From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932451AbeEWKHu (ORCPT ); Wed, 23 May 2018 06:07:50 -0400 Received: from srv-hp10-72.netsons.net ([94.141.22.72]:50238 "EHLO srv-hp10-72.netsons.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932220AbeEWKFn (ORCPT ); Wed, 23 May 2018 06:05:43 -0400 From: Luca Ceresoli To: linux-media@vger.kernel.org Cc: Sakari Ailus , Luca Ceresoli , Leon Luo , Mauro Carvalho Chehab , linux-kernel@vger.kernel.org, Sakari Ailus Subject: [PATCH v3 2/7] media: imx274: consolidate per-mode data in imx274_frmfmt Date: Wed, 23 May 2018 12:05:15 +0200 Message-Id: <1527069921-21084-3-git-send-email-luca@lucaceresoli.net> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1527069921-21084-1-git-send-email-luca@lucaceresoli.net> References: <1527069921-21084-1-git-send-email-luca@lucaceresoli.net> X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - srv-hp10.netsons.net X-AntiAbuse: Original Domain - vger.kernel.org X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - lucaceresoli.net X-Get-Message-Sender-Via: srv-hp10.netsons.net: authenticated_id: luca+lucaceresoli.net/only user confirmed/virtual account not confirmed X-Authenticated-Sender: srv-hp10.netsons.net: luca@lucaceresoli.net X-Source: X-Source-Args: X-Source-Dir: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Data about the implemented readout modes is partially stored in imx274_formats[], the rest is scattered in several arrays. The latter are then accessed using the mode index, e.g.: min_frame_len[priv->mode_index] Consolidate all these data in imx274_formats[], and store a pointer to the selected mode (i.e. imx274_formats[priv->mode_index]) in the main device struct. This way code to use these data becomes more readable, e.g.: priv->mode->min_frame_len This removes lots of scaffolding code and keeps data about each mode in a unique place. Also remove a parameter to imx274_mode_regs() that is now unused. While this adds the mode pointer to the device struct, it does not remove the mode_index from it because mode_index is still used in two dev_dbg() calls. This will be handled in a follow-up commit. Signed-off-by: Luca Ceresoli Cc: Sakari Ailus --- Changed v2 -> v3: nothing Changed v1 -> v2: - add "media: " prefix to commit message --- drivers/media/i2c/imx274.c | 139 +++++++++++++++++++++------------------------ 1 file changed, 66 insertions(+), 73 deletions(-) diff --git a/drivers/media/i2c/imx274.c b/drivers/media/i2c/imx274.c index 8a8a11b8d75d..2ec31ae4e60d 100644 --- a/drivers/media/i2c/imx274.c +++ b/drivers/media/i2c/imx274.c @@ -147,10 +147,28 @@ enum imx274_mode { }; /* - * imx274 format related structure + * Parameters for each imx274 readout mode. + * + * These are the values to configure the sensor in one of the + * implemented modes. + * + * @size: recommended recording pixels + * @init_regs: registers to initialize the mode + * @min_frame_len: Minimum frame length for each mode (see "Frame Rate + * Adjustment (CSI-2)" in the datasheet) + * @min_SHR: Minimum SHR register value (see "Shutter Setting (CSI-2)" in the + * datasheet) + * @max_fps: Maximum frames per second + * @nocpiop: Number of clocks per internal offset period (see "Integration Time + * in Each Readout Drive Mode (CSI-2)" in the datasheet) */ struct imx274_frmfmt { struct v4l2_frmsize_discrete size; + const struct reg_8 *init_regs; + int min_frame_len; + int min_SHR; + int max_fps; + int nocpiop; }; /* @@ -476,58 +494,35 @@ static const struct reg_8 imx274_tp_regs[] = { {IMX274_TABLE_END, 0x00} }; -static const struct reg_8 *mode_table[] = { - [IMX274_MODE_3840X2160] = imx274_mode1_3840x2160_raw10, - [IMX274_MODE_1920X1080] = imx274_mode3_1920x1080_raw10, - [IMX274_MODE_1280X720] = imx274_mode5_1280x720_raw10, -}; - -/* - * imx274 format related structure - */ +/* nocpiop happens to be the same number for the implemented modes */ static const struct imx274_frmfmt imx274_formats[] = { - { {3840, 2160} }, - { {1920, 1080} }, - { {1280, 720} }, -}; - -/* - * minimal frame length for each mode - * refer to datasheet section "Frame Rate Adjustment (CSI-2)" - */ -static const int min_frame_len[] = { - 4550, /* mode 1, 4K */ - 2310, /* mode 3, 1080p */ - 2310 /* mode 5, 720p */ -}; - -/* - * minimal numbers of SHR register - * refer to datasheet table "Shutter Setting (CSI-2)" - */ -static const int min_SHR[] = { - 12, /* mode 1, 4K */ - 8, /* mode 3, 1080p */ - 8 /* mode 5, 720p */ -}; - -static const int max_frame_rate[] = { - 60, /* mode 1 , 4K */ - 120, /* mode 3, 1080p */ - 120 /* mode 5, 720p */ -}; - -/* - * Number of clocks per internal offset period - * a constant based on mode - * refer to section "Integration Time in Each Readout Drive Mode (CSI-2)" - * in the datasheet - * for the implemented 3 modes, it happens to be the same number - */ -static const int nocpiop[] = { - 112, /* mode 1 , 4K */ - 112, /* mode 3, 1080p */ - 112 /* mode 5, 720p */ + { + /* mode 1, 4K */ + .size = {3840, 2160}, + .init_regs = imx274_mode1_3840x2160_raw10, + .min_frame_len = 4550, + .min_SHR = 12, + .max_fps = 60, + .nocpiop = 112, + }, + { + /* mode 3, 1080p */ + .size = {1920, 1080}, + .init_regs = imx274_mode3_1920x1080_raw10, + .min_frame_len = 2310, + .min_SHR = 8, + .max_fps = 120, + .nocpiop = 112, + }, + { + /* mode 5, 720p */ + .size = {1280, 720}, + .init_regs = imx274_mode5_1280x720_raw10, + .min_frame_len = 2310, + .min_SHR = 8, + .max_fps = 120, + .nocpiop = 112, + }, }; /* @@ -557,6 +552,8 @@ struct imx274_ctrls { * @regmap: Pointer to regmap structure * @reset_gpio: Pointer to reset gpio * @lock: Mutex structure + * @mode: Parameters for the selected readout mode + * (points to imx274_formats[mode_index]) * @mode_index: Resolution mode index */ struct stimx274 { @@ -569,6 +566,7 @@ struct stimx274 { struct regmap *regmap; struct gpio_desc *reset_gpio; struct mutex lock; /* mutex lock for operations */ + const struct imx274_frmfmt *mode; u32 mode_index; }; @@ -704,18 +702,12 @@ static int imx274_write_table(struct stimx274 *priv, const struct reg_8 table[]) } /* - * imx274_mode_regs - Function for set mode registers per mode index + * Set mode registers to start stream. * @priv: Pointer to device structure - * @mode: Mode index value - * - * This is used to start steam per mode index. - * mode = 0, start stream for sensor Mode 1: 4K/raw10 - * mode = 1, start stream for sensor Mode 3: 1080p/raw10 - * mode = 2, start stream for sensor Mode 5: 720p/raw10 * * Return: 0 on success, errors otherwise */ -static int imx274_mode_regs(struct stimx274 *priv, int mode) +static int imx274_mode_regs(struct stimx274 *priv) { int err = 0; @@ -727,7 +719,7 @@ static int imx274_mode_regs(struct stimx274 *priv, int mode) if (err) return err; - err = imx274_write_table(priv, mode_table[mode]); + err = imx274_write_table(priv, priv->mode->init_regs); return err; } @@ -889,6 +881,7 @@ static int imx274_set_fmt(struct v4l2_subdev *sd, } imx274->mode_index = index; + imx274->mode = &imx274_formats[index]; if (fmt->width > IMX274_MAX_WIDTH) fmt->width = IMX274_MAX_WIDTH; @@ -1042,7 +1035,7 @@ static int imx274_s_stream(struct v4l2_subdev *sd, int on) if (on) { /* load mode registers */ - ret = imx274_mode_regs(imx274, imx274->mode_index); + ret = imx274_mode_regs(imx274); if (ret) goto fail; @@ -1146,14 +1139,14 @@ static int imx274_clamp_coarse_time(struct stimx274 *priv, u32 *val, if (err) return err; - if (*frame_length < min_frame_len[priv->mode_index]) - *frame_length = min_frame_len[priv->mode_index]; + if (*frame_length < priv->mode->min_frame_len) + *frame_length = priv->mode->min_frame_len; *val = *frame_length - *val; /* convert to raw shr */ if (*val > *frame_length - IMX274_SHR_LIMIT_CONST) *val = *frame_length - IMX274_SHR_LIMIT_CONST; - else if (*val < min_SHR[priv->mode_index]) - *val = min_SHR[priv->mode_index]; + else if (*val < priv->mode->min_SHR) + *val = priv->mode->min_SHR; return 0; } @@ -1365,7 +1358,7 @@ static int imx274_set_exposure(struct stimx274 *priv, int val) } coarse_time = (IMX274_PIXCLK_CONST1 / IMX274_PIXCLK_CONST2 * val - - nocpiop[priv->mode_index]) / hmax; + - priv->mode->nocpiop) / hmax; /* step 2: convert exposure_time into SHR value */ @@ -1375,7 +1368,7 @@ static int imx274_set_exposure(struct stimx274 *priv, int val) goto fail; priv->ctrls.exposure->val = - (coarse_time * hmax + nocpiop[priv->mode_index]) + (coarse_time * hmax + priv->mode->nocpiop) / (IMX274_PIXCLK_CONST1 / IMX274_PIXCLK_CONST2); dev_dbg(&priv->client->dev, @@ -1529,10 +1522,9 @@ static int imx274_set_frame_interval(struct stimx274 *priv, / frame_interval.numerator); /* boundary check */ - if (req_frame_rate > max_frame_rate[priv->mode_index]) { + if (req_frame_rate > priv->mode->max_fps) { frame_interval.numerator = 1; - frame_interval.denominator = - max_frame_rate[priv->mode_index]; + frame_interval.denominator = priv->mode->max_fps; } else if (req_frame_rate < IMX274_MIN_FRAME_RATE) { frame_interval.numerator = 1; frame_interval.denominator = IMX274_MIN_FRAME_RATE; @@ -1634,8 +1626,9 @@ static int imx274_probe(struct i2c_client *client, /* initialize format */ imx274->mode_index = IMX274_MODE_3840X2160; - imx274->format.width = imx274_formats[0].size.width; - imx274->format.height = imx274_formats[0].size.height; + imx274->mode = &imx274_formats[imx274->mode_index]; + imx274->format.width = imx274->mode->size.width; + imx274->format.height = imx274->mode->size.height; imx274->format.field = V4L2_FIELD_NONE; imx274->format.code = MEDIA_BUS_FMT_SRGGB10_1X10; imx274->format.colorspace = V4L2_COLORSPACE_SRGB; -- 2.7.4