All of lore.kernel.org
 help / color / mirror / Atom feed
From: Balakrishna Godavarthi <bgodavar@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: linux-bluetooth@vger.kernel.org, rtatiya@codeaurora.org,
	hemantg@codeaurora.org, linux-arm-msm@vger.kernel.org,
	Balakrishna Godavarthi <bgodavar@codeaurora.org>
Subject: [PATCH v4 3/3] Bluetooth: btqca: Add wcn3990 firmware download support.
Date: Fri,  4 May 2018 21:05:06 +0530	[thread overview]
Message-ID: <1525448106-18616-4-git-send-email-bgodavar@codeaurora.org> (raw)
In-Reply-To: <1525448106-18616-1-git-send-email-bgodavar@codeaurora.org>

This patch enables the RAM and NV patch download for wcn3990.

Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
 drivers/bluetooth/btqca.c | 45 ++++++++++++++++++++++++++++++++++++++++++++-
 drivers/bluetooth/btqca.h | 19 +++++++++++++++++++
 2 files changed, 63 insertions(+), 1 deletion(-)

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 8219816..12b4dd3 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -27,7 +27,7 @@
 
 #define VERSION "0.1"
 
-static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
+int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
 {
 	struct sk_buff *skb;
 	struct edl_event_hdr *edl;
@@ -380,6 +380,49 @@ int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate)
 }
 EXPORT_SYMBOL_GPL(qca_uart_setup_rome);
 
+int qca_uart_setup_cherokee(struct hci_dev *hdev, uint8_t baudrate,
+			    u32 *soc_ver)
+{
+	struct rome_config config;
+	int err;
+
+	/* we are using the existing funciton of ROME,
+	 * instead of duplicating the function for wcn3990.
+	 */
+	config.user_baud_rate = baudrate;
+	/* Download rampatch file */
+	config.type = TLV_TYPE_PATCH;
+	snprintf(config.fwname, sizeof(config.fwname), "qca/rampatch_%08x.tlv",
+		 *soc_ver);
+	err = rome_download_firmware(hdev, &config);
+	if (err < 0) {
+		BT_ERR("%s: Failed to download patch (%d)", hdev->name, err);
+		return err;
+	}
+
+	/* Download NVM configuration */
+	config.type = TLV_TYPE_NVM;
+	snprintf(config.fwname, sizeof(config.fwname), "qca/nvm_%08x.bin",
+		 *soc_ver);
+	err = rome_download_firmware(hdev, &config);
+	if (err < 0) {
+		BT_ERR("%s: Failed to download NVM (%d)", hdev->name, err);
+		return err;
+	}
+
+	/* Perform HCI reset */
+	err = rome_reset(hdev);
+	if (err < 0) {
+		BT_ERR("%s: Failed to run HCI_RESET (%d)", hdev->name, err);
+		return err;
+	}
+
+	bt_dev_info(hdev, "wcn3990 setup on UART is completed");
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca_uart_setup_cherokee);
+
 MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
 MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
 MODULE_VERSION(VERSION);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index 13d77fd..2b41987 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -37,6 +37,9 @@
 #define EDL_TAG_ID_HCI			(17)
 #define EDL_TAG_ID_DEEP_SLEEP		(27)
 
+#define CHEROKEE_POWERON_PULSE		(0xFC)
+#define CHEROKEE_POWEROFF_PULSE		(0xC0)
+
 enum qca_bardrate {
 	QCA_BAUDRATE_115200 	= 0,
 	QCA_BAUDRATE_57600,
@@ -124,10 +127,16 @@ struct tlv_type_hdr {
 	__u8   data[0];
 } __packed;
 
+int qca_btsoc_cleanup(struct hci_dev *hdev);
+int btqca_power_setup(bool on);
+
 #if IS_ENABLED(CONFIG_BT_QCA)
 
 int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int qca_uart_setup_rome(struct hci_dev *hdev, uint8_t baudrate);
+int qca_uart_setup_cherokee(struct hci_dev *hdev, uint8_t baudrate,
+			    u32 *soc_ver);
+int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version);
 
 #else
 
@@ -141,4 +150,14 @@ static inline int qca_uart_setup_rome(struct hci_dev *hdev, int speed)
 	return -EOPNOTSUPP;
 }
 
+static int qca_uart_setup_cherokee(struct hci_dev *hdev, uint8_t baudrate,
+				   u32 *soc_ver)
+{
+	return -EOPNOTSUPP;
+}
+
+static int rome_patch_ver_req(struct hci_dev *hdev, u32 *rome_version)
+{
+	return -EOPNOTSUPP;
+}
 #endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  parent reply	other threads:[~2018-05-04 15:35 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-04 15:35 [PATCH v4 0/3] Enable Bluetooth functionality for WCN3990 Balakrishna Godavarthi
2018-05-04 15:35 ` [PATCH v4 1/3] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn3990 Balakrishna Godavarthi
2018-05-04 15:35 ` [PATCH v4 2/3] Bluetooth: hci_qca: Add support for Qualcomm Bluetooth " Balakrishna Godavarthi
2018-05-05  1:17   ` Matthias Kaehlcke
2018-05-09  8:56     ` Balakrishna Godavarthi
2018-05-09  9:27     ` Balakrishna Godavarthi
2018-05-09 10:07     ` Balakrishna Godavarthi
2018-05-09 17:24       ` Matthias Kaehlcke
2018-05-10 16:01         ` Balakrishna Godavarthi
2018-05-05 19:21   ` kbuild test robot
2018-05-05 19:45   ` kbuild test robot
2018-05-05 20:11   ` [RFC PATCH] Bluetooth: hci_qca: btqca_disable_regulators() can be static kbuild test robot
2018-05-04 15:35 ` Balakrishna Godavarthi [this message]
2018-05-05 19:11   ` [PATCH v4 3/3] Bluetooth: btqca: Add wcn3990 firmware download support kbuild test robot
2018-05-05 19:14   ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1525448106-18616-4-git-send-email-bgodavar@codeaurora.org \
    --to=bgodavar@codeaurora.org \
    --cc=hemantg@codeaurora.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=rtatiya@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.