All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
To: horms@verge.net.au, magnus.damm@gmail.com, robh+dt@kernel.org,
	mark.rutland@arm.com
Cc: devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	Takeshi Kihara <takeshi.kihara.df@renesas.com>,
	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Subject: [PATCH v2 1/2] soc: renesas: rcar-sysc: Add support for R-Car E3 power areas
Date: Tue, 15 May 2018 21:07:38 +0900	[thread overview]
Message-ID: <1526386059-6173-2-git-send-email-yoshihiro.shimoda.uh@renesas.com> (raw)
In-Reply-To: <1526386059-6173-1-git-send-email-yoshihiro.shimoda.uh@renesas.com>

From: Takeshi Kihara <takeshi.kihara.df@renesas.com>

This patch adds Cortex-A53 CPU{0,1}, Cortex-A53 SCU, Cortex-R7, A3VC,
A2VC1 and 3DG-{A,B} power domain areas for the R8A77990 SoC.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[shimoda: fix 3DG-{A,B} and add SPDX-License-Identifier]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 .../bindings/power/renesas,rcar-sysc.txt           |  1 +
 drivers/soc/renesas/Kconfig                        |  5 ++++
 drivers/soc/renesas/Makefile                       |  1 +
 drivers/soc/renesas/r8a77990-sysc.c                | 33 ++++++++++++++++++++++
 drivers/soc/renesas/rcar-sysc.c                    |  3 ++
 drivers/soc/renesas/rcar-sysc.h                    |  1 +
 6 files changed, 44 insertions(+)
 create mode 100644 drivers/soc/renesas/r8a77990-sysc.c

diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
index 3e91d20..180ae65 100644
--- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
+++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt
@@ -21,6 +21,7 @@ Required properties:
       - "renesas,r8a77965-sysc" (R-Car M3-N)
       - "renesas,r8a77970-sysc" (R-Car V3M)
       - "renesas,r8a77980-sysc" (R-Car V3H)
+      - "renesas,r8a77990-sysc" (R-Car E3)
       - "renesas,r8a77995-sysc" (R-Car D3)
   - reg: Address start and address range for the device.
   - #power-domain-cells: Must be 1.
diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
index c0e0286..1d824cb 100644
--- a/drivers/soc/renesas/Kconfig
+++ b/drivers/soc/renesas/Kconfig
@@ -19,6 +19,7 @@ config SOC_RENESAS
 	select SYSC_R8A77965 if ARCH_R8A77965
 	select SYSC_R8A77970 if ARCH_R8A77970
 	select SYSC_R8A77980 if ARCH_R8A77980
+	select SYSC_R8A77990 if ARCH_R8A77990
 	select SYSC_R8A77995 if ARCH_R8A77995
 
 if SOC_RENESAS
@@ -76,6 +77,10 @@ config SYSC_R8A77980
 	bool "R-Car V3H System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
 
+config SYSC_R8A77990
+	bool "R-Car E3 System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
 config SYSC_R8A77995
 	bool "R-Car D3 System Controller support" if COMPILE_TEST
 	select SYSC_RCAR
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
index a86ece7..7dc0f20 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_SYSC_R8A7796)	+= r8a7796-sysc.o
 obj-$(CONFIG_SYSC_R8A77965)	+= r8a77965-sysc.o
 obj-$(CONFIG_SYSC_R8A77970)	+= r8a77970-sysc.o
 obj-$(CONFIG_SYSC_R8A77980)	+= r8a77980-sysc.o
+obj-$(CONFIG_SYSC_R8A77990)	+= r8a77990-sysc.o
 obj-$(CONFIG_SYSC_R8A77995)	+= r8a77995-sysc.o
 
 # Family
diff --git a/drivers/soc/renesas/r8a77990-sysc.c b/drivers/soc/renesas/r8a77990-sysc.c
new file mode 100644
index 0000000..a8c6417
--- /dev/null
+++ b/drivers/soc/renesas/r8a77990-sysc.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Car E3 System Controller
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+
+#include <dt-bindings/power/r8a77990-sysc.h>
+
+#include "rcar-sysc.h"
+
+static const struct rcar_sysc_area r8a77990_areas[] __initconst = {
+	{ "always-on",	    0, 0, R8A77990_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
+	{ "ca53-scu",	0x140, 0, R8A77990_PD_CA53_SCU,  R8A77990_PD_ALWAYS_ON,
+	  PD_SCU },
+	{ "ca53-cpu0",	0x200, 0, R8A77990_PD_CA53_CPU0, R8A77990_PD_CA53_SCU,
+	  PD_CPU_NOCR },
+	{ "ca53-cpu1",	0x200, 1, R8A77990_PD_CA53_CPU1, R8A77990_PD_CA53_SCU,
+	  PD_CPU_NOCR },
+	{ "cr7",	0x240, 0, R8A77990_PD_CR7,	R8A77990_PD_ALWAYS_ON },
+	{ "a3vc",	0x380, 0, R8A77990_PD_A3VC,	R8A77990_PD_ALWAYS_ON },
+	{ "a2vc1",	0x3c0, 1, R8A77990_PD_A2VC1,	R8A77990_PD_A3VC },
+	{ "3dg-a",	0x100, 0, R8A77990_PD_3DG_A,	R8A77990_PD_ALWAYS_ON },
+	{ "3dg-b",	0x100, 1, R8A77990_PD_3DG_B,	R8A77990_PD_3DG_A },
+};
+
+const struct rcar_sysc_info r8a77990_sysc_info __initconst = {
+	.areas = r8a77990_areas,
+	.num_areas = ARRAY_SIZE(r8a77990_areas),
+};
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 99203bd..95120ac 100644
--- a/drivers/soc/renesas/rcar-sysc.c
+++ b/drivers/soc/renesas/rcar-sysc.c
@@ -296,6 +296,9 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
 #ifdef CONFIG_SYSC_R8A77980
 	{ .compatible = "renesas,r8a77980-sysc", .data = &r8a77980_sysc_info },
 #endif
+#ifdef CONFIG_SYSC_R8A77990
+	{ .compatible = "renesas,r8a77990-sysc", .data = &r8a77990_sysc_info },
+#endif
 #ifdef CONFIG_SYSC_R8A77995
 	{ .compatible = "renesas,r8a77995-sysc", .data = &r8a77995_sysc_info },
 #endif
diff --git a/drivers/soc/renesas/rcar-sysc.h b/drivers/soc/renesas/rcar-sysc.h
index 9b24e3a..a22e7cf 100644
--- a/drivers/soc/renesas/rcar-sysc.h
+++ b/drivers/soc/renesas/rcar-sysc.h
@@ -62,6 +62,7 @@ struct rcar_sysc_info {
 extern const struct rcar_sysc_info r8a77965_sysc_info;
 extern const struct rcar_sysc_info r8a77970_sysc_info;
 extern const struct rcar_sysc_info r8a77980_sysc_info;
+extern const struct rcar_sysc_info r8a77990_sysc_info;
 extern const struct rcar_sysc_info r8a77995_sysc_info;
 
 
-- 
1.9.1

  reply	other threads:[~2018-05-15 12:07 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-15 12:07 [PATCH v2 0/2] soc: renesas: r8a77990-sysc: Add support for R-Car E3 Yoshihiro Shimoda
2018-05-15 12:07 ` Yoshihiro Shimoda [this message]
2018-05-16  7:45   ` [PATCH v2 1/2] soc: renesas: rcar-sysc: Add support for R-Car E3 power areas Geert Uytterhoeven
2018-05-16  8:57     ` Simon Horman
2018-05-15 12:07 ` [PATCH v2 2/2] soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B} Yoshihiro Shimoda
2018-05-16  7:47   ` Geert Uytterhoeven
2018-05-16  8:58     ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1526386059-6173-2-git-send-email-yoshihiro.shimoda.uh@renesas.com \
    --to=yoshihiro.shimoda.uh@renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=horms@verge.net.au \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=takeshi.kihara.df@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.