All of lore.kernel.org
 help / color / mirror / Atom feed
From: Arun Parameswaran <arun.parameswaran@broadcom.com>
To: Florian Fainelli <f.fainelli@gmail.com>,
	Vivien Didelot <vivien.didelot@savoirfairelinux.com>,
	Andrew Lunn <andrew@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com,
	Arun Parameswaran <arun.parameswaran@broadcom.com>
Subject: [PATCH 1/1] net: dsa: b53: Fix for brcm tag issue in Cygnus SoC
Date: Tue,  5 Jun 2018 13:38:12 -0700	[thread overview]
Message-ID: <1528231092-31472-1-git-send-email-arun.parameswaran@broadcom.com> (raw)

In the Broadcom Cygnus SoC, the brcm tag needs to be inserted
in between the mac address and the ether type (should use
'DSA_PROTO_TAG_BRCM') for the packets sent to the internal
b53 switch.

Since the Cygnus was added with the BCM58XX device id and the
BCM58XX uses 'DSA_PROTO_TAG_BRCM_PREPEND', the data path is
broken, due to the incorrect brcm tag location.

Add a new b53 device id (BCM583XX) for Cygnus family to fix the
issue. Add the new device id to the BCM58XX family as Cygnus
is similar to the BCM58XX in most other functionalities.

Fixes: 11606039604c ("net: dsa: b53: Support prepended Broadcom tags")

Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
---
 drivers/net/dsa/b53/b53_common.c | 15 ++++++++++++++-
 drivers/net/dsa/b53/b53_priv.h   |  2 ++
 drivers/net/dsa/b53/b53_srab.c   |  4 ++--
 3 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 3da5fca..bbc6cc6 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -684,7 +684,8 @@ static int b53_switch_reset(struct b53_device *dev)
 	 * still use this driver as a library and need to perform the reset
 	 * earlier.
 	 */
-	if (dev->chip_id == BCM58XX_DEVICE_ID) {
+	if (dev->chip_id == BCM58XX_DEVICE_ID ||
+	    dev->chip_id == BCM583XX_DEVICE_ID) {
 		b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
 		reg |= SW_RST | EN_SW_RST | EN_CH_RST;
 		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
@@ -1880,6 +1881,18 @@ struct b53_chip_data {
 		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
 	},
 	{
+		.chip_id = BCM583XX_DEVICE_ID,
+		.dev_name = "BCM583xx/11360",
+		.vlans = 4096,
+		.enabled_ports = 0x103,
+		.arl_entries = 4,
+		.cpu_port = B53_CPU_PORT,
+		.vta_regs = B53_VTA_REGS,
+		.duplex_reg = B53_DUPLEX_STAT_GE,
+		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+		.jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+	},
+	{
 		.chip_id = BCM7445_DEVICE_ID,
 		.dev_name = "BCM7445",
 		.vlans	= 4096,
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 3b57f47..b232aaa 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -62,6 +62,7 @@ enum {
 	BCM53018_DEVICE_ID = 0x53018,
 	BCM53019_DEVICE_ID = 0x53019,
 	BCM58XX_DEVICE_ID = 0x5800,
+	BCM583XX_DEVICE_ID = 0x58300,
 	BCM7445_DEVICE_ID = 0x7445,
 	BCM7278_DEVICE_ID = 0x7278,
 };
@@ -181,6 +182,7 @@ static inline int is5301x(struct b53_device *dev)
 static inline int is58xx(struct b53_device *dev)
 {
 	return dev->chip_id == BCM58XX_DEVICE_ID ||
+		dev->chip_id == BCM583XX_DEVICE_ID ||
 		dev->chip_id == BCM7445_DEVICE_ID ||
 		dev->chip_id == BCM7278_DEVICE_ID;
 }
diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
index c37ffd1..8247481 100644
--- a/drivers/net/dsa/b53/b53_srab.c
+++ b/drivers/net/dsa/b53/b53_srab.c
@@ -364,7 +364,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
 	{ .compatible = "brcm,bcm53018-srab" },
 	{ .compatible = "brcm,bcm53019-srab" },
 	{ .compatible = "brcm,bcm5301x-srab" },
-	{ .compatible = "brcm,bcm11360-srab", .data = (void *)BCM58XX_DEVICE_ID },
+	{ .compatible = "brcm,bcm11360-srab", .data = (void *)BCM583XX_DEVICE_ID },
 	{ .compatible = "brcm,bcm58522-srab", .data = (void *)BCM58XX_DEVICE_ID },
 	{ .compatible = "brcm,bcm58525-srab", .data = (void *)BCM58XX_DEVICE_ID },
 	{ .compatible = "brcm,bcm58535-srab", .data = (void *)BCM58XX_DEVICE_ID },
@@ -372,7 +372,7 @@ static int b53_srab_write64(struct b53_device *dev, u8 page, u8 reg,
 	{ .compatible = "brcm,bcm58623-srab", .data = (void *)BCM58XX_DEVICE_ID },
 	{ .compatible = "brcm,bcm58625-srab", .data = (void *)BCM58XX_DEVICE_ID },
 	{ .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID },
-	{ .compatible = "brcm,cygnus-srab", .data = (void *)BCM58XX_DEVICE_ID },
+	{ .compatible = "brcm,cygnus-srab", .data = (void *)BCM583XX_DEVICE_ID },
 	{ .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID },
 	{ /* sentinel */ },
 };
-- 
1.9.1

             reply	other threads:[~2018-06-05 20:37 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-05 20:38 Arun Parameswaran [this message]
2018-06-05 20:55 ` [PATCH 1/1] net: dsa: b53: Fix for brcm tag issue in Cygnus SoC Scott Branden
2018-06-06  8:32   ` Clément Péron
2018-06-05 21:41 ` Florian Fainelli
2018-06-06 17:48   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1528231092-31472-1-git-send-email-arun.parameswaran@broadcom.com \
    --to=arun.parameswaran@broadcom.com \
    --cc=andrew@lunn.ch \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=vivien.didelot@savoirfairelinux.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.