From: Todor Tomov <todor.tomov@linaro.org>
To: mchehab@kernel.org, sakari.ailus@linux.intel.com,
hans.verkuil@cisco.com,
laurent.pinchart+renesas@ideasonboard.com,
linux-media@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Todor Tomov <todor.tomov@linaro.org>
Subject: [PATCH v2 27/34] media: camss: vfe: Add support for UYVY output from VFE on 8x96
Date: Thu, 5 Jul 2018 16:32:58 +0300 [thread overview]
Message-ID: <1530797585-8555-28-git-send-email-todor.tomov@linaro.org> (raw)
In-Reply-To: <1530797585-8555-1-git-send-email-todor.tomov@linaro.org>
Add support to output UYVY formats from the VFE (via the PIX interface).
A configuration for the realign module in the VFE is added. As the
realign module is present on 8x96 but not on 8x16, this is supported
on 8x96 only.
Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
---
drivers/media/platform/qcom/camss/camss-vfe-4-1.c | 6 +
drivers/media/platform/qcom/camss/camss-vfe-4-7.c | 129 ++++++++++++++++++----
drivers/media/platform/qcom/camss/camss-vfe.c | 31 +++++-
drivers/media/platform/qcom/camss/camss-vfe.h | 2 +
drivers/media/platform/qcom/camss/camss-video.c | 8 ++
5 files changed, 152 insertions(+), 24 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
index 41184dc..da3a9fe 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-1.c
@@ -542,6 +542,11 @@ static void vfe_set_xbar_cfg(struct vfe_device *vfe, struct vfe_output *output,
}
}
+static void vfe_set_realign_cfg(struct vfe_device *vfe, struct vfe_line *line,
+ u8 enable)
+{
+ /* empty */
+}
static void vfe_set_rdi_cid(struct vfe_device *vfe, enum vfe_line_id id, u8 cid)
{
vfe_reg_clr(vfe, VFE_0_RDI_CFG_x(id),
@@ -989,6 +994,7 @@ const struct vfe_hw_ops vfe_ops_4_1 = {
.wm_set_subsample = vfe_wm_set_subsample,
.bus_disconnect_wm_from_rdi = vfe_bus_disconnect_wm_from_rdi,
.set_xbar_cfg = vfe_set_xbar_cfg,
+ .set_realign_cfg = vfe_set_realign_cfg,
.set_rdi_cid = vfe_set_rdi_cid,
.reg_update = vfe_reg_update,
.reg_update_clear = vfe_reg_update_clear,
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
index 45e6711..4c584bf 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe-4-7.c
@@ -34,6 +34,7 @@
#define VFE_0_MODULE_ZOOM_EN 0x04c
#define VFE_0_MODULE_ZOOM_EN_SCALE_ENC BIT(1)
#define VFE_0_MODULE_ZOOM_EN_CROP_ENC BIT(2)
+#define VFE_0_MODULE_ZOOM_EN_REALIGN_BUF BIT(9)
#define VFE_0_CORE_CFG 0x050
#define VFE_0_CORE_CFG_PIXEL_PATTERN_YCBYCR 0x4
@@ -87,6 +88,9 @@
#define VFE_0_BUS_XBAR_CFG_x(x) (0x90 + 0x4 * ((x) / 2))
#define VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_EN BIT(2)
+#define VFE_0_BUS_XBAR_CFG_x_M_REALIGN_BUF_EN BIT(3)
+#define VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTRA (0x1 << 4)
+#define VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTER (0x2 << 4)
#define VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTER_INTRA (0x3 << 4)
#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT 8
#define VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_LUMA 0x0
@@ -221,6 +225,11 @@
#define VFE_0_CLAMP_ENC_MIN_CFG_CH1 (0x0 << 8)
#define VFE_0_CLAMP_ENC_MIN_CFG_CH2 (0x0 << 16)
+#define VFE_0_REALIGN_BUF_CFG 0xaac
+#define VFE_0_REALIGN_BUF_CFG_CB_ODD_PIXEL BIT(2)
+#define VFE_0_REALIGN_BUF_CFG_CR_ODD_PIXEL BIT(3)
+#define VFE_0_REALIGN_BUF_CFG_HSUB_ENABLE BIT(4)
+
#define CAMIF_TIMEOUT_SLEEP_US 1000
#define CAMIF_TIMEOUT_ALL_US 1000000
@@ -311,7 +320,7 @@ static void vfe_wm_frame_based(struct vfe_device *vfe, u8 wm, u8 enable)
#define CALC_WORD(width, M, N) (((width) * (M) + (N) - 1) / (N))
-static int vfe_word_per_line(u32 format, u32 pixel_per_line)
+static int vfe_word_per_line_by_pixel(u32 format, u32 pixel_per_line)
{
int val = 0;
@@ -333,6 +342,11 @@ static int vfe_word_per_line(u32 format, u32 pixel_per_line)
return val;
}
+static int vfe_word_per_line_by_bytes(u32 bytes_per_line)
+{
+ return CALC_WORD(bytes_per_line, 1, 8);
+}
+
static void vfe_get_wm_sizes(struct v4l2_pix_format_mplane *pix, u8 plane,
u16 *width, u16 *height, u16 *bytesperline)
{
@@ -351,6 +365,15 @@ static void vfe_get_wm_sizes(struct v4l2_pix_format_mplane *pix, u8 plane,
*height = pix->height;
*bytesperline = pix->plane_fmt[0].bytesperline;
break;
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_YVYU:
+ case V4L2_PIX_FMT_VYUY:
+ case V4L2_PIX_FMT_UYVY:
+ *width = pix->width;
+ *height = pix->height;
+ *bytesperline = pix->plane_fmt[plane].bytesperline;
+ break;
+
}
}
@@ -365,7 +388,7 @@ static void vfe_wm_line_based(struct vfe_device *vfe, u32 wm,
vfe_get_wm_sizes(pix, plane, &width, &height, &bytesperline);
- wpl = vfe_word_per_line(pix->pixelformat, width);
+ wpl = vfe_word_per_line_by_pixel(pix->pixelformat, width);
reg = height - 1;
reg |= ((wpl + 3) / 4 - 1) << 16;
@@ -373,7 +396,7 @@ static void vfe_wm_line_based(struct vfe_device *vfe, u32 wm,
writel_relaxed(reg, vfe->base +
VFE_0_BUS_IMAGE_MASTER_n_WR_IMAGE_SIZE(wm));
- wpl = vfe_word_per_line(pix->pixelformat, bytesperline);
+ wpl = vfe_word_per_line_by_bytes(bytesperline);
reg = 0x3;
reg |= (height - 1) << 2;
@@ -536,32 +559,97 @@ static void vfe_set_xbar_cfg(struct vfe_device *vfe, struct vfe_output *output,
struct vfe_line *line = container_of(output, struct vfe_line, output);
u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
u32 reg;
- unsigned int i;
- for (i = 0; i < output->wm_num; i++) {
- if (i == 0) {
- reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_LUMA <<
- VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
- } else if (i == 1) {
- reg = VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_EN;
- if (p == V4L2_PIX_FMT_NV12 || p == V4L2_PIX_FMT_NV16)
- reg |= VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTER_INTRA;
- }
+ switch (p) {
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_NV21:
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_NV61:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_LUMA <<
+ VFE_0_BUS_XBAR_CFG_x_M_SINGLE_STREAM_SEL_SHIFT;
+
+ if (output->wm_idx[0] % 2 == 1)
+ reg <<= 16;
+
+ if (enable)
+ vfe_reg_set(vfe,
+ VFE_0_BUS_XBAR_CFG_x(output->wm_idx[0]),
+ reg);
+ else
+ vfe_reg_clr(vfe,
+ VFE_0_BUS_XBAR_CFG_x(output->wm_idx[0]),
+ reg);
+
+ reg = VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_EN;
+ if (p == V4L2_PIX_FMT_NV12 || p == V4L2_PIX_FMT_NV16)
+ reg |= VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTER_INTRA;
+
+ if (output->wm_idx[1] % 2 == 1)
+ reg <<= 16;
- if (output->wm_idx[i] % 2 == 1)
+ if (enable)
+ vfe_reg_set(vfe,
+ VFE_0_BUS_XBAR_CFG_x(output->wm_idx[1]),
+ reg);
+ else
+ vfe_reg_clr(vfe,
+ VFE_0_BUS_XBAR_CFG_x(output->wm_idx[1]),
+ reg);
+ break;
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_YVYU:
+ case V4L2_PIX_FMT_VYUY:
+ case V4L2_PIX_FMT_UYVY:
+ reg = VFE_0_BUS_XBAR_CFG_x_M_REALIGN_BUF_EN;
+ reg |= VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_EN;
+
+ if (p == V4L2_PIX_FMT_YUYV || p == V4L2_PIX_FMT_YVYU)
+ reg |= VFE_0_BUS_XBAR_CFG_x_M_PAIR_STREAM_SWAP_INTER_INTRA;
+
+ if (output->wm_idx[0] % 2 == 1)
reg <<= 16;
if (enable)
vfe_reg_set(vfe,
- VFE_0_BUS_XBAR_CFG_x(output->wm_idx[i]),
+ VFE_0_BUS_XBAR_CFG_x(output->wm_idx[0]),
reg);
else
vfe_reg_clr(vfe,
- VFE_0_BUS_XBAR_CFG_x(output->wm_idx[i]),
+ VFE_0_BUS_XBAR_CFG_x(output->wm_idx[0]),
reg);
+ break;
+ default:
+ break;
}
}
+static void vfe_set_realign_cfg(struct vfe_device *vfe, struct vfe_line *line,
+ u8 enable)
+{
+ u32 p = line->video_out.active_fmt.fmt.pix_mp.pixelformat;
+ u32 val = VFE_0_MODULE_ZOOM_EN_REALIGN_BUF;
+
+ if (p != V4L2_PIX_FMT_YUYV && p != V4L2_PIX_FMT_YVYU &&
+ p != V4L2_PIX_FMT_VYUY && p != V4L2_PIX_FMT_UYVY)
+ return;
+
+ if (enable) {
+ vfe_reg_set(vfe, VFE_0_MODULE_ZOOM_EN, val);
+ } else {
+ vfe_reg_clr(vfe, VFE_0_MODULE_ZOOM_EN, val);
+ return;
+ }
+
+ val = VFE_0_REALIGN_BUF_CFG_HSUB_ENABLE;
+
+ if (p == V4L2_PIX_FMT_UYVY || p == V4L2_PIX_FMT_YUYV)
+ val |= VFE_0_REALIGN_BUF_CFG_CR_ODD_PIXEL;
+ else
+ val |= VFE_0_REALIGN_BUF_CFG_CB_ODD_PIXEL;
+
+ writel_relaxed(val, vfe->base + VFE_0_REALIGN_BUF_CFG);
+}
+
static void vfe_set_rdi_cid(struct vfe_device *vfe, enum vfe_line_id id, u8 cid)
{
vfe_reg_clr(vfe, VFE_0_RDI_CFG_x(id),
@@ -911,11 +999,11 @@ static void vfe_set_module_cfg(struct vfe_device *vfe, u8 enable)
VFE_0_MODULE_ZOOM_EN_CROP_ENC;
if (enable) {
- writel_relaxed(val_lens, vfe->base + VFE_0_MODULE_LENS_EN);
- writel_relaxed(val_zoom, vfe->base + VFE_0_MODULE_ZOOM_EN);
+ vfe_reg_set(vfe, VFE_0_MODULE_LENS_EN, val_lens);
+ vfe_reg_set(vfe, VFE_0_MODULE_ZOOM_EN, val_zoom);
} else {
- writel_relaxed(0x0, vfe->base + VFE_0_MODULE_LENS_EN);
- writel_relaxed(0x0, vfe->base + VFE_0_MODULE_ZOOM_EN);
+ vfe_reg_clr(vfe, VFE_0_MODULE_LENS_EN, val_lens);
+ vfe_reg_clr(vfe, VFE_0_MODULE_ZOOM_EN, val_zoom);
}
}
@@ -1028,6 +1116,7 @@ const struct vfe_hw_ops vfe_ops_4_7 = {
.wm_set_subsample = vfe_wm_set_subsample,
.bus_disconnect_wm_from_rdi = vfe_bus_disconnect_wm_from_rdi,
.set_xbar_cfg = vfe_set_xbar_cfg,
+ .set_realign_cfg = vfe_set_realign_cfg,
.set_rdi_cid = vfe_set_rdi_cid,
.reg_update = vfe_reg_update,
.reg_update_clear = vfe_reg_update_clear,
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index b3d2cbf..314eed9 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -206,6 +206,9 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
{
u32 src_code[] = {
MEDIA_BUS_FMT_YUYV8_2X8,
+ MEDIA_BUS_FMT_YVYU8_2X8,
+ MEDIA_BUS_FMT_UYVY8_2X8,
+ MEDIA_BUS_FMT_VYUY8_2X8,
MEDIA_BUS_FMT_YUYV8_1_5X8,
};
@@ -216,6 +219,9 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
{
u32 src_code[] = {
MEDIA_BUS_FMT_YVYU8_2X8,
+ MEDIA_BUS_FMT_YUYV8_2X8,
+ MEDIA_BUS_FMT_UYVY8_2X8,
+ MEDIA_BUS_FMT_VYUY8_2X8,
MEDIA_BUS_FMT_YVYU8_1_5X8,
};
@@ -226,6 +232,9 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
{
u32 src_code[] = {
MEDIA_BUS_FMT_UYVY8_2X8,
+ MEDIA_BUS_FMT_YUYV8_2X8,
+ MEDIA_BUS_FMT_YVYU8_2X8,
+ MEDIA_BUS_FMT_VYUY8_2X8,
MEDIA_BUS_FMT_UYVY8_1_5X8,
};
@@ -236,6 +245,9 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
{
u32 src_code[] = {
MEDIA_BUS_FMT_VYUY8_2X8,
+ MEDIA_BUS_FMT_YUYV8_2X8,
+ MEDIA_BUS_FMT_YVYU8_2X8,
+ MEDIA_BUS_FMT_UYVY8_2X8,
MEDIA_BUS_FMT_VYUY8_1_5X8,
};
@@ -311,10 +323,6 @@ static void vfe_init_outputs(struct vfe_device *vfe)
output->buf[0] = NULL;
output->buf[1] = NULL;
INIT_LIST_HEAD(&output->pending_bufs);
-
- output->wm_num = 1;
- if (vfe->line[i].id == VFE_LINE_PIX)
- output->wm_num = 2;
}
}
@@ -570,6 +578,7 @@ static int vfe_get_output(struct vfe_line *line)
{
struct vfe_device *vfe = to_vfe(line);
struct vfe_output *output;
+ struct v4l2_format *f = &line->video_out.active_fmt;
unsigned long flags;
int i;
int wm_idx;
@@ -585,6 +594,18 @@ static int vfe_get_output(struct vfe_line *line)
output->active_buf = 0;
+ switch (f->fmt.pix_mp.pixelformat) {
+ case V4L2_PIX_FMT_NV12:
+ case V4L2_PIX_FMT_NV21:
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_NV61:
+ output->wm_num = 2;
+ break;
+ default:
+ output->wm_num = 1;
+ break;
+ }
+
for (i = 0; i < output->wm_num; i++) {
wm_idx = vfe_reserve_wm(vfe, line->id);
if (wm_idx < 0) {
@@ -715,6 +736,7 @@ static int vfe_enable_output(struct vfe_line *line)
ops->enable_irq_pix_line(vfe, 0, line->id, 1);
ops->set_module_cfg(vfe, 1);
ops->set_camif_cfg(vfe, line);
+ ops->set_realign_cfg(vfe, line, 1);
ops->set_xbar_cfg(vfe, output, 1);
ops->set_demux_cfg(vfe, line);
ops->set_scale_cfg(vfe, line);
@@ -779,6 +801,7 @@ static int vfe_disable_output(struct vfe_line *line)
ops->enable_irq_pix_line(vfe, 0, line->id, 0);
ops->set_module_cfg(vfe, 0);
+ ops->set_realign_cfg(vfe, line, 0);
ops->set_xbar_cfg(vfe, output, 0);
ops->set_camif_cmd(vfe, 0);
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index 764b734..5dcc37f 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -107,6 +107,8 @@ struct vfe_hw_ops {
u8 enable);
void (*set_rdi_cid)(struct vfe_device *vfe, enum vfe_line_id id,
u8 cid);
+ void (*set_realign_cfg)(struct vfe_device *vfe, struct vfe_line *line,
+ u8 enable);
void (*reg_update)(struct vfe_device *vfe, enum vfe_line_id line_id);
void (*reg_update_clear)(struct vfe_device *vfe,
enum vfe_line_id line_id);
diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
index ba7d0c4..e6e114a 100644
--- a/drivers/media/platform/qcom/camss/camss-video.c
+++ b/drivers/media/platform/qcom/camss/camss-video.c
@@ -179,6 +179,14 @@ static const struct camss_format_info formats_pix_8x96[] = {
{ { 1, 1 } }, { { 1, 2 } }, { 8 } },
{ MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_NV61, 1,
{ { 1, 1 } }, { { 1, 2 } }, { 8 } },
+ { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_UYVY, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_VYUY, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_YUYV, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+ { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_YVYU, 1,
+ { { 1, 1 } }, { { 1, 1 } }, { 16 } },
};
/* -----------------------------------------------------------------------------
--
2.7.4
next prev parent reply other threads:[~2018-07-05 13:35 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-05 13:32 [PATCH v2 00/34] Qualcomm Camera Subsystem driver - 8x96 support Todor Tomov
2018-07-05 13:32 ` [PATCH v2 01/34] doc-rst: Add packed Bayer raw14 pixel formats Todor Tomov
2018-07-05 13:32 ` [PATCH v2 02/34] media: v4l: Add new 2X8 10-bit grayscale media bus code Todor Tomov
2018-07-05 13:32 ` [PATCH v2 03/34] media: v4l: Add new 10-bit packed grayscale format Todor Tomov
2018-07-05 13:32 ` [PATCH v2 04/34] media: Rename CAMSS driver path Todor Tomov
2018-07-05 13:32 ` [PATCH v2 05/34] media: camss: Use SPDX license headers Todor Tomov
2018-07-05 13:32 ` [PATCH v2 06/34] media: camss: Fix OF node usage Todor Tomov
2018-07-05 13:32 ` [PATCH v2 07/34] media: camss: csiphy: Ensure clock mux config is done before the rest Todor Tomov
2018-07-05 13:32 ` [PATCH v2 08/34] media: camss: Unify the clock names Todor Tomov
2018-07-11 16:07 ` Rob Herring
2018-07-16 8:53 ` Todor Tomov
2018-07-16 14:00 ` Rob Herring
2018-07-05 13:32 ` [PATCH v2 09/34] media: camss: csiphy: Update settle count calculation Todor Tomov
2018-07-05 13:32 ` [PATCH v2 10/34] media: camss: csid: Configure data type and decode format properly Todor Tomov
2018-07-05 13:32 ` [PATCH v2 11/34] media: camss: vfe: Fix to_vfe() macro member name Todor Tomov
2018-07-05 13:32 ` [PATCH v2 12/34] media: camss: vfe: Get line pointer as container of video_out Todor Tomov
2018-07-05 13:32 ` [PATCH v2 13/34] media: camss: vfe: Do not disable CAMIF when clearing its status Todor Tomov
2018-07-05 13:32 ` [PATCH v2 14/34] media: dt-bindings: media: qcom,camss: Fix whitespaces Todor Tomov
2018-07-05 13:32 ` [PATCH v2 15/34] media: dt-bindings: media: qcom,camss: Add 8996 bindings Todor Tomov
2018-07-05 13:32 ` [PATCH v2 16/34] media: camss: Add 8x96 resources Todor Tomov
2018-07-05 13:32 ` [PATCH v2 17/34] media: camss: Add basic runtime PM support Todor Tomov
2018-07-05 13:32 ` [PATCH v2 18/34] media: camss: csiphy: Split to hardware dependent and independent parts Todor Tomov
2018-07-05 13:32 ` [PATCH v2 19/34] media: camss: csiphy: Unify lane handling Todor Tomov
2018-07-05 13:32 ` [PATCH v2 20/34] media: camss: csiphy: Add support for 8x96 Todor Tomov
2018-07-05 13:32 ` [PATCH v2 21/34] media: camss: csid: " Todor Tomov
2018-07-05 13:32 ` [PATCH v2 22/34] media: camss: ispif: " Todor Tomov
2018-07-05 13:32 ` [PATCH v2 23/34] media: camss: vfe: Split to hardware dependent and independent parts Todor Tomov
2018-07-05 13:32 ` [PATCH v2 24/34] media: camss: vfe: Add support for 8x96 Todor Tomov
2018-07-05 13:32 ` [PATCH v2 25/34] media: camss: Format configuration per hardware version Todor Tomov
2018-07-05 13:32 ` [PATCH v2 26/34] media: camss: vfe: Different format support on source pad Todor Tomov
2018-07-05 13:32 ` Todor Tomov [this message]
2018-07-05 13:32 ` [PATCH v2 28/34] media: camss: csid: " Todor Tomov
2018-07-05 13:33 ` [PATCH v2 29/34] media: camss: csid: MIPI10 to Plain16 format conversion Todor Tomov
2018-07-05 13:33 ` [PATCH v2 30/34] media: camss: Add support for RAW MIPI14 on 8x96 Todor Tomov
2018-07-05 13:33 ` [PATCH v2 31/34] media: camss: Add support for 10-bit grayscale formats Todor Tomov
2018-07-05 13:33 ` [PATCH v2 32/34] media: doc: media/v4l-drivers: Update Qualcomm CAMSS driver document for 8x96 Todor Tomov
2018-07-05 13:33 ` [PATCH v2 33/34] media: camss: csid: Add support for events triggered by user controls Todor Tomov
2018-07-05 13:33 ` [PATCH v2 34/34] media: v4l2-ioctl: Add format descriptions for packed Bayer raw14 pixel formats Todor Tomov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1530797585-8555-28-git-send-email-todor.tomov@linaro.org \
--to=todor.tomov@linaro.org \
--cc=hans.verkuil@cisco.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.