From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean-Jacques Hiblot Date: Fri, 25 May 2018 15:51:54 +0200 Subject: [U-Boot] [PATCH v6 11/11] board: ti: am57xx: remove USB platform code In-Reply-To: <1527256314-31951-1-git-send-email-jjhiblot@ti.com> References: <1527256314-31951-1-git-send-email-jjhiblot@ti.com> Message-ID: <1527256314-31951-12-git-send-email-jjhiblot@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Jean-Jacques Hiblot --- Changes in v6: - Supports DM USB for peripherals - Removed DTS changes that disabled USB1 on DRA7 because DM_USB_DEV is now supported Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None board/ti/am57xx/board.c | 87 ------------------------------------------------- 1 file changed, 87 deletions(-) diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index 828a36c..00b8a79 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -883,93 +883,6 @@ int spl_start_uboot(void) } #endif -#ifdef CONFIG_USB_DWC3 -static struct dwc3_device usb_otg_ss2 = { - .maximum_speed = USB_SPEED_HIGH, - .base = DRA7_USB_OTG_SS2_BASE, - .tx_fifo_resize = false, - .index = 1, -}; - -static struct dwc3_omap_device usb_otg_ss2_glue = { - .base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE, - .utmi_mode = DWC3_OMAP_UTMI_MODE_SW, - .index = 1, -}; - -static struct ti_usb_phy_device usb_phy2_device = { - .usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER, - .index = 1, -}; - -int usb_gadget_handle_interrupts(int index) -{ - u32 status; - - status = dwc3_omap_uboot_interrupt_status(index); - if (status) - dwc3_uboot_handle_interrupt(index); - - return 0; -} -#endif /* CONFIG_USB_DWC3 */ - -#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) -int board_usb_init(int index, enum usb_init_type init) -{ - enable_usb_clocks(index); - switch (index) { - case 0: - if (init == USB_INIT_DEVICE) { - printf("port %d can't be used as device\n", index); - disable_usb_clocks(index); - return -EINVAL; - } - break; - case 1: - if (init == USB_INIT_DEVICE) { -#ifdef CONFIG_USB_DWC3 - usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL; - usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID; - ti_usb_phy_uboot_init(&usb_phy2_device); - dwc3_omap_uboot_init(&usb_otg_ss2_glue); - dwc3_uboot_init(&usb_otg_ss2); -#endif - } else { - printf("port %d can't be used as host\n", index); - disable_usb_clocks(index); - return -EINVAL; - } - - break; - default: - printf("Invalid Controller Index\n"); - } - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ -#ifdef CONFIG_USB_DWC3 - switch (index) { - case 0: - case 1: - if (init == USB_INIT_DEVICE) { - ti_usb_phy_uboot_exit(index); - dwc3_uboot_exit(index); - dwc3_omap_uboot_exit(index); - } - break; - default: - printf("Invalid Controller Index\n"); - } -#endif - disable_usb_clocks(index); - return 0; -} -#endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */ - #ifdef CONFIG_DRIVER_TI_CPSW /* Delay value to add to calibrated value */ -- 2.7.4