port_id=%d rx_queue_id=%d "
+				    "Requested offload 0x%" PRIx64 "doesn't "
+				    "match per-queue capability 0x%" PRIx64
+				    " in rte_eth_rx_queue_setup( )\n",
+				    port_id,
+				    rx_queue_id,
+				    local_conf.offloads,
+				    dev_info.rx_queue_offload_capa);
+		return -EINVAL;
+	}
+
 	ret = (*dev->dev_ops->rx_queue_setup)(dev, rx_queue_id, nb_rx_desc,
 					      socket_id, &local_conf, mp);
 	if (!ret) {
@@ -1681,6 +1720,23 @@ rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,
 					  &local_conf.offloads);
 	}
 
+	/*
+	 * Only per-queue offload can be enabled from applcation.
+	 * If any pure per-port offload is sent to this function, return -EINVAL
+	 */
+	if ((local_conf.offloads & dev_info.tx_queue_offload_capa) !=
+	     local_conf.offloads) {
+		RTE_PMD_DEBUG_TRACE("Ethdev port_id=%d tx_queue_id=%d "
+				    "Requested offload 0x%" PRIx64 "doesn't "
+				    "match per-queue capability 0x%" PRIx64
+				    " in rte_eth_tx_queue_setup( )\n",
+				    port_id,
+				    tx_queue_id,
+				    local_conf.offloads,
+				    dev_info.tx_queue_offload_capa);
+		return -EINVAL;
+	}
+
 	return eth_err(port_id, (*dev->dev_ops->tx_queue_setup)(dev,
 		       tx_queue_id, nb_tx_desc, socket_id, &local_conf));
 }
-- 
2.7.5