All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sravanthi Kollukuduru <skolluku-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: Sravanthi Kollukuduru
	<skolluku-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	Jeykumar Sankaran
	<jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
	robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	hoegsberg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org
Subject: [DPU PATCH v2 08/14] drm/msm/dpu: avoid querying for hw intf before assignment
Date: Mon, 18 Jun 2018 19:02:46 +0530	[thread overview]
Message-ID: <1529328772-5022-9-git-send-email-skolluku@codeaurora.org> (raw)
In-Reply-To: <1529328772-5022-1-git-send-email-skolluku-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>

From: Jeykumar Sankaran <jsanka@codeaurora.org>

hw intf blocks are needed only during encoder enable to program
timing engines(for video panels). encoder->enable is triggered
only after atomic_modeset at which point we assign the
resources for the display pipeline. This patch defers the
hw_intf look-up until encoder enable.

changes in v2:
     - none

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
---
 .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c   | 53 +++++++---------------
 1 file changed, 16 insertions(+), 37 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index f0b5762..3adc491 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -468,7 +468,7 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
 {
 	struct msm_drm_private *priv;
 	struct dpu_encoder_phys_vid *vid_enc;
-	struct dpu_hw_intf *intf;
+	struct dpu_rm_hw_iter iter;
 	struct dpu_hw_ctl *ctl;
 	u32 flush_mask = 0;
 
@@ -480,11 +480,20 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
 	priv = phys_enc->parent->dev->dev_private;
 
 	vid_enc = to_dpu_encoder_phys_vid(phys_enc);
-	intf = vid_enc->hw_intf;
 	ctl = phys_enc->hw_ctl;
-	if (!vid_enc->hw_intf || !phys_enc->hw_ctl) {
-		DPU_ERROR("invalid hw_intf %d hw_ctl %d\n",
-				vid_enc->hw_intf != 0, phys_enc->hw_ctl != 0);
+
+	dpu_rm_init_hw_iter(&iter, phys_enc->parent->base.id, DPU_HW_BLK_INTF);
+	while (dpu_rm_get_hw(&phys_enc->dpu_kms->rm, &iter)) {
+		struct dpu_hw_intf *hw_intf = (struct dpu_hw_intf *)iter.hw;
+
+		if (hw_intf->idx == phys_enc->intf_idx) {
+			vid_enc->hw_intf = hw_intf;
+			break;
+		}
+	}
+
+	if (!vid_enc->hw_intf) {
+		DPU_ERROR("hw_intf not assigned\n");
 		return;
 	}
 
@@ -506,7 +515,7 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
 		!dpu_encoder_phys_vid_is_master(phys_enc))
 		goto skip_flush;
 
-	ctl->ops.get_bitmask_intf(ctl, &flush_mask, intf->idx);
+	ctl->ops.get_bitmask_intf(ctl, &flush_mask, vid_enc->hw_intf->idx);
 	ctl->ops.update_pending_flush(ctl, flush_mask);
 
 skip_flush:
@@ -537,22 +546,13 @@ static void dpu_encoder_phys_vid_get_hw_resources(
 		struct dpu_encoder_hw_resources *hw_res,
 		struct drm_connector_state *conn_state)
 {
-	struct dpu_encoder_phys_vid *vid_enc;
-
 	if (!phys_enc || !hw_res) {
 		DPU_ERROR("invalid arg(s), enc %d hw_res %d conn_state %d\n",
 				phys_enc != 0, hw_res != 0, conn_state != 0);
 		return;
 	}
 
-	vid_enc = to_dpu_encoder_phys_vid(phys_enc);
-	if (!vid_enc->hw_intf) {
-		DPU_ERROR("invalid arg(s), hw_intf\n");
-		return;
-	}
-
-	DPU_DEBUG_VIDENC(vid_enc, "\n");
-	hw_res->intfs[vid_enc->hw_intf->idx - INTF_0] = INTF_MODE_VIDEO;
+	hw_res->intfs[phys_enc->intf_idx - INTF_0] = INTF_MODE_VIDEO;
 }
 
 static int _dpu_encoder_phys_vid_wait_for_vblank(
@@ -815,7 +815,6 @@ struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
 {
 	struct dpu_encoder_phys *phys_enc = NULL;
 	struct dpu_encoder_phys_vid *vid_enc = NULL;
-	struct dpu_rm_hw_iter iter;
 	struct dpu_encoder_irq *irq;
 	int i, ret = 0;
 
@@ -835,26 +834,6 @@ struct dpu_encoder_phys *dpu_encoder_phys_vid_init(
 	phys_enc->hw_mdptop = p->dpu_kms->hw_mdp;
 	phys_enc->intf_idx = p->intf_idx;
 
-	/**
-	 * hw_intf resource permanently assigned to this encoder
-	 * Other resources allocated at atomic commit time by use case
-	 */
-	dpu_rm_init_hw_iter(&iter, 0, DPU_HW_BLK_INTF);
-	while (dpu_rm_get_hw(&p->dpu_kms->rm, &iter)) {
-		struct dpu_hw_intf *hw_intf = (struct dpu_hw_intf *)iter.hw;
-
-		if (hw_intf->idx == p->intf_idx) {
-			vid_enc->hw_intf = hw_intf;
-			break;
-		}
-	}
-
-	if (!vid_enc->hw_intf) {
-		ret = -EINVAL;
-		DPU_ERROR("failed to get hw_intf\n");
-		goto fail;
-	}
-
 	DPU_DEBUG_VIDENC(vid_enc, "\n");
 
 	dpu_encoder_phys_vid_init_ops(&phys_enc->ops);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno

  parent reply	other threads:[~2018-06-18 13:32 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-18 13:32 [DPU PATCH v2 00/14] Atomic resource management Sravanthi Kollukuduru
     [not found] ` <1529328772-5022-1-git-send-email-skolluku-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-06-18 13:32   ` [DPU PATCH v2 01/14] drm/msm/dpu: remove scalar config definitions Sravanthi Kollukuduru
2018-06-18 13:32   ` [DPU PATCH v2 02/14] drm/msm/dpu: remove resource pool manager Sravanthi Kollukuduru
2018-06-18 13:32   ` [DPU PATCH v2 03/14] drm/msm/dpu: remove ping pong split topology variables Sravanthi Kollukuduru
2018-06-18 13:32   ` [DPU PATCH v2 04/14] drm/msm/dpu: program master-slave encoders explicitly Sravanthi Kollukuduru
2018-06-18 13:32   ` [DPU PATCH v2 05/14] drm/msm/dpu: use kms stored hw mdp block Sravanthi Kollukuduru
2018-06-18 13:32   ` [DPU PATCH v2 06/14] drm/msm/dpu: remove stale encoder code Sravanthi Kollukuduru
2018-06-18 13:32   ` [DPU PATCH v2 07/14] drm/msm/dpu: iterate for assigned hw ctl in virtual encoder Sravanthi Kollukuduru
2018-06-18 13:32   ` Sravanthi Kollukuduru [this message]
2018-06-18 13:32   ` [DPU PATCH v2 09/14] drm/msm/dpu: move hw resource tracking to crtc state Sravanthi Kollukuduru
2018-06-18 13:32   ` [DPU PATCH v2 10/14] drm/msm/dpu: rename hw_ctl to lm_ctl Sravanthi Kollukuduru
2018-06-18 13:32   ` [DPU PATCH v2 11/14] drm/msm/dpu: remove topology name Sravanthi Kollukuduru
2018-06-18 13:32   ` [DPU PATCH v2 12/14] drm/msm/dpu: remove display H_TILE from encoder Sravanthi Kollukuduru
2018-06-18 13:32   ` [DPU PATCH v2 13/14] drm/msm/dpu: add atomic private object to dpu kms Sravanthi Kollukuduru
2018-06-18 13:32   ` [DPU PATCH v2 14/14] drm/msm/dpu: use private obj to track hw resources Sravanthi Kollukuduru

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1529328772-5022-9-git-send-email-skolluku@codeaurora.org \
    --to=skolluku-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
    --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=freedreno-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=hoegsberg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    --cc=jsanka-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=robdclark-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.