All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oza Pawandeep <poza@codeaurora.org>
To: Bjorn Helgaas <bhelgaas@google.com>,
	Philippe Ombredanne <pombredanne@nexb.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Kate Stewart <kstewart@linuxfoundation.org>,
	linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
	Dongdong Liu <liudongdong3@huawei.com>,
	Keith Busch <keith.busch@intel.com>, Wei Zhang <wzhang@fb.com>,
	Sinan Kaya <okaya@codeaurora.org>,
	Timur Tabi <timur@codeaurora.org>
Cc: Oza Pawandeep <poza@codeaurora.org>
Subject: [PATCH v15 8/9] PCI/DPC: Unify and plumb error handling into DPC
Date: Thu,  3 May 2018 01:03:57 -0400	[thread overview]
Message-ID: <1525323838-1735-9-git-send-email-poza@codeaurora.org> (raw)
In-Reply-To: <1525323838-1735-1-git-send-email-poza@codeaurora.org>

Current DPC driver does not do recovery, e.g. calling end-point's driver's
callbacks, which sanitize the sw.

DPC driver implements link_reset callback, and calls pci_do_recovery().

Signed-off-by: Oza Pawandeep <poza@codeaurora.org>

diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 80ec384..aed7c9f 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -73,29 +73,21 @@ static void dpc_wait_link_inactive(struct dpc_dev *dpc)
 	pcie_wait_for_link(pdev, false);
 }
 
-static void dpc_work(struct work_struct *work)
+static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
 {
-	struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
-	struct pci_dev *dev, *temp, *pdev = dpc->dev->port;
-	struct pci_bus *parent = pdev->subordinate;
-	u16 cap = dpc->cap_pos, ctl;
-
-	pci_lock_rescan_remove();
-	list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
-					 bus_list) {
-		pci_dev_get(dev);
-		pci_dev_set_disconnected(dev, NULL);
-		if (pci_has_subordinate(dev))
-			pci_walk_bus(dev->subordinate,
-				     pci_dev_set_disconnected, NULL);
-		pci_stop_and_remove_bus_device(dev);
-		pci_dev_put(dev);
-	}
-	pci_unlock_rescan_remove();
+	struct dpc_dev *dpc;
+	struct pcie_device *pciedev;
+	struct device *devdpc;
+	u16 cap, ctl;
+
+	devdpc = pcie_port_find_device(pdev, PCIE_PORT_SERVICE_DPC);
+	pciedev = to_pcie_device(devdpc);
+	dpc = get_service_data(pciedev);
+	cap = dpc->cap_pos;
 
 	dpc_wait_link_inactive(dpc);
 	if (dpc->rp_extensions && dpc_wait_rp_inactive(dpc))
-		return;
+		return PCI_ERS_RESULT_DISCONNECT;
 	if (dpc->rp_extensions && dpc->rp_pio_status) {
 		pci_write_config_dword(pdev, cap + PCI_EXP_DPC_RP_PIO_STATUS,
 				       dpc->rp_pio_status);
@@ -108,6 +100,17 @@ static void dpc_work(struct work_struct *work)
 	pci_read_config_word(pdev, cap + PCI_EXP_DPC_CTL, &ctl);
 	pci_write_config_word(pdev, cap + PCI_EXP_DPC_CTL,
 			      ctl | PCI_EXP_DPC_CTL_INT_EN);
+
+	return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void dpc_work(struct work_struct *work)
+{
+	struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
+	struct pci_dev *pdev = dpc->dev->port;
+
+	/* From DPC point of view error is always FATAL. */
+	pcie_do_recovery(pdev, DPC_FATAL);
 }
 
 static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
@@ -288,6 +291,7 @@ static struct pcie_port_service_driver dpcdriver = {
 	.service	= PCIE_PORT_SERVICE_DPC,
 	.probe		= dpc_probe,
 	.remove		= dpc_remove,
+	.reset_link	= dpc_reset_link,
 };
 
 static int __init dpc_service_init(void)
diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 877785d..526aba8 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -181,11 +181,12 @@ static pci_ers_result_t default_reset_link(struct pci_dev *dev)
 	return PCI_ERS_RESULT_RECOVERED;
 }
 
-static pci_ers_result_t reset_link(struct pci_dev *dev)
+static pci_ers_result_t reset_link(struct pci_dev *dev, int severity)
 {
 	struct pci_dev *udev;
 	pci_ers_result_t status;
 	struct pcie_port_service_driver *driver;
+	u32 service;
 
 	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 		/* Reset this port for all subordinates */
@@ -196,7 +197,12 @@ static pci_ers_result_t reset_link(struct pci_dev *dev)
 	}
 
 	/* Use the aer driver of the component firstly */
-	driver = pcie_port_find_service(udev, PCIE_PORT_SERVICE_AER);
+	if (severity == DPC_FATAL)
+		service = PCIE_PORT_SERVICE_DPC;
+	else
+		service = PCIE_PORT_SERVICE_AER;
+
+	driver = pcie_port_find_service(udev, service);
 
 	if (driver && driver->reset_link) {
 		status = driver->reset_link(udev);
@@ -302,7 +308,7 @@ static pci_ers_result_t do_fatal_recovery(struct pci_dev *dev, int severity)
 		pci_dev_put(pdev);
 	}
 
-	result = reset_link(udev);
+	result = reset_link(udev, severity);
 	if (result == PCI_ERS_RESULT_RECOVERED)
 		if (pcie_wait_for_link(udev, true))
 			pci_rescan_bus(udev->bus);
@@ -326,7 +332,8 @@ void pcie_do_recovery(struct pci_dev *dev, int severity)
 	pci_ers_result_t status;
 	enum pci_channel_state state;
 
-	if (severity == AER_FATAL) {
+	if ((severity == AER_FATAL) ||
+	   (severity == DPC_FATAL)) {
 		status = do_fatal_recovery(dev, severity);
 		if (status != PCI_ERS_RESULT_RECOVERED)
 			goto failed;
diff --git a/include/linux/aer.h b/include/linux/aer.h
index 8f87bbe..0c506fe 100644
--- a/include/linux/aer.h
+++ b/include/linux/aer.h
@@ -14,6 +14,7 @@
 #define AER_NONFATAL			0
 #define AER_FATAL			1
 #define AER_CORRECTABLE			2
+#define DPC_FATAL			4
 
 struct pci_dev;
 
-- 
2.7.4

  parent reply	other threads:[~2018-05-03  5:03 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-03  5:03 [PATCH v15 0/9] Address error and recovery for AER and DPC Oza Pawandeep
2018-05-03  5:03 ` [PATCH v15 1/9] PCI: Unify wait for link active into generic PCI Oza Pawandeep
2018-05-10 13:18   ` Bjorn Helgaas
2018-05-03  5:03 ` [PATCH v15 2/9] pci-error-recovery: Add AER_FATAL handling Oza Pawandeep
2018-05-03  5:03 ` [PATCH v15 3/9] PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices Oza Pawandeep
2018-05-08 23:53   ` Bjorn Helgaas
2018-05-09 13:07     ` Bjorn Helgaas
2018-05-09 13:14       ` poza
2018-05-09 23:21         ` Bjorn Helgaas
2018-05-10  7:01           ` poza
2018-05-10 13:10             ` Bjorn Helgaas
2018-05-10 13:15               ` okaya
2018-05-10 14:18                 ` poza
2018-05-10 13:17   ` Bjorn Helgaas
2018-05-03  5:03 ` [PATCH v15 4/9] PCI/AER: Rename error recovery to generic PCI naming Oza Pawandeep
2018-05-03  5:03 ` [PATCH v15 5/9] PCI/AER: Factor out error reporting from AER Oza Pawandeep
2018-05-03 21:52   ` kbuild test robot
2018-05-03 22:53   ` kbuild test robot
2018-05-04  6:48   ` poza
2018-05-03  5:03 ` [PATCH v15 6/9] PCI/PORTDRV: Implement generic find service Oza Pawandeep
2018-05-03  5:03 ` [PATCH v15 7/9] PCI/PORTDRV: Implement generic find device Oza Pawandeep
2018-05-10 13:31   ` Bjorn Helgaas
2018-05-03  5:03 ` Oza Pawandeep [this message]
2018-05-10 13:22   ` [PATCH v15 8/9] PCI/DPC: Unify and plumb error handling into DPC Bjorn Helgaas
2018-05-10 14:26     ` poza
2018-05-10 16:27       ` Bjorn Helgaas
2018-05-03  5:03 ` [PATCH v15 9/9] PCI/DPC: Disable ERR_NONFATAL and enable ERR_FATAL for DPC Oza Pawandeep
2018-05-10 13:26   ` Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1525323838-1735-9-git-send-email-poza@codeaurora.org \
    --to=poza@codeaurora.org \
    --cc=bhelgaas@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=keith.busch@intel.com \
    --cc=kstewart@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=liudongdong3@huawei.com \
    --cc=okaya@codeaurora.org \
    --cc=pombredanne@nexb.com \
    --cc=tglx@linutronix.de \
    --cc=timur@codeaurora.org \
    --cc=wzhang@fb.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.