All of lore.kernel.org
 help / color / mirror / Atom feed
From: Akinobu Mita <akinobu.mita@gmail.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org
Cc: Akinobu Mita <akinobu.mita@gmail.com>,
	Jacopo Mondi <jacopo+renesas@jmondi.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Hans Verkuil <hans.verkuil@cisco.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Mauro Carvalho Chehab <mchehab@s-opensource.com>
Subject: [PATCH v5 10/14] media: ov772x: reconstruct s_frame_interval()
Date: Sun,  6 May 2018 23:19:25 +0900	[thread overview]
Message-ID: <1525616369-8843-11-git-send-email-akinobu.mita@gmail.com> (raw)
In-Reply-To: <1525616369-8843-1-git-send-email-akinobu.mita@gmail.com>

This splits the s_frame_interval() in subdev video ops into selecting the
frame interval and setting up the registers.

This is a preparatory change to avoid accessing registers under power
saving mode.

Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
---
* v5
- Align arguments to open parenthesis
- Sort variable declarations

 drivers/media/i2c/ov772x.c | 56 +++++++++++++++++++++++++++++-----------------
 1 file changed, 35 insertions(+), 21 deletions(-)

diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 6c0c792..92ad13f 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -617,25 +617,16 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
 	return 0;
 }
 
-static int ov772x_set_frame_rate(struct ov772x_priv *priv,
-				 struct v4l2_fract *tpf,
-				 const struct ov772x_color_format *cfmt,
-				 const struct ov772x_win_size *win)
+static unsigned int ov772x_select_fps(struct ov772x_priv *priv,
+				      struct v4l2_fract *tpf)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
-	unsigned long fin = clk_get_rate(priv->clk);
 	unsigned int fps = tpf->numerator ?
 			   tpf->denominator / tpf->numerator :
 			   tpf->denominator;
 	unsigned int best_diff;
-	unsigned int fsize;
-	unsigned int pclk;
 	unsigned int diff;
 	unsigned int idx;
 	unsigned int i;
-	u8 clkrc = 0;
-	u8 com4 = 0;
-	int ret;
 
 	/* Approximate to the closest supported frame interval. */
 	best_diff = ~0L;
@@ -646,7 +637,25 @@ static int ov772x_set_frame_rate(struct ov772x_priv *priv,
 			best_diff = diff;
 		}
 	}
-	fps = ov772x_frame_intervals[idx];
+
+	return ov772x_frame_intervals[idx];
+}
+
+static int ov772x_set_frame_rate(struct ov772x_priv *priv,
+				 unsigned int fps,
+				 const struct ov772x_color_format *cfmt,
+				 const struct ov772x_win_size *win)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+	unsigned long fin = clk_get_rate(priv->clk);
+	unsigned int best_diff;
+	unsigned int fsize;
+	unsigned int pclk;
+	unsigned int diff;
+	unsigned int i;
+	u8 clkrc = 0;
+	u8 com4 = 0;
+	int ret;
 
 	/* Use image size (with blankings) to calculate desired pixel clock. */
 	switch (cfmt->com7 & OFMT_MASK) {
@@ -711,10 +720,6 @@ static int ov772x_set_frame_rate(struct ov772x_priv *priv,
 	if (ret < 0)
 		return ret;
 
-	tpf->numerator = 1;
-	tpf->denominator = fps;
-	priv->fps = tpf->denominator;
-
 	return 0;
 }
 
@@ -735,8 +740,20 @@ static int ov772x_s_frame_interval(struct v4l2_subdev *sd,
 {
 	struct ov772x_priv *priv = to_ov772x(sd);
 	struct v4l2_fract *tpf = &ival->interval;
+	unsigned int fps;
+	int ret;
+
+	fps = ov772x_select_fps(priv, tpf);
+
+	ret = ov772x_set_frame_rate(priv, fps, priv->cfmt, priv->win);
+	if (ret)
+		return ret;
 
-	return ov772x_set_frame_rate(priv, tpf, priv->cfmt, priv->win);
+	tpf->numerator = 1;
+	tpf->denominator = fps;
+	priv->fps = fps;
+
+	return 0;
 }
 
 static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
@@ -993,7 +1010,6 @@ static int ov772x_set_params(struct ov772x_priv *priv,
 			     const struct ov772x_win_size *win)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
-	struct v4l2_fract tpf;
 	int ret;
 	u8  val;
 
@@ -1075,9 +1091,7 @@ static int ov772x_set_params(struct ov772x_priv *priv,
 		goto ov772x_set_fmt_error;
 
 	/* COM4, CLKRC: Set pixel clock and framerate. */
-	tpf.numerator = 1;
-	tpf.denominator = priv->fps;
-	ret = ov772x_set_frame_rate(priv, &tpf, cfmt, win);
+	ret = ov772x_set_frame_rate(priv, priv->fps, cfmt, win);
 	if (ret < 0)
 		goto ov772x_set_fmt_error;
 
-- 
2.7.4


  parent reply	other threads:[~2018-05-06 14:20 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-06 14:19 [PATCH v5 00/14] media: ov772x: support media controller, device tree probing, etc Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 01/14] media: dt-bindings: ov772x: add device tree binding Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 02/14] media: ov772x: correct setting of banding filter Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 03/14] media: ov772x: allow i2c controllers without I2C_FUNC_PROTOCOL_MANGLING Akinobu Mita
2018-05-29 12:59   ` Mauro Carvalho Chehab
2018-05-29 13:29     ` Wolfram Sang
2018-05-29 14:32       ` Mauro Carvalho Chehab
2018-05-06 14:19 ` [PATCH v5 04/14] media: ov772x: add checks for register read errors Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 05/14] media: ov772x: add media controller support Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 06/14] media: ov772x: use generic names for reset and powerdown gpios Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 07/14] media: ov772x: omit consumer ID when getting clock reference Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 08/14] media: ov772x: support device tree probing Akinobu Mita
2018-05-07  9:26   ` Sakari Ailus
2018-05-07 14:52     ` Akinobu Mita
2018-05-14  9:16     ` jacopo mondi
2018-05-14 11:21       ` Sakari Ailus
2018-05-06 14:19 ` [PATCH v5 09/14] media: ov772x: handle nested s_power() calls Akinobu Mita
2018-05-06 14:19 ` Akinobu Mita [this message]
2018-05-14  9:02   ` [PATCH v5 10/14] media: ov772x: reconstruct s_frame_interval() jacopo mondi
2018-05-06 14:19 ` [PATCH v5 11/14] media: ov772x: use v4l2_ctrl to get current control value Akinobu Mita
2018-05-06 14:19 ` [PATCH v5 12/14] media: ov772x: avoid accessing registers under power saving mode Akinobu Mita
2018-05-14  9:06   ` jacopo mondi
2018-05-14  9:49     ` Sakari Ailus
2018-05-14 10:03       ` jacopo mondi
2018-05-06 14:19 ` [PATCH v5 13/14] media: ov772x: make set_fmt() and s_frame_interval() return -EBUSY while streaming Akinobu Mita
2018-05-14  9:10   ` jacopo mondi
2018-05-06 14:19 ` [PATCH v5 14/14] media: ov772x: create subdevice device node Akinobu Mita
2018-05-14  9:11   ` jacopo mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1525616369-8843-11-git-send-email-akinobu.mita@gmail.com \
    --to=akinobu.mita@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hans.verkuil@cisco.com \
    --cc=jacopo+renesas@jmondi.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@s-opensource.com \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.