Patch "powerpc/powernv: Use the security flags in pnv_setup_rfi_flush()" has been added to the 4.9-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    powerpc/powernv: Use the security flags in pnv_setup_rfi_flush()

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     powerpc-powernv-use-the-security-flags-in-pnv_setup_rfi_flush.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From foo@baz Sat Jun  2 15:29:05 CEST 2018
From: Michael Ellerman <mpe@ellerman.id.au>
Date: Sat,  2 Jun 2018 21:09:00 +1000
Subject: powerpc/powernv: Use the security flags in pnv_setup_rfi_flush()
To: gregkh@linuxfoundation.org
Cc: stable@vger.kernel.org, linuxppc-dev@ozlabs.org
Message-ID: <20180602110908.29773-16-mpe@ellerman.id.au>

From: Michael Ellerman <mpe@ellerman.id.au>

commit 37c0bdd00d3ae83369ab60a6712c28e11e6458d5 upstream.

Now that we have the security flags we can significantly simplify the
code in pnv_setup_rfi_flush(), because we can use the flags instead of
checking device tree properties and because the security flags have
pessimistic defaults.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/powerpc/platforms/powernv/setup.c |   41 ++++++++-------------------------
 1 file changed, 10 insertions(+), 31 deletions(-)

--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -65,7 +65,7 @@ static void init_fw_feat_flags(struct de
 	if (fw_feature_is("enabled", "fw-bcctrl-serialized", np))
 		security_ftr_set(SEC_FTR_BCCTRL_SERIALISED);
 
-	if (fw_feature_is("enabled", "inst-spec-barrier-ori31,31,0", np))
+	if (fw_feature_is("enabled", "inst-l1d-flush-ori30,30,0", np))
 		security_ftr_set(SEC_FTR_L1D_FLUSH_ORI30);
 
 	if (fw_feature_is("enabled", "inst-l1d-flush-trig2", np))
@@ -98,11 +98,10 @@ static void pnv_setup_rfi_flush(void)
 {
 	struct device_node *np, *fw_features;
 	enum l1d_flush_type type;
-	int enable;
+	bool enable;
 
 	/* Default to fallback in case fw-features are not available */
 	type = L1D_FLUSH_FALLBACK;
-	enable = 1;
 
 	np = of_find_node_by_name(NULL, "ibm,opal");
 	fw_features = of_get_child_by_name(np, "fw-features");
@@ -110,40 +109,20 @@ static void pnv_setup_rfi_flush(void)
 
 	if (fw_features) {
 		init_fw_feat_flags(fw_features);
+		of_node_put(fw_features);
 
-		np = of_get_child_by_name(fw_features, "inst-l1d-flush-trig2");
-		if (np && of_property_read_bool(np, "enabled"))
+		if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_TRIG2))
 			type = L1D_FLUSH_MTTRIG;
 
-		of_node_put(np);
-
-		np = of_get_child_by_name(fw_features, "inst-l1d-flush-ori30,30,0");
-		if (np && of_property_read_bool(np, "enabled"))
+		if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_ORI30))
 			type = L1D_FLUSH_ORI;
-
-		of_node_put(np);
-
-		/* Enable unless firmware says NOT to */
-		enable = 2;
-		np = of_get_child_by_name(fw_features, "needs-l1d-flush-msr-hv-1-to-0");
-		if (np && of_property_read_bool(np, "disabled"))
-			enable--;
-
-		of_node_put(np);
-
-		np = of_get_child_by_name(fw_features, "needs-l1d-flush-msr-pr-0-to-1");
-		if (np && of_property_read_bool(np, "disabled"))
-			enable--;
-
-		np = of_get_child_by_name(fw_features, "speculation-policy-favor-security");
-		if (np && of_property_read_bool(np, "disabled"))
-			enable = 0;
-
-		of_node_put(np);
-		of_node_put(fw_features);
 	}
 
-	setup_rfi_flush(type, enable > 0);
+	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \
+		 (security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR)   || \
+		  security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV));
+
+	setup_rfi_flush(type, enable);
 }
 
 static void __init pnv_setup_arch(void)


Patches currently in stable-queue which might be from mpe@ellerman.id.au are

queue-4.9/powerpc-64s-clear-pcr-on-boot.patch
queue-4.9/powerpc-rfi-flush-differentiate-enabled-and-patched-flush-types.patch
queue-4.9/powerpc-64s-fix-section-mismatch-warnings-from-setup_rfi_flush.patch
queue-4.9/powerpc-pseries-fix-clearing-of-security-feature-flags.patch
queue-4.9/powerpc-powernv-set-or-clear-security-feature-flags.patch
queue-4.9/powerpc-64s-move-cpu_show_meltdown.patch
queue-4.9/powerpc-rfi-flush-call-setup_rfi_flush-after-lpm-migration.patch
queue-4.9/powerpc-pseries-set-or-clear-security-feature-flags.patch
queue-4.9/powerpc-rfi-flush-make-it-possible-to-call-setup_rfi_flush-again.patch
queue-4.9/powerpc-move-default-security-feature-flags.patch
queue-4.9/powerpc-powernv-use-the-security-flags-in-pnv_setup_rfi_flush.patch
queue-4.9/powerpc-add-security-feature-flags-for-spectre-meltdown.patch
queue-4.9/powerpc-pseries-use-the-security-flags-in-pseries_setup_rfi_flush.patch
queue-4.9/powerpc-64s-enhance-the-information-in-cpu_show_meltdown.patch
queue-4.9/powerpc-rfi-flush-move-out-of-hardlockup_detector-ifdef.patch
queue-4.9/powerpc-rfi-flush-always-enable-fallback-flush-on-pseries.patch
queue-4.9/powerpc-rfi-flush-move-the-logic-to-avoid-a-redo-into-the-debugfs-code.patch
queue-4.9/powerpc-pseries-restore-default-security-feature-flags-on-setup.patch
queue-4.9/powerpc-pseries-add-new-h_get_cpu_characteristics-flags.patch
queue-4.9/powerpc-64s-add-support-for-a-store-forwarding-barrier-at-kernel-entry-exit.patch
queue-4.9/powerpc-64s-wire-up-cpu_show_spectre_v1.patch
queue-4.9/powerpc-powernv-support-firmware-disable-of-rfi-flush.patch
queue-4.9/powerpc-pseries-support-firmware-disable-of-rfi-flush.patch
queue-4.9/powerpc-64s-wire-up-cpu_show_spectre_v2.patch