All of lore.kernel.org
 help / color / mirror / Atom feed
From: Abhishek Sahu <absahu@codeaurora.org>
To: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mtd@lists.infradead.org, Andy Gross <andy.gross@linaro.org>,
	Archit Taneja <architt@codeaurora.org>,
	Abhishek Sahu <absahu@codeaurora.org>
Subject: [PATCH v2 11/14] mtd: rawnand: qcom: minor code reorganization for bad block check
Date: Thu,  3 May 2018 17:50:38 +0530	[thread overview]
Message-ID: <1525350041-22995-12-git-send-email-absahu@codeaurora.org> (raw)
In-Reply-To: <1525350041-22995-1-git-send-email-absahu@codeaurora.org>

The QCOM NAND layout is such that, the bad block byte offset for
last codeword will come to first byte in spare area. Currently,
the raw read for last codeword is being done with copy_last_cw
function. It does following 2 things

1. Read the last codeword bytes from NAND chip to NAND
   controller internal HW buffer.
2. Copy all these bytes from this HW buffer to driver RAM
   buffer.

For bad block check, maximum two bytes are required so instead of
copying the complete bytes in step 2, only those bbm_size bytes
can be copied.

This patch does minor code reorganization for the same. After
this, copy_last_cw function won’t be required.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
---
* Changes from v1:

 NEW CHANGE

 drivers/mtd/nand/raw/qcom_nandc.c | 66 +++++++++++++++------------------------
 1 file changed, 25 insertions(+), 41 deletions(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 17b7f3af..10bdc6c 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -1771,41 +1771,6 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
 	return parse_read_errors(host, data_buf_start, oob_buf_start);
 }
 
-/*
- * a helper that copies the last step/codeword of a page (containing free oob)
- * into our local buffer
- */
-static int copy_last_cw(struct qcom_nand_host *host, int page)
-{
-	struct nand_chip *chip = &host->chip;
-	struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-	int size;
-	int ret;
-
-	clear_read_regs(nandc);
-
-	size = host->use_ecc ? host->cw_data : host->cw_size;
-
-	/* prepare a clean read buffer */
-	memset(nandc->data_buffer, 0xff, size);
-
-	set_address(host, host->cw_size * (ecc->steps - 1), page);
-	update_rw_regs(host, 1, true);
-
-	config_nand_single_cw_page_read(nandc);
-
-	read_data_dma(nandc, FLASH_BUF_ACC, nandc->data_buffer, size, 0);
-
-	ret = submit_descs(nandc);
-	if (ret)
-		dev_err(nandc->dev, "failed to copy last codeword\n");
-
-	free_descs(nandc);
-
-	return ret;
-}
-
 /* implements ecc->read_page() */
 static int qcom_nandc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 				uint8_t *buf, int oob_required, int page)
@@ -2121,6 +2086,7 @@ static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 	int page, ret, bbpos, bad = 0;
 	u32 flash_status;
+	u8 *bbm_bytes_buf = chip->data_buf;
 
 	page = (int)(ofs >> chip->page_shift) & chip->pagemask;
 
@@ -2131,11 +2097,31 @@ static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
 	 * that contains the BBM
 	 */
 	host->use_ecc = false;
+	bbpos = mtd->writesize - host->cw_size * (ecc->steps - 1);
 
 	clear_bam_transaction(nandc);
-	ret = copy_last_cw(host, page);
-	if (ret)
+	clear_read_regs(nandc);
+
+	set_address(host, host->cw_size * (ecc->steps - 1), page);
+	update_rw_regs(host, 1, true);
+
+	/*
+	 * The last codeword data will be copied from NAND device to NAND
+	 * controller internal HW buffer. Copy only required BBM size bytes
+	 * from this HW buffer to bbm_bytes_buf which is present at
+	 * bbpos offset.
+	 */
+	nandc_set_read_loc(nandc, 0, bbpos, host->bbm_size, 1);
+	config_nand_single_cw_page_read(nandc);
+	read_data_dma(nandc, FLASH_BUF_ACC + bbpos, bbm_bytes_buf,
+		      host->bbm_size, 0);
+
+	ret = submit_descs(nandc);
+	free_descs(nandc);
+	if (ret) {
+		dev_err(nandc->dev, "failed to copy bad block bytes\n");
 		goto err;
+	}
 
 	flash_status = le32_to_cpu(nandc->reg_read_buf[0]);
 
@@ -2144,12 +2130,10 @@ static int qcom_nandc_block_bad(struct mtd_info *mtd, loff_t ofs)
 		goto err;
 	}
 
-	bbpos = mtd->writesize - host->cw_size * (ecc->steps - 1);
-
-	bad = nandc->data_buffer[bbpos] != 0xff;
+	bad = bbm_bytes_buf[0] != 0xff;
 
 	if (chip->options & NAND_BUSWIDTH_16)
-		bad = bad || (nandc->data_buffer[bbpos + 1] != 0xff);
+		bad = bad || (bbm_bytes_buf[1] != 0xff);
 err:
 	return bad;
 }
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc.
is a member of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2018-05-03 12:20 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-03 12:20 [PATCH v2 00/14] Update for QCOM NAND driver Abhishek Sahu
2018-05-03 12:20 ` [PATCH v2 01/14] mtd: rawnand: helper function for setting up ECC parameters Abhishek Sahu
2018-05-07  3:40   ` Masahiro Yamada
2018-05-07  6:01     ` Abhishek Sahu
2018-05-07  7:39     ` Boris Brezillon
2018-05-08  6:14       ` Masahiro Yamada
2018-05-08  7:21         ` Abhishek Sahu
2018-05-07  8:16   ` Boris Brezillon
2018-05-08  7:22     ` Abhishek Sahu
2018-05-03 12:20 ` [PATCH v2 02/14] mtd: rawnand: denali: use helper function for ecc setup Abhishek Sahu
2018-05-21 14:30   ` Miquel Raynal
2018-05-22 14:09     ` Abhishek Sahu
2018-05-03 12:20 ` [PATCH v2 03/14] dt-bindings: qcom_nandc: make nand-ecc-strength optional Abhishek Sahu
2018-05-03 12:20   ` Abhishek Sahu
2018-05-07  8:40   ` Boris Brezillon
2018-05-21 14:32   ` Miquel Raynal
2018-05-22 14:08     ` Abhishek Sahu
2018-05-03 12:20 ` [PATCH v2 04/14] mtd: rawnand: qcom: use the ecc strength from device parameter Abhishek Sahu
2018-05-07  8:28   ` Boris Brezillon
2018-05-08  7:26     ` Abhishek Sahu
2018-05-03 12:20 ` [PATCH v2 05/14] mtd: rawnand: qcom: wait for desc completion in all BAM channels Abhishek Sahu
2018-05-22  6:47   ` Miquel Raynal
2018-05-22 14:07     ` Abhishek Sahu
2018-05-03 12:20 ` [PATCH v2 06/14] mtd: rawnand: qcom: erased page detection for uncorrectable errors only Abhishek Sahu
2018-05-22  7:04   ` Miquel Raynal
2018-05-22 14:10     ` Abhishek Sahu
2018-05-03 12:20 ` [PATCH v2 07/14] mtd: rawnand: qcom: fix null pointer access for erased page detection Abhishek Sahu
2018-05-22  7:16   ` Miquel Raynal
2018-05-22 14:11     ` Abhishek Sahu
2018-05-03 12:20 ` [PATCH v2 08/14] mtd: rawnand: qcom: parse read errors for read oob also Abhishek Sahu
2018-05-03 12:20 ` [PATCH v2 09/14] mtd: rawnand: qcom: modify write_oob to remove read codeword part Abhishek Sahu
2018-05-22 10:02   ` Miquel Raynal
2018-05-22 14:14     ` Abhishek Sahu
2018-05-03 12:20 ` [PATCH v2 10/14] mtd: rawnand: qcom: fix return value for raw page read Abhishek Sahu
2018-05-22 12:04   ` Miquel Raynal
2018-05-22 14:15     ` Abhishek Sahu
2018-05-03 12:20 ` Abhishek Sahu [this message]
2018-05-03 12:20 ` [PATCH v2 12/14] mtd: rawnand: qcom: check for operation errors in case of raw read Abhishek Sahu
2018-05-03 12:20 ` [PATCH v2 13/14] mtd: rawnand: qcom: helper function for " Abhishek Sahu
2018-05-03 12:20 ` [PATCH v2 14/14] mtd: rawnand: qcom: erased page bitflips detection Abhishek Sahu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1525350041-22995-12-git-send-email-absahu@codeaurora.org \
    --to=absahu@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=architt@codeaurora.org \
    --cc=boris.brezillon@bootlin.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.