* [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU
@ 2018-07-19 12:54 Stefan Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 01/40] target/mips: Add preprocessor constants for nanoMIPS Stefan Markovic
` (39 more replies)
0 siblings, 40 replies; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Aleksandar Markovic <amarkovic@wavecomp.com>
v2->v3:
- added support for nanoMIPS-specifics in ELF headers
- added support for CP0 Config0.WR bit
- updated I7200 definition
- improved indentation of some switch statements
- slight reorganization of patches (splitting, order)
- rebased to the latest code
v1->v2:
- added DSP ASE support
- added MT ASE support
- added GDB XML support
- order of patches changed
- commit messages and patch title improved accross the board
- obsolete email addresses for authors and cosigners replaced
with the right ones
- some functions renamed to reflect better the documentation
- some macros renamed to reflect better their nanoMIPS nature
- streamlined formatting
- some of other reviewer's comments addressed, but the majority
was not; this is because the focus of this version was on
completing the functionality as much as possible; remaining
comments will be addressed in the subsequent versions of this
series
This series of patches implements recently announced nanoMIPS on QEMU.
nanoMIPS is a variable length ISA containing 16, 32 and 48-bit wide
instructions. It is designed to be portable at assembly level with
other MIPS and microMIPS code, but contains a number of changes that
enhance code density and efficiency. The largest portion of patches
is nanoMIPS decoding engine.
For more information, please refer to the following link:
https://www.mips.com/products/architectures/nanomips/
Aleksandar Markovic (4):
target/mips: Add preprocessor constants for nanoMIPS
elf: Add nanoMIPS specific variations in ELF header fields
elf: Relax MIPS' elf_check_arch() to accept EM_NANOMIPS too
linux-user: Don't check FCR31_NAN2008 bit for nanoMIPS
James Hogan (5):
target/mips: Implement emulation of nanoMIPS EXTW instruction
target/mips: Adjust exception_resume_pc() for nanoMIPS
target/mips: Adjust set_hflags_for_handler() for nanoMIPS
target/mips: Adjust set_pc() for nanoMIPS
gdbstub: Disable handling of nanoMIPS ISA bit in the MIPS gdbstub
Matthew Fortune (3):
target/mips: Implement emulation of nanoMIPS ROTX instruction
target/mips: Add handling of branch delay slots for nanoMIPS
mips_malta: Add basic nanoMIPS boot code for MIPS' Malta
Paul Burton (1):
mips_malta: Setup GT64120 BARs in nanoMIPS bootloader
Stefan Markovic (8):
target/mips: Add nanoMIPS DSP ASE opcodes
target/mips: Implement MT ASE support for nanoMIPS
target/mips: Implement DSP ASE support for nanoMIPS
target/mips: Add updating CP0 BadInstrX register for nanoMIPs only
target/mips: Implement CP0 Config0.WR bit functionality
mips_malta: Fix semihosting argument passing for nanoMIPS bare metal
gdbstub: Add XML support for GDB for nanoMIPS
target/mips: Add definition of nanoMIPS I7200 CPU
Yongbok Kim (19):
target/mips: Add nanoMIPS base instruction set opcodes
target/mips: Add decode_nanomips_opc() function
target/mips: Add nanoMIPS decoding and extraction utilities
target/mips: Add emulation of misc nanoMIPS 16-bit instructions
target/mips: Add emulation of nanoMIPS 16-bit load and store
instructions
target/mips: Add emulation of nanoMIPS 16-bit logic instructions
target/mips: Add emulation of nanoMIPS 16-bit save and restore
instructions
target/mips: Add emulation of some common nanoMIPS 32-bit instructions
target/mips: Add emulation of nanoMIPS 48-bit instructions
target/mips: Add emulation of nanoMIPS FP instructions
target/mips: Add emulation of misc nanoMIPS instructions (pool32a0)
target/mips: Add emulation of misc nanoMIPS instructions (pool32axf)
target/mips: Add emulation of misc nanoMIPS instructions (pool p_lsx)
target/mips: Add emulation of nanoMIPS 32-bit load and store
instructions
target/mips: Add emulation of nanoMIPS branch instructions
target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair
target/mips: Add updating BadInstr and BadInstrP registers for
nanoMIPS
target/mips: Adjust behavior of Config3's ISAOnExc bit for nanoMIPS
target/mips: Fix ERET/ERETNC behavior related to ADEL exception
MAINTAINERS | 3 +-
gdb-xml/nanomips-cp0.xml | 13 +
gdb-xml/nanomips-cpu.xml | 44 +
gdb-xml/nanomips-dsp.xml | 20 +
gdb-xml/nanomips-fpu.xml | 45 +
gdb-xml/nanomips-linux.xml | 20 +
hw/mips/mips_malta.c | 153 +-
include/elf.h | 20 +
linux-user/elfload.c | 2 +
linux-user/mips/cpu_loop.c | 28 +-
target/mips/cpu.h | 2 +
target/mips/gdbstub.c | 13 +-
target/mips/helper.c | 47 +-
target/mips/helper.h | 4 +
target/mips/mips-defs.h | 4 +
target/mips/op_helper.c | 147 +-
target/mips/translate.c | 7305 ++++++++++++++++++++++++++++++--------
target/mips/translate_init.inc.c | 40 +
18 files changed, 6474 insertions(+), 1436 deletions(-)
create mode 100644 gdb-xml/nanomips-cp0.xml
create mode 100644 gdb-xml/nanomips-cpu.xml
create mode 100644 gdb-xml/nanomips-dsp.xml
create mode 100644 gdb-xml/nanomips-fpu.xml
create mode 100644 gdb-xml/nanomips-linux.xml
--
2.7.4
^ permalink raw reply [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 01/40] target/mips: Add preprocessor constants for nanoMIPS
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 02/40] target/mips: Add nanoMIPS base instruction set opcodes Stefan Markovic
` (38 subsequent siblings)
39 siblings, 0 replies; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Aleksandar Markovic <amarkovic@wavecomp.com>
Add ISA_NANOMIPS32 and CPU_NANOMIPS32 preprocessor constants.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/mips-defs.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/target/mips/mips-defs.h b/target/mips/mips-defs.h
index d239069..c8e9979 100644
--- a/target/mips/mips-defs.h
+++ b/target/mips/mips-defs.h
@@ -39,6 +39,7 @@
#define ISA_MIPS64R5 0x00001000
#define ISA_MIPS32R6 0x00002000
#define ISA_MIPS64R6 0x00004000
+#define ISA_NANOMIPS32 0x00008000
/* MIPS ASEs. */
#define ASE_MIPS16 0x00010000
@@ -87,6 +88,9 @@
#define CPU_MIPS32R6 (CPU_MIPS32R5 | ISA_MIPS32R6)
#define CPU_MIPS64R6 (CPU_MIPS64R5 | CPU_MIPS32R6 | ISA_MIPS64R6)
+/* Wave Computing: "nanoMIPS" */
+#define CPU_NANOMIPS32 (CPU_MIPS32R6 | ISA_NANOMIPS32)
+
/* Strictly follow the architecture standard:
- Disallow "special" instruction handling for PMON/SPIM.
Note that we still maintain Count/Compare to match the host clock. */
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 02/40] target/mips: Add nanoMIPS base instruction set opcodes
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 01/40] target/mips: Add preprocessor constants for nanoMIPS Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 03/40] target/mips: Add nanoMIPS DSP ASE opcodes Stefan Markovic
` (37 subsequent siblings)
39 siblings, 0 replies; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add nanoMIPS opcodes. nanoMIPS instruction are organized by so-called
instruction pools. Each pool contains a set of opcodes, that in turn
can be instruction opcodes or instruction pool opcodes.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/translate.c | 670 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 670 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index de0d55b..6a99a61 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -15644,6 +15644,676 @@ static int decode_micromips_opc (CPUMIPSState *env, DisasContext *ctx)
return 2;
}
+/*
+ *
+ * nanoMIPS opcodes
+ *
+ */
+
+/* MAJOR, P16, and P32 pools opcodes */
+enum {
+ NM_P_ADDIU = 0x00,
+ NM_ADDIUPC = 0x01,
+ NM_MOVE_BALC = 0x02,
+ NM_P16_MV = 0x04,
+ NM_LW16 = 0x05,
+ NM_BC16 = 0x06,
+ NM_P16_SR = 0x07,
+
+ NM_POOL32A = 0x08,
+ NM_P_BAL = 0x0a,
+ NM_P16_SHIFT = 0x0c,
+ NM_LWSP16 = 0x0d,
+ NM_BALC16 = 0x0e,
+ NM_P16_4X4 = 0x0f,
+
+ NM_P_GP_W = 0x10,
+ NM_P_GP_BH = 0x11,
+ NM_P_J = 0x12,
+ NM_P16C = 0x14,
+ NM_LWGP16 = 0x15,
+ NM_P16_LB = 0x17,
+
+ NM_P48I = 0x18,
+ NM_P16_A1 = 0x1c,
+ NM_LW4X4 = 0x1d,
+ NM_P16_LH = 0x1f,
+
+ NM_P_U12 = 0x20,
+ NM_P_LS_U12 = 0x21,
+ NM_P_BR1 = 0x22,
+ NM_P16_A2 = 0x24,
+ NM_SW16 = 0x25,
+ NM_BEQZC16 = 0x26,
+
+ NM_POOL32F = 0x28,
+ NM_P_LS_S9 = 0x29,
+ NM_P_BR2 = 0x2a,
+
+ NM_P16_ADDU = 0x2c,
+ NM_SWSP16 = 0x2d,
+ NM_BNEZC16 = 0x2e,
+ NM_MOVEP = 0x2f,
+
+ NM_POOL32S = 0x30,
+ NM_P_BRI = 0x32,
+ NM_LI16 = 0x34,
+ NM_SWGP16 = 0x35,
+ NM_P16_BR = 0x36,
+
+ NM_P_LUI = 0x38,
+ NM_ANDI16 = 0x3c,
+ NM_SW4X4 = 0x3d,
+ NM_MOVEPREV = 0x3f,
+};
+
+/* POOL32A instruction pool */
+enum {
+ NM_POOL32A0 = 0x00,
+ NM_SPECIAL2 = 0x01,
+ NM_COP2_1 = 0x02,
+ NM_UDI = 0x03,
+ NM_POOL32A5 = 0x05,
+ NM_POOL32A7 = 0x07,
+};
+
+/* P.GP.W instruction pool */
+enum {
+ NM_ADDIUGP_W = 0x00,
+ NM_LWGP = 0x02,
+ NM_SWGP = 0x03,
+};
+
+/* P48I instruction pool */
+enum {
+ NM_LI48 = 0x00,
+ NM_ADDIU48 = 0x01,
+ NM_ADDIUGP48 = 0x02,
+ NM_ADDIUPC48 = 0x03,
+ NM_LWPC48 = 0x0b,
+ NM_SWPC48 = 0x0f,
+};
+
+/* P.U12 instruction pool */
+enum {
+ NM_ORI = 0x00,
+ NM_XORI = 0x01,
+ NM_ANDI = 0x02,
+ NM_P_SR = 0x03,
+ NM_SLTI = 0x04,
+ NM_SLTIU = 0x05,
+ NM_SEQI = 0x06,
+ NM_ADDIUNEG = 0x08,
+ NM_P_SHIFT = 0x0c,
+ NM_P_ROTX = 0x0d,
+ NM_P_INS = 0x0e,
+ NM_P_EXT = 0x0f,
+};
+
+/* POOL32F instruction pool */
+enum {
+ NM_POOL32F_0 = 0x00,
+ NM_POOL32F_3 = 0x03,
+ NM_POOL32F_5 = 0x05,
+};
+
+/* POOL32S instruction pool */
+enum {
+ NM_POOL32S_0 = 0x00,
+ NM_POOL32S_4 = 0x04,
+};
+
+/* P.LUI instruction pool */
+enum {
+ NM_LUI = 0x00,
+ NM_ALUIPC = 0x01,
+};
+
+/* P.GP.BH instruction pool */
+enum {
+ NM_LBGP = 0x00,
+ NM_SBGP = 0x01,
+ NM_LBUGP = 0x02,
+ NM_ADDIUGP_B = 0x03,
+ NM_P_GP_LH = 0x04,
+ NM_P_GP_SH = 0x05,
+ NM_P_GP_CP1 = 0x06,
+};
+
+/* P.LS.U12 instruction pool */
+enum {
+ NM_LB = 0x00,
+ NM_SB = 0x01,
+ NM_LBU = 0x02,
+ NM_P_PREFU12 = 0x03,
+ NM_LH = 0x04,
+ NM_SH = 0x05,
+ NM_LHU = 0x06,
+ NM_LWU = 0x07,
+ NM_LW = 0x08,
+ NM_SW = 0x09,
+ NM_LWC1 = 0x0a,
+ NM_SWC1 = 0x0b,
+ NM_LDC1 = 0x0e,
+ NM_SDC1 = 0x0f,
+};
+
+/* P.LS.S9 instruction pool */
+enum {
+ NM_P_LS_S0 = 0x00,
+ NM_P_LS_S1 = 0x01,
+ NM_P_LS_E0 = 0x02,
+ NM_P_LS_WM = 0x04,
+ NM_P_LS_UAWM = 0x05,
+};
+
+/* P.BAL instruction pool */
+enum {
+ NM_BC = 0x00,
+ NM_BALC = 0x01,
+};
+
+/* P.J instruction pool */
+enum {
+ NM_JALRC = 0x00,
+ NM_JALRC_HB = 0x01,
+ NM_P_BALRSC = 0x08,
+};
+
+/* P.BR1 instruction pool */
+enum {
+ NM_BEQC = 0x00,
+ NM_P_BR3A = 0x01,
+ NM_BGEC = 0x02,
+ NM_BGEUC = 0x03,
+};
+
+/* P.BR2 instruction pool */
+enum {
+ NM_BNEC = 0x00,
+ NM_BLTC = 0x02,
+ NM_BLTUC = 0x03,
+};
+
+/* P.BRI instruction pool */
+enum {
+ NM_BEQIC = 0x00,
+ NM_BBEQZC = 0x01,
+ NM_BGEIC = 0x02,
+ NM_BGEIUC = 0x03,
+ NM_BNEIC = 0x04,
+ NM_BBNEZC = 0x05,
+ NM_BLTIC = 0x06,
+ NM_BLTIUC = 0x07,
+};
+
+/* P16.SHIFT instruction pool */
+enum {
+ NM_SLL16 = 0x00,
+ NM_SRL16 = 0x01,
+};
+
+/* POOL16C instruction pool */
+enum {
+ NM_POOL16C_0 = 0x00,
+ NM_LWXS16 = 0x01,
+};
+
+/* P16.A1 instruction pool */
+enum {
+ NM_ADDIUR1SP = 0x01,
+};
+
+/* P16.A2 instruction pool */
+enum {
+ NM_ADDIUR2 = 0x00,
+ NM_P_ADDIURS5 = 0x01,
+};
+
+/* P16.ADDU instruction pool */
+enum {
+ NM_ADDU16 = 0x00,
+ NM_SUBU16 = 0x01,
+};
+
+/* P16.SR instruction pool */
+enum {
+ NM_SAVE16 = 0x00,
+ NM_RESTORE_JRC16 = 0x01,
+};
+
+/* P16.4X4 instruction pool */
+enum {
+ NM_ADDU4X4 = 0x00,
+ NM_MUL4X4 = 0x01,
+};
+
+/* P16.LB instruction pool */
+enum {
+ NM_LB16 = 0x00,
+ NM_SB16 = 0x01,
+ NM_LBU16 = 0x02,
+};
+
+/* P16.LH instruction pool */
+enum {
+ NM_LH16 = 0x00,
+ NM_SH16 = 0x01,
+ NM_LHU16 = 0x02,
+};
+
+/* P.RI instruction pool */
+enum {
+ NM_SIGRIE = 0x00,
+ NM_P_SYSCALL = 0x01,
+ NM_BREAK = 0x02,
+ NM_SDBBP = 0x03,
+};
+
+/* POOL32A0 instruction pool */
+enum {
+ NM_P_TRAP = 0x00,
+ NM_SEB = 0x01,
+ NM_SLLV = 0x02,
+ NM_MUL = 0x03,
+ NM_MFC0 = 0x06,
+ NM_MFHC0 = 0x07,
+ NM_SEH = 0x09,
+ NM_SRLV = 0x0a,
+ NM_MUH = 0x0b,
+ NM_MTC0 = 0x0e,
+ NM_MTHC0 = 0x0f,
+ NM_SRAV = 0x12,
+ NM_MULU = 0x13,
+ NM_ROTRV = 0x1a,
+ NM_MUHU = 0x1b,
+ NM_ADD = 0x22,
+ NM_DIV = 0x23,
+ NM_ADDU = 0x2a,
+ NM_MOD = 0x2b,
+ NM_SUB = 0x32,
+ NM_DIVU = 0x33,
+ NM_RDHWR = 0x38,
+ NM_SUBU = 0x3a,
+ NM_MODU = 0x3b,
+ NM_P_CMOVE = 0x42,
+ NM_FORK = 0x45,
+ NM_MFTR = 0x46,
+ NM_MFHTR = 0x47,
+ NM_AND = 0x4a,
+ NM_YIELD = 0x4d,
+ NM_MTTR = 0x4e,
+ NM_MTHTR = 0x4f,
+ NM_OR = 0x52,
+ NM_D_E_MT_VPE = 0x56,
+ NM_NOR = 0x5a,
+ NM_XOR = 0x62,
+ NM_SLT = 0x6a,
+ NM_P_SLTU = 0x72,
+ NM_SOV = 0x7a,
+};
+
+/* POOL32A7 instruction pool */
+enum {
+ NM_P_LSX = 0x00,
+ NM_LSA = 0x01,
+ NM_EXTW = 0x03,
+ NM_POOL32AXF = 0x07,
+};
+
+/* P.SR instruction pool */
+enum {
+ NM_PP_SR = 0x00,
+ NM_P_SR_F = 0x01,
+};
+
+/* P.SHIFT instruction pool */
+enum {
+ NM_P_SLL = 0x00,
+ NM_SRL = 0x02,
+ NM_SRA = 0x04,
+ NM_ROTR = 0x06,
+};
+
+/* P.ROTX instruction pool */
+enum {
+ NM_ROTX = 0x00,
+};
+
+/* P.INS instruction pool */
+enum {
+ NM_INS = 0x00,
+};
+
+/* P.EXT instruction pool */
+enum {
+ NM_EXT = 0x00,
+};
+
+/* POOL32F_0 (fmt) instruction pool */
+enum {
+ NM_RINT_S = 0x04,
+ NM_RINT_D = 0x44,
+ NM_ADD_S = 0x06,
+ NM_SELEQZ_S = 0x07,
+ NM_SELEQZ_D = 0x47,
+ NM_CLASS_S = 0x0c,
+ NM_CLASS_D = 0x4c,
+ NM_SUB_S = 0x0e,
+ NM_SELNEZ_S = 0x0f,
+ NM_SELNEZ_D = 0x4f,
+ NM_MUL_S = 0x16,
+ NM_SEL_S = 0x17,
+ NM_SEL_D = 0x57,
+ NM_DIV_S = 0x1e,
+ NM_ADD_D = 0x26,
+ NM_SUB_D = 0x2e,
+ NM_MUL_D = 0x36,
+ NM_MADDF_S = 0x37,
+ NM_MADDF_D = 0x77,
+ NM_DIV_D = 0x3e,
+ NM_MSUBF_S = 0x3f,
+ NM_MSUBF_D = 0x7f,
+};
+
+/* POOL32F_3 instruction pool */
+enum {
+ NM_MIN_FMT = 0x00,
+ NM_MAX_FMT = 0x01,
+ NM_MINA_FMT = 0x04,
+ NM_MAXA_FMT = 0x05,
+ NM_POOL32FXF = 0x07,
+};
+
+/* POOL32F_5 instruction pool */
+enum {
+ NM_CMP_CONDN_S = 0x00,
+ NM_CMP_CONDN_D = 0x02,
+};
+
+/* P.GP.LH instruction pool */
+enum {
+ NM_LHGP = 0x00,
+ NM_LHUGP = 0x01,
+};
+
+/* P.GP.SH instruction pool */
+enum {
+ NM_SHGP = 0x00,
+};
+
+/* P.GP.CP1 instruction pool */
+enum {
+ NM_LWC1GP = 0x00,
+ NM_SWC1GP = 0x01,
+ NM_LDC1GP = 0x02,
+ NM_SDC1GP = 0x03,
+};
+
+/* P.LS.S0 instruction pool */
+enum {
+ NM_LBS9 = 0x00,
+ NM_LHS9 = 0x04,
+ NM_LWS9 = 0x08,
+ NM_LDS9 = 0x0c,
+
+ NM_SBS9 = 0x01,
+ NM_SHS9 = 0x05,
+ NM_SWS9 = 0x09,
+ NM_SDS9 = 0x0d,
+
+ NM_LBUS9 = 0x02,
+ NM_LHUS9 = 0x06,
+ NM_LWC1S9 = 0x0a,
+ NM_LDC1S9 = 0x0e,
+
+ NM_P_PREFS9 = 0x03,
+ NM_LWUS9 = 0x07,
+ NM_SWC1S9 = 0x0b,
+ NM_SDC1S9 = 0x0f,
+};
+
+/* P.LS.S1 instruction pool */
+enum {
+ NM_ASET_ACLR = 0x02,
+ NM_UALH = 0x04,
+ NM_UASH = 0x05,
+ NM_CACHE = 0x07,
+ NM_P_LL = 0x0a,
+ NM_P_SC = 0x0b,
+};
+
+/* P.LS.WM instruction pool */
+enum {
+ NM_LWM = 0x00,
+ NM_SWM = 0x01,
+};
+
+/* P.LS.UAWM instruction pool */
+enum {
+ NM_UALWM = 0x00,
+ NM_UASWM = 0x01,
+};
+
+/* P.BR3A instruction pool */
+enum {
+ NM_BC1EQZC = 0x00,
+ NM_BC1NEZC = 0x01,
+ NM_BC2EQZC = 0x02,
+ NM_BC2NEZC = 0x03,
+ NM_BPOSGE32C = 0x04,
+};
+
+/* P16.RI instruction pool */
+enum {
+ NM_P16_SYSCALL = 0x01,
+ NM_BREAK16 = 0x02,
+ NM_SDBBP16 = 0x03,
+};
+
+/* POOL16C_0 instruction pool */
+enum {
+ NM_POOL16C_00 = 0x00,
+};
+
+/* P16.JRC instruction pool */
+enum {
+ NM_JRC = 0x00,
+ NM_JALRC16 = 0x01,
+};
+
+/* P.SYSCALL instruction pool */
+enum {
+ NM_SYSCALL = 0x00,
+ NM_HYPCALL = 0x01,
+};
+
+/* P.TRAP instruction pool */
+enum {
+ NM_TEQ = 0x00,
+ NM_TNE = 0x01,
+};
+
+/* P.CMOVE instruction pool */
+enum {
+ NM_MOVZ = 0x00,
+ NM_MOVN = 0x01,
+};
+
+/* POOL32Axf instruction pool */
+enum {
+ NM_POOL32AXF_4 = 0x04,
+ NM_POOL32AXF_5 = 0x05,
+};
+
+/* POOL32Axf_{4, 5} instruction pool */
+enum {
+ NM_CLO = 0x25,
+ NM_CLZ = 0x2d,
+
+ NM_TLBP = 0x01,
+ NM_TLBR = 0x09,
+ NM_TLBWI = 0x11,
+ NM_TLBWR = 0x19,
+ NM_TLBINV = 0x03,
+ NM_TLBINVF = 0x0b,
+ NM_DI = 0x23,
+ NM_EI = 0x2b,
+ NM_RDPGPR = 0x70,
+ NM_WRPGPR = 0x78,
+ NM_WAIT = 0x61,
+ NM_DERET = 0x71,
+ NM_ERETX = 0x79,
+};
+
+/* PP.SR instruction pool */
+enum {
+ NM_SAVE = 0x00,
+ NM_RESTORE = 0x02,
+ NM_RESTORE_JRC = 0x03,
+};
+
+/* P.SR.F instruction pool */
+enum {
+ NM_SAVEF = 0x00,
+ NM_RESTOREF = 0x01,
+};
+
+/* P16.SYSCALL instruction pool */
+enum {
+ NM_SYSCALL16 = 0x00,
+ NM_HYPCALL16 = 0x01,
+};
+
+/* POOL16C_00 instruction pool */
+enum {
+ NM_NOT16 = 0x00,
+ NM_XOR16 = 0x01,
+ NM_AND16 = 0x02,
+ NM_OR16 = 0x03,
+};
+
+/* PP.LSX and PP.LSXS instruction pool */
+enum {
+ NM_LBX = 0x00,
+ NM_LHX = 0x04,
+ NM_LWX = 0x08,
+ NM_LDX = 0x0c,
+
+ NM_SBX = 0x01,
+ NM_SHX = 0x05,
+ NM_SWX = 0x09,
+ NM_SDX = 0x0d,
+
+ NM_LBUX = 0x02,
+ NM_LHUX = 0x06,
+ NM_LWC1X = 0x0a,
+ NM_LDC1X = 0x0e,
+
+ NM_LWUX = 0x07,
+ NM_SWC1X = 0x0b,
+ NM_SDC1X = 0x0f,
+
+ NM_LHXS = 0x04,
+ NM_LWXS = 0x08,
+ NM_LDXS = 0x0c,
+
+ NM_SHXS = 0x05,
+ NM_SWXS = 0x09,
+ NM_SDXS = 0x0d,
+
+ NM_LHUXS = 0x06,
+ NM_LWC1XS = 0x0a,
+ NM_LDC1XS = 0x0e,
+
+ NM_LWUXS = 0x07,
+ NM_SWC1XS = 0x0b,
+ NM_SDC1XS = 0x0f,
+};
+
+/* ERETx instruction pool */
+enum {
+ NM_ERET = 0x00,
+ NM_ERETNC = 0x01,
+};
+
+/* POOL32FxF_{0, 1} insturction pool */
+enum {
+ NM_CFC1 = 0x40,
+ NM_CTC1 = 0x60,
+ NM_MFC1 = 0x80,
+ NM_MTC1 = 0xa0,
+ NM_MFHC1 = 0xc0,
+ NM_MTHC1 = 0xe0,
+
+ NM_CVT_S_PL = 0x84,
+ NM_CVT_S_PU = 0xa4,
+
+ NM_CVT_L_S = 0x004,
+ NM_CVT_L_D = 0x104,
+ NM_CVT_W_S = 0x024,
+ NM_CVT_W_D = 0x124,
+
+ NM_RSQRT_S = 0x008,
+ NM_RSQRT_D = 0x108,
+
+ NM_SQRT_S = 0x028,
+ NM_SQRT_D = 0x128,
+
+ NM_RECIP_S = 0x048,
+ NM_RECIP_D = 0x148,
+
+ NM_FLOOR_L_S = 0x00c,
+ NM_FLOOR_L_D = 0x10c,
+
+ NM_FLOOR_W_S = 0x02c,
+ NM_FLOOR_W_D = 0x12c,
+
+ NM_CEIL_L_S = 0x04c,
+ NM_CEIL_L_D = 0x14c,
+ NM_CEIL_W_S = 0x06c,
+ NM_CEIL_W_D = 0x16c,
+ NM_TRUNC_L_S = 0x08c,
+ NM_TRUNC_L_D = 0x18c,
+ NM_TRUNC_W_S = 0x0ac,
+ NM_TRUNC_W_D = 0x1ac,
+ NM_ROUND_L_S = 0x0cc,
+ NM_ROUND_L_D = 0x1cc,
+ NM_ROUND_W_S = 0x0ec,
+ NM_ROUND_W_D = 0x1ec,
+
+ NM_MOV_S = 0x01,
+ NM_MOV_D = 0x81,
+ NM_ABS_S = 0x0d,
+ NM_ABS_D = 0x8d,
+ NM_NEG_S = 0x2d,
+ NM_NEG_D = 0xad,
+ NM_CVT_D_S = 0x04d,
+ NM_CVT_D_W = 0x0cd,
+ NM_CVT_D_L = 0x14d,
+ NM_CVT_S_D = 0x06d,
+ NM_CVT_S_W = 0x0ed,
+ NM_CVT_S_L = 0x16d,
+};
+
+/* P.LL instruction pool */
+enum {
+ NM_LL = 0x00,
+ NM_LLWP = 0x01,
+};
+
+/* P.SC instruction pool */
+enum {
+ NM_SC = 0x00,
+ NM_SCWP = 0x01,
+};
+
+/* P.DVP instruction pool */
+enum {
+ NM_DVP = 0x00,
+ NM_EVP = 0x01,
+};
+
/* SmartMIPS extension to MIPS32 */
#if defined(TARGET_MIPS64)
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 03/40] target/mips: Add nanoMIPS DSP ASE opcodes
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 01/40] target/mips: Add preprocessor constants for nanoMIPS Stefan Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 02/40] target/mips: Add nanoMIPS base instruction set opcodes Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 16:28 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 04/40] target/mips: Add decode_nanomips_opc() function Stefan Markovic
` (36 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Stefan Markovic <smarkovic@wavecomp.com>
Add nanoMIPS opcodes for DSP ASE instruction pools and instructions.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/translate.c | 144 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 144 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 6a99a61..227b2c0 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16142,10 +16142,154 @@ enum {
/* POOL32Axf instruction pool */
enum {
+ NM_POOL32AXF_1 = 0x01,
+ NM_POOL32AXF_2 = 0x02,
NM_POOL32AXF_4 = 0x04,
NM_POOL32AXF_5 = 0x05,
+ NM_POOL32AXF_7 = 0x07,
};
+/* POOL32Axf_1 instruction pool */
+enum {
+ NM_POOL32AXF_1_0 = 0x00,
+ NM_POOL32AXF_1_1 = 0x01,
+ NM_POOL32AXF_1_3 = 0x03,
+ NM_POOL32AXF_1_4 = 0x04,
+ NM_POOL32AXF_1_5 = 0x05,
+ NM_POOL32AXF_1_7 = 0x07,
+};
+
+/* POOL32Axf_2 instruction pool */
+enum {
+ NM_POOL32AXF_2_0_7 = 0x00,
+ NM_POOL32AXF_2_8_15 = 0x01,
+ NM_POOL32AXF_2_16_23 = 0x02,
+ NM_POOL32AXF_2_24_31 = 0x03,
+};
+
+/* POOL32Axf_{4, 5} instruction pool */
+enum {
+ /* nanoMIPS DSP instructions */
+ NM_ABSQ_S_QB = 0x00,
+ NM_ABSQ_S_PH = 0x08,
+ NM_ABSQ_S_W = 0x10,
+ NM_PRECEQ_W_PHL = 0x28,
+ NM_PRECEQ_W_PHR = 0x30,
+ NM_PRECEQU_PH_QBL = 0x38,
+ NM_PRECEQU_PH_QBR = 0x48,
+ NM_PRECEU_PH_QBL = 0x58,
+ NM_PRECEU_PH_QBR = 0x68,
+ NM_PRECEQU_PH_QBLA = 0x39,
+ NM_PRECEQU_PH_QBRA = 0x49,
+ NM_PRECEU_PH_QBLA = 0x59,
+ NM_PRECEU_PH_QBRA = 0x69,
+ NM_REPLV_PH = 0x01,
+ NM_REPLV_QB = 0x09,
+ NM_BITREV = 0x18,
+ NM_INSV = 0x20,
+ NM_RADDU_W_QB = 0x78,
+
+ NM_BITSWAP = 0x05,
+ NM_WSBH = 0x3d,
+};
+
+/* POOL32Axf_7 instruction pool */
+enum {
+ NM_SHRA_R_QB = 0x0,
+ NM_SHRL_PH = 0x1,
+ NM_REPL_QB = 0x2,
+};
+
+/* POOL32Axf_1_0 instruction pool */
+enum {
+ NM_MFHI = 0x0,
+ NM_MFLO = 0x1,
+ NM_MTHI = 0x2,
+ NM_MTLO = 0x3,
+};
+
+/* POOL32Axf_1_1 instruction pool */
+enum {
+ NM_MTHLIP = 0x0,
+ NM_SHILOV = 0x1,
+};
+
+/* POOL32Axf_1_3 instruction pool */
+enum {
+ NM_RDDSP = 0x0,
+ NM_WRDSP = 0x1,
+ NM_EXTP = 0x2,
+ NM_EXTPDP = 0x3,
+};
+
+/* POOL32Axf_1_4 instruction pool */
+enum {
+ NM_SHLL_QB = 0x0,
+ NM_SHRL_QB = 0x1,
+};
+
+/* POOL32Axf_1_5 instruction pool */
+enum {
+ NM_MAQ_S_W_PHR = 0x0,
+ NM_MAQ_S_W_PHL = 0x1,
+ NM_MAQ_SA_W_PHR = 0x2,
+ NM_MAQ_SA_W_PHL = 0x3,
+};
+
+/* POOL32Axf_1_7 instruction pool */
+enum {
+ NM_EXTR_W = 0x0,
+ NM_EXTR_R_W = 0x1,
+ NM_EXTR_RS_W = 0x2,
+ NM_EXTR_S_H = 0x3,
+};
+
+/* POOL32Axf_2_0_7 instruction pool */
+enum {
+ NM_DPA_W_PH = 0x0,
+ NM_DPAQ_S_W_PH = 0x1,
+ NM_DPS_W_PH = 0x2,
+ NM_DPSQ_S_W_PH = 0x3,
+ NM_BALIGN = 0x4,
+ NM_MADD = 0x5,
+ NM_MULT = 0x6,
+ NM_EXTRV_W = 0x7,
+};
+
+/* POOL32Axf_2_8_15 instruction pool */
+enum {
+ NM_DPAX_W_PH = 0x0,
+ NM_DPAQ_SA_L_W = 0x1,
+ NM_DPSX_W_PH = 0x2,
+ NM_DPSQ_SA_L_W = 0x3,
+ NM_MADDU = 0x5,
+ NM_MULTU = 0x6,
+ NM_EXTRV_R_W = 0x7,
+};
+
+/* POOL32Axf_2_16_23 instruction pool */
+enum {
+ NM_DPAU_H_QBL = 0x0,
+ NM_DPAQX_S_W_PH = 0x1,
+ NM_DPSU_H_QBL = 0x2,
+ NM_DPSQX_S_W_PH = 0x3,
+ NM_EXTPV = 0x4,
+ NM_MSUB = 0x5,
+ NM_MULSA_W_PH = 0x6,
+ NM_EXTRV_RS_W = 0x7,
+};
+
+/* POOL32Axf_2_24_31 instruction pool */
+enum {
+ NM_DPAU_H_QBR = 0x0,
+ NM_DPAQX_SA_W_PH = 0x1,
+ NM_DPSU_H_QBR = 0x2,
+ NM_DPSQX_SA_W_PH = 0x3,
+ NM_EXTPDPV = 0x4,
+ NM_MSUBU = 0x5,
+ NM_MULSAQ_S_W_PH = 0x6,
+ NM_EXTRV_S_H = 0x7,
+};
/* POOL32Axf_{4, 5} instruction pool */
enum {
NM_CLO = 0x25,
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 04/40] target/mips: Add decode_nanomips_opc() function
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (2 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 03/40] target/mips: Add nanoMIPS DSP ASE opcodes Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 16:39 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 05/40] target/mips: Add nanoMIPS decoding and extraction utilities Stefan Markovic
` (35 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add empty body and invocation of decode_nanomips_opc() if the bit
ISA_NANOMIPS32 is set in env->insn_flags.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/translate.c | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 227b2c0..67a0f70 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16458,6 +16458,19 @@ enum {
NM_EVP = 0x01,
};
+
+/*
+ *
+ * nanoMIPS decoding engine
+ *
+ */
+
+static int decode_nanomips_opc(CPUMIPSState *env, DisasContext *ctx)
+{
+ return 2;
+}
+
+
/* SmartMIPS extension to MIPS32 */
#if defined(TARGET_MIPS64)
@@ -21263,8 +21276,13 @@ static void mips_tr_translate_insn(DisasContextBase *dcbase, CPUState *cs)
insn_bytes = 4;
decode_opc(env, ctx);
} else if (ctx->insn_flags & ASE_MICROMIPS) {
- ctx->opcode = cpu_lduw_code(env, ctx->base.pc_next);
- insn_bytes = decode_micromips_opc(env, ctx);
+ if (env->insn_flags & ISA_NANOMIPS32) {
+ ctx->opcode = cpu_lduw_code(env, ctx->base.pc_next);
+ insn_bytes = decode_nanomips_opc(env, ctx);
+ } else {
+ ctx->opcode = cpu_lduw_code(env, ctx->base.pc_next);
+ insn_bytes = decode_micromips_opc(env, ctx);
+ }
} else if (ctx->insn_flags & ASE_MIPS16) {
ctx->opcode = cpu_lduw_code(env, ctx->base.pc_next);
insn_bytes = decode_mips16_opc(env, ctx);
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 05/40] target/mips: Add nanoMIPS decoding and extraction utilities
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (3 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 04/40] target/mips: Add decode_nanomips_opc() function Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 16:57 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 06/40] target/mips: Add emulation of misc nanoMIPS 16-bit instructions Stefan Markovic
` (34 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add some basic utility functions and macros for nanoMIPS decoding
engine.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/translate.c | 35 +++++++++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 67a0f70..4e6ae1f 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16465,6 +16465,41 @@ enum {
*
*/
+static int decode_gpr_gpr3(int r)
+{
+ static const int map[] = { 16, 17, 18, 19, 4, 5, 6, 7 };
+
+ return map[r & 0x7];
+}
+
+static int decode_gpr_gpr4(int r)
+{
+ static const int map[] = { 8, 9, 10, 11, 4, 5, 6, 7,
+ 16, 17, 18, 19, 20, 21, 22, 23 };
+
+ return map[r & 0xf];
+}
+
+/* Used for 16-bit store instructions. */
+static int decode_gpr_gpr4_zero(int r)
+{
+ static const int map[] = { 8, 9, 10, 0, 4, 5, 6, 7,
+ 16, 17, 18, 19, 20, 21, 22, 23 };
+
+ return map[r & 0xf];
+}
+
+
+/* extraction utilities */
+
+#define NANOMIPS_EXTRACT_RD(op) ((op >> 7) & 0x7)
+#define NANOMIPS_EXTRACT_RS(op) ((op >> 4) & 0x7)
+#define NANOMIPS_EXTRACT_RS2(op) uMIPS_RS(op)
+#define NANOMIPS_EXTRACT_RS1(op) ((op >> 1) & 0x7)
+#define NANOMIPS_EXTRACT_RD5(op) ((op >> 5) & 0x1f)
+#define NANOMIPS_EXTRACT_RS5(op) (op & 0x1f)
+
+
static int decode_nanomips_opc(CPUMIPSState *env, DisasContext *ctx)
{
return 2;
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 06/40] target/mips: Add emulation of misc nanoMIPS 16-bit instructions
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (4 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 05/40] target/mips: Add nanoMIPS decoding and extraction utilities Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 18:06 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 07/40] target/mips: Add emulation of nanoMIPS 16-bit load and store instructions Stefan Markovic
` (33 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add emulation of misc nanoMIPS 16-bit instructions from instruction
pools P16, P16.BR, P16.BRI, P16.4X4 and other related pools.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/translate.c | 258 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 258 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 4e6ae1f..798f977 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16502,6 +16502,264 @@ static int decode_gpr_gpr4_zero(int r)
static int decode_nanomips_opc(CPUMIPSState *env, DisasContext *ctx)
{
+ uint32_t op;
+ int rt = decode_gpr_gpr3(NANOMIPS_EXTRACT_RD(ctx->opcode));
+ int rs = decode_gpr_gpr3(NANOMIPS_EXTRACT_RS(ctx->opcode));
+ int rd = decode_gpr_gpr3(NANOMIPS_EXTRACT_RS1(ctx->opcode));
+
+ /* make sure instructions are on a halfword boundary */
+ if (ctx->base.pc_next & 0x1) {
+ env->CP0_BadVAddr = ctx->base.pc_next;
+ generate_exception_end(ctx, EXCP_AdEL);
+ return 2;
+ }
+
+ op = (ctx->opcode >> 10) & 0x3f;
+ switch (op) {
+ case NM_P16_MV:
+ {
+ int rt = NANOMIPS_EXTRACT_RD5(ctx->opcode);
+ if (rt != 0) {
+ /* MOVE */
+ int rs = NANOMIPS_EXTRACT_RS5(ctx->opcode);
+ gen_arith(ctx, OPC_ADDU, rt, rs, 0);
+ } else {
+ /* P16.RI */
+ switch ((ctx->opcode >> 3) & 0x3) {
+ case NM_P16_SYSCALL:
+ generate_exception_end(ctx, EXCP_SYSCALL);
+ break;
+ case NM_BREAK16:
+ generate_exception_end(ctx, EXCP_BREAK);
+ break;
+ case NM_SDBBP16:
+ if (is_uhi(extract32(ctx->opcode, 0, 3))) {
+ gen_helper_do_semihosting(cpu_env);
+ } else {
+ if (ctx->hflags & MIPS_HFLAG_SBRI) {
+ generate_exception_end(ctx, EXCP_RI);
+ } else {
+ generate_exception_end(ctx, EXCP_DBp);
+ }
+ }
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ }
+ }
+ break;
+ case NM_P16_SHIFT:
+ {
+ int shift = (ctx->opcode) & 0x7;
+ uint32_t opc = 0;
+ shift = (shift == 0) ? 8 : shift;
+
+ switch ((ctx->opcode >> 3) & 1) {
+ case NM_SLL16:
+ opc = OPC_SLL;
+ break;
+ case NM_SRL16:
+ opc = OPC_SRL;
+ break;
+ }
+ gen_shift_imm(ctx, opc, rt, rs, shift);
+ }
+ break;
+ case NM_P16C:
+ break;
+ case NM_P16_A1:
+ switch ((ctx->opcode >> 6) & 1) {
+ case NM_ADDIUR1SP:
+ gen_arith_imm(ctx, OPC_ADDIU, rt, 29,
+ extract32(ctx->opcode, 0, 6) << 2);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ break;
+ case NM_P16_A2:
+ switch ((ctx->opcode >> 3) & 1) {
+ case NM_ADDIUR2:
+ {
+ uint8_t u = (uint8_t) extract32(ctx->opcode, 0, 3) << 2;
+ gen_arith_imm(ctx, OPC_ADDIU, rt, rs, u);
+ }
+ break;
+ case NM_P_ADDIURS5:
+ {
+ int rt = extract32(ctx->opcode, 5, 5);
+ if (rt != 0) {
+ int s = (sextract32(ctx->opcode, 4, 1) << 3) |
+ extract32(ctx->opcode, 0, 3);
+ /* s = sign_extend( s[3] . s[2:0] , from_nbits = 4)*/
+ gen_arith_imm(ctx, OPC_ADDIU, rt, rt, s);
+ }
+ }
+ break;
+ }
+ break;
+ case NM_P16_ADDU:
+ switch (ctx->opcode & 0x1) {
+ case NM_ADDU16:
+ gen_arith(ctx, OPC_ADDU, rd, rs, rt);
+ break;
+ case NM_SUBU16:
+ gen_arith(ctx, OPC_SUBU, rd, rs, rt);
+ break;
+ }
+ break;
+ case NM_P16_4X4:
+ {
+ int rt = (extract32(ctx->opcode, 9, 1) << 3) |
+ extract32(ctx->opcode, 5, 3);
+ int rs = (extract32(ctx->opcode, 4, 1) << 3) |
+ extract32(ctx->opcode, 0, 3);
+ rt = decode_gpr_gpr4(rt);
+ rs = decode_gpr_gpr4(rs);
+
+ switch (((ctx->opcode >> 7) & 0x2) | ((ctx->opcode >> 3) & 0x1)) {
+ case NM_ADDU4X4:
+ gen_arith(ctx, OPC_ADDU, rt, rs, rt);
+ break;
+ case NM_MUL4X4:
+ gen_r6_muldiv(ctx, R6_OPC_MUL, rt, rs, rt);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ }
+ break;
+ case NM_LI16:
+ {
+ int imm = extract32(ctx->opcode, 0, 7);
+ imm = (imm == 0x7f ? -1 : imm);
+ if (rt != 0) {
+ tcg_gen_movi_tl(cpu_gpr[rt], imm);
+ }
+ }
+ break;
+ case NM_ANDI16:
+ {
+ uint32_t u = extract32(ctx->opcode, 0, 4);
+ u = (u == 12) ? 0xff :
+ (u == 13) ? 0xffff : u;
+ gen_logic_imm(ctx, OPC_ANDI, rt, rs, u);
+ }
+ break;
+ case NM_P16_LB:
+ break;
+ case NM_P16_LH:
+ break;
+ case NM_LW16:
+ break;
+ case NM_LWSP16:
+ break;
+ case NM_LW4X4:
+ break;
+ case NM_SW4X4:
+ break;
+ case NM_LWGP16:
+ break;
+ case NM_SWSP16:
+ break;
+ case NM_SW16:
+ break;
+ case NM_SWGP16:
+ break;
+ case NM_BC16:
+ gen_compute_branch(ctx, OPC_BEQ, 2, 0, 0,
+ (sextract32(ctx->opcode, 0, 1) << 10) |
+ (extract32(ctx->opcode, 1, 9) << 1),
+ 0);
+ break;
+ case NM_BALC16:
+ gen_compute_branch(ctx, OPC_BGEZAL, 2, 0, 0,
+ (sextract32(ctx->opcode, 0, 1) << 10) |
+ (extract32(ctx->opcode, 1, 9) << 1),
+ 0);
+ break;
+ case NM_BEQZC16:
+ case NM_BNEZC16:
+ gen_compute_branch(ctx, op == NM_BNEZC16 ? OPC_BNE : OPC_BEQ, 2,
+ rt, 0,
+ (sextract32(ctx->opcode, 0, 1) << 7) |
+ (extract32(ctx->opcode, 1, 6) << 1),
+ 0);
+ break;
+ case NM_P16_BR:
+ switch (ctx->opcode & 0xf) {
+ case 0:
+ /* P16.JRC */
+ switch ((ctx->opcode >> 4) & 1) {
+ case NM_JRC:
+ gen_compute_branch(ctx, OPC_JR, 2,
+ extract32(ctx->opcode, 5, 5), 0, 0, 0);
+ break;
+ case NM_JALRC16:
+ gen_compute_branch(ctx, OPC_JALR, 2,
+ extract32(ctx->opcode, 5, 5), 31, 0, 0);
+ break;
+ }
+ break;
+ default:
+ /* P16.BRI */
+ if (extract32(ctx->opcode, 4, 3) < extract32(ctx->opcode, 7, 3)) {
+ /* BEQC16 */
+ gen_compute_branch(ctx, OPC_BEQ, 2, rs, rt,
+ extract32(ctx->opcode, 0, 4) << 1, 0);
+ } else {
+ /* BNEC16 */
+ gen_compute_branch(ctx, OPC_BNE, 2, rs, rt,
+ extract32(ctx->opcode, 0, 4) << 1, 0);
+ }
+ break;
+ }
+ break;
+ case NM_P16_SR:
+ break;
+ case NM_MOVEP:
+ case NM_MOVEPREV:
+ {
+ static const int gpr2reg1[] = {4, 5, 6, 7};
+ static const int gpr2reg2[] = {5, 6, 7, 8};
+ int re;
+ int rd2 = extract32(ctx->opcode, 3, 1) << 1 |
+ extract32(ctx->opcode, 8, 1);
+ int r1 = gpr2reg1[rd2];
+ int r2 = gpr2reg2[rd2];
+ int r3 = extract32(ctx->opcode, 4, 1) << 3 |
+ extract32(ctx->opcode, 0, 3);
+ int r4 = extract32(ctx->opcode, 9, 1) << 3 |
+ extract32(ctx->opcode, 5, 3);
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+ if (op == NM_MOVEP) {
+ rd = r1;
+ re = r2;
+ rs = decode_gpr_gpr4_zero(r3);
+ rt = decode_gpr_gpr4_zero(r4);
+ } else {
+ rd = decode_gpr_gpr4(r3);
+ re = decode_gpr_gpr4(r4);
+ rs = r1;
+ rt = r2;
+ }
+ gen_load_gpr(t0, rs);
+ gen_load_gpr(t1, rt);
+ tcg_gen_mov_tl(cpu_gpr[rd], t0);
+ tcg_gen_mov_tl(cpu_gpr[re], t1);
+ tcg_temp_free(t0);
+ tcg_temp_free(t1);
+ }
+ break;
+ default:
+ break;
+ }
+
return 2;
}
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 07/40] target/mips: Add emulation of nanoMIPS 16-bit load and store instructions
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (5 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 06/40] target/mips: Add emulation of misc nanoMIPS 16-bit instructions Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 18:28 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 08/40] target/mips: Add emulation of nanoMIPS 16-bit logic instructions Stefan Markovic
` (32 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add emulation of LWXS16, LB16, SB16, LBU16, LH16, SH16, LHU16, LW16, LWSP16,
LW4X4, SW4X4, LWGP16, SWSP16, SW16, and SWGP16 instructions.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/translate.c | 114 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 114 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 798f977..1a839be 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16472,6 +16472,14 @@ static int decode_gpr_gpr3(int r)
return map[r & 0x7];
}
+/* Used for 16-bit store instructions. */
+static int decode_gpr_gpr3_src_store(int r)
+{
+ static const int map[] = { 0, 17, 18, 19, 4, 5, 6, 7 };
+
+ return map[r & 0x7];
+}
+
static int decode_gpr_gpr4(int r)
{
static const int map[] = { 8, 9, 10, 11, 4, 5, 6, 7,
@@ -16568,6 +16576,13 @@ static int decode_nanomips_opc(CPUMIPSState *env, DisasContext *ctx)
}
break;
case NM_P16C:
+ switch (ctx->opcode & 1) {
+ case NM_POOL16C_0:
+ break;
+ case NM_LWXS16:
+ gen_ldxs(ctx, rt, rs, rd);
+ break;
+ }
break;
case NM_P16_A1:
switch ((ctx->opcode >> 6) & 1) {
@@ -16651,24 +16666,123 @@ static int decode_nanomips_opc(CPUMIPSState *env, DisasContext *ctx)
}
break;
case NM_P16_LB:
+ {
+ uint32_t u = extract32(ctx->opcode, 0, 2);
+ switch (((ctx->opcode) >> 2) & 0x03) {
+ case NM_LB16:
+ gen_ld(ctx, OPC_LB, rt, rs, u);
+ break;
+ case NM_SB16:
+ {
+ int rt = decode_gpr_gpr3_src_store(
+ NANOMIPS_EXTRACT_RD(ctx->opcode));
+ gen_st(ctx, OPC_SB, rt, rs, u);
+ }
+ break;
+ case NM_LBU16:
+ gen_ld(ctx, OPC_LBU, rt, rs, u);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ }
break;
case NM_P16_LH:
+ {
+ uint32_t u = extract32(ctx->opcode, 1, 2) << 1;
+ switch ((((ctx->opcode >> 3) & 1) << 1) | (ctx->opcode & 1)) {
+ case NM_LH16:
+ gen_ld(ctx, OPC_LH, rt, rs, u);
+ break;
+ case NM_SH16:
+ {
+ int rt = decode_gpr_gpr3_src_store(
+ NANOMIPS_EXTRACT_RD(ctx->opcode));
+ gen_st(ctx, OPC_SH, rt, rs, u);
+ }
+ break;
+ case NM_LHU16:
+ gen_ld(ctx, OPC_LHU, rt, rs, u);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ }
break;
case NM_LW16:
+ {
+ int u = extract32(ctx->opcode, 0, 4) << 2;
+ gen_ld(ctx, OPC_LW, rt, rs, u);
+ }
break;
case NM_LWSP16:
+ {
+ int rt = NANOMIPS_EXTRACT_RD5(ctx->opcode);
+ int u = extract32(ctx->opcode, 0, 5) << 2;
+
+ gen_ld(ctx, OPC_LW, rt, 29, u);
+ }
break;
case NM_LW4X4:
+ {
+ int rt = (extract32(ctx->opcode, 9, 1) << 3) |
+ extract32(ctx->opcode, 5, 3);
+ int rs = (extract32(ctx->opcode, 4, 1) << 3) |
+ extract32(ctx->opcode, 0, 3);
+ int u = (extract32(ctx->opcode, 3, 1) << 3) |
+ (extract32(ctx->opcode, 8, 1) << 2);
+ rt = decode_gpr_gpr4(rt);
+ rs = decode_gpr_gpr4(rs);
+ gen_ld(ctx, OPC_LW, rt, rs, u);
+ }
break;
case NM_SW4X4:
+ {
+ int rt = (extract32(ctx->opcode, 9, 1) << 3) |
+ extract32(ctx->opcode, 5, 3);
+ int rs = (extract32(ctx->opcode, 4, 1) << 3) |
+ extract32(ctx->opcode, 0, 3);
+ int u = (extract32(ctx->opcode, 3, 1) << 3) |
+ (extract32(ctx->opcode, 8, 1) << 2);
+ rt = decode_gpr_gpr4_zero(rt);
+ rs = decode_gpr_gpr4(rs);
+ gen_st(ctx, OPC_SW, rt, rs, u);
+ }
break;
case NM_LWGP16:
+ {
+ int u = extract32(ctx->opcode, 0, 7) << 2;
+ gen_ld(ctx, OPC_LW, rt, 28, u);
+ }
break;
case NM_SWSP16:
+ {
+ int rt = NANOMIPS_EXTRACT_RD5(ctx->opcode);
+ int u = extract32(ctx->opcode, 0, 5) << 2;
+
+ gen_st(ctx, OPC_SW, rt, 29, u);
+ }
break;
case NM_SW16:
+ {
+ int rt = decode_gpr_gpr3_src_store(
+ NANOMIPS_EXTRACT_RD(ctx->opcode));
+ int rs = decode_gpr_gpr3(NANOMIPS_EXTRACT_RS(ctx->opcode));
+ int u = extract32(ctx->opcode, 0, 4) << 2;
+
+ gen_st(ctx, OPC_SW, rt, rs, u);
+ }
break;
case NM_SWGP16:
+ {
+ int rt = decode_gpr_gpr3_src_store(
+ NANOMIPS_EXTRACT_RD(ctx->opcode));
+ int u = extract32(ctx->opcode, 0, 7) << 2;
+
+ gen_st(ctx, OPC_SW, rt, 28, u);
+ }
break;
case NM_BC16:
gen_compute_branch(ctx, OPC_BEQ, 2, 0, 0,
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 08/40] target/mips: Add emulation of nanoMIPS 16-bit logic instructions
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (6 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 07/40] target/mips: Add emulation of nanoMIPS 16-bit load and store instructions Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 09/40] target/mips: Add emulation of nanoMIPS 16-bit save and restore instructions Stefan Markovic
` (31 subsequent siblings)
39 siblings, 0 replies; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add emulation of NOT16, AND16, XOR16, OR16 instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/translate.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 1a839be..12505a8 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16508,6 +16508,27 @@ static int decode_gpr_gpr4_zero(int r)
#define NANOMIPS_EXTRACT_RS5(op) (op & 0x1f)
+static void gen_pool16c_nanomips_insn(DisasContext *ctx)
+{
+ int rt = decode_gpr_gpr3(NANOMIPS_EXTRACT_RD(ctx->opcode));
+ int rs = decode_gpr_gpr3(NANOMIPS_EXTRACT_RS(ctx->opcode));
+
+ switch ((ctx->opcode >> 2) & 0x3) {
+ case NM_NOT16:
+ gen_logic(ctx, OPC_NOR, rt, rs, 0);
+ break;
+ case NM_AND16:
+ gen_logic(ctx, OPC_AND, rt, rt, rs);
+ break;
+ case NM_XOR16:
+ gen_logic(ctx, OPC_XOR, rt, rt, rs);
+ break;
+ case NM_OR16:
+ gen_logic(ctx, OPC_OR, rt, rt, rs);
+ break;
+ }
+}
+
static int decode_nanomips_opc(CPUMIPSState *env, DisasContext *ctx)
{
uint32_t op;
@@ -16578,6 +16599,7 @@ static int decode_nanomips_opc(CPUMIPSState *env, DisasContext *ctx)
case NM_P16C:
switch (ctx->opcode & 1) {
case NM_POOL16C_0:
+ gen_pool16c_nanomips_insn(ctx);
break;
case NM_LWXS16:
gen_ldxs(ctx, rt, rs, rd);
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 09/40] target/mips: Add emulation of nanoMIPS 16-bit save and restore instructions
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (7 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 08/40] target/mips: Add emulation of nanoMIPS 16-bit logic instructions Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 18:34 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 10/40] target/mips: Add emulation of some common nanoMIPS 32-bit instructions Stefan Markovic
` (30 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add emulation of SAVE16 and RESTORE.JRC16 instructions. Routines
gen_save(), gen_restore(), and gen_adjust_sp() are provided for this
purpose.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/translate.c | 73 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 12505a8..2237597 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16508,6 +16508,65 @@ static int decode_gpr_gpr4_zero(int r)
#define NANOMIPS_EXTRACT_RS5(op) (op & 0x1f)
+static void gen_adjust_sp(DisasContext *ctx, int u)
+{
+ TCGv tsp = tcg_temp_new();
+ gen_base_offset_addr(ctx, tsp, 29, u);
+ gen_store_gpr(tsp, 29);
+ tcg_temp_free(tsp);
+}
+
+static void gen_save(DisasContext *ctx, uint8_t rt, uint8_t count,
+ uint8_t gp, uint16_t u)
+{
+ int counter = 0;
+ TCGv va = tcg_temp_new();
+ TCGv t0 = tcg_temp_new();
+
+ while (counter != count) {
+ bool use_gp = gp && (counter == count - 1);
+ int this_rt = use_gp ? 28 : (rt & 0x10) | ((rt + counter) & 0x1f);
+ int this_offset = -((counter + 1) << 2);
+ gen_base_offset_addr(ctx, va, 29, this_offset);
+ gen_load_gpr(t0, this_rt);
+ tcg_gen_qemu_st_tl(t0, va, ctx->mem_idx,
+ (MO_TEUL | ctx->default_tcg_memop_mask));
+ counter++;
+ }
+
+ /* adjust stack pointer */
+ gen_adjust_sp(ctx, -u);
+
+ tcg_temp_free(t0);
+ tcg_temp_free(va);
+}
+
+static void gen_restore(DisasContext *ctx, uint8_t rt, uint8_t count,
+ uint8_t gp, uint16_t u)
+{
+ int counter = 0;
+ TCGv va = tcg_temp_new();
+ TCGv t0 = tcg_temp_new();
+
+ while (counter != count) {
+ bool use_gp = gp && (counter == count - 1);
+ int this_rt = use_gp ? 28 : (rt & 0x10) | ((rt + counter) & 0x1f);
+ int this_offset = u - ((counter + 1) << 2);
+ gen_base_offset_addr(ctx, va, 29, this_offset);
+ tcg_gen_qemu_ld_tl(t0, va, ctx->mem_idx, MO_TESL |
+ ctx->default_tcg_memop_mask);
+ tcg_gen_ext32s_tl(t0, t0);
+ gen_store_gpr(t0, this_rt);
+ counter++;
+ }
+
+ /* adjust stack pointer */
+ gen_adjust_sp(ctx, u);
+
+ tcg_temp_free(t0);
+ tcg_temp_free(va);
+}
+
static void gen_pool16c_nanomips_insn(DisasContext *ctx)
{
int rt = decode_gpr_gpr3(NANOMIPS_EXTRACT_RD(ctx->opcode));
@@ -16856,6 +16915,20 @@ static int decode_nanomips_opc(CPUMIPSState *env, DisasContext *ctx)
}
break;
case NM_P16_SR:
+ {
+ int count = extract32(ctx->opcode, 0, 4);
+ int u = extract32(ctx->opcode, 4, 4) << 4;
+ int rt = 30 + ((ctx->opcode >> 9) & 1);
+ switch ((ctx->opcode >> 8) & 1) {
+ case NM_SAVE16:
+ gen_save(ctx, rt, count, 0, u);
+ break;
+ case NM_RESTORE_JRC16:
+ gen_restore(ctx, rt, count, 0, u);
+ gen_compute_branch(ctx, OPC_JR, 2, 31, 0, 0, 0);
+ break;
+ }
+ }
break;
case NM_MOVEP:
case NM_MOVEPREV:
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 10/40] target/mips: Add emulation of some common nanoMIPS 32-bit instructions
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (8 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 09/40] target/mips: Add emulation of nanoMIPS 16-bit save and restore instructions Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 18:52 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 11/40] target/mips: Add emulation of nanoMIPS 48-bit instructions Stefan Markovic
` (29 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add emulation of SIGRIE, SYSCALL, BREAK, SDBBP, ADDIU, ADDIUPC,
ADDIUGP.W, LWGP, SWGP, ORI, XORI, ANDI, and other instructions.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
---
target/mips/translate.c | 285 +++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 284 insertions(+), 1 deletion(-)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 2237597..201baf1 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16588,6 +16588,289 @@ static void gen_pool16c_nanomips_insn(DisasContext *ctx)
}
}
+static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
+{
+ uint16_t insn;
+ int rt, rs;
+ uint32_t op;
+
+ insn = cpu_lduw_code(env, ctx->base.pc_next + 2);
+ ctx->opcode = (ctx->opcode << 16) | insn;
+
+ rt = (ctx->opcode >> 21) & 0x1f;
+ rs = (ctx->opcode >> 16) & 0x1f;
+
+ op = (ctx->opcode >> 26) & 0x3f;
+ switch (op) {
+ case NM_P_ADDIU:
+ if (rt == 0) {
+ /* P.RI */
+ switch ((ctx->opcode >> 19) & 0x03) {
+ case NM_SIGRIE:
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ case NM_P_SYSCALL:
+ if (((ctx->opcode >> 18) & 0x01) == NM_SYSCALL) {
+ generate_exception_end(ctx, EXCP_SYSCALL);
+ } else {
+ generate_exception_end(ctx, EXCP_RI);
+ }
+ break;
+ case NM_BREAK:
+ generate_exception_end(ctx, EXCP_BREAK);
+ break;
+ case NM_SDBBP:
+ if (is_uhi(extract32(ctx->opcode, 0, 19))) {
+ gen_helper_do_semihosting(cpu_env);
+ } else {
+ if (ctx->hflags & MIPS_HFLAG_SBRI) {
+ generate_exception_end(ctx, EXCP_RI);
+ } else {
+ generate_exception_end(ctx, EXCP_DBp);
+ }
+ }
+ break;
+ }
+ } else {
+ uint16_t imm;
+ imm = (uint16_t) extract32(ctx->opcode, 0, 16);
+ if (rs != 0) {
+ tcg_gen_addi_tl(cpu_gpr[rt], cpu_gpr[rs], imm);
+ tcg_gen_ext32s_tl(cpu_gpr[rt], cpu_gpr[rt]);
+ } else {
+ tcg_gen_movi_tl(cpu_gpr[rt], imm);
+ }
+ }
+ break;
+ case NM_ADDIUPC:
+ if (rt != 0) {
+ int32_t offset = sextract32(ctx->opcode, 0, 1) << 21
+ | extract32(ctx->opcode, 1, 20) << 1;
+ target_long addr = addr_add(ctx, ctx->base.pc_next + 4, offset);
+ tcg_gen_movi_tl(cpu_gpr[rt], addr);
+ tcg_gen_ext32s_tl(cpu_gpr[rt], cpu_gpr[rt]);
+ }
+ break;
+ case NM_POOL32A:
+ break;
+ case NM_P_GP_W:
+ switch (ctx->opcode & 0x03) {
+ case NM_ADDIUGP_W:
+ if (rt != 0) {
+ uint32_t offset = extract32(ctx->opcode, 0, 21);
+ if (offset == 0) {
+ gen_load_gpr(cpu_gpr[rt], 28);
+ } else {
+ TCGv t0;
+ t0 = tcg_temp_new();
+ tcg_gen_movi_tl(t0, offset);
+ gen_op_addr_add(ctx, cpu_gpr[rt], cpu_gpr[28], t0);
+ tcg_temp_free(t0);
+ }
+ }
+ break;
+ case NM_LWGP:
+ gen_ld(ctx, OPC_LW, rt, 28, extract32(ctx->opcode, 2, 19) << 2);
+ break;
+ case NM_SWGP:
+ gen_st(ctx, OPC_SW, rt, 28, extract32(ctx->opcode, 2, 19) << 2);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ break;
+ case NM_P48I:
+ return 6;
+ case NM_P_U12:
+ switch ((ctx->opcode >> 12) & 0x0f) {
+ case NM_ORI:
+ gen_logic_imm(ctx, OPC_ORI, rt, rs, extract32(ctx->opcode, 0, 12));
+ break;
+ case NM_XORI:
+ gen_logic_imm(ctx, OPC_XORI, rt, rs, extract32(ctx->opcode, 0, 12));
+ break;
+ case NM_ANDI:
+ gen_logic_imm(ctx, OPC_ANDI, rt, rs, extract32(ctx->opcode, 0, 12));
+ break;
+ case NM_P_SR:
+ switch ((ctx->opcode >> 20) & 1) {
+ case NM_PP_SR:
+ switch (ctx->opcode & 3) {
+ case NM_SAVE:
+ gen_save(ctx, rt, extract32(ctx->opcode, 16, 4),
+ (ctx->opcode >> 2) & 1,
+ extract32(ctx->opcode, 3, 9) << 3);
+ break;
+ case NM_RESTORE:
+ case NM_RESTORE_JRC:
+ gen_restore(ctx, rt, extract32(ctx->opcode, 16, 4),
+ (ctx->opcode >> 2) & 1,
+ extract32(ctx->opcode, 3, 9) << 3);
+ if ((ctx->opcode & 3) == NM_RESTORE_JRC) {
+ gen_compute_branch(ctx, OPC_JR, 2, 31, 0, 0, 0);
+ }
+ break;
+ }
+ break;
+ case NM_P_SR_F:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ break;
+ case NM_SLTI:
+ gen_slt_imm(ctx, OPC_SLTI, rt, rs, extract32(ctx->opcode, 0, 12));
+ break;
+ case NM_SLTIU:
+ gen_slt_imm(ctx, OPC_SLTIU, rt, rs, extract32(ctx->opcode, 0, 12));
+ break;
+ case NM_SEQI:
+ {
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+ TCGv t2 = tcg_temp_local_new();
+ TCGLabel *l1 = gen_new_label();
+
+ gen_load_gpr(t0, rs);
+ tcg_gen_movi_tl(t1, extract32(ctx->opcode, 0, 12));
+ tcg_gen_movi_tl(t2, 0);
+ tcg_gen_brcond_tl(TCG_COND_NE, t0, t1, l1);
+ tcg_gen_movi_tl(t2, 1);
+ gen_set_label(l1);
+ gen_store_gpr(t2, rt);
+
+ tcg_temp_free(t0);
+ tcg_temp_free(t1);
+ tcg_temp_free(t2);
+ }
+ break;
+ case NM_ADDIUNEG:
+ {
+ int16_t imm;
+ imm = (int16_t) extract32(ctx->opcode, 0, 12);
+ gen_arith_imm(ctx, OPC_ADDIU, rt, rs, -imm);
+ }
+ break;
+ case NM_P_SHIFT:
+ {
+ int shift = extract32(ctx->opcode, 0, 5);
+ switch ((ctx->opcode >> 5) & 0x0f) {
+ case NM_P_SLL:
+ if (rt == 0 && shift == 0) {
+ /* NOP */
+ } else if (rt == 0 && shift == 3) {
+ /* EHB treat as NOP */
+ } else if (rt == 0 && shift == 5) {
+ /* PAUSE */
+ if (ctx->hflags & MIPS_HFLAG_BMASK) {
+ generate_exception_end(ctx, EXCP_RI);
+ }
+ } else if (rt == 0 && shift == 6) {
+ /* SYNC */
+ check_insn(ctx, ISA_MIPS2);
+ /* Treat as NOP. */
+ } else {
+ /* SLL */
+ gen_shift_imm(ctx, OPC_SLL, rt, rs,
+ extract32(ctx->opcode, 0, 5));
+ }
+ break;
+ case NM_SRL:
+ gen_shift_imm(ctx, OPC_SRL, rt, rs,
+ extract32(ctx->opcode, 0, 5));
+ break;
+ case NM_SRA:
+ gen_shift_imm(ctx, OPC_SRA, rt, rs,
+ extract32(ctx->opcode, 0, 5));
+ break;
+ case NM_ROTR:
+ gen_shift_imm(ctx, OPC_ROTR, rt, rs,
+ extract32(ctx->opcode, 0, 5));
+ break;
+ }
+ }
+ break;
+ case NM_P_ROTX:
+ break;
+ case NM_P_INS:
+ switch (((ctx->opcode >> 10) & 2) | ((ctx->opcode >> 5) & 1)) {
+ case NM_INS:
+ gen_bitops(ctx, OPC_INS, rt, rs, extract32(ctx->opcode, 0, 5),
+ extract32(ctx->opcode, 6, 5));
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ break;
+ case NM_P_EXT:
+ switch (((ctx->opcode >> 10) & 2) | ((ctx->opcode >> 5) & 1)) {
+ case NM_EXT:
+ gen_bitops(ctx, OPC_EXT, rt, rs, extract32(ctx->opcode, 0, 5),
+ extract32(ctx->opcode, 6, 5));
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ break;
+ case NM_POOL32F:
+ break;
+ case NM_POOL32S:
+ break;
+ case NM_P_LUI:
+ switch ((ctx->opcode >> 1) & 1) {
+ case NM_LUI:
+ if (rt != 0) {
+ tcg_gen_movi_tl(cpu_gpr[rt],
+ sextract32(ctx->opcode, 0, 1) << 31 |
+ extract32(ctx->opcode, 2, 10) << 21 |
+ extract32(ctx->opcode, 12, 9) << 12);
+ }
+ break;
+ case NM_ALUIPC:
+ if (rt != 0) {
+ int offset = sextract32(ctx->opcode, 0, 1) << 31 |
+ extract32(ctx->opcode, 2, 10) << 21 |
+ extract32(ctx->opcode, 12, 9) << 12;
+ target_long addr;
+ addr = ~0xFFF & addr_add(ctx, ctx->base.pc_next + 4, offset);
+ tcg_gen_movi_tl(cpu_gpr[rt], addr);
+ }
+ break;
+ }
+ break;
+ case NM_P_GP_BH:
+ break;
+ case NM_P_LS_U12:
+ break;
+ case NM_P_LS_S9:
+ break;
+ case NM_MOVE_BALC:
+ break;
+ case NM_P_BAL:
+ break;
+ case NM_P_J:
+ break;
+ case NM_P_BR1:
+ break;
+ case NM_P_BR2:
+ break;
+ case NM_P_BRI:
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ return 4;
+}
+
static int decode_nanomips_opc(CPUMIPSState *env, DisasContext *ctx)
{
uint32_t op;
@@ -16966,7 +17249,7 @@ static int decode_nanomips_opc(CPUMIPSState *env, DisasContext *ctx)
}
break;
default:
- break;
+ return decode_nanomips_32_48_opc(env, ctx);
}
return 2;
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 11/40] target/mips: Add emulation of nanoMIPS 48-bit instructions
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (9 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 10/40] target/mips: Add emulation of some common nanoMIPS 32-bit instructions Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 19:01 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 12/40] target/mips: Add emulation of nanoMIPS FP instructions Stefan Markovic
` (28 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add emulation of LI48, ADDIU48, ADDIUGP48, ADDIUPC48, LWPC48, and
SWPC48 instructions.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
---
target/mips/translate.c | 66 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 201baf1..c47ee7d 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16682,6 +16682,72 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
}
break;
case NM_P48I:
+ insn = cpu_lduw_code(env, ctx->base.pc_next + 4);
+ switch ((ctx->opcode >> 16) & 0x1f) {
+ case NM_LI48:
+ if (rt != 0) {
+ tcg_gen_movi_tl(cpu_gpr[rt],
+ extract32(ctx->opcode, 0, 16) | insn << 16);
+ }
+ break;
+ case NM_ADDIU48:
+ if (rt != 0) {
+ tcg_gen_addi_tl(cpu_gpr[rt], cpu_gpr[rt],
+ extract32(ctx->opcode, 0, 16) | insn << 16);
+ tcg_gen_ext32s_tl(cpu_gpr[rt], cpu_gpr[rt]);
+ }
+ break;
+ case NM_ADDIUGP48:
+ if (rt != 0) {
+ tcg_gen_addi_tl(cpu_gpr[rt], cpu_gpr[28],
+ extract32(ctx->opcode, 0, 16) | insn << 16);
+ tcg_gen_ext32s_tl(cpu_gpr[rt], cpu_gpr[rt]);
+ }
+ break;
+ case NM_ADDIUPC48:
+ if (rt != 0) {
+ int32_t offset = extract32(ctx->opcode, 0, 16) | insn << 16;
+ target_long addr = addr_add(ctx, ctx->base.pc_next + 6, offset);
+
+ tcg_gen_movi_tl(cpu_gpr[rt], addr);
+ tcg_gen_ext32s_tl(cpu_gpr[rt], cpu_gpr[rt]);
+ }
+ break;
+ case NM_LWPC48:
+ if (rt != 0) {
+ TCGv t0;
+ t0 = tcg_temp_new();
+
+ int32_t offset = extract32(ctx->opcode, 0, 16) | insn << 16;
+ target_long addr = addr_add(ctx, ctx->base.pc_next + 6, offset);
+
+ tcg_gen_movi_tl(t0, addr);
+ tcg_gen_qemu_ld_tl(cpu_gpr[rt], t0, ctx->mem_idx, MO_TESL);
+ tcg_temp_free(t0);
+ }
+ break;
+ case NM_SWPC48:
+ {
+ TCGv t0, t1;
+ t0 = tcg_temp_new();
+ t1 = tcg_temp_new();
+
+ int32_t offset = extract32(ctx->opcode, 0, 16) | insn << 16;
+ target_long addr = addr_add(ctx, ctx->base.pc_next + 6, offset);
+
+ tcg_gen_movi_tl(t0, addr);
+ gen_load_gpr(t1, rt);
+
+ tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_TEUL);
+
+ tcg_temp_free(t0);
+ tcg_temp_free(t1);
+ }
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
return 6;
case NM_P_U12:
switch ((ctx->opcode >> 12) & 0x0f) {
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 12/40] target/mips: Add emulation of nanoMIPS FP instructions
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (10 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 11/40] target/mips: Add emulation of nanoMIPS 48-bit instructions Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 19:03 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 13/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32a0) Stefan Markovic
` (27 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add emulation of basic floating point arithmetic for nanoMIPS.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
---
target/mips/translate.c | 300 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 300 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index c47ee7d..2c7f62e 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16588,6 +16588,305 @@ static void gen_pool16c_nanomips_insn(DisasContext *ctx)
}
}
+static void gen_pool32f_nanomips_insn(DisasContext *ctx)
+{
+ int rt, rs, rd;
+
+ rt = (ctx->opcode >> 21) & 0x1f;
+ rs = (ctx->opcode >> 16) & 0x1f;
+ rd = (ctx->opcode >> 11) & 0x1f;
+
+ if (!(ctx->CP0_Config1 & (1 << CP0C1_FP))) {
+ generate_exception_end(ctx, EXCP_RI);
+ return;
+ }
+ check_cp1_enabled(ctx);
+ switch (ctx->opcode & 0x07) {
+ case NM_POOL32F_0:
+ switch ((ctx->opcode >> 3) & 0x7f) {
+ case NM_RINT_S:
+ gen_farith(ctx, OPC_RINT_S, 0, rt, rs, 0);
+ break;
+ case NM_RINT_D:
+ gen_farith(ctx, OPC_RINT_D, 0, rt, rs, 0);
+ break;
+ case NM_CLASS_S:
+ gen_farith(ctx, OPC_CLASS_S, 0, rt, rs, 0);
+ break;
+ case NM_CLASS_D:
+ gen_farith(ctx, OPC_CLASS_D, 0, rt, rs, 0);
+ break;
+ case NM_ADD_S:
+ gen_farith(ctx, OPC_ADD_S, rt, rs, rd, 0);
+ break;
+ case NM_ADD_D:
+ gen_farith(ctx, OPC_ADD_D, rt, rs, rd, 0);
+ break;
+ case NM_SUB_S:
+ gen_farith(ctx, OPC_SUB_S, rt, rs, rd, 0);
+ break;
+ case NM_SUB_D:
+ gen_farith(ctx, OPC_SUB_D, rt, rs, rd, 0);
+ break;
+ case NM_MUL_S:
+ gen_farith(ctx, OPC_MUL_S, rt, rs, rd, 0);
+ break;
+ case NM_MUL_D:
+ gen_farith(ctx, OPC_MUL_D, rt, rs, rd, 0);
+ break;
+ case NM_DIV_S:
+ gen_farith(ctx, OPC_DIV_S, rt, rs, rd, 0);
+ break;
+ case NM_DIV_D:
+ gen_farith(ctx, OPC_DIV_D, rt, rs, rd, 0);
+ break;
+ case NM_SELEQZ_S:
+ gen_sel_s(ctx, OPC_SELEQZ_S, rd, rt, rs);
+ break;
+ case NM_SELEQZ_D:
+ gen_sel_d(ctx, OPC_SELEQZ_D, rd, rt, rs);
+ break;
+ case NM_SELNEZ_S:
+ gen_sel_s(ctx, OPC_SELNEZ_S, rd, rt, rs);
+ break;
+ case NM_SELNEZ_D:
+ gen_sel_d(ctx, OPC_SELNEZ_D, rd, rt, rs);
+ break;
+ case NM_SEL_S:
+ gen_sel_s(ctx, OPC_SEL_S, rd, rt, rs);
+ break;
+ case NM_SEL_D:
+ gen_sel_d(ctx, OPC_SEL_D, rd, rt, rs);
+ break;
+ case NM_MADDF_S:
+ gen_farith(ctx, OPC_MADDF_S, rt, rs, rd, 0);
+ break;
+ case NM_MADDF_D:
+ gen_farith(ctx, OPC_MADDF_D, rt, rs, rd, 0);
+ break;
+ case NM_MSUBF_S:
+ gen_farith(ctx, OPC_MSUBF_S, rt, rs, rd, 0);
+ break;
+ case NM_MSUBF_D:
+ gen_farith(ctx, OPC_MSUBF_D, rt, rs, rd, 0);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ break;
+ case NM_POOL32F_3:
+ switch ((ctx->opcode >> 3) & 0x07) {
+ case NM_MIN_FMT:
+ switch ((ctx->opcode >> 9) & 1) {
+ case FMT_SDPS_S:
+ gen_farith(ctx, OPC_MIN_S, rt, rs, rd, 0);
+ break;
+ case FMT_SDPS_D:
+ gen_farith(ctx, OPC_MIN_D, rt, rs, rd, 0);
+ break;
+ }
+ break;
+ case NM_MAX_FMT:
+ switch ((ctx->opcode >> 9) & 1) {
+ case FMT_SDPS_S:
+ gen_farith(ctx, OPC_MAX_S, rt, rs, rd, 0);
+ break;
+ case FMT_SDPS_D:
+ gen_farith(ctx, OPC_MAX_D, rt, rs, rd, 0);
+ break;
+ }
+ break;
+ case NM_MINA_FMT:
+ switch ((ctx->opcode >> 9) & 1) {
+ case FMT_SDPS_S:
+ gen_farith(ctx, OPC_MINA_S, rt, rs, rd, 0);
+ break;
+ case FMT_SDPS_D:
+ gen_farith(ctx, OPC_MINA_D, rt, rs, rd, 0);
+ break;
+ }
+ break;
+ case NM_MAXA_FMT:
+ switch ((ctx->opcode >> 9) & 1) {
+ case FMT_SDPS_S:
+ gen_farith(ctx, OPC_MAXA_S, rt, rs, rd, 0);
+ break;
+ case FMT_SDPS_D:
+ gen_farith(ctx, OPC_MAXA_D, rt, rs, rd, 0);
+ break;
+ }
+ break;
+ case NM_POOL32FXF:
+ switch ((ctx->opcode >> 6) & 0xff) {
+ case NM_CFC1:
+ gen_cp1(ctx, OPC_CFC1, rt, rs);
+ break;
+ case NM_CTC1:
+ gen_cp1(ctx, OPC_CTC1, rt, rs);
+ break;
+ case NM_MFC1:
+ gen_cp1(ctx, OPC_MFC1, rt, rs);
+ break;
+ case NM_MTC1:
+ gen_cp1(ctx, OPC_MTC1, rt, rs);
+ break;
+ case NM_MFHC1:
+ gen_cp1(ctx, OPC_MFHC1, rt, rs);
+ break;
+ case NM_MTHC1:
+ gen_cp1(ctx, OPC_MTHC1, rt, rs);
+ break;
+ case NM_CVT_S_PL:
+ gen_farith(ctx, OPC_CVT_S_PL, -1, rs, rt, 0);
+ break;
+ case NM_CVT_S_PU:
+ gen_farith(ctx, OPC_CVT_S_PU, -1, rs, rt, 0);
+ break;
+ default:
+ switch ((ctx->opcode >> 6) & 0x1ff) {
+ case NM_CVT_L_S:
+ gen_farith(ctx, OPC_CVT_L_S, -1, rs, rt, 0);
+ break;
+ case NM_CVT_L_D:
+ gen_farith(ctx, OPC_CVT_L_D, -1, rs, rt, 0);
+ break;
+ case NM_CVT_W_S:
+ gen_farith(ctx, OPC_CVT_W_S, -1, rs, rt, 0);
+ break;
+ case NM_CVT_W_D:
+ gen_farith(ctx, OPC_CVT_W_D, -1, rs, rt, 0);
+ break;
+ case NM_RSQRT_S:
+ gen_farith(ctx, OPC_RSQRT_S, -1, rs, rt, 0);
+ break;
+ case NM_RSQRT_D:
+ gen_farith(ctx, OPC_RSQRT_D, -1, rs, rt, 0);
+ break;
+ case NM_SQRT_S:
+ gen_farith(ctx, OPC_SQRT_S, -1, rs, rt, 0);
+ break;
+ case NM_SQRT_D:
+ gen_farith(ctx, OPC_SQRT_D, -1, rs, rt, 0);
+ break;
+ case NM_RECIP_S:
+ gen_farith(ctx, OPC_RECIP_S, -1, rs, rt, 0);
+ break;
+ case NM_RECIP_D:
+ gen_farith(ctx, OPC_RECIP_D, -1, rs, rt, 0);
+ break;
+ case NM_FLOOR_L_S:
+ gen_farith(ctx, OPC_FLOOR_L_S, -1, rs, rt, 0);
+ break;
+ case NM_FLOOR_L_D:
+ gen_farith(ctx, OPC_FLOOR_L_D, -1, rs, rt, 0);
+ break;
+ case NM_FLOOR_W_S:
+ gen_farith(ctx, OPC_FLOOR_W_S, -1, rs, rt, 0);
+ break;
+ case NM_FLOOR_W_D:
+ gen_farith(ctx, OPC_FLOOR_W_D, -1, rs, rt, 0);
+ break;
+ case NM_CEIL_L_S:
+ gen_farith(ctx, OPC_CEIL_L_S, -1, rs, rt, 0);
+ break;
+ case NM_CEIL_L_D:
+ gen_farith(ctx, OPC_CEIL_L_D, -1, rs, rt, 0);
+ break;
+ case NM_CEIL_W_S:
+ gen_farith(ctx, OPC_CEIL_W_S, -1, rs, rt, 0);
+ break;
+ case NM_CEIL_W_D:
+ gen_farith(ctx, OPC_CEIL_W_D, -1, rs, rt, 0);
+ break;
+ case NM_TRUNC_L_S:
+ gen_farith(ctx, OPC_TRUNC_L_S, -1, rs, rt, 0);
+ break;
+ case NM_TRUNC_L_D:
+ gen_farith(ctx, OPC_TRUNC_L_D, -1, rs, rt, 0);
+ break;
+ case NM_TRUNC_W_S:
+ gen_farith(ctx, OPC_TRUNC_W_S, -1, rs, rt, 0);
+ break;
+ case NM_TRUNC_W_D:
+ gen_farith(ctx, OPC_TRUNC_W_D, -1, rs, rt, 0);
+ break;
+ case NM_ROUND_L_S:
+ gen_farith(ctx, OPC_ROUND_L_S, -1, rs, rt, 0);
+ break;
+ case NM_ROUND_L_D:
+ gen_farith(ctx, OPC_ROUND_L_D, -1, rs, rt, 0);
+ break;
+ case NM_ROUND_W_S:
+ gen_farith(ctx, OPC_ROUND_W_S, -1, rs, rt, 0);
+ break;
+ case NM_ROUND_W_D:
+ gen_farith(ctx, OPC_ROUND_W_D, -1, rs, rt, 0);
+ break;
+ case NM_MOV_S:
+ gen_farith(ctx, OPC_MOV_S, -1, rs, rt, 0);
+ break;
+ case NM_MOV_D:
+ gen_farith(ctx, OPC_MOV_D, -1, rs, rt, 0);
+ break;
+ case NM_ABS_S:
+ gen_farith(ctx, OPC_ABS_S, -1, rs, rt, 0);
+ break;
+ case NM_ABS_D:
+ gen_farith(ctx, OPC_ABS_D, -1, rs, rt, 0);
+ break;
+ case NM_NEG_S:
+ gen_farith(ctx, OPC_NEG_S, -1, rs, rt, 0);
+ break;
+ case NM_NEG_D:
+ gen_farith(ctx, OPC_NEG_D, -1, rs, rt, 0);
+ break;
+ case NM_CVT_D_S:
+ gen_farith(ctx, OPC_CVT_D_S, -1, rs, rt, 0);
+ break;
+ case NM_CVT_D_W:
+ gen_farith(ctx, OPC_CVT_D_W, -1, rs, rt, 0);
+ break;
+ case NM_CVT_D_L:
+ gen_farith(ctx, OPC_CVT_D_L, -1, rs, rt, 0);
+ break;
+ case NM_CVT_S_D:
+ gen_farith(ctx, OPC_CVT_S_D, -1, rs, rt, 0);
+ break;
+ case NM_CVT_S_W:
+ gen_farith(ctx, OPC_CVT_S_W, -1, rs, rt, 0);
+ break;
+ case NM_CVT_S_L:
+ gen_farith(ctx, OPC_CVT_S_L, -1, rs, rt, 0);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ break;
+ }
+ break;
+ }
+ break;
+ case NM_POOL32F_5:
+ switch ((ctx->opcode >> 3) & 0x07) {
+ case NM_CMP_CONDN_S:
+ gen_r6_cmp_s(ctx, (ctx->opcode >> 6) & 0x1f, rt, rs, rd);
+ break;
+ case NM_CMP_CONDN_D:
+ gen_r6_cmp_d(ctx, (ctx->opcode >> 6) & 0x1f, rt, rs, rd);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+}
+
static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
{
uint16_t insn;
@@ -16887,6 +17186,7 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
}
break;
case NM_POOL32F:
+ gen_pool32f_nanomips_insn(ctx);
break;
case NM_POOL32S:
break;
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 13/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32a0)
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (11 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 12/40] target/mips: Add emulation of nanoMIPS FP instructions Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 19:08 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 14/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32axf) Stefan Markovic
` (26 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add emulation of nanoMIPS instructions that are situated in pool32a0.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
---
target/mips/translate.c | 190 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 190 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 2c7f62e..81c2950 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16588,6 +16588,186 @@ static void gen_pool16c_nanomips_insn(DisasContext *ctx)
}
}
+static void gen_pool32a0_nanomips_insn(DisasContext *ctx)
+{
+ int rt = (ctx->opcode >> 21) & 0x1f;
+ int rs = (ctx->opcode >> 16) & 0x1f;
+ int rd = (ctx->opcode >> 11) & 0x1f;
+
+ switch ((ctx->opcode >> 3) & 0x7f) {
+ case NM_P_TRAP:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case NM_TEQ:
+ gen_trap(ctx, OPC_TEQ, rs, rt, -1);
+ break;
+ case NM_TNE:
+ gen_trap(ctx, OPC_TNE, rs, rt, -1);
+ break;
+ }
+ break;
+ case NM_RDHWR:
+ gen_rdhwr(ctx, rt, rs, extract32(ctx->opcode, 11, 3));
+ break;
+ case NM_SEB:
+ gen_bshfl(ctx, OPC_SEB, rs, rt);
+ break;
+ case NM_SEH:
+ gen_bshfl(ctx, OPC_SEH, rs, rt);
+ break;
+ case NM_SLLV:
+ gen_shift(ctx, OPC_SLLV, rd, rt, rs);
+ break;
+ case NM_SRLV:
+ gen_shift(ctx, OPC_SRLV, rd, rt, rs);
+ break;
+ case NM_SRAV:
+ gen_shift(ctx, OPC_SRAV, rd, rt, rs);
+ break;
+ case NM_ROTRV:
+ gen_shift(ctx, OPC_ROTRV, rd, rt, rs);
+ break;
+ case NM_ADD:
+ gen_arith(ctx, OPC_ADD, rd, rs, rt);
+ break;
+ case NM_ADDU:
+ gen_arith(ctx, OPC_ADDU, rd, rs, rt);
+ break;
+ case NM_SUB:
+ gen_arith(ctx, OPC_SUB, rd, rs, rt);
+ break;
+ case NM_SUBU:
+ gen_arith(ctx, OPC_SUBU, rd, rs, rt);
+ break;
+ case NM_P_CMOVE:
+ switch ((ctx->opcode >> 10) & 1) {
+ case NM_MOVZ:
+ gen_cond_move(ctx, OPC_MOVZ, rd, rs, rt);
+ break;
+ case NM_MOVN:
+ gen_cond_move(ctx, OPC_MOVN, rd, rs, rt);
+ break;
+ }
+ break;
+ case NM_AND:
+ gen_logic(ctx, OPC_AND, rd, rs, rt);
+ break;
+ case NM_OR:
+ gen_logic(ctx, OPC_OR, rd, rs, rt);
+ break;
+ case NM_NOR:
+ gen_logic(ctx, OPC_NOR, rd, rs, rt);
+ break;
+ case NM_XOR:
+ gen_logic(ctx, OPC_XOR, rd, rs, rt);
+ break;
+ case NM_SLT:
+ gen_slt(ctx, OPC_SLT, rd, rs, rt);
+ break;
+ case NM_P_SLTU:
+ if (rd == 0) {
+ /* P_DVP */
+#ifndef CONFIG_USER_ONLY
+ TCGv t0 = tcg_temp_new();
+ switch ((ctx->opcode >> 10) & 1) {
+ case NM_DVP:
+ if (ctx->vp) {
+ check_cp0_enabled(ctx);
+ gen_helper_dvp(t0, cpu_env);
+ gen_store_gpr(t0, rt);
+ }
+ break;
+ case NM_EVP:
+ if (ctx->vp) {
+ check_cp0_enabled(ctx);
+ gen_helper_evp(t0, cpu_env);
+ gen_store_gpr(t0, rt);
+ }
+ break;
+ }
+ tcg_temp_free(t0);
+#endif
+ } else {
+ gen_slt(ctx, OPC_SLTU, rd, rs, rt);
+ }
+ break;
+ case NM_SOV:
+ {
+ TCGv t0 = tcg_temp_local_new();
+ TCGv t1 = tcg_temp_new();
+ TCGv t2 = tcg_temp_new();
+ TCGLabel *l1 = gen_new_label();
+
+ gen_load_gpr(t1, rs);
+ gen_load_gpr(t2, rt);
+ tcg_gen_add_tl(t0, t1, t2);
+ tcg_gen_ext32s_tl(t0, t0);
+ tcg_gen_xor_tl(t1, t1, t2);
+ tcg_gen_xor_tl(t2, t0, t2);
+ tcg_gen_andc_tl(t1, t2, t1);
+
+ tcg_gen_movi_tl(t0, 0);
+ tcg_gen_brcondi_tl(TCG_COND_GE, t1, 0, l1);
+ /* operands of same sign, result different sign */
+
+ tcg_gen_movi_tl(t0, 1);
+ gen_set_label(l1);
+ gen_store_gpr(t0, rd);
+
+ tcg_temp_free(t0);
+ tcg_temp_free(t1);
+ tcg_temp_free(t2);
+ }
+ break;
+ case NM_MUL:
+ gen_r6_muldiv(ctx, R6_OPC_MUL, rd, rs, rt);
+ break;
+ case NM_MUH:
+ gen_r6_muldiv(ctx, R6_OPC_MUH, rd, rs, rt);
+ break;
+ case NM_MULU:
+ gen_r6_muldiv(ctx, R6_OPC_MULU, rd, rs, rt);
+ break;
+ case NM_MUHU:
+ gen_r6_muldiv(ctx, R6_OPC_MUHU, rd, rs, rt);
+ break;
+ case NM_DIV:
+ gen_r6_muldiv(ctx, R6_OPC_DIV, rd, rs, rt);
+ break;
+ case NM_MOD:
+ gen_r6_muldiv(ctx, R6_OPC_MOD, rd, rs, rt);
+ break;
+ case NM_DIVU:
+ gen_r6_muldiv(ctx, R6_OPC_DIVU, rd, rs, rt);
+ break;
+ case NM_MODU:
+ gen_r6_muldiv(ctx, R6_OPC_MODU, rd, rs, rt);
+ break;
+#ifndef CONFIG_USER_ONLY
+ case NM_MFC0:
+ check_cp0_enabled(ctx);
+ if (rt == 0) {
+ /* Treat as NOP. */
+ break;
+ }
+ gen_mfc0(ctx, cpu_gpr[rt], rs, (ctx->opcode >> 11) & 0x7);
+ break;
+ case NM_MTC0:
+ check_cp0_enabled(ctx);
+ {
+ TCGv t0 = tcg_temp_new();
+
+ gen_load_gpr(t0, rt);
+ gen_mtc0(ctx, t0, rs, (ctx->opcode >> 11) & 0x7);
+ tcg_temp_free(t0);
+ }
+ break;
+#endif
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+}
+
static void gen_pool32f_nanomips_insn(DisasContext *ctx)
{
int rt, rs, rd;
@@ -16952,6 +17132,16 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
}
break;
case NM_POOL32A:
+ switch (ctx->opcode & 0x07) {
+ case NM_POOL32A0:
+ gen_pool32a0_nanomips_insn(ctx);
+ break;
+ case NM_POOL32A7:
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
break;
case NM_P_GP_W:
switch (ctx->opcode & 0x03) {
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 14/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32axf)
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (12 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 13/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32a0) Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 19:13 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 15/40] target/mips: Add emulation of misc nanoMIPS instructions (pool p_lsx) Stefan Markovic
` (25 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add emulation of misc nanoMIPS instructions situated in pool32axf.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
---
target/mips/translate.c | 94 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 94 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 81c2950..af7825a 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16768,6 +16768,93 @@ static void gen_pool32a0_nanomips_insn(DisasContext *ctx)
}
}
+static void gen_pool32axf_nanomips_insn(CPUMIPSState *env, DisasContext *ctx)
+{
+ int rt = (ctx->opcode >> 21) & 0x1f;
+ int rs = (ctx->opcode >> 16) & 0x1f;
+
+ switch ((ctx->opcode >> 6) & 0x07) {
+ case NM_POOL32AXF_4:
+ case NM_POOL32AXF_5:
+ switch ((ctx->opcode >> 9) & 0x7f) {
+ case NM_CLO:
+ gen_cl(ctx, OPC_CLO, rt, rs);
+ break;
+ case NM_CLZ:
+ gen_cl(ctx, OPC_CLZ, rt, rs);
+ break;
+#ifndef CONFIG_USER_ONLY
+ case NM_TLBP:
+ gen_cp0(env, ctx, OPC_TLBP, 0, 0);
+ break;
+ case NM_TLBR:
+ gen_cp0(env, ctx, OPC_TLBR, 0, 0);
+ break;
+ case NM_TLBWI:
+ gen_cp0(env, ctx, OPC_TLBWI, 0, 0);
+ break;
+ case NM_TLBWR:
+ gen_cp0(env, ctx, OPC_TLBWR, 0, 0);
+ break;
+ case NM_TLBINV:
+ gen_cp0(env, ctx, OPC_TLBINV, 0, 0);
+ break;
+ case NM_TLBINVF:
+ gen_cp0(env, ctx, OPC_TLBINVF, 0, 0);
+ break;
+ case NM_DI:
+ check_cp0_enabled(ctx);
+ {
+ TCGv t0 = tcg_temp_new();
+
+ save_cpu_state(ctx, 1);
+ gen_helper_di(t0, cpu_env);
+ gen_store_gpr(t0, rt);
+ /* Stop translation as we may have switched the execution mode */
+ ctx->base.is_jmp = DISAS_STOP;
+ tcg_temp_free(t0);
+ }
+ break;
+ case NM_EI:
+ check_cp0_enabled(ctx);
+ {
+ TCGv t0 = tcg_temp_new();
+
+ save_cpu_state(ctx, 1);
+ gen_helper_ei(t0, cpu_env);
+ gen_store_gpr(t0, rt);
+ /* Stop translation as we may have switched the execution mode */
+ ctx->base.is_jmp = DISAS_STOP;
+ tcg_temp_free(t0);
+ }
+ break;
+ case NM_RDPGPR:
+ gen_load_srsgpr(rs, rt);
+ break;
+ case NM_WRPGPR:
+ gen_store_srsgpr(rs, rt);
+ break;
+ case NM_WAIT:
+ gen_cp0(env, ctx, OPC_WAIT, 0, 0);
+ break;
+ case NM_DERET:
+ gen_cp0(env, ctx, OPC_DERET, 0, 0);
+ break;
+ case NM_ERETX:
+ gen_cp0(env, ctx, OPC_ERET, 0, 0);
+ break;
+#endif
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+}
+
static void gen_pool32f_nanomips_insn(DisasContext *ctx)
{
int rt, rs, rd;
@@ -17137,6 +17224,13 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
gen_pool32a0_nanomips_insn(ctx);
break;
case NM_POOL32A7:
+ {
+ switch ((ctx->opcode >> 3) & 0x07) {
+ case NM_POOL32AXF:
+ gen_pool32axf_nanomips_insn(env, ctx);
+ break;
+ }
+ }
break;
default:
generate_exception_end(ctx, EXCP_RI);
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 15/40] target/mips: Add emulation of misc nanoMIPS instructions (pool p_lsx)
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (13 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 14/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32axf) Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 19:19 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 16/40] target/mips: Implement emulation of nanoMIPS ROTX instruction Stefan Markovic
` (24 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add emulation of nanoMIPS instructions situated in pool p_lsx, and
emulation of LSA instruction as well.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
---
target/mips/translate.c | 139 +++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 138 insertions(+), 1 deletion(-)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index af7825a..f3753bb 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16855,6 +16855,132 @@ static void gen_pool32axf_nanomips_insn(CPUMIPSState *env, DisasContext *ctx)
}
}
+
+static void gen_p_lsx(DisasContext *ctx, int rd, int rs, int rt)
+{
+ TCGv t0, t1;
+ t0 = tcg_temp_new();
+ t1 = tcg_temp_new();
+ tcg_gen_movi_tl(t1, 0);
+ if (rs == 0) {
+ tcg_gen_movi_tl(t0, 0);
+ } else {
+ gen_load_gpr(t0, rs);
+ }
+ if (rt == 0) {
+ tcg_gen_movi_tl(t1, 0);
+ } else {
+ gen_load_gpr(t1, rt);
+ }
+ if (((ctx->opcode >> 6) & 1) == 1) {
+ /* PP.LSXS instructions require shifting */
+ switch ((ctx->opcode >> 7) & 0xf) {
+ case NM_LHXS:
+ case NM_SHXS:
+ case NM_LHUXS:
+ tcg_gen_shli_tl(t0, t0, 1);
+ break;
+ case NM_LWXS:
+ case NM_SWXS:
+ case NM_LWC1XS:
+ case NM_SWC1XS:
+ tcg_gen_shli_tl(t0, t0, 2);
+ break;
+ case NM_LDC1XS:
+ case NM_SDC1XS:
+ tcg_gen_shli_tl(t0, t0, 3);
+ break;
+ }
+ }
+ gen_op_addr_add(ctx, t0, t0, t1);
+
+ switch ((ctx->opcode >> 7) & 0xf) {
+ case NM_LBX:
+ tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx,
+ MO_SB);
+ gen_store_gpr(t0, rd);
+ break;
+ case NM_LHX:
+ /*case NM_LHXS:*/
+ tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx,
+ MO_TESW);
+ gen_store_gpr(t0, rd);
+ break;
+ case NM_LWX:
+ /*case NM_LWXS:*/
+ tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx,
+ MO_TESL);
+ gen_store_gpr(t0, rd);
+ break;
+ case NM_LBUX:
+ tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx,
+ MO_UB);
+ gen_store_gpr(t0, rd);
+ break;
+ case NM_LHUX:
+ /*case NM_LHUXS:*/
+ tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx,
+ MO_TEUW);
+ gen_store_gpr(t0, rd);
+ break;
+ case NM_SBX:
+ gen_load_gpr(t1, rd);
+ tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx,
+ MO_8);
+ break;
+ case NM_SHX:
+ /*case NM_SHXS:*/
+ gen_load_gpr(t1, rd);
+ tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx,
+ MO_TEUW);
+ break;
+ case NM_SWX:
+ /*case NM_SWXS:*/
+ gen_load_gpr(t1, rd);
+ tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx,
+ MO_TEUL);
+ break;
+ case NM_LWC1X:
+ /*case NM_LWC1XS:*/
+ case NM_LDC1X:
+ /*case NM_LDC1XS:*/
+ case NM_SWC1X:
+ /*case NM_SWC1XS:*/
+ case NM_SDC1X:
+ /*case NM_SDC1XS:*/
+ if (ctx->CP0_Config1 & (1 << CP0C1_FP)) {
+ check_cp1_enabled(ctx);
+ switch ((ctx->opcode >> 7) & 0xf) {
+ case NM_LWC1X:
+ /*case NM_LWC1XS:*/
+ gen_flt_ldst(ctx, OPC_LWC1, rd, t0);
+ break;
+ case NM_LDC1X:
+ /*case NM_LDC1XS:*/
+ gen_flt_ldst(ctx, OPC_LDC1, rd, t0);
+ break;
+ case NM_SWC1X:
+ /*case NM_SWC1XS:*/
+ gen_flt_ldst(ctx, OPC_SWC1, rd, t0);
+ break;
+ case NM_SDC1X:
+ /*case NM_SDC1XS:*/
+ gen_flt_ldst(ctx, OPC_SDC1, rd, t0);
+ break;
+ }
+ } else {
+ generate_exception_err(ctx, EXCP_CpU, 1);
+ }
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+
+ tcg_temp_free(t0);
+ tcg_temp_free(t1);
+}
+
static void gen_pool32f_nanomips_insn(DisasContext *ctx)
{
int rt, rs, rd;
@@ -17157,7 +17283,7 @@ static void gen_pool32f_nanomips_insn(DisasContext *ctx)
static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
{
uint16_t insn;
- int rt, rs;
+ int rt, rs, rd;
uint32_t op;
insn = cpu_lduw_code(env, ctx->base.pc_next + 2);
@@ -17165,6 +17291,7 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
rt = (ctx->opcode >> 21) & 0x1f;
rs = (ctx->opcode >> 16) & 0x1f;
+ rd = (ctx->opcode >> 11) & 0x1f;
op = (ctx->opcode >> 26) & 0x3f;
switch (op) {
@@ -17226,6 +17353,16 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
case NM_POOL32A7:
{
switch ((ctx->opcode >> 3) & 0x07) {
+ case NM_P_LSX:
+ gen_p_lsx(ctx, rd, rs, rt);
+ break;
+ case NM_LSA:
+ /* In nanoMIPS, the shift field directly encodes the shift
+ * amount, meaning that the supported shift values are in
+ * the range 0 to 3 (instead of 1 to 4 in MIPSR6). */
+ gen_lsa(ctx, OPC_LSA, rd, rs, rt,
+ extract32(ctx->opcode, 9, 2) - 1);
+ break;
case NM_POOL32AXF:
gen_pool32axf_nanomips_insn(env, ctx);
break;
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 16/40] target/mips: Implement emulation of nanoMIPS ROTX instruction
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (14 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 15/40] target/mips: Add emulation of misc nanoMIPS instructions (pool p_lsx) Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 19:19 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 17/40] target/mips: Implement emulation of nanoMIPS EXTW instruction Stefan Markovic
` (23 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Matthew Fortune <matthew.fortune@mips.com>
Added a helper for ROTX based on the pseudocode from the
architecture spec. This instraction was not present in previous
MIPS instruction sets.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
---
target/mips/helper.h | 2 ++
target/mips/op_helper.c | 94 +++++++++++++++++++++++++++++++++++++++++++++++++
target/mips/translate.c | 15 ++++++++
3 files changed, 111 insertions(+)
diff --git a/target/mips/helper.h b/target/mips/helper.h
index 5f49234..b2a780a 100644
--- a/target/mips/helper.h
+++ b/target/mips/helper.h
@@ -40,6 +40,8 @@ DEF_HELPER_FLAGS_1(bitswap, TCG_CALL_NO_RWG_SE, tl, tl)
DEF_HELPER_FLAGS_1(dbitswap, TCG_CALL_NO_RWG_SE, tl, tl)
#endif
+DEF_HELPER_FLAGS_4(rotx, TCG_CALL_NO_RWG_SE, tl, tl, i32, i32, i32)
+
#ifndef CONFIG_USER_ONLY
/* CP0 helpers */
DEF_HELPER_1(mfc0_mvpcontrol, tl, env)
diff --git a/target/mips/op_helper.c b/target/mips/op_helper.c
index 0b2663b..b3eef9f 100644
--- a/target/mips/op_helper.c
+++ b/target/mips/op_helper.c
@@ -249,6 +249,100 @@ target_ulong helper_bitswap(target_ulong rt)
return (int32_t)bitswap(rt);
}
+target_ulong helper_rotx(target_ulong rs, uint32_t shift, uint32_t shiftx,
+ uint32_t stripe)
+{
+ int i;
+ uint64_t tmp0 = ((uint64_t)rs) << 32 | ((uint64_t)rs & 0xffffffff);
+ uint64_t tmp1 = tmp0;
+ for (i = 0; i <= 46; i++) {
+ int s;
+ if (i & 0x8) {
+ s = shift;
+ } else {
+ s = shiftx;
+ }
+
+ if (stripe != 0 && !(i & 0x4)) {
+ s = ~s;
+ }
+ if (s & 0x10) {
+ if (tmp0 & (1LL << (i + 16))) {
+ tmp1 |= 1LL << i;
+ } else {
+ tmp1 &= ~(1LL << i);
+ }
+ }
+ }
+
+ uint64_t tmp2 = tmp1;
+ for (i = 0; i <= 38; i++) {
+ int s;
+ if (i & 0x4) {
+ s = shift;
+ } else {
+ s = shiftx;
+ }
+
+ if (s & 0x8) {
+ if (tmp1 & (1LL << (i + 8))) {
+ tmp2 |= 1LL << i;
+ } else {
+ tmp2 &= ~(1LL << i);
+ }
+ }
+ }
+
+ uint64_t tmp3 = tmp2;
+ for (i = 0; i <= 34; i++) {
+ int s;
+ if (i & 0x2) {
+ s = shift;
+ } else {
+ s = shiftx;
+ }
+ if (s & 0x4) {
+ if (tmp2 & (1LL << (i + 4))) {
+ tmp3 |= 1LL << i;
+ } else {
+ tmp3 &= ~(1LL << i);
+ }
+ }
+ }
+
+ uint64_t tmp4 = tmp3;
+ for (i = 0; i <= 32; i++) {
+ int s;
+ if (i & 0x1) {
+ s = shift;
+ } else {
+ s = shiftx;
+ }
+ if (s & 0x2) {
+ if (tmp3 & (1LL << (i + 2))) {
+ tmp4 |= 1LL << i;
+ } else {
+ tmp4 &= ~(1LL << i);
+ }
+ }
+ }
+
+ uint64_t tmp5 = tmp4;
+ for (i = 0; i <= 31; i++) {
+ int s;
+ s = shift;
+ if (s & 0x1) {
+ if (tmp4 & (1LL << (i + 1))) {
+ tmp5 |= 1LL << i;
+ } else {
+ tmp5 &= ~(1LL << i);
+ }
+ }
+ }
+
+ return (int64_t)(int32_t)(uint32_t)tmp5;
+}
+
#ifndef CONFIG_USER_ONLY
static inline hwaddr do_translate_address(CPUMIPSState *env,
diff --git a/target/mips/translate.c b/target/mips/translate.c
index f3753bb..3cff488 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -17578,6 +17578,21 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
}
break;
case NM_P_ROTX:
+ if (rt != 0) {
+ TCGv t0 = tcg_temp_new();
+ TCGv_i32 shift = tcg_const_i32(extract32(ctx->opcode, 0, 5));
+ TCGv_i32 shiftx = tcg_const_i32(extract32(ctx->opcode, 7, 4)
+ << 1);
+ TCGv_i32 stripe = tcg_const_i32((ctx->opcode >> 6) & 1);
+
+ gen_load_gpr(t0, rs);
+ gen_helper_rotx(cpu_gpr[rt], t0, shift, shiftx, stripe);
+ tcg_temp_free(t0);
+
+ tcg_temp_free_i32(shift);
+ tcg_temp_free_i32(shiftx);
+ tcg_temp_free_i32(stripe);
+ }
break;
case NM_P_INS:
switch (((ctx->opcode >> 10) & 2) | ((ctx->opcode >> 5) & 1)) {
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 17/40] target/mips: Implement emulation of nanoMIPS EXTW instruction
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (15 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 16/40] target/mips: Implement emulation of nanoMIPS ROTX instruction Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-19 20:59 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 18/40] target/mips: Add emulation of nanoMIPS 32-bit load and store instructions Stefan Markovic
` (22 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: James Hogan <james.hogan@mips.com>
Implement emulation of nanoMIPS EXTW instruction, which is similar to
the MIPS r6 ALIGN instruction, except that it counts the other way and
in bits instead of bytes. We therefore generalise gen_align() into
gen_align_bits() (which counts in bits instead of bytes and optimises
when bits = size of the word), and implement gen_align() and a new
gen_ext() based on that. Since we need to know the word size to check
for when the number of bits == the word size, the opc argument is
replaced with a wordsz argument (either 32 or 64).
Signed-off-by: James Hogan <james.hogan@mips.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/translate.c | 53 +++++++++++++++++++++++++++++++++----------------
1 file changed, 36 insertions(+), 17 deletions(-)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 3cff488..29d1f19 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -4723,8 +4723,8 @@ static void gen_lsa(DisasContext *ctx, int opc, int rd, int rs, int rt,
return;
}
-static void gen_align(DisasContext *ctx, int opc, int rd, int rs, int rt,
- int bp)
+static void gen_align_bits(DisasContext *ctx, int wordsz, int rd, int rs,
+ int rt, int bits)
{
TCGv t0;
if (rd == 0) {
@@ -4732,35 +4732,40 @@ static void gen_align(DisasContext *ctx, int opc, int rd, int rs, int rt,
return;
}
t0 = tcg_temp_new();
- gen_load_gpr(t0, rt);
- if (bp == 0) {
- switch (opc) {
- case OPC_ALIGN:
+ if (bits == 0 || bits == wordsz) {
+ if (bits == 0) {
+ gen_load_gpr(t0, rt);
+ } else {
+ gen_load_gpr(t0, rs);
+ }
+ switch (wordsz) {
+ case 32:
tcg_gen_ext32s_tl(cpu_gpr[rd], t0);
break;
#if defined(TARGET_MIPS64)
- case OPC_DALIGN:
+ case 64:
tcg_gen_mov_tl(cpu_gpr[rd], t0);
break;
#endif
}
} else {
TCGv t1 = tcg_temp_new();
+ gen_load_gpr(t0, rt);
gen_load_gpr(t1, rs);
- switch (opc) {
- case OPC_ALIGN:
+ switch (wordsz) {
+ case 32:
{
TCGv_i64 t2 = tcg_temp_new_i64();
tcg_gen_concat_tl_i64(t2, t1, t0);
- tcg_gen_shri_i64(t2, t2, 8 * (4 - bp));
+ tcg_gen_shri_i64(t2, t2, 32 - bits);
gen_move_low32(cpu_gpr[rd], t2);
tcg_temp_free_i64(t2);
}
break;
#if defined(TARGET_MIPS64)
- case OPC_DALIGN:
- tcg_gen_shli_tl(t0, t0, 8 * bp);
- tcg_gen_shri_tl(t1, t1, 8 * (8 - bp));
+ case 64:
+ tcg_gen_shli_tl(t0, t0, bits);
+ tcg_gen_shri_tl(t1, t1, 64 - bits);
tcg_gen_or_tl(cpu_gpr[rd], t1, t0);
break;
#endif
@@ -4771,6 +4776,18 @@ static void gen_align(DisasContext *ctx, int opc, int rd, int rs, int rt,
tcg_temp_free(t0);
}
+static void gen_align(DisasContext *ctx, int wordsz, int rd, int rs, int rt,
+ int bp)
+{
+ gen_align_bits(ctx, wordsz, rd, rs, rt, bp * 8);
+}
+
+static void gen_ext(DisasContext *ctx, int wordsz, int rd, int rs, int rt,
+ int shift)
+{
+ gen_align_bits(ctx, wordsz, rd, rs, rt, wordsz - shift);
+}
+
static void gen_bitswap(DisasContext *ctx, int opc, int rd, int rt)
{
TCGv t0;
@@ -14233,8 +14250,7 @@ static void decode_micromips32_opc(CPUMIPSState *env, DisasContext *ctx)
break;
case ALIGN:
check_insn(ctx, ISA_MIPS32R6);
- gen_align(ctx, OPC_ALIGN, rd, rs, rt,
- extract32(ctx->opcode, 9, 2));
+ gen_align(ctx, 32, rd, rs, rt, extract32(ctx->opcode, 9, 2));
break;
case EXT:
gen_bitops(ctx, OPC_EXT, rt, rs, rr, rd);
@@ -17363,6 +17379,9 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
gen_lsa(ctx, OPC_LSA, rd, rs, rt,
extract32(ctx->opcode, 9, 2) - 1);
break;
+ case NM_EXTW:
+ gen_ext(ctx, 32, rd, rs, rt, extract32(ctx->opcode, 6, 5));
+ break;
case NM_POOL32AXF:
gen_pool32axf_nanomips_insn(env, ctx);
break;
@@ -20258,7 +20277,7 @@ static void decode_opc_special3_r6(CPUMIPSState *env, DisasContext *ctx)
switch (op2) {
case OPC_ALIGN:
case OPC_ALIGN_END:
- gen_align(ctx, OPC_ALIGN, rd, rs, rt, sa & 3);
+ gen_align(ctx, 32, rd, rs, rt, sa & 3);
break;
case OPC_BITSWAP:
gen_bitswap(ctx, op2, rd, rt);
@@ -20284,7 +20303,7 @@ static void decode_opc_special3_r6(CPUMIPSState *env, DisasContext *ctx)
switch (op2) {
case OPC_DALIGN:
case OPC_DALIGN_END:
- gen_align(ctx, OPC_DALIGN, rd, rs, rt, sa & 7);
+ gen_align(ctx, 64, rd, rs, rt, sa & 7);
break;
case OPC_DBITSWAP:
gen_bitswap(ctx, op2, rd, rt);
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 18/40] target/mips: Add emulation of nanoMIPS 32-bit load and store instructions
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (16 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 17/40] target/mips: Implement emulation of nanoMIPS EXTW instruction Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-20 4:59 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 19/40] target/mips: Add emulation of nanoMIPS branch instructions Stefan Markovic
` (21 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add emulation of various nanoMIPS load and store instructions.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
---
target/mips/translate.c | 271 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 271 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 29d1f19..5dc6582 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -17668,10 +17668,281 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
}
break;
case NM_P_GP_BH:
+ {
+ uint32_t u = extract32(ctx->opcode, 0, 18);
+ switch ((ctx->opcode >> 18) & 0x7) {
+ case NM_LBGP:
+ gen_ld(ctx, OPC_LB, rt, 28, u);
+ break;
+ case NM_SBGP:
+ gen_st(ctx, OPC_SB, rt, 28, u);
+ break;
+ case NM_LBUGP:
+ gen_ld(ctx, OPC_LBU, rt, 28, u);
+ break;
+ case NM_ADDIUGP_B:
+ gen_arith_imm(ctx, OPC_ADDIU, rt, 28, u);
+ break;
+ case NM_P_GP_LH:
+ u &= ~1;
+ switch (ctx->opcode & 1) {
+ case NM_LHGP:
+ gen_ld(ctx, OPC_LH, rt, 28, u);
+ break;
+ case NM_LHUGP:
+ gen_ld(ctx, OPC_LHU, rt, 28, u);
+ break;
+ }
+ break;
+ case NM_P_GP_SH:
+ u &= ~1;
+ switch (ctx->opcode & 1) {
+ case NM_SHGP:
+ gen_st(ctx, OPC_SH, rt, 28, u);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ break;
+ case NM_P_GP_CP1:
+ u &= ~0x3;
+ switch ((ctx->opcode & 0x3)) {
+ case NM_LWC1GP:
+ gen_cop1_ldst(ctx, OPC_LWC1, rt, 28, u);
+ break;
+ case NM_LDC1GP:
+ gen_cop1_ldst(ctx, OPC_LDC1, rt, 28, u);
+ break;
+ case NM_SWC1GP:
+ gen_cop1_ldst(ctx, OPC_SWC1, rt, 28, u);
+ break;
+ case NM_SDC1GP:
+ gen_cop1_ldst(ctx, OPC_SDC1, rt, 28, u);
+ break;
+ }
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ }
break;
case NM_P_LS_U12:
+ {
+ uint32_t u = extract32(ctx->opcode, 0, 12);
+ switch ((ctx->opcode >> 12) & 0x0f) {
+ case NM_P_PREFU12:
+ if (rt == 31) {
+ /* SYNCI */
+ /* Break the TB to be able to sync copied instructions
+ immediately */
+ ctx->base.is_jmp = DISAS_STOP;
+ } else {
+ /* PREF */
+ /* Treat as NOP. */
+ }
+ break;
+ case NM_LB:
+ gen_ld(ctx, OPC_LB, rt, rs, u);
+ break;
+ case NM_LH:
+ gen_ld(ctx, OPC_LH, rt, rs, u);
+ break;
+ case NM_LW:
+ gen_ld(ctx, OPC_LW, rt, rs, u);
+ break;
+ case NM_LBU:
+ gen_ld(ctx, OPC_LBU, rt, rs, u);
+ break;
+ case NM_LHU:
+ gen_ld(ctx, OPC_LHU, rt, rs, u);
+ break;
+ case NM_SB:
+ gen_st(ctx, OPC_SB, rt, rs, u);
+ break;
+ case NM_SH:
+ gen_st(ctx, OPC_SH, rt, rs, u);
+ break;
+ case NM_SW:
+ gen_st(ctx, OPC_SW, rt, rs, u);
+ break;
+ case NM_LWC1:
+ gen_cop1_ldst(ctx, OPC_LWC1, rt, rs, u);
+ break;
+ case NM_LDC1:
+ gen_cop1_ldst(ctx, OPC_LDC1, rt, rs, u);
+ break;
+ case NM_SWC1:
+ gen_cop1_ldst(ctx, OPC_SWC1, rt, rs, u);
+ break;
+ case NM_SDC1:
+ gen_cop1_ldst(ctx, OPC_SDC1, rt, rs, u);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ }
break;
case NM_P_LS_S9:
+ {
+ int32_t s = (sextract32(ctx->opcode, 15, 1) << 8) |
+ extract32(ctx->opcode, 0, 8);
+ switch ((ctx->opcode >> 8) & 0x07) {
+ case NM_P_LS_S0:
+ switch ((ctx->opcode >> 11) & 0x0f) {
+ case NM_LBS9:
+ gen_ld(ctx, OPC_LB, rt, rs, s);
+ break;
+ case NM_LHS9:
+ gen_ld(ctx, OPC_LH, rt, rs, s);
+ break;
+ case NM_LWS9:
+ gen_ld(ctx, OPC_LW, rt, rs, s);
+ break;
+ case NM_LBUS9:
+ gen_ld(ctx, OPC_LBU, rt, rs, s);
+ break;
+ case NM_LHUS9:
+ gen_ld(ctx, OPC_LHU, rt, rs, s);
+ break;
+ case NM_SBS9:
+ gen_st(ctx, OPC_SB, rt, rs, s);
+ break;
+ case NM_SHS9:
+ gen_st(ctx, OPC_SH, rt, rs, s);
+ break;
+ case NM_SWS9:
+ gen_st(ctx, OPC_SW, rt, rs, s);
+ break;
+ case NM_LWC1S9:
+ gen_cop1_ldst(ctx, OPC_LWC1, rt, rs, s);
+ break;
+ case NM_LDC1S9:
+ gen_cop1_ldst(ctx, OPC_LDC1, rt, rs, s);
+ break;
+ case NM_SWC1S9:
+ gen_cop1_ldst(ctx, OPC_SWC1, rt, rs, s);
+ break;
+ case NM_SDC1S9:
+ gen_cop1_ldst(ctx, OPC_SDC1, rt, rs, s);
+ break;
+ case NM_P_PREFS9:
+ if (rt == 31) {
+ /* SYNCI */
+ /* Break the TB to be able to sync copied instructions
+ immediately */
+ ctx->base.is_jmp = DISAS_STOP;
+ } else {
+ /* PREF */
+ /* Treat as NOP. */
+ }
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ break;
+ case NM_P_LS_S1:
+ switch ((ctx->opcode >> 11) & 0x0f) {
+ case NM_UALH:
+ case NM_UASH:
+ {
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+
+ gen_base_offset_addr(ctx, t0, rs, s);
+
+ switch ((ctx->opcode >> 11) & 0x0f) {
+ case NM_UALH:
+ tcg_gen_qemu_ld_tl(t0, t0, ctx->mem_idx, MO_TESW |
+ MO_UNALN);
+ gen_store_gpr(t0, rt);
+ break;
+ case NM_UASH:
+ gen_load_gpr(t1, rt);
+ tcg_gen_qemu_st_tl(t1, t0, ctx->mem_idx, MO_TEUW |
+ MO_UNALN);
+ break;
+ }
+ tcg_temp_free(t0);
+ tcg_temp_free(t1);
+ }
+ break;
+ case NM_P_LL:
+ switch (ctx->opcode & 0x03) {
+ case NM_LL:
+ gen_ld(ctx, OPC_LL, rt, rs, s);
+ break;
+ case NM_LLWP:
+ break;
+ }
+ break;
+ case NM_P_SC:
+ switch (ctx->opcode & 0x03) {
+ case NM_SC:
+ gen_st_cond(ctx, OPC_SC, rt, rs, s);
+ break;
+ case NM_SCWP:
+ break;
+ }
+ break;
+ case NM_CACHE:
+ check_cp0_enabled(ctx);
+ if (ctx->hflags & MIPS_HFLAG_ITC_CACHE) {
+ gen_cache_operation(ctx, rt, rs, s);
+ }
+ break;
+ }
+ break;
+ case NM_P_LS_WM:
+ case NM_P_LS_UAWM:
+ {
+ int32_t offset = sextract32(ctx->opcode, 15, 1) << 8 |
+ extract32(ctx->opcode, 0, 8);
+ int count = extract32(ctx->opcode, 12, 3);
+ int counter = 0;
+ TCGv va = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+ TCGMemOp memop = ((ctx->opcode >> 8) & 0x07) == NM_P_LS_UAWM ?
+ MO_UNALN : 0;
+
+ count = (count == 0) ? 8 : count;
+ while (counter != count) {
+ int this_rt = ((rt + counter) & 0x1f) | (rt & 0x10);
+ int32_t this_offset = offset + (counter << 2);
+
+ gen_base_offset_addr(ctx, va, rs, this_offset);
+
+ switch (extract32(ctx->opcode, 11, 1)) {
+ case NM_LWM:
+ tcg_gen_qemu_ld_tl(t1, va, ctx->mem_idx,
+ memop | MO_TESL);
+ gen_store_gpr(t1, this_rt);
+ if ((this_rt == rs) &&
+ (counter != (count - 1))) {
+ /* UNPREDICTABLE */
+ }
+ break;
+ case NM_SWM:
+ this_rt = (rt == 0) ? 0 : this_rt;
+ gen_load_gpr(t1, this_rt);
+ tcg_gen_qemu_st_tl(t1, va, ctx->mem_idx,
+ memop | MO_TEUL);
+ break;
+ }
+ counter++;
+ }
+ tcg_temp_free(va);
+ tcg_temp_free(t1);
+ }
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ }
break;
case NM_MOVE_BALC:
break;
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 19/40] target/mips: Add emulation of nanoMIPS branch instructions
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (17 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 18/40] target/mips: Add emulation of nanoMIPS 32-bit load and store instructions Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-20 5:28 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 20/40] target/mips: Implement MT ASE support for nanoMIPS Stefan Markovic
` (20 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Add emulation of various flavors of nanoMIPS branch instructions.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
---
target/mips/translate.c | 277 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 277 insertions(+)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 5dc6582..50b31de 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16871,6 +16871,168 @@ static void gen_pool32axf_nanomips_insn(CPUMIPSState *env, DisasContext *ctx)
}
}
+/* Immediate Value Compact Branches */
+static void gen_compute_imm_branch(DisasContext *ctx, uint32_t opc,
+ int rt, int32_t imm, int32_t offset)
+{
+ int bcond_compute = 0;
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+
+ if (ctx->hflags & MIPS_HFLAG_BMASK) {
+#ifdef MIPS_DEBUG_DISAS
+ LOG_DISAS("Branch in delay / forbidden slot at PC 0x" TARGET_FMT_lx
+ "\n", ctx->base.pc_next);
+#endif
+ generate_exception_end(ctx, EXCP_RI);
+ goto out;
+ }
+
+ gen_load_gpr(t0, rt);
+ tcg_gen_movi_tl(t1, imm);
+ ctx->btarget = addr_add(ctx, ctx->base.pc_next + 4, offset);
+
+ /* Load needed operands and calculate btarget */
+ switch (opc) {
+ case NM_BEQIC:
+ if (rt == 0 && imm == 0) {
+ /* Unconditional branch */
+ } else if (rt == 0 && imm != 0) {
+ /* Treat as NOP */
+ goto out;
+ } else {
+ bcond_compute = 1;
+ }
+ break;
+ case NM_BBEQZC:
+ case NM_BBNEZC:
+ if (imm >= 32 && !(ctx->hflags & MIPS_HFLAG_64)) {
+ generate_exception_end(ctx, EXCP_RI);
+ goto out;
+ } else if (rt == 0 && opc == NM_BBEQZC) {
+ /* Unconditional branch */
+ } else if (rt == 0 && opc == NM_BBNEZC) {
+ /* Treat as NOP */
+ goto out;
+ } else {
+ tcg_gen_shri_tl(t0, t0, imm);
+ tcg_gen_andi_tl(t0, t0, 1);
+ tcg_gen_movi_tl(t1, 0);
+ bcond_compute = 1;
+ }
+ break;
+ case NM_BNEIC:
+ if (rt == 0 && imm == 0) {
+ /* Treat as NOP */
+ goto out;
+ } else if (rt == 0 && imm != 0) {
+ /* Unconditional branch */
+ } else {
+ bcond_compute = 1;
+ }
+ break;
+ case NM_BGEIC:
+ if (rt == 0 && imm == 0) {
+ /* Unconditional branch */
+ } else {
+ bcond_compute = 1;
+ }
+ break;
+ case NM_BLTIC:
+ bcond_compute = 1;
+ break;
+ case NM_BGEIUC:
+ if (rt == 0 && imm == 0) {
+ /* Unconditional branch */
+ } else {
+ bcond_compute = 1;
+ }
+ break;
+ case NM_BLTIUC:
+ bcond_compute = 1;
+ break;
+ default:
+ MIPS_INVAL("Immediate Value Compact branch");
+ generate_exception_end(ctx, EXCP_RI);
+ goto out;
+ }
+
+ if (bcond_compute == 0) {
+ /* Uncoditional compact branch */
+ ctx->hflags |= MIPS_HFLAG_B;
+ /* Generating branch here as compact branches don't have delay slot */
+ gen_branch(ctx, 4);
+ } else {
+ /* Conditional compact branch */
+ TCGLabel *fs = gen_new_label();
+ save_cpu_state(ctx, 0);
+
+ switch (opc) {
+ case NM_BEQIC:
+ tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_EQ), t0, t1, fs);
+ break;
+ case NM_BBEQZC:
+ tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_EQ), t0, t1, fs);
+ break;
+ case NM_BNEIC:
+ tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_NE), t0, t1, fs);
+ break;
+ case NM_BBNEZC:
+ tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_NE), t0, t1, fs);
+ break;
+ case NM_BGEIC:
+ tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_GE), t0, t1, fs);
+ break;
+ case NM_BLTIC:
+ tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_LT), t0, t1, fs);
+ break;
+ case NM_BGEIUC:
+ tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_GEU), t0, t1, fs);
+ break;
+ case NM_BLTIUC:
+ tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_LTU), t0, t1, fs);
+ break;
+ }
+
+ /* Generating branch here as compact branches don't have delay slot */
+ gen_goto_tb(ctx, 1, ctx->btarget);
+ gen_set_label(fs);
+
+ ctx->hflags |= MIPS_HFLAG_FBNSLOT;
+ }
+
+out:
+ tcg_temp_free(t0);
+ tcg_temp_free(t1);
+}
+
+/* P.BALRSC type nanoMIPS R6 branches: BALRSC and BRSC */
+static void gen_compute_nanomips_pbalrsc_branch(DisasContext *ctx, int rs,
+ int rt)
+{
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+
+ /* load rs */
+ gen_load_gpr(t0, rs);
+
+ /* link */
+ if (rt != 0) {
+ tcg_gen_movi_tl(cpu_gpr[rt], ctx->base.pc_next + 4);
+ }
+
+ /* calculate btarget */
+ tcg_gen_shli_tl(t0, t0, 1);
+ tcg_gen_movi_tl(t1, ctx->base.pc_next + 4);
+ gen_op_addr_add(ctx, btarget, t1, t0);
+
+ ctx->hflags |= MIPS_HFLAG_BR;
+ /* Generating branch here as compact branches don't have delay slot */
+ gen_branch(ctx, 4);
+
+ tcg_temp_free(t0);
+ tcg_temp_free(t1);
+}
static void gen_p_lsx(DisasContext *ctx, int rd, int rs, int rt)
{
@@ -17945,16 +18107,131 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
}
break;
case NM_MOVE_BALC:
+ {
+ TCGv t0 = tcg_temp_new();
+ int32_t s = sextract32(ctx->opcode, 0, 1) << 21 |
+ extract32(ctx->opcode, 1, 20) << 1;
+ rd = ((ctx->opcode >> 24) & 1) == 0 ? 4 : 5;
+ rt = decode_gpr_gpr4_zero(extract32(ctx->opcode, 25, 1) << 3 |
+ extract32(ctx->opcode, 21, 3));
+ gen_load_gpr(t0, rt);
+ tcg_gen_mov_tl(cpu_gpr[rd], t0);
+ gen_compute_branch(ctx, OPC_BGEZAL, 4, 0, 0, s, 0);
+ tcg_temp_free(t0);
+ }
break;
case NM_P_BAL:
+ {
+ int32_t s = sextract32(ctx->opcode, 0, 1) << 25 |
+ extract32(ctx->opcode, 1, 24) << 1;
+
+ if (((ctx->opcode >> 25) & 1) == 0) {
+ /* BC */
+ gen_compute_branch(ctx, OPC_BEQ, 4, 0, 0, s, 0);
+ } else {
+ /* BALC */
+ gen_compute_branch(ctx, OPC_BGEZAL, 4, 0, 0, s, 0);
+ }
+ }
break;
case NM_P_J:
+ switch ((ctx->opcode >> 12) & 0x0f) {
+ case NM_JALRC:
+ case NM_JALRC_HB:
+ gen_compute_branch(ctx, OPC_JALR, 4, rs, rt, 0, 0);
+ break;
+ case NM_P_BALRSC:
+ gen_compute_nanomips_pbalrsc_branch(ctx, rs, rt);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
break;
case NM_P_BR1:
+ {
+ int32_t s = sextract32(ctx->opcode, 0, 1) << 14 |
+ extract32(ctx->opcode, 1, 13) << 1;
+ switch ((ctx->opcode >> 14) & 0x03) {
+ case NM_BEQC:
+ gen_compute_branch(ctx, OPC_BEQ, 4, rs, rt, s, 0);
+ break;
+ case NM_P_BR3A:
+ {
+ int32_t s = sextract32(ctx->opcode, 0, 1) << 14 |
+ extract32(ctx->opcode, 1, 13) << 1;
+ check_cp1_enabled(ctx);
+ switch ((ctx->opcode >> 16) & 0x1f) {
+ case NM_BC1EQZC:
+ gen_compute_branch1_r6(ctx, OPC_BC1EQZ, rt, s, 0);
+ break;
+ case NM_BC1NEZC:
+ gen_compute_branch1_r6(ctx, OPC_BC1NEZ, rt, s, 0);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ }
+ break;
+ case NM_BGEC:
+ if (rs == rt) {
+ gen_compute_compact_branch(ctx, OPC_BC, rs, rt, s);
+ } else {
+ gen_compute_compact_branch(ctx, OPC_BGEC, rs, rt, s);
+ }
+ break;
+ case NM_BGEUC:
+ if (rs == rt || rt == 0) {
+ gen_compute_compact_branch(ctx, OPC_BC, 0, 0, s);
+ } else if (rs == 0) {
+ gen_compute_compact_branch(ctx, OPC_BEQZC, rt, 0, s);
+ } else {
+ gen_compute_compact_branch(ctx, OPC_BGEUC, rs, rt, s);
+ }
+ break;
+ }
+ }
break;
case NM_P_BR2:
+ {
+ int32_t s = sextract32(ctx->opcode, 0, 1) << 14 |
+ extract32(ctx->opcode, 1, 13) << 1;
+ switch ((ctx->opcode >> 14) & 0x03) {
+ case NM_BNEC:
+ gen_compute_branch(ctx, OPC_BNE, 4, rs, rt, s, 0);
+ break;
+ case NM_BLTC:
+ if (rs != 0 && rt != 0 && rs == rt) {
+ /* NOP */
+ ctx->hflags |= MIPS_HFLAG_FBNSLOT;
+ } else {
+ gen_compute_compact_branch(ctx, OPC_BLTC, rs, rt, s);
+ }
+ break;
+ case NM_BLTUC:
+ if (rs == 0 || rs == rt) {
+ /* NOP */
+ ctx->hflags |= MIPS_HFLAG_FBNSLOT;
+ } else {
+ gen_compute_compact_branch(ctx, OPC_BLTUC, rs, rt, s);
+ }
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ }
break;
case NM_P_BRI:
+ {
+ int32_t s = sextract32(ctx->opcode, 0, 1) << 11 |
+ extract32(ctx->opcode, 1, 10) << 1;
+ uint32_t u = extract32(ctx->opcode, 11, 7);
+
+ gen_compute_imm_branch(ctx, extract32(ctx->opcode, 18, 3),
+ rt, u, s);
+ }
break;
default:
generate_exception_end(ctx, EXCP_RI);
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 20/40] target/mips: Implement MT ASE support for nanoMIPS
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (18 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 19/40] target/mips: Add emulation of nanoMIPS branch instructions Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-21 15:19 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 21/40] target/mips: Implement DSP " Stefan Markovic
` (19 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of MT ASE instructions for nanoMIPS.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/translate.c | 85 +++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 83 insertions(+), 2 deletions(-)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 50b31de..c8a9ba0 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -16604,7 +16604,7 @@ static void gen_pool16c_nanomips_insn(DisasContext *ctx)
}
}
-static void gen_pool32a0_nanomips_insn(DisasContext *ctx)
+static void gen_pool32a0_nanomips_insn(CPUMIPSState *env, DisasContext *ctx)
{
int rt = (ctx->opcode >> 21) & 0x1f;
int rs = (ctx->opcode >> 16) & 0x1f;
@@ -16777,6 +16777,87 @@ static void gen_pool32a0_nanomips_insn(DisasContext *ctx)
tcg_temp_free(t0);
}
break;
+ case NM_D_E_MT_VPE:
+ {
+ uint8_t sc = (ctx->opcode >> 10) & 1;
+ TCGv t0 = tcg_temp_new();
+
+ switch (sc) {
+ case 0:
+ if (rs == 1) {
+ /* DMT */
+ check_insn(ctx, ASE_MT);
+ gen_helper_dmt(t0);
+ gen_store_gpr(t0, rt);
+ } else if (rs == 0) {
+ /* DVPE */
+ check_insn(ctx, ASE_MT);
+ gen_helper_dvpe(t0, cpu_env);
+ gen_store_gpr(t0, rt);
+ } else {
+ generate_exception_end(ctx, EXCP_RI);
+ }
+ break;
+ case 1:
+ if (rs == 1) {
+ /* EMT */
+ check_insn(ctx, ASE_MT);
+ gen_helper_emt(t0);
+ gen_store_gpr(t0, rt);
+ } else if (rs == 0) {
+ /* EVPE */
+ check_insn(ctx, ASE_MT);
+ gen_helper_evpe(t0, cpu_env);
+ gen_store_gpr(t0, rt);
+ } else {
+ generate_exception_end(ctx, EXCP_RI);
+ }
+ break;
+ }
+
+ tcg_temp_free(t0);
+ }
+ break;
+ case NM_FORK:
+ check_insn(ctx, ASE_MT);
+ {
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+
+ gen_load_gpr(t0, rt);
+ gen_load_gpr(t1, rs);
+ gen_helper_fork(t0, t1);
+ tcg_temp_free(t0);
+ tcg_temp_free(t1);
+ }
+ break;
+ case NM_MFTR:
+ case NM_MFHTR:
+ check_insn(ctx, ASE_MT);
+ if (rd == 0) {
+ /* Treat as NOP. */
+ return;
+ }
+ gen_mftr(env, ctx, rs, rt, (ctx->opcode >> 10) & 1,
+ (ctx->opcode >> 11) & 0x1f, (ctx->opcode >> 3) & 1);
+ break;
+ case NM_MTTR:
+ case NM_MTHTR:
+ check_insn(ctx, ASE_MT);
+ gen_mttr(env, ctx, rs, rt, (ctx->opcode >> 10) & 1,
+ (ctx->opcode >> 11) & 0x1f, (ctx->opcode >> 3) & 1);
+ break;
+ case NM_YIELD:
+ check_insn(ctx, ASE_MT);
+ {
+ TCGv t0 = tcg_temp_new();
+
+ gen_load_gpr(t0, rs);
+ gen_helper_yield(t0, cpu_env, t0);
+ gen_store_gpr(t0, rt);
+ tcg_temp_free(t0);
+ }
+ break;
#endif
default:
generate_exception_end(ctx, EXCP_RI);
@@ -17526,7 +17607,7 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
case NM_POOL32A:
switch (ctx->opcode & 0x07) {
case NM_POOL32A0:
- gen_pool32a0_nanomips_insn(ctx);
+ gen_pool32a0_nanomips_insn(env, ctx);
break;
case NM_POOL32A7:
{
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 21/40] target/mips: Implement DSP ASE support for nanoMIPS
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (19 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 20/40] target/mips: Implement MT ASE support for nanoMIPS Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-21 15:52 ` Richard Henderson
2018-07-21 18:04 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 22/40] target/mips: Add handling of branch delay slots " Stefan Markovic
` (18 subsequent siblings)
39 siblings, 2 replies; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Stefan Markovic <smarkovic@wavecomp.com>
Add emulation of DSP ASE instructions for nanoMIPS.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/translate.c | 2072 ++++++++++++++++++++++++++++++++++++++---------
1 file changed, 1681 insertions(+), 391 deletions(-)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index c8a9ba0..d7454a6 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -14064,6 +14064,527 @@ static void gen_pool32fxf(DisasContext *ctx, int rt, int rs)
}
}
+
+static void gen_pool32a5_nanomips_insn(DisasContext *ctx, int opc,
+ int rd, int rs, int rt)
+{
+ int ret = rd;
+
+ TCGv t1;
+ TCGv v1_t;
+ TCGv v2_t;
+
+ t1 = tcg_temp_new();
+ v1_t = tcg_temp_new();
+ v2_t = tcg_temp_new();
+
+ gen_load_gpr(v1_t, rs);
+ gen_load_gpr(v2_t, rt);
+
+ switch (opc) {
+ case OPC_CMP_EQ_PH:
+ check_dsp(ctx);
+ gen_helper_cmp_eq_ph(v1_t, v2_t, cpu_env);
+ break;
+ case OPC_CMP_LT_PH:
+ check_dsp(ctx);
+ gen_helper_cmp_lt_ph(v1_t, v2_t, cpu_env);
+ break;
+ case OPC_CMP_LE_PH:
+ check_dsp(ctx);
+ gen_helper_cmp_le_ph(v1_t, v2_t, cpu_env);
+ break;
+ case OPC_CMPU_EQ_QB:
+ check_dsp(ctx);
+ gen_helper_cmpu_eq_qb(v1_t, v2_t, cpu_env);
+ break;
+ case OPC_CMPU_LT_QB:
+ check_dsp(ctx);
+ gen_helper_cmpu_lt_qb(v1_t, v2_t, cpu_env);
+ break;
+ case OPC_CMPU_LE_QB:
+ check_dsp(ctx);
+ gen_helper_cmpu_le_qb(v1_t, v2_t, cpu_env);
+ break;
+ case OPC_CMPGU_EQ_QB:
+ check_dsp(ctx);
+ gen_helper_cmpgu_eq_qb(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case OPC_CMPGU_LT_QB:
+ check_dsp(ctx);
+ gen_helper_cmpgu_lt_qb(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case OPC_CMPGU_LE_QB:
+ check_dsp(ctx);
+ gen_helper_cmpgu_le_qb(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case OPC_CMPGDU_EQ_QB:
+ check_dspr2(ctx);
+ gen_helper_cmpgu_eq_qb(t1, v1_t, v2_t);
+ tcg_gen_mov_tl(cpu_gpr[ret], t1);
+ tcg_gen_andi_tl(cpu_dspctrl, cpu_dspctrl, 0xF0FFFFFF);
+ tcg_gen_shli_tl(t1, t1, 24);
+ tcg_gen_or_tl(cpu_dspctrl, cpu_dspctrl, t1);
+ break;
+ case OPC_CMPGDU_LT_QB:
+ check_dspr2(ctx);
+ gen_helper_cmpgu_lt_qb(t1, v1_t, v2_t);
+ tcg_gen_mov_tl(cpu_gpr[ret], t1);
+ tcg_gen_andi_tl(cpu_dspctrl, cpu_dspctrl, 0xF0FFFFFF);
+ tcg_gen_shli_tl(t1, t1, 24);
+ tcg_gen_or_tl(cpu_dspctrl, cpu_dspctrl, t1);
+ break;
+ case OPC_CMPGDU_LE_QB:
+ check_dspr2(ctx);
+ gen_helper_cmpgu_le_qb(t1, v1_t, v2_t);
+ tcg_gen_mov_tl(cpu_gpr[ret], t1);
+ tcg_gen_andi_tl(cpu_dspctrl, cpu_dspctrl, 0xF0FFFFFF);
+ tcg_gen_shli_tl(t1, t1, 24);
+ tcg_gen_or_tl(cpu_dspctrl, cpu_dspctrl, t1);
+ break;
+ case OPC_PACKRL_PH:
+ check_dsp(ctx);
+ gen_helper_packrl_ph(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case OPC_PICK_QB:
+ check_dsp(ctx);
+ gen_helper_pick_qb(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_PICK_PH:
+ check_dsp(ctx);
+ gen_helper_pick_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_ADDQ_S_W:
+ check_dsp(ctx);
+ gen_helper_addq_s_w(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_SUBQ_S_W:
+ check_dsp(ctx);
+ gen_helper_subq_s_w(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_ADDSC:
+ check_dsp(ctx);
+ gen_helper_addsc(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_ADDWC:
+ check_dsp(ctx);
+ gen_helper_addwc(cpu_gpr[rd], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_ADDQ_S_PH:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* ADDQ_PH */
+ check_dsp(ctx);
+ gen_helper_addq_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case 1:
+ /* ADDQ_S_PH */
+ check_dsp(ctx);
+ gen_helper_addq_s_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ }
+ break;
+ case OPC_ADDQH_R_PH:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* ADDQH_PH */
+ gen_helper_addqh_ph(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case 1:
+ /* ADDQH_R_PH */
+ gen_helper_addqh_r_ph(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ }
+ break;
+ case OPC_ADDQH_R_W:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* ADDQH_W */
+ gen_helper_addqh_w(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case 1:
+ /* ADDQH_R_W */
+ gen_helper_addqh_r_w(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ }
+ break;
+ case OPC_ADDU_S_QB:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* ADDU_QB */
+ check_dsp(ctx);
+ gen_helper_addu_qb(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case 1:
+ /* ADDU_S_QB */
+ check_dsp(ctx);
+ gen_helper_addu_s_qb(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ }
+ break;
+ case OPC_ADDU_S_PH:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* ADDU_PH */
+ check_dspr2(ctx);
+ gen_helper_addu_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case 1:
+ /* ADDU_S_PH */
+ check_dspr2(ctx);
+ gen_helper_addu_s_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ }
+ break;
+ case OPC_ADDUH_R_QB:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* ADDUH_QB */
+ gen_helper_adduh_qb(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case 1:
+ /* ADDUH_R_QB */
+ gen_helper_adduh_r_qb(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ }
+ break;
+ case OPC_SHRAV_R_PH:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* SHRAV_PH */
+ check_dsp(ctx);
+ gen_helper_shra_ph(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case 1:
+ /* SHRAV_R_PH */
+ check_dsp(ctx);
+ gen_helper_shra_r_ph(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ }
+ break;
+ case OPC_SHRAV_R_QB:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* SHRAV_QB */
+ check_dspr2(ctx);
+ gen_helper_shra_qb(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case 1:
+ /* SHRAV_R_QB */
+ check_dspr2(ctx);
+ gen_helper_shra_r_qb(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ }
+ break;
+ case OPC_SUBQ_S_PH:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* SUBQ_PH */
+ check_dsp(ctx);
+ gen_helper_subq_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case 1:
+ /* SUBQ_S_PH */
+ check_dsp(ctx);
+ gen_helper_subq_s_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ }
+ break;
+ case OPC_SUBQH_R_PH:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* SUBQH_PH */
+ gen_helper_subqh_ph(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case 1:
+ /* SUBQH_R_PH */
+ gen_helper_subqh_r_ph(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ }
+ break;
+ case OPC_SUBQH_R_W:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* SUBQH_W */
+ gen_helper_subqh_w(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case 1:
+ /* SUBQH_R_W */
+ gen_helper_subqh_r_w(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ }
+ break;
+ case OPC_SUBU_S_QB:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* SUBU_QB */
+ check_dsp(ctx);
+ gen_helper_subu_qb(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case 1:
+ /* SUBU_S_QB */
+ check_dsp(ctx);
+ gen_helper_subu_s_qb(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ }
+ break;
+ case OPC_SUBU_S_PH:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* SUBU_PH */
+ check_dspr2(ctx);
+ gen_helper_subu_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case 1:
+ /* SUBU_S_PH */
+ check_dspr2(ctx);
+ gen_helper_subu_s_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ }
+ break;
+ case OPC_SUBUH_R_QB:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* SUBUH_QB */
+ gen_helper_subuh_qb(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case 1:
+ /* SUBUH_R_QB */
+ gen_helper_subuh_r_qb(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ }
+ break;
+ case OPC_SHLLV_S_PH:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* SHLLV_PH */
+ check_dsp(ctx);
+ gen_helper_shll_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case 1:
+ /* SHLLV_S_PH */
+ check_dsp(ctx);
+ gen_helper_shll_s_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ }
+ break;
+ case OPC_PRECR_SRA_R_PH_W:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* PRECR_SRA_PH_W */
+ check_dspr2(ctx);
+ {
+ TCGv_i32 sa_t = tcg_const_i32(rd);
+ gen_helper_precr_sra_ph_w(cpu_gpr[rt], sa_t, v1_t,
+ cpu_gpr[rt]);
+ tcg_temp_free_i32(sa_t);
+ }
+ break;
+ case 1:
+ /* PRECR_SRA_R_PH_W */
+ check_dspr2(ctx);
+ {
+ TCGv_i32 sa_t = tcg_const_i32(rd);
+ gen_helper_precr_sra_r_ph_w(cpu_gpr[rt], sa_t, v1_t,
+ cpu_gpr[rt]);
+ tcg_temp_free_i32(sa_t);
+ }
+ break;
+ }
+ break;
+ case OPC_MULEU_S_PH_QBL:
+ check_dsp(ctx);
+ gen_helper_muleu_s_ph_qbl(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_MULEU_S_PH_QBR:
+ check_dsp(ctx);
+ gen_helper_muleu_s_ph_qbr(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_MULQ_RS_PH:
+ check_dsp(ctx);
+ gen_helper_mulq_rs_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_MULQ_S_PH:
+ check_dspr2(ctx);
+ gen_helper_mulq_s_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_MULQ_RS_W:
+ gen_helper_mulq_rs_w(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_MULQ_S_W:
+ gen_helper_mulq_s_w(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_APPEND:
+ {
+ TCGv t0;
+
+ t0 = tcg_temp_new();
+ gen_load_gpr(t0, rs);
+
+ if (rd != 0) {
+ tcg_gen_deposit_tl(cpu_gpr[rt], t0, cpu_gpr[rt], rd, 32 - rd);
+ }
+ tcg_gen_ext32s_tl(cpu_gpr[rt], cpu_gpr[rt]);
+ }
+ break;
+ case OPC_MODSUB:
+ check_dsp(ctx);
+ gen_helper_modsub(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case OPC_SHRAV_R_W:
+ check_dsp(ctx);
+ gen_helper_shra_r_w(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case OPC_SHRLV_PH:
+ check_dspr2(ctx);
+ gen_helper_shrl_ph(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case OPC_SHRLV_QB:
+ check_dsp(ctx);
+ gen_helper_shrl_qb(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case OPC_SHLLV_QB:
+ check_dsp(ctx);
+ gen_helper_shll_qb(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_SHLLV_S_W:
+ check_dsp(ctx);
+ gen_helper_shll_s_w(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_SHILO:
+ {
+ TCGv t0;
+ TCGv t1;
+ t0 = tcg_temp_new();
+ t1 = tcg_temp_new();
+
+ int16_t imm = (ctx->opcode >> 16) & 0x3F;
+
+ tcg_gen_movi_tl(t0, rd >> 3);
+ tcg_gen_movi_tl(t1, imm);
+
+ gen_helper_shilo(t0, t1, cpu_env);
+ }
+ break;
+ case OPC_MULEQ_S_W_PHL:
+ check_dsp(ctx);
+ gen_helper_muleq_s_w_phl(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_MULEQ_S_W_PHR:
+ check_dsp(ctx);
+ gen_helper_muleq_s_w_phr(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_MUL_S_PH:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* MUL_PH */
+ gen_helper_mul_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case 1:
+ /* MUL_S_PH */
+ gen_helper_mul_s_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ }
+ break;
+ case OPC_PRECR_QB_PH:
+ check_dspr2(ctx);
+ gen_helper_precr_qb_ph(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case OPC_PRECRQ_QB_PH:
+ check_dsp(ctx);
+ gen_helper_precrq_qb_ph(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case OPC_PRECRQ_PH_W:
+ check_dsp(ctx);
+ gen_helper_precrq_ph_w(cpu_gpr[ret], v1_t, v2_t);
+ break;
+ case OPC_PRECRQ_RS_PH_W:
+ check_dsp(ctx);
+ gen_helper_precrq_rs_ph_w(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_PRECRQU_S_QB_PH:
+ check_dsp(ctx);
+ gen_helper_precrqu_s_qb_ph(cpu_gpr[ret], v1_t, v2_t, cpu_env);
+ break;
+ case OPC_SHRA_R_W:
+ {
+ TCGv t0;
+ t0 = tcg_temp_new();
+ tcg_gen_movi_tl(t0, rd);
+
+ check_dsp(ctx);
+ gen_helper_shra_r_w(cpu_gpr[rt], t0, v1_t);
+ break;
+ }
+ case OPC_SHRA_R_PH:
+ {
+ TCGv t0;
+ t0 = tcg_temp_new();
+ tcg_gen_movi_tl(t0, rd >> 1);
+
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case 0:
+ /* SHRA_PH */
+ check_dsp(ctx);
+ gen_helper_shra_ph(cpu_gpr[rt], t0, v1_t);
+ break;
+ case 1:
+ /* SHRA_R_PH */
+ check_dsp(ctx);
+ gen_helper_shra_r_ph(cpu_gpr[rt], t0, v1_t);
+ break;
+ }
+ }
+ break;
+ case OPC_SHLL_S_PH:
+ {
+ TCGv t0;
+ t0 = tcg_temp_new();
+ tcg_gen_movi_tl(t0, rd >> 1);
+
+ switch ((ctx->opcode >> 10) & 0x3) {
+ case 0:
+ /* SHLL_PH */
+ check_dsp(ctx);
+ gen_helper_shll_ph(cpu_gpr[rt], t0, v1_t, cpu_env);
+ break;
+ case 2:
+ /* SHLL_S_PH */
+ check_dsp(ctx);
+ gen_helper_shll_s_ph(cpu_gpr[rt], t0, v1_t, cpu_env);
+ break;
+ }
+ }
+ break;
+ case OPC_SHLL_S_W:
+ {
+ TCGv t0;
+ t0 = tcg_temp_new();
+ tcg_gen_movi_tl(t0, rd);
+
+ check_dsp(ctx);
+ gen_helper_shll_s_w(cpu_gpr[rt], t0, v1_t, cpu_env);
+ break;
+ }
+ break;
+ case OPC_REPL_PH:
+ check_dsp(ctx);
+ {
+ int16_t imm;
+ imm = (ctx->opcode >> 11) & 0x03FF;
+ imm = (int16_t)(imm << 6) >> 6;
+ tcg_gen_movi_tl(cpu_gpr[rt], \
+ (target_long)((int32_t)imm << 16 | \
+ (uint16_t)imm));
+ }
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+}
+
+
static void decode_micromips32_opc(CPUMIPSState *env, DisasContext *ctx)
{
int32_t offset;
@@ -16370,508 +16891,1253 @@ enum {
NM_LWC1X = 0x0a,
NM_LDC1X = 0x0e,
- NM_LWUX = 0x07,
- NM_SWC1X = 0x0b,
- NM_SDC1X = 0x0f,
+ NM_LWUX = 0x07,
+ NM_SWC1X = 0x0b,
+ NM_SDC1X = 0x0f,
+
+ NM_LHXS = 0x04,
+ NM_LWXS = 0x08,
+ NM_LDXS = 0x0c,
+
+ NM_SHXS = 0x05,
+ NM_SWXS = 0x09,
+ NM_SDXS = 0x0d,
+
+ NM_LHUXS = 0x06,
+ NM_LWC1XS = 0x0a,
+ NM_LDC1XS = 0x0e,
+
+ NM_LWUXS = 0x07,
+ NM_SWC1XS = 0x0b,
+ NM_SDC1XS = 0x0f,
+};
+
+/* ERETx instruction pool */
+enum {
+ NM_ERET = 0x00,
+ NM_ERETNC = 0x01,
+};
+
+/* POOL32FxF_{0, 1} insturction pool */
+enum {
+ NM_CFC1 = 0x40,
+ NM_CTC1 = 0x60,
+ NM_MFC1 = 0x80,
+ NM_MTC1 = 0xa0,
+ NM_MFHC1 = 0xc0,
+ NM_MTHC1 = 0xe0,
+
+ NM_CVT_S_PL = 0x84,
+ NM_CVT_S_PU = 0xa4,
+
+ NM_CVT_L_S = 0x004,
+ NM_CVT_L_D = 0x104,
+ NM_CVT_W_S = 0x024,
+ NM_CVT_W_D = 0x124,
+
+ NM_RSQRT_S = 0x008,
+ NM_RSQRT_D = 0x108,
+
+ NM_SQRT_S = 0x028,
+ NM_SQRT_D = 0x128,
+
+ NM_RECIP_S = 0x048,
+ NM_RECIP_D = 0x148,
+
+ NM_FLOOR_L_S = 0x00c,
+ NM_FLOOR_L_D = 0x10c,
+
+ NM_FLOOR_W_S = 0x02c,
+ NM_FLOOR_W_D = 0x12c,
+
+ NM_CEIL_L_S = 0x04c,
+ NM_CEIL_L_D = 0x14c,
+ NM_CEIL_W_S = 0x06c,
+ NM_CEIL_W_D = 0x16c,
+ NM_TRUNC_L_S = 0x08c,
+ NM_TRUNC_L_D = 0x18c,
+ NM_TRUNC_W_S = 0x0ac,
+ NM_TRUNC_W_D = 0x1ac,
+ NM_ROUND_L_S = 0x0cc,
+ NM_ROUND_L_D = 0x1cc,
+ NM_ROUND_W_S = 0x0ec,
+ NM_ROUND_W_D = 0x1ec,
+
+ NM_MOV_S = 0x01,
+ NM_MOV_D = 0x81,
+ NM_ABS_S = 0x0d,
+ NM_ABS_D = 0x8d,
+ NM_NEG_S = 0x2d,
+ NM_NEG_D = 0xad,
+ NM_CVT_D_S = 0x04d,
+ NM_CVT_D_W = 0x0cd,
+ NM_CVT_D_L = 0x14d,
+ NM_CVT_S_D = 0x06d,
+ NM_CVT_S_W = 0x0ed,
+ NM_CVT_S_L = 0x16d,
+};
+
+/* P.LL instruction pool */
+enum {
+ NM_LL = 0x00,
+ NM_LLWP = 0x01,
+};
+
+/* P.SC instruction pool */
+enum {
+ NM_SC = 0x00,
+ NM_SCWP = 0x01,
+};
+
+/* P.DVP instruction pool */
+enum {
+ NM_DVP = 0x00,
+ NM_EVP = 0x01,
+};
+
+
+/*
+ *
+ * nanoMIPS decoding engine
+ *
+ */
+
+static int decode_gpr_gpr3(int r)
+{
+ static const int map[] = { 16, 17, 18, 19, 4, 5, 6, 7 };
+
+ return map[r & 0x7];
+}
+
+/* Used for 16-bit store instructions. */
+static int decode_gpr_gpr3_src_store(int r)
+{
+ static const int map[] = { 0, 17, 18, 19, 4, 5, 6, 7 };
+
+ return map[r & 0x7];
+}
+
+static int decode_gpr_gpr4(int r)
+{
+ static const int map[] = { 8, 9, 10, 11, 4, 5, 6, 7,
+ 16, 17, 18, 19, 20, 21, 22, 23 };
+
+ return map[r & 0xf];
+}
+
+/* Used for 16-bit store instructions. */
+static int decode_gpr_gpr4_zero(int r)
+{
+ static const int map[] = { 8, 9, 10, 0, 4, 5, 6, 7,
+ 16, 17, 18, 19, 20, 21, 22, 23 };
+
+ return map[r & 0xf];
+}
+
+
+/* extraction utilities */
+
+#define NANOMIPS_EXTRACT_RD(op) ((op >> 7) & 0x7)
+#define NANOMIPS_EXTRACT_RS(op) ((op >> 4) & 0x7)
+#define NANOMIPS_EXTRACT_RS2(op) uMIPS_RS(op)
+#define NANOMIPS_EXTRACT_RS1(op) ((op >> 1) & 0x7)
+#define NANOMIPS_EXTRACT_RD5(op) ((op >> 5) & 0x1f)
+#define NANOMIPS_EXTRACT_RS5(op) (op & 0x1f)
+
+
+static void gen_adjust_sp(DisasContext *ctx, int u)
+{
+ TCGv tsp = tcg_temp_new();
+ gen_base_offset_addr(ctx, tsp, 29, u);
+ gen_store_gpr(tsp, 29);
+ tcg_temp_free(tsp);
+}
+
+static void gen_save(DisasContext *ctx, uint8_t rt, uint8_t count,
+ uint8_t gp, uint16_t u)
+{
+ int counter = 0;
+ TCGv va = tcg_temp_new();
+ TCGv t0 = tcg_temp_new();
+
+ while (counter != count) {
+ bool use_gp = gp && (counter == count - 1);
+ int this_rt = use_gp ? 28 : (rt & 0x10) | ((rt + counter) & 0x1f);
+ int this_offset = -((counter + 1) << 2);
+ gen_base_offset_addr(ctx, va, 29, this_offset);
+ gen_load_gpr(t0, this_rt);
+ tcg_gen_qemu_st_tl(t0, va, ctx->mem_idx,
+ MO_TEUL | ctx->default_tcg_memop_mask);
+ counter++;
+ }
- NM_LHXS = 0x04,
- NM_LWXS = 0x08,
- NM_LDXS = 0x0c,
+ /* adjust stack pointer */
+ gen_adjust_sp(ctx, -u);
- NM_SHXS = 0x05,
- NM_SWXS = 0x09,
- NM_SDXS = 0x0d,
+ tcg_temp_free(t0);
+ tcg_temp_free(va);
+}
- NM_LHUXS = 0x06,
- NM_LWC1XS = 0x0a,
- NM_LDC1XS = 0x0e,
+static void gen_restore(DisasContext *ctx, uint8_t rt, uint8_t count,
+ uint8_t gp, uint16_t u)
+{
+ int counter = 0;
+ TCGv va = tcg_temp_new();
+ TCGv t0 = tcg_temp_new();
- NM_LWUXS = 0x07,
- NM_SWC1XS = 0x0b,
- NM_SDC1XS = 0x0f,
-};
+ while (counter != count) {
+ bool use_gp = gp && (counter == count - 1);
+ int this_rt = use_gp ? 28 : (rt & 0x10) | ((rt + counter) & 0x1f);
+ int this_offset = u - ((counter + 1) << 2);
+ gen_base_offset_addr(ctx, va, 29, this_offset);
+ tcg_gen_qemu_ld_tl(t0, va, ctx->mem_idx, MO_TESL |
+ ctx->default_tcg_memop_mask);
+ tcg_gen_ext32s_tl(t0, t0);
+ gen_store_gpr(t0, this_rt);
+ counter++;
+ }
-/* ERETx instruction pool */
-enum {
- NM_ERET = 0x00,
- NM_ERETNC = 0x01,
-};
+ /* adjust stack pointer */
+ gen_adjust_sp(ctx, u);
-/* POOL32FxF_{0, 1} insturction pool */
-enum {
- NM_CFC1 = 0x40,
- NM_CTC1 = 0x60,
- NM_MFC1 = 0x80,
- NM_MTC1 = 0xa0,
- NM_MFHC1 = 0xc0,
- NM_MTHC1 = 0xe0,
+ tcg_temp_free(t0);
+ tcg_temp_free(va);
+}
- NM_CVT_S_PL = 0x84,
- NM_CVT_S_PU = 0xa4,
+static void gen_pool16c_nanomips_insn(DisasContext *ctx)
+{
+ int rt = decode_gpr_gpr3(NANOMIPS_EXTRACT_RD(ctx->opcode));
+ int rs = decode_gpr_gpr3(NANOMIPS_EXTRACT_RS(ctx->opcode));
- NM_CVT_L_S = 0x004,
- NM_CVT_L_D = 0x104,
- NM_CVT_W_S = 0x024,
- NM_CVT_W_D = 0x124,
+ switch ((ctx->opcode >> 2) & 0x3) {
+ case NM_NOT16:
+ gen_logic(ctx, OPC_NOR, rt, rs, 0);
+ break;
+ case NM_AND16:
+ gen_logic(ctx, OPC_AND, rt, rt, rs);
+ break;
+ case NM_XOR16:
+ gen_logic(ctx, OPC_XOR, rt, rt, rs);
+ break;
+ case NM_OR16:
+ gen_logic(ctx, OPC_OR, rt, rt, rs);
+ break;
+ }
+}
- NM_RSQRT_S = 0x008,
- NM_RSQRT_D = 0x108,
+static void gen_pool32a0_nanomips_insn(CPUMIPSState *env, DisasContext *ctx)
+{
+ int rt = (ctx->opcode >> 21) & 0x1f;
+ int rs = (ctx->opcode >> 16) & 0x1f;
+ int rd = (ctx->opcode >> 11) & 0x1f;
- NM_SQRT_S = 0x028,
- NM_SQRT_D = 0x128,
+ switch ((ctx->opcode >> 3) & 0x7f) {
+ case NM_P_TRAP:
+ switch ((ctx->opcode >> 10) & 0x1) {
+ case NM_TEQ:
+ gen_trap(ctx, OPC_TEQ, rs, rt, -1);
+ break;
+ case NM_TNE:
+ gen_trap(ctx, OPC_TNE, rs, rt, -1);
+ break;
+ }
+ break;
+ case NM_RDHWR:
+ gen_rdhwr(ctx, rt, rs, extract32(ctx->opcode, 11, 3));
+ break;
+ case NM_SEB:
+ gen_bshfl(ctx, OPC_SEB, rs, rt);
+ break;
+ case NM_SEH:
+ gen_bshfl(ctx, OPC_SEH, rs, rt);
+ break;
+ case NM_SLLV:
+ gen_shift(ctx, OPC_SLLV, rd, rt, rs);
+ break;
+ case NM_SRLV:
+ gen_shift(ctx, OPC_SRLV, rd, rt, rs);
+ break;
+ case NM_SRAV:
+ gen_shift(ctx, OPC_SRAV, rd, rt, rs);
+ break;
+ case NM_ROTRV:
+ gen_shift(ctx, OPC_ROTRV, rd, rt, rs);
+ break;
+ case NM_ADD:
+ gen_arith(ctx, OPC_ADD, rd, rs, rt);
+ break;
+ case NM_ADDU:
+ gen_arith(ctx, OPC_ADDU, rd, rs, rt);
+ break;
+ case NM_SUB:
+ gen_arith(ctx, OPC_SUB, rd, rs, rt);
+ break;
+ case NM_SUBU:
+ gen_arith(ctx, OPC_SUBU, rd, rs, rt);
+ break;
+ case NM_P_CMOVE:
+ switch ((ctx->opcode >> 10) & 1) {
+ case NM_MOVZ:
+ gen_cond_move(ctx, OPC_MOVZ, rd, rs, rt);
+ break;
+ case NM_MOVN:
+ gen_cond_move(ctx, OPC_MOVN, rd, rs, rt);
+ break;
+ }
+ break;
+ case NM_AND:
+ gen_logic(ctx, OPC_AND, rd, rs, rt);
+ break;
+ case NM_OR:
+ gen_logic(ctx, OPC_OR, rd, rs, rt);
+ break;
+ case NM_NOR:
+ gen_logic(ctx, OPC_NOR, rd, rs, rt);
+ break;
+ case NM_XOR:
+ gen_logic(ctx, OPC_XOR, rd, rs, rt);
+ break;
+ case NM_SLT:
+ gen_slt(ctx, OPC_SLT, rd, rs, rt);
+ break;
+ case NM_P_SLTU:
+ if (rd == 0) {
+ /* P_DVP */
+#ifndef CONFIG_USER_ONLY
+ TCGv t0 = tcg_temp_new();
+ switch ((ctx->opcode >> 10) & 1) {
+ case NM_DVP:
+ if (ctx->vp) {
+ check_cp0_enabled(ctx);
+ gen_helper_dvp(t0, cpu_env);
+ gen_store_gpr(t0, rt);
+ }
+ break;
+ case NM_EVP:
+ if (ctx->vp) {
+ check_cp0_enabled(ctx);
+ gen_helper_evp(t0, cpu_env);
+ gen_store_gpr(t0, rt);
+ }
+ break;
+ }
+ tcg_temp_free(t0);
+#endif
+ } else {
+ gen_slt(ctx, OPC_SLTU, rd, rs, rt);
+ }
+ break;
+ case NM_SOV:
+ {
+ TCGv t0 = tcg_temp_local_new();
+ TCGv t1 = tcg_temp_new();
+ TCGv t2 = tcg_temp_new();
+ TCGLabel *l1 = gen_new_label();
- NM_RECIP_S = 0x048,
- NM_RECIP_D = 0x148,
+ gen_load_gpr(t1, rs);
+ gen_load_gpr(t2, rt);
+ tcg_gen_add_tl(t0, t1, t2);
+ tcg_gen_ext32s_tl(t0, t0);
+ tcg_gen_xor_tl(t1, t1, t2);
+ tcg_gen_xor_tl(t2, t0, t2);
+ tcg_gen_andc_tl(t1, t2, t1);
- NM_FLOOR_L_S = 0x00c,
- NM_FLOOR_L_D = 0x10c,
+ tcg_gen_movi_tl(t0, 0);
+ tcg_gen_brcondi_tl(TCG_COND_GE, t1, 0, l1);
+ /* operands of same sign, result different sign */
- NM_FLOOR_W_S = 0x02c,
- NM_FLOOR_W_D = 0x12c,
+ tcg_gen_movi_tl(t0, 1);
+ gen_set_label(l1);
+ gen_store_gpr(t0, rd);
- NM_CEIL_L_S = 0x04c,
- NM_CEIL_L_D = 0x14c,
- NM_CEIL_W_S = 0x06c,
- NM_CEIL_W_D = 0x16c,
- NM_TRUNC_L_S = 0x08c,
- NM_TRUNC_L_D = 0x18c,
- NM_TRUNC_W_S = 0x0ac,
- NM_TRUNC_W_D = 0x1ac,
- NM_ROUND_L_S = 0x0cc,
- NM_ROUND_L_D = 0x1cc,
- NM_ROUND_W_S = 0x0ec,
- NM_ROUND_W_D = 0x1ec,
+ tcg_temp_free(t0);
+ tcg_temp_free(t1);
+ tcg_temp_free(t2);
+ }
+ break;
+ case NM_MUL:
+ gen_r6_muldiv(ctx, R6_OPC_MUL, rd, rs, rt);
+ break;
+ case NM_MUH:
+ gen_r6_muldiv(ctx, R6_OPC_MUH, rd, rs, rt);
+ break;
+ case NM_MULU:
+ gen_r6_muldiv(ctx, R6_OPC_MULU, rd, rs, rt);
+ break;
+ case NM_MUHU:
+ gen_r6_muldiv(ctx, R6_OPC_MUHU, rd, rs, rt);
+ break;
+ case NM_DIV:
+ gen_r6_muldiv(ctx, R6_OPC_DIV, rd, rs, rt);
+ break;
+ case NM_MOD:
+ gen_r6_muldiv(ctx, R6_OPC_MOD, rd, rs, rt);
+ break;
+ case NM_DIVU:
+ gen_r6_muldiv(ctx, R6_OPC_DIVU, rd, rs, rt);
+ break;
+ case NM_MODU:
+ gen_r6_muldiv(ctx, R6_OPC_MODU, rd, rs, rt);
+ break;
+#ifndef CONFIG_USER_ONLY
+ case NM_MFC0:
+ check_cp0_enabled(ctx);
+ if (rt == 0) {
+ /* Treat as NOP. */
+ break;
+ }
+ gen_mfc0(ctx, cpu_gpr[rt], rs, (ctx->opcode >> 11) & 0x7);
+ break;
+ case NM_MTC0:
+ check_cp0_enabled(ctx);
+ {
+ TCGv t0 = tcg_temp_new();
- NM_MOV_S = 0x01,
- NM_MOV_D = 0x81,
- NM_ABS_S = 0x0d,
- NM_ABS_D = 0x8d,
- NM_NEG_S = 0x2d,
- NM_NEG_D = 0xad,
- NM_CVT_D_S = 0x04d,
- NM_CVT_D_W = 0x0cd,
- NM_CVT_D_L = 0x14d,
- NM_CVT_S_D = 0x06d,
- NM_CVT_S_W = 0x0ed,
- NM_CVT_S_L = 0x16d,
-};
+ gen_load_gpr(t0, rt);
+ gen_mtc0(ctx, t0, rs, (ctx->opcode >> 11) & 0x7);
+ tcg_temp_free(t0);
+ }
+ break;
+ case NM_D_E_MT_VPE:
+ {
+ uint8_t sc = (ctx->opcode >> 10) & 1;
+ TCGv t0 = tcg_temp_new();
-/* P.LL instruction pool */
-enum {
- NM_LL = 0x00,
- NM_LLWP = 0x01,
-};
+ switch (sc) {
+ case 0:
+ if (rs == 1) {
+ /* DMT */
+ check_insn(ctx, ASE_MT);
+ gen_helper_dmt(t0);
+ gen_store_gpr(t0, rt);
+ } else if (rs == 0) {
+ /* DVPE */
+ check_insn(ctx, ASE_MT);
+ gen_helper_dvpe(t0, cpu_env);
+ gen_store_gpr(t0, rt);
+ } else {
+ generate_exception_end(ctx, EXCP_RI);
+ }
+ break;
+ case 1:
+ if (rs == 1) {
+ /* EMT */
+ check_insn(ctx, ASE_MT);
+ gen_helper_emt(t0);
+ gen_store_gpr(t0, rt);
+ } else if (rs == 0) {
+ /* EVPE */
+ check_insn(ctx, ASE_MT);
+ gen_helper_evpe(t0, cpu_env);
+ gen_store_gpr(t0, rt);
+ } else {
+ generate_exception_end(ctx, EXCP_RI);
+ }
+ break;
+ }
-/* P.SC instruction pool */
-enum {
- NM_SC = 0x00,
- NM_SCWP = 0x01,
-};
+ tcg_temp_free(t0);
+ }
+ break;
+ case NM_FORK:
+ check_insn(ctx, ASE_MT);
+ {
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
-/* P.DVP instruction pool */
-enum {
- NM_DVP = 0x00,
- NM_EVP = 0x01,
-};
+ gen_load_gpr(t0, rt);
+ gen_load_gpr(t1, rs);
+ gen_helper_fork(t0, t1);
+ tcg_temp_free(t0);
+ tcg_temp_free(t1);
+ }
+ break;
+ case NM_MFTR:
+ case NM_MFHTR:
+ check_insn(ctx, ASE_MT);
+ if (rd == 0) {
+ /* Treat as NOP. */
+ return;
+ }
+ gen_mftr(env, ctx, rs, rt, (ctx->opcode >> 10) & 1,
+ (ctx->opcode >> 11) & 0x1f, (ctx->opcode >> 3) & 1);
+ break;
+ case NM_MTTR:
+ case NM_MTHTR:
+ check_insn(ctx, ASE_MT);
+ gen_mttr(env, ctx, rs, rt, (ctx->opcode >> 10) & 1,
+ (ctx->opcode >> 11) & 0x1f, (ctx->opcode >> 3) & 1);
+ break;
+ case NM_YIELD:
+ check_insn(ctx, ASE_MT);
+ {
+ TCGv t0 = tcg_temp_new();
+ gen_load_gpr(t0, rs);
+ gen_helper_yield(t0, cpu_env, t0);
+ gen_store_gpr(t0, rt);
+ tcg_temp_free(t0);
+ }
+ break;
+#endif
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+}
-/*
- *
- * nanoMIPS decoding engine
- *
- */
-static int decode_gpr_gpr3(int r)
+static void gen_pool32axf_1_5_nanomips_insn(DisasContext *ctx, uint32_t opc,
+ int ret, int v1, int v2)
{
- static const int map[] = { 16, 17, 18, 19, 4, 5, 6, 7 };
+ TCGv_i32 t0;
+ TCGv v0_t;
+ TCGv v1_t;
- return map[r & 0x7];
-}
+ t0 = tcg_temp_new_i32();
-/* Used for 16-bit store instructions. */
-static int decode_gpr_gpr3_src_store(int r)
-{
- static const int map[] = { 0, 17, 18, 19, 4, 5, 6, 7 };
+ v0_t = tcg_temp_new();
+ v1_t = tcg_temp_new();
- return map[r & 0x7];
-}
+ tcg_gen_movi_i32(t0, v2 >> 3);
-static int decode_gpr_gpr4(int r)
-{
- static const int map[] = { 8, 9, 10, 11, 4, 5, 6, 7,
- 16, 17, 18, 19, 20, 21, 22, 23 };
+ gen_load_gpr(v0_t, ret);
+ gen_load_gpr(v1_t, v1);
- return map[r & 0xf];
-}
+ switch (opc) {
+ case NM_MAQ_S_W_PHR:
+ check_dsp(ctx);
+ gen_helper_maq_s_w_phr(t0, v1_t, v0_t, cpu_env);
+ break;
+ case NM_MAQ_S_W_PHL:
+ check_dsp(ctx);
+ gen_helper_maq_s_w_phl(t0, v1_t, v0_t, cpu_env);
+ break;
+ case NM_MAQ_SA_W_PHR:
+ check_dsp(ctx);
+ gen_helper_maq_sa_w_phr(t0, v1_t, v0_t, cpu_env);
+ break;
+ case NM_MAQ_SA_W_PHL:
+ check_dsp(ctx);
+ gen_helper_maq_sa_w_phl(t0, v1_t, v0_t, cpu_env);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
-/* Used for 16-bit store instructions. */
-static int decode_gpr_gpr4_zero(int r)
-{
- static const int map[] = { 8, 9, 10, 0, 4, 5, 6, 7,
- 16, 17, 18, 19, 20, 21, 22, 23 };
+ tcg_temp_free_i32(t0);
- return map[r & 0xf];
+ tcg_temp_free(v0_t);
+ tcg_temp_free(v1_t);
}
-/* extraction utilities */
+static void gen_pool32axf_1_nanomips_insn(DisasContext *ctx, uint32_t opc,
+ int ret, int v1, int v2)
+{
+ int16_t imm;
-#define NANOMIPS_EXTRACT_RD(op) ((op >> 7) & 0x7)
-#define NANOMIPS_EXTRACT_RS(op) ((op >> 4) & 0x7)
-#define NANOMIPS_EXTRACT_RS2(op) uMIPS_RS(op)
-#define NANOMIPS_EXTRACT_RS1(op) ((op >> 1) & 0x7)
-#define NANOMIPS_EXTRACT_RD5(op) ((op >> 5) & 0x1f)
-#define NANOMIPS_EXTRACT_RS5(op) (op & 0x1f)
+ TCGv t0;
+ TCGv t1;
+ TCGv v0_t;
+ TCGv v1_t;
+ t0 = tcg_temp_new();
+ t1 = tcg_temp_new();
-static void gen_adjust_sp(DisasContext *ctx, int u)
-{
- TCGv tsp = tcg_temp_new();
- gen_base_offset_addr(ctx, tsp, 29, u);
- gen_store_gpr(tsp, 29);
- tcg_temp_free(tsp);
-}
+ v0_t = tcg_temp_new();
+ v1_t = tcg_temp_new();
-static void gen_save(DisasContext *ctx, uint8_t rt, uint8_t count,
- uint8_t gp, uint16_t u)
-{
- int counter = 0;
- TCGv va = tcg_temp_new();
- TCGv t0 = tcg_temp_new();
+ gen_load_gpr(v0_t, ret);
+ gen_load_gpr(v1_t, v1);
- while (counter != count) {
- bool use_gp = gp && (counter == count - 1);
- int this_rt = use_gp ? 28 : (rt & 0x10) | ((rt + counter) & 0x1f);
- int this_offset = -((counter + 1) << 2);
- gen_base_offset_addr(ctx, va, 29, this_offset);
- gen_load_gpr(t0, this_rt);
- tcg_gen_qemu_st_tl(t0, va, ctx->mem_idx,
- (MO_TEUL | ctx->default_tcg_memop_mask));
- counter++;
+ switch (opc) {
+ case NM_POOL32AXF_1_0:
+ switch ((ctx->opcode >> 12) & 0x03) {
+ case NM_MFHI:
+ gen_HILO(ctx, OPC_MFHI, v2 >> 3, ret);
+ break;
+ case NM_MFLO:
+ gen_HILO(ctx, OPC_MFLO, v2 >> 3, ret);
+ break;
+ case NM_MTHI:
+ gen_HILO(ctx, OPC_MTHI, v2 >> 3, v1);
+ break;
+ case NM_MTLO:
+ gen_HILO(ctx, OPC_MTLO, v2 >> 3, v1);
+ break;
+ }
+ break;
+ case NM_POOL32AXF_1_1:
+ switch ((ctx->opcode >> 12) & 0x03) {
+ case NM_MTHLIP:
+ tcg_gen_movi_tl(t0, v2);
+ gen_helper_mthlip(t0, v1_t, cpu_env);
+ break;
+ case NM_SHILOV:
+ tcg_gen_movi_tl(t0, v2 >> 3);
+ gen_helper_shilo(t0, v1_t, cpu_env);
+ break;
+ }
+ break;
+ case NM_POOL32AXF_1_3:
+ imm = (ctx->opcode >> 14) & 0x07F;
+ switch ((ctx->opcode >> 12) & 0x03) {
+ case NM_RDDSP:
+ tcg_gen_movi_tl(t0, imm);
+ gen_helper_rddsp(cpu_gpr[ret], t0, cpu_env);
+ break;
+ case NM_WRDSP:
+ tcg_gen_movi_tl(t0, imm);
+ gen_helper_wrdsp(v0_t, t0, cpu_env);
+ break;
+ case NM_EXTP:
+ tcg_gen_movi_tl(t0, v2 >> 3);
+ tcg_gen_movi_tl(t1, v1);
+ gen_helper_extp(cpu_gpr[ret], t0, t1, cpu_env);
+ break;
+ case NM_EXTPDP:
+ tcg_gen_movi_tl(t0, v2 >> 3);
+ tcg_gen_movi_tl(t1, v1);
+ gen_helper_extpdp(cpu_gpr[ret], t0, t1, cpu_env);
+ break;
+ }
+ break;
+ case NM_POOL32AXF_1_4:
+ tcg_gen_movi_tl(t0, v2 >> 2);
+ switch ((ctx->opcode >> 12) & 0x01) {
+ case NM_SHLL_QB:
+ check_dsp(ctx);
+ gen_helper_shll_qb(cpu_gpr[ret], t0, v1_t, cpu_env);
+ break;
+ case NM_SHRL_QB:
+ check_dsp(ctx);
+ gen_helper_shrl_qb(cpu_gpr[ret], t0, v1_t);
+ break;
+ }
+ break;
+ case NM_POOL32AXF_1_5:
+ {
+ uint32_t opc = (ctx->opcode >> 12) & 0x03;
+ gen_pool32axf_1_5_nanomips_insn(ctx, opc, ret, v1, v2);
+ }
+ break;
+ case NM_POOL32AXF_1_7:
+ tcg_gen_movi_tl(t0, v2 >> 3);
+ tcg_gen_movi_tl(t1, v1);
+ switch ((ctx->opcode >> 12) & 0x03) {
+ case NM_EXTR_W:
+ gen_helper_extr_w(cpu_gpr[ret], t0, t1, cpu_env);
+ break;
+ case NM_EXTR_R_W:
+ gen_helper_extr_r_w(cpu_gpr[ret], t0, t1, cpu_env);
+ break;
+ case NM_EXTR_RS_W:
+ gen_helper_extr_rs_w(cpu_gpr[ret], t0, t1, cpu_env);
+ break;
+ case NM_EXTR_S_H:
+ gen_helper_extr_s_h(cpu_gpr[ret], t0, t1, cpu_env);
+ break;
+ }
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
}
- /* adjust stack pointer */
- gen_adjust_sp(ctx, -u);
-
tcg_temp_free(t0);
- tcg_temp_free(va);
+ tcg_temp_free(t1);
+
+ tcg_temp_free(v0_t);
+ tcg_temp_free(v1_t);
}
-static void gen_restore(DisasContext *ctx, uint8_t rt, uint8_t count,
- uint8_t gp, uint16_t u)
+static void gen_pool32axf_2_multiply(DisasContext *ctx, uint32_t opc,
+ int ret, int v1, int v2)
{
- int counter = 0;
- TCGv va = tcg_temp_new();
- TCGv t0 = tcg_temp_new();
+ TCGv_i32 t0;
+ TCGv v0_t;
+ TCGv v1_t;
- while (counter != count) {
- bool use_gp = gp && (counter == count - 1);
- int this_rt = use_gp ? 28 : (rt & 0x10) | ((rt + counter) & 0x1f);
- int this_offset = u - ((counter + 1) << 2);
- gen_base_offset_addr(ctx, va, 29, this_offset);
- tcg_gen_qemu_ld_tl(t0, va, ctx->mem_idx, MO_TESL |
- ctx->default_tcg_memop_mask);
- tcg_gen_ext32s_tl(t0, t0);
- gen_store_gpr(t0, this_rt);
- counter++;
- }
+ t0 = tcg_temp_new_i32();
- /* adjust stack pointer */
- gen_adjust_sp(ctx, u);
+ v0_t = tcg_temp_new();
+ v1_t = tcg_temp_new();
- tcg_temp_free(t0);
- tcg_temp_free(va);
-}
+ tcg_gen_movi_i32(t0, v2 >> 3);
-static void gen_pool16c_nanomips_insn(DisasContext *ctx)
-{
- int rt = decode_gpr_gpr3(NANOMIPS_EXTRACT_RD(ctx->opcode));
- int rs = decode_gpr_gpr3(NANOMIPS_EXTRACT_RS(ctx->opcode));
+ gen_load_gpr(v0_t, ret);
+ gen_load_gpr(v1_t, v1);
- switch ((ctx->opcode >> 2) & 0x3) {
- case NM_NOT16:
- gen_logic(ctx, OPC_NOR, rt, rs, 0);
+ switch (opc) {
+ case NM_POOL32AXF_2_0_7:
+ switch ((ctx->opcode >> 9) & 0x07) {
+ case NM_DPA_W_PH:
+ check_dspr2(ctx);
+ gen_helper_dpa_w_ph(t0, v1_t, v0_t, cpu_env);
+ break;
+ case NM_DPAQ_S_W_PH:
+ check_dsp(ctx);
+ gen_helper_dpaq_s_w_ph(t0, v1_t, v0_t, cpu_env);
+ break;
+ case NM_DPS_W_PH:
+ check_dspr2(ctx);
+ gen_helper_dps_w_ph(t0, v1_t, v0_t, cpu_env);
+ break;
+ case NM_DPSQ_S_W_PH:
+ check_dsp(ctx);
+ gen_helper_dpsq_s_w_ph(t0, v1_t, v0_t, cpu_env);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
break;
- case NM_AND16:
- gen_logic(ctx, OPC_AND, rt, rt, rs);
+ case NM_POOL32AXF_2_8_15:
+ switch ((ctx->opcode >> 9) & 0x07) {
+ case NM_DPAX_W_PH:
+ check_dspr2(ctx);
+ gen_helper_dpax_w_ph(t0, v0_t, v1_t, cpu_env);
+ break;
+ case NM_DPAQ_SA_L_W:
+ check_dsp(ctx);
+ gen_helper_dpaq_sa_l_w(t0, v0_t, v1_t, cpu_env);
+ break;
+ case NM_DPSX_W_PH:
+ check_dspr2(ctx);
+ gen_helper_dpsx_w_ph(t0, v0_t, v1_t, cpu_env);
+ break;
+ case NM_DPSQ_SA_L_W:
+ check_dsp(ctx);
+ gen_helper_dpsq_sa_l_w(t0, v0_t, v1_t, cpu_env);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
break;
- case NM_XOR16:
- gen_logic(ctx, OPC_XOR, rt, rt, rs);
+ case NM_POOL32AXF_2_16_23:
+ switch ((ctx->opcode >> 9) & 0x07) {
+ case NM_DPAU_H_QBL:
+ check_dsp(ctx);
+ gen_helper_dpau_h_qbl(t0, v0_t, v1_t, cpu_env);
+ break;
+ case NM_DPAQX_S_W_PH:
+ check_dspr2(ctx);
+ gen_helper_dpaqx_s_w_ph(t0, v0_t, v1_t, cpu_env);
+ break;
+ case NM_DPSU_H_QBL:
+ check_dsp(ctx);
+ gen_helper_dpsu_h_qbl(t0, v0_t, v1_t, cpu_env);
+ break;
+ case NM_DPSQX_S_W_PH:
+ check_dspr2(ctx);
+ gen_helper_dpsqx_s_w_ph(t0, v0_t, v1_t, cpu_env);
+ break;
+ case NM_MULSA_W_PH:
+ check_dspr2(ctx);
+ gen_helper_mulsa_w_ph(t0, v0_t, v1_t, cpu_env);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
break;
- case NM_OR16:
- gen_logic(ctx, OPC_OR, rt, rt, rs);
+ case NM_POOL32AXF_2_24_31:
+ switch ((ctx->opcode >> 9) & 0x07) {
+ case NM_DPAU_H_QBR:
+ check_dsp(ctx);
+ gen_helper_dpau_h_qbr(t0, v1_t, v0_t, cpu_env);
+ break;
+ case NM_DPAQX_SA_W_PH:
+ check_dspr2(ctx);
+ gen_helper_dpaqx_sa_w_ph(t0, v1_t, v0_t, cpu_env);
+ break;
+ case NM_DPSU_H_QBR:
+ check_dsp(ctx);
+ gen_helper_dpsu_h_qbr(t0, v1_t, v0_t, cpu_env);
+ break;
+ case NM_DPSQX_SA_W_PH:
+ check_dspr2(ctx);
+ gen_helper_dpsqx_sa_w_ph(t0, v1_t, v0_t, cpu_env);
+ break;
+ case NM_MULSAQ_S_W_PH:
+ check_dsp(ctx);
+ gen_helper_mulsaq_s_w_ph(t0, v1_t, v0_t, cpu_env);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
break;
}
+
+ tcg_temp_free_i32(t0);
+
+ tcg_temp_free(v0_t);
+ tcg_temp_free(v1_t);
}
-static void gen_pool32a0_nanomips_insn(CPUMIPSState *env, DisasContext *ctx)
+static void gen_pool32axf_2_nanomips_insn(DisasContext *ctx, uint32_t opc,
+ int ret, int v1, int v2)
{
- int rt = (ctx->opcode >> 21) & 0x1f;
- int rs = (ctx->opcode >> 16) & 0x1f;
- int rd = (ctx->opcode >> 11) & 0x1f;
+ TCGv t0;
+ TCGv t1;
- switch ((ctx->opcode >> 3) & 0x7f) {
- case NM_P_TRAP:
- switch ((ctx->opcode >> 10) & 0x1) {
- case NM_TEQ:
- gen_trap(ctx, OPC_TEQ, rs, rt, -1);
+ TCGv v0_t;
+ TCGv v1_t;
+
+ t0 = tcg_temp_new();
+ t1 = tcg_temp_new();
+
+ v0_t = tcg_temp_new();
+ v1_t = tcg_temp_new();
+
+ gen_load_gpr(v0_t, ret);
+ gen_load_gpr(v1_t, v1);
+
+ switch (opc) {
+ case NM_POOL32AXF_2_0_7:
+ switch ((ctx->opcode >> 9) & 0x07) {
+ case NM_DPA_W_PH:
+ case NM_DPAQ_S_W_PH:
+ case NM_DPS_W_PH:
+ case NM_DPSQ_S_W_PH:
+ gen_pool32axf_2_multiply(ctx, opc, ret, v1, v2);
+ break;
+ case NM_BALIGN:
+ gen_load_gpr(t0, v1);
+ v2 &= 3;
+ if (v2 != 0 && v2 != 2) {
+ tcg_gen_shli_tl(cpu_gpr[ret], cpu_gpr[ret], 8 * v2);
+ tcg_gen_ext32u_tl(t0, t0);
+ tcg_gen_shri_tl(t0, t0, 8 * (4 - v2));
+ tcg_gen_or_tl(cpu_gpr[ret], cpu_gpr[ret], t0);
+ }
+ tcg_gen_ext32s_tl(cpu_gpr[ret], cpu_gpr[ret]);
break;
- case NM_TNE:
- gen_trap(ctx, OPC_TNE, rs, rt, -1);
+ case NM_MADD:
+ {
+ int acc = (ctx->opcode >> 14) & 3;
+
+ gen_load_gpr(t0, ret);
+ gen_load_gpr(t1, v1);
+ TCGv_i64 t2 = tcg_temp_new_i64();
+ TCGv_i64 t3 = tcg_temp_new_i64();
+
+ tcg_gen_ext_tl_i64(t2, t0);
+ tcg_gen_ext_tl_i64(t3, t1);
+ tcg_gen_mul_i64(t2, t2, t3);
+ tcg_gen_concat_tl_i64(t3, cpu_LO[acc], cpu_HI[acc]);
+ tcg_gen_add_i64(t2, t2, t3);
+ tcg_temp_free_i64(t3);
+ gen_move_low32(cpu_LO[acc], t2);
+ gen_move_high32(cpu_HI[acc], t2);
+ tcg_temp_free_i64(t2);
+ }
+ break;
+ case NM_MULT:
+ {
+ int acc = (ctx->opcode >> 14) & 3;
+
+ gen_load_gpr(t0, v1);
+ gen_load_gpr(t1, ret);
+
+ TCGv_i32 t2 = tcg_temp_new_i32();
+ TCGv_i32 t3 = tcg_temp_new_i32();
+ tcg_gen_trunc_tl_i32(t2, t0);
+ tcg_gen_trunc_tl_i32(t3, t1);
+ tcg_gen_muls2_i32(t2, t3, t2, t3);
+ tcg_gen_ext_i32_tl(cpu_LO[acc], t2);
+ tcg_gen_ext_i32_tl(cpu_HI[acc], t3);
+ tcg_temp_free_i32(t2);
+ tcg_temp_free_i32(t3);
+ }
+ break;
+ case NM_EXTRV_W:
+ gen_load_gpr(v1_t, v1);
+ tcg_gen_movi_tl(t0, v2 >> 3);
+ gen_helper_extr_w(cpu_gpr[ret], t0, v1_t, cpu_env);
break;
}
break;
- case NM_RDHWR:
- gen_rdhwr(ctx, rt, rs, extract32(ctx->opcode, 11, 3));
- break;
- case NM_SEB:
- gen_bshfl(ctx, OPC_SEB, rs, rt);
- break;
- case NM_SEH:
- gen_bshfl(ctx, OPC_SEH, rs, rt);
- break;
- case NM_SLLV:
- gen_shift(ctx, OPC_SLLV, rd, rt, rs);
- break;
- case NM_SRLV:
- gen_shift(ctx, OPC_SRLV, rd, rt, rs);
- break;
- case NM_SRAV:
- gen_shift(ctx, OPC_SRAV, rd, rt, rs);
- break;
- case NM_ROTRV:
- gen_shift(ctx, OPC_ROTRV, rd, rt, rs);
- break;
- case NM_ADD:
- gen_arith(ctx, OPC_ADD, rd, rs, rt);
- break;
- case NM_ADDU:
- gen_arith(ctx, OPC_ADDU, rd, rs, rt);
- break;
- case NM_SUB:
- gen_arith(ctx, OPC_SUB, rd, rs, rt);
- break;
- case NM_SUBU:
- gen_arith(ctx, OPC_SUBU, rd, rs, rt);
- break;
- case NM_P_CMOVE:
- switch ((ctx->opcode >> 10) & 1) {
- case NM_MOVZ:
- gen_cond_move(ctx, OPC_MOVZ, rd, rs, rt);
+ case NM_POOL32AXF_2_8_15:
+ switch ((ctx->opcode >> 9) & 0x07) {
+ case NM_DPAX_W_PH:
+ case NM_DPAQ_SA_L_W:
+ case NM_DPSX_W_PH:
+ case NM_DPSQ_SA_L_W:
+ gen_pool32axf_2_multiply(ctx, opc, ret, v1, v2);
break;
- case NM_MOVN:
- gen_cond_move(ctx, OPC_MOVN, rd, rs, rt);
+ case NM_MADDU:
+ {
+ int acc = (ctx->opcode >> 14) & 3;
+
+ TCGv_i64 t2 = tcg_temp_new_i64();
+ TCGv_i64 t3 = tcg_temp_new_i64();
+
+ gen_load_gpr(t0, v1);
+ gen_load_gpr(t1, ret);
+
+ tcg_gen_ext32u_tl(t0, t0);
+ tcg_gen_ext32u_tl(t1, t1);
+ tcg_gen_extu_tl_i64(t2, t0);
+ tcg_gen_extu_tl_i64(t3, t1);
+ tcg_gen_mul_i64(t2, t2, t3);
+ tcg_gen_concat_tl_i64(t3, cpu_LO[acc], cpu_HI[acc]);
+ tcg_gen_add_i64(t2, t2, t3);
+ tcg_temp_free_i64(t3);
+ gen_move_low32(cpu_LO[acc], t2);
+ gen_move_high32(cpu_HI[acc], t2);
+ tcg_temp_free_i64(t2);
+ }
+ break;
+ case NM_MULTU:
+ {
+ int acc = (ctx->opcode >> 14) & 3;
+
+ TCGv_i32 t2 = tcg_temp_new_i32();
+ TCGv_i32 t3 = tcg_temp_new_i32();
+
+ gen_load_gpr(t0, v1);
+ gen_load_gpr(t1, ret);
+
+ tcg_gen_trunc_tl_i32(t2, t0);
+ tcg_gen_trunc_tl_i32(t3, t1);
+ tcg_gen_mulu2_i32(t2, t3, t2, t3);
+ tcg_gen_ext_i32_tl(cpu_LO[acc], t2);
+ tcg_gen_ext_i32_tl(cpu_HI[acc], t3);
+ tcg_temp_free_i32(t2);
+ tcg_temp_free_i32(t3);
+ }
+ break;
+ case NM_EXTRV_R_W:
+ tcg_gen_movi_tl(t0, v2 >> 3);
+ gen_helper_extr_r_w(cpu_gpr[ret], t0, v1_t, cpu_env);
break;
}
break;
- case NM_AND:
- gen_logic(ctx, OPC_AND, rd, rs, rt);
- break;
- case NM_OR:
- gen_logic(ctx, OPC_OR, rd, rs, rt);
- break;
- case NM_NOR:
- gen_logic(ctx, OPC_NOR, rd, rs, rt);
- break;
- case NM_XOR:
- gen_logic(ctx, OPC_XOR, rd, rs, rt);
- break;
- case NM_SLT:
- gen_slt(ctx, OPC_SLT, rd, rs, rt);
- break;
- case NM_P_SLTU:
- if (rd == 0) {
- /* P_DVP */
-#ifndef CONFIG_USER_ONLY
- TCGv t0 = tcg_temp_new();
- switch ((ctx->opcode >> 10) & 1) {
- case NM_DVP:
- if (ctx->vp) {
- check_cp0_enabled(ctx);
- gen_helper_dvp(t0, cpu_env);
- gen_store_gpr(t0, rt);
- }
- break;
- case NM_EVP:
- if (ctx->vp) {
- check_cp0_enabled(ctx);
- gen_helper_evp(t0, cpu_env);
- gen_store_gpr(t0, rt);
- }
- break;
+ case NM_POOL32AXF_2_16_23:
+ switch ((ctx->opcode >> 9) & 0x07) {
+ case NM_DPAU_H_QBL:
+ case NM_DPAQX_S_W_PH:
+ case NM_DPSU_H_QBL:
+ case NM_DPSQX_S_W_PH:
+ case NM_MULSA_W_PH:
+ gen_pool32axf_2_multiply(ctx, opc, ret, v1, v2);
+ break;
+ case NM_EXTPV:
+ tcg_gen_movi_tl(t0, v2 >> 3);
+ gen_helper_extp(cpu_gpr[ret], t0, v1_t, cpu_env);
+ break;
+ case NM_MSUB:
+ {
+ int acc = (ctx->opcode >> 14) & 3;
+
+ TCGv_i64 t2 = tcg_temp_new_i64();
+ TCGv_i64 t3 = tcg_temp_new_i64();
+
+ gen_load_gpr(t0, v1);
+ gen_load_gpr(t1, ret);
+
+ tcg_gen_ext_tl_i64(t2, t0);
+ tcg_gen_ext_tl_i64(t3, t1);
+ tcg_gen_mul_i64(t2, t2, t3);
+ tcg_gen_concat_tl_i64(t3, cpu_LO[acc], cpu_HI[acc]);
+ tcg_gen_sub_i64(t2, t3, t2);
+ tcg_temp_free_i64(t3);
+ gen_move_low32(cpu_LO[acc], t2);
+ gen_move_high32(cpu_HI[acc], t2);
+ tcg_temp_free_i64(t2);
+ }
+ break;
+ case NM_EXTRV_RS_W:
+ tcg_gen_movi_tl(t0, v2 >> 3);
+ gen_helper_extr_rs_w(cpu_gpr[ret], t0, v1_t, cpu_env);
+ break;
+ }
+ break;
+ case NM_POOL32AXF_2_24_31:
+ switch ((ctx->opcode >> 9) & 0x07) {
+ case NM_DPAU_H_QBR:
+ case NM_DPAQX_SA_W_PH:
+ case NM_DPSU_H_QBR:
+ case NM_DPSQX_SA_W_PH:
+ case NM_MULSAQ_S_W_PH:
+ gen_pool32axf_2_multiply(ctx, opc, ret, v1, v2);
+ break;
+ case NM_EXTPDPV:
+ tcg_gen_movi_tl(t0, v2 >> 3);
+ gen_helper_extpdp(cpu_gpr[ret], t0, v1_t, cpu_env);
+ break;
+ case NM_MSUBU:
+ {
+ int acc = (ctx->opcode >> 14) & 3;
+
+ TCGv_i64 t2 = tcg_temp_new_i64();
+ TCGv_i64 t3 = tcg_temp_new_i64();
+
+ gen_load_gpr(t0, v1);
+ gen_load_gpr(t1, ret);
+
+ tcg_gen_ext32u_tl(t0, t0);
+ tcg_gen_ext32u_tl(t1, t1);
+ tcg_gen_extu_tl_i64(t2, t0);
+ tcg_gen_extu_tl_i64(t3, t1);
+ tcg_gen_mul_i64(t2, t2, t3);
+ tcg_gen_concat_tl_i64(t3, cpu_LO[acc], cpu_HI[acc]);
+ tcg_gen_sub_i64(t2, t3, t2);
+ tcg_temp_free_i64(t3);
+ gen_move_low32(cpu_LO[acc], t2);
+ gen_move_high32(cpu_HI[acc], t2);
+ tcg_temp_free_i64(t2);
}
- tcg_temp_free(t0);
-#endif
- } else {
- gen_slt(ctx, OPC_SLTU, rd, rs, rt);
+ break;
+ case NM_EXTRV_S_H:
+ tcg_gen_movi_tl(t0, v2 >> 3);
+ gen_helper_extr_s_h(cpu_gpr[ret], t0, v1_t, cpu_env);
+ break;
}
break;
- case NM_SOV:
- {
- TCGv t0 = tcg_temp_local_new();
- TCGv t1 = tcg_temp_new();
- TCGv t2 = tcg_temp_new();
- TCGLabel *l1 = gen_new_label();
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
- gen_load_gpr(t1, rs);
- gen_load_gpr(t2, rt);
- tcg_gen_add_tl(t0, t1, t2);
- tcg_gen_ext32s_tl(t0, t0);
- tcg_gen_xor_tl(t1, t1, t2);
- tcg_gen_xor_tl(t2, t0, t2);
- tcg_gen_andc_tl(t1, t2, t1);
+ tcg_temp_free(t0);
+ tcg_temp_free(t1);
- tcg_gen_movi_tl(t0, 0);
- tcg_gen_brcondi_tl(TCG_COND_GE, t1, 0, l1);
- /* operands of same sign, result different sign */
+ tcg_temp_free(v0_t);
+ tcg_temp_free(v1_t);
+}
- tcg_gen_movi_tl(t0, 1);
- gen_set_label(l1);
- gen_store_gpr(t0, rd);
+static void gen_pool32axf_4_nanomips_insn(DisasContext *ctx, uint32_t opc,
+ int ret, int v1, int v2)
+{
+ TCGv t0;
+ TCGv v0_t;
+ TCGv v1_t;
- tcg_temp_free(t0);
- tcg_temp_free(t1);
- tcg_temp_free(t2);
- }
+ t0 = tcg_temp_new();
+
+ v0_t = tcg_temp_new();
+ v1_t = tcg_temp_new();
+
+ gen_load_gpr(v0_t, ret);
+ gen_load_gpr(v1_t, v1);
+
+ switch (opc) {
+ case NM_ABSQ_S_QB:
+ check_dspr2(ctx);
+ gen_helper_absq_s_qb(cpu_gpr[ret], v0_t, cpu_env);
break;
- case NM_MUL:
- gen_r6_muldiv(ctx, R6_OPC_MUL, rd, rs, rt);
+ case NM_ABSQ_S_PH:
+ check_dsp(ctx);
+ gen_helper_absq_s_ph(cpu_gpr[ret], v1_t, cpu_env);
break;
- case NM_MUH:
- gen_r6_muldiv(ctx, R6_OPC_MUH, rd, rs, rt);
+ case NM_ABSQ_S_W:
+ check_dsp(ctx);
+ gen_helper_absq_s_w(cpu_gpr[ret], v1_t, cpu_env);
break;
- case NM_MULU:
- gen_r6_muldiv(ctx, R6_OPC_MULU, rd, rs, rt);
+ case NM_PRECEQ_W_PHL:
+ check_dsp(ctx);
+ tcg_gen_andi_tl(cpu_gpr[ret], v1_t, 0xFFFF0000);
+ tcg_gen_ext32s_tl(cpu_gpr[ret], cpu_gpr[ret]);
break;
- case NM_MUHU:
- gen_r6_muldiv(ctx, R6_OPC_MUHU, rd, rs, rt);
+ case NM_PRECEQ_W_PHR:
+ check_dsp(ctx);
+ tcg_gen_andi_tl(cpu_gpr[ret], v1_t, 0x0000FFFF);
+ tcg_gen_shli_tl(cpu_gpr[ret], cpu_gpr[ret], 16);
+ tcg_gen_ext32s_tl(cpu_gpr[ret], cpu_gpr[ret]);
break;
- case NM_DIV:
- gen_r6_muldiv(ctx, R6_OPC_DIV, rd, rs, rt);
+ case NM_PRECEQU_PH_QBL:
+ check_dsp(ctx);
+ gen_helper_precequ_ph_qbl(cpu_gpr[ret], v1_t);
break;
- case NM_MOD:
- gen_r6_muldiv(ctx, R6_OPC_MOD, rd, rs, rt);
+ case NM_PRECEQU_PH_QBR:
+ check_dsp(ctx);
+ gen_helper_precequ_ph_qbr(cpu_gpr[ret], v1_t);
break;
- case NM_DIVU:
- gen_r6_muldiv(ctx, R6_OPC_DIVU, rd, rs, rt);
+ case NM_PRECEQU_PH_QBLA:
+ check_dsp(ctx);
+ gen_helper_precequ_ph_qbla(cpu_gpr[ret], v1_t);
break;
- case NM_MODU:
- gen_r6_muldiv(ctx, R6_OPC_MODU, rd, rs, rt);
+ case NM_PRECEQU_PH_QBRA:
+ check_dsp(ctx);
+ gen_helper_precequ_ph_qbra(cpu_gpr[ret], v1_t);
break;
-#ifndef CONFIG_USER_ONLY
- case NM_MFC0:
- check_cp0_enabled(ctx);
- if (rt == 0) {
- /* Treat as NOP. */
- break;
- }
- gen_mfc0(ctx, cpu_gpr[rt], rs, (ctx->opcode >> 11) & 0x7);
+ case NM_PRECEU_PH_QBL:
+ check_dsp(ctx);
+ gen_helper_preceu_ph_qbl(cpu_gpr[ret], v1_t);
break;
- case NM_MTC0:
- check_cp0_enabled(ctx);
+ case NM_PRECEU_PH_QBR:
+ check_dsp(ctx);
+ gen_helper_preceu_ph_qbr(cpu_gpr[ret], v1_t);
+ break;
+ case NM_PRECEU_PH_QBLA:
+ check_dsp(ctx);
+ gen_helper_preceu_ph_qbla(cpu_gpr[ret], v1_t);
+ break;
+ case NM_PRECEU_PH_QBRA:
+ check_dsp(ctx);
+ gen_helper_preceu_ph_qbra(cpu_gpr[ret], v1_t);
+ break;
+ case NM_REPLV_PH:
+ check_dsp(ctx);
+ tcg_gen_ext16u_tl(cpu_gpr[ret], v1_t);
+ tcg_gen_shli_tl(t0, cpu_gpr[ret], 16);
+ tcg_gen_or_tl(cpu_gpr[ret], cpu_gpr[ret], t0);
+ tcg_gen_ext32s_tl(cpu_gpr[ret], cpu_gpr[ret]);
+ break;
+ case NM_REPLV_QB:
+ check_dsp(ctx);
{
- TCGv t0 = tcg_temp_new();
+ TCGv val_t;
- gen_load_gpr(t0, rt);
- gen_mtc0(ctx, t0, rs, (ctx->opcode >> 11) & 0x7);
- tcg_temp_free(t0);
+ val_t = tcg_temp_new();
+ gen_load_gpr(val_t, v1);
+
+ tcg_gen_ext8u_tl(cpu_gpr[ret], val_t);
+ tcg_gen_shli_tl(t0, cpu_gpr[ret], 8);
+ tcg_gen_or_tl(cpu_gpr[ret], cpu_gpr[ret], t0);
+ tcg_gen_shli_tl(t0, cpu_gpr[ret], 16);
+ tcg_gen_or_tl(cpu_gpr[ret], cpu_gpr[ret], t0);
+ tcg_gen_ext32s_tl(cpu_gpr[ret], cpu_gpr[ret]);
}
break;
- case NM_D_E_MT_VPE:
+ case NM_BITREV:
+ check_dsp(ctx);
+ gen_helper_bitrev(cpu_gpr[ret], v1_t);
+ break;
+ case NM_INSV:
+ check_dsp(ctx);
{
- uint8_t sc = (ctx->opcode >> 10) & 1;
- TCGv t0 = tcg_temp_new();
+ TCGv t0, t1;
- switch (sc) {
- case 0:
- if (rs == 1) {
- /* DMT */
- check_insn(ctx, ASE_MT);
- gen_helper_dmt(t0);
- gen_store_gpr(t0, rt);
- } else if (rs == 0) {
- /* DVPE */
- check_insn(ctx, ASE_MT);
- gen_helper_dvpe(t0, cpu_env);
- gen_store_gpr(t0, rt);
- } else {
- generate_exception_end(ctx, EXCP_RI);
- }
- break;
- case 1:
- if (rs == 1) {
- /* EMT */
- check_insn(ctx, ASE_MT);
- gen_helper_emt(t0);
- gen_store_gpr(t0, rt);
- } else if (rs == 0) {
- /* EVPE */
- check_insn(ctx, ASE_MT);
- gen_helper_evpe(t0, cpu_env);
- gen_store_gpr(t0, rt);
- } else {
- generate_exception_end(ctx, EXCP_RI);
- }
- break;
- }
+ t0 = tcg_temp_new();
+ t1 = tcg_temp_new();
- tcg_temp_free(t0);
- }
- break;
- case NM_FORK:
- check_insn(ctx, ASE_MT);
- {
- TCGv t0 = tcg_temp_new();
- TCGv t1 = tcg_temp_new();
+ gen_load_gpr(t0, ret);
+ gen_load_gpr(t1, v1);
+
+ gen_helper_insv(cpu_gpr[ret], cpu_env, t1, t0);
- gen_load_gpr(t0, rt);
- gen_load_gpr(t1, rs);
- gen_helper_fork(t0, t1);
tcg_temp_free(t0);
tcg_temp_free(t1);
}
break;
- case NM_MFTR:
- case NM_MFHTR:
- check_insn(ctx, ASE_MT);
- if (rd == 0) {
- /* Treat as NOP. */
- return;
- }
- gen_mftr(env, ctx, rs, rt, (ctx->opcode >> 10) & 1,
- (ctx->opcode >> 11) & 0x1f, (ctx->opcode >> 3) & 1);
+ case NM_RADDU_W_QB:
+ check_dsp(ctx);
+ gen_helper_raddu_w_qb(cpu_gpr[ret], v1_t);
break;
- case NM_MTTR:
- case NM_MTHTR:
- check_insn(ctx, ASE_MT);
- gen_mttr(env, ctx, rs, rt, (ctx->opcode >> 10) & 1,
- (ctx->opcode >> 11) & 0x1f, (ctx->opcode >> 3) & 1);
+ case NM_BITSWAP:
+ gen_bitswap(ctx, OPC_BITSWAP, ret, v1);
break;
- case NM_YIELD:
- check_insn(ctx, ASE_MT);
- {
- TCGv t0 = tcg_temp_new();
+ case NM_CLO:
+ gen_cl(ctx, OPC_CLO, ret, v1);
+ break;
+ case NM_CLZ:
+ gen_cl(ctx, OPC_CLZ, ret, v1);
+ break;
+ case NM_WSBH:
+ gen_bshfl(ctx, OPC_WSBH, ret, v1);
+ break;
+ default:
+ generate_exception_end(ctx, EXCP_RI);
+ break;
+ }
- gen_load_gpr(t0, rs);
- gen_helper_yield(t0, cpu_env, t0);
- gen_store_gpr(t0, rt);
- tcg_temp_free(t0);
+ tcg_temp_free(t0);
+
+ tcg_temp_free(v0_t);
+ tcg_temp_free(v1_t);
+}
+
+static void gen_pool32axf_7_nanomips_insn(DisasContext *ctx, uint32_t opc,
+ int ret, int v1, int v2)
+{
+ int16_t imm;
+
+ TCGv t0;
+ TCGv v1_t;
+
+ t0 = tcg_temp_new();
+ v1_t = tcg_temp_new();
+
+ gen_load_gpr(v1_t, v1);
+
+ switch (opc) {
+ case NM_SHRA_R_QB:
+ tcg_gen_movi_tl(t0, v2 >> 2);
+ switch ((ctx->opcode >> 12) & 0x01) {
+ case 0:
+ /* NM_SHRA_QB */
+ check_dspr2(ctx);
+ gen_helper_shra_qb(cpu_gpr[ret], t0, v1_t);
+ break;
+ case 1:
+ /* NM_SHRA_R_QB */
+ check_dspr2(ctx);
+ gen_helper_shra_r_qb(cpu_gpr[ret], t0, v1_t);
+ break;
+ }
+ break;
+ case NM_SHRL_PH:
+ check_dspr2(ctx);
+ tcg_gen_movi_tl(t0, v2 >> 1);
+ gen_helper_shrl_ph(cpu_gpr[ret], t0, v1_t);
+ break;
+ case NM_REPL_QB:
+ {
+ check_dsp(ctx);
+ target_long result;
+ imm = (ctx->opcode >> 13) & 0xFF;
+ result = (uint32_t)imm << 24 |
+ (uint32_t)imm << 16 |
+ (uint32_t)imm << 8 |
+ (uint32_t)imm;
+ result = (int32_t)result;
+ tcg_gen_movi_tl(cpu_gpr[ret], result);
}
break;
-#endif
default:
generate_exception_end(ctx, EXCP_RI);
break;
- }
+ }
+ tcg_temp_free(t0);
+ tcg_temp_free(v1_t);
}
+
static void gen_pool32axf_nanomips_insn(CPUMIPSState *env, DisasContext *ctx)
{
int rt = (ctx->opcode >> 21) & 0x1f;
int rs = (ctx->opcode >> 16) & 0x1f;
+ int rd = (ctx->opcode >> 11) & 0x1f;
switch ((ctx->opcode >> 6) & 0x07) {
+ case NM_POOL32AXF_1:
+ {
+ int32_t op1 = (ctx->opcode >> 9) & 0x07;
+ gen_pool32axf_1_nanomips_insn(ctx, op1, rt, rs, rd);
+ }
+ break;
+ case NM_POOL32AXF_2:
+ {
+ int32_t op1 = (ctx->opcode >> 12) & 0x03;
+ gen_pool32axf_2_nanomips_insn(ctx, op1, rt, rs, rd);
+ }
+ break;
case NM_POOL32AXF_4:
+ {
+ int32_t op1 = (ctx->opcode >> 9) & 0x7f;
+ gen_pool32axf_4_nanomips_insn(ctx, op1, rt, rs, rd);
+ }
+ break;
case NM_POOL32AXF_5:
switch ((ctx->opcode >> 9) & 0x7f) {
case NM_CLO:
@@ -16946,6 +18212,12 @@ static void gen_pool32axf_nanomips_insn(CPUMIPSState *env, DisasContext *ctx)
break;
}
break;
+ case NM_POOL32AXF_7:
+ {
+ int32_t op1 = (ctx->opcode >> 9) & 0x7;
+ gen_pool32axf_7_nanomips_insn(ctx, op1, rt, rs, rd);
+ }
+ break;
default:
generate_exception_end(ctx, EXCP_RI);
break;
@@ -17609,6 +18881,12 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
case NM_POOL32A0:
gen_pool32a0_nanomips_insn(env, ctx);
break;
+ case NM_POOL32A5:
+ {
+ int32_t op1 = (ctx->opcode >> 3) & 0x7F;
+ gen_pool32a5_nanomips_insn(ctx, op1, rd, rs, rt);
+ }
+ break;
case NM_POOL32A7:
{
switch ((ctx->opcode >> 3) & 0x07) {
@@ -18249,6 +19527,18 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
case NM_BC1NEZC:
gen_compute_branch1_r6(ctx, OPC_BC1NEZ, rt, s, 0);
break;
+ case NM_BPOSGE32C:
+ check_dsp(ctx);
+ {
+ int32_t imm = ctx->opcode;
+ imm >>= 1;
+ imm &= 0x1fff;
+ imm |= (ctx->opcode & 1) << 13;
+
+ gen_compute_branch(ctx, OPC_BPOSGE32, 4, -1, -2,
+ (int32_t)imm, 4);
+ }
+ break;
default:
generate_exception_end(ctx, EXCP_RI);
break;
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 22/40] target/mips: Add handling of branch delay slots for nanoMIPS
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (20 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 21/40] target/mips: Implement DSP " Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-21 18:03 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 23/40] target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair Stefan Markovic
` (17 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Matthew Fortune <matthew.fortune@mips.com>
ISA mode bit (LSB of address) is no longer required but is also
masked to allow for tools transition. The flag has_isa_mode has the
key role in the implementation.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/translate.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/target/mips/translate.c b/target/mips/translate.c
index d7454a6..7fb2ff9 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -1458,6 +1458,7 @@ typedef struct DisasContext {
bool mrp;
bool nan2008;
bool abs2008;
+ bool has_isa_mode;
} DisasContext;
#define DISAS_STOP DISAS_TARGET_0
@@ -4538,7 +4539,7 @@ static void gen_compute_branch (DisasContext *ctx, uint32_t opc,
if (blink > 0) {
int post_delay = insn_bytes + delayslot_size;
- int lowbit = !!(ctx->hflags & MIPS_HFLAG_M16);
+ int lowbit = ctx->has_isa_mode && !!(ctx->hflags & MIPS_HFLAG_M16);
tcg_gen_movi_tl(cpu_gpr[blink],
ctx->base.pc_next + post_delay + lowbit);
@@ -10991,7 +10992,8 @@ static void gen_branch(DisasContext *ctx, int insn_bytes)
break;
case MIPS_HFLAG_BR:
/* unconditional branch to register */
- if (ctx->insn_flags & (ASE_MIPS16 | ASE_MICROMIPS)) {
+ if (ctx->has_isa_mode &&
+ (ctx->insn_flags & (ASE_MIPS16 | ASE_MICROMIPS))) {
TCGv t0 = tcg_temp_new();
TCGv_i32 t1 = tcg_temp_new_i32();
@@ -11027,7 +11029,7 @@ static void gen_compute_compact_branch(DisasContext *ctx, uint32_t opc,
int bcond_compute = 0;
TCGv t0 = tcg_temp_new();
TCGv t1 = tcg_temp_new();
- int m16_lowbit = (ctx->hflags & MIPS_HFLAG_M16) != 0;
+ int m16_lowbit = ctx->has_isa_mode && ((ctx->hflags & MIPS_HFLAG_M16) != 0);
if (ctx->hflags & MIPS_HFLAG_BMASK) {
#ifdef MIPS_DEBUG_DISAS
@@ -24747,6 +24749,7 @@ static void mips_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
ctx->mrp = (env->CP0_Config5 >> CP0C5_MRP) & 1;
ctx->nan2008 = (env->active_fpu.fcr31 >> FCR31_NAN2008) & 1;
ctx->abs2008 = (env->active_fpu.fcr31 >> FCR31_ABS2008) & 1;
+ ctx->has_isa_mode = ((env->CP0_Config3 >> CP0C3_MMAR) & 0x7) != 3;
restore_cpu_state(env, ctx);
#ifdef CONFIG_USER_ONLY
ctx->mem_idx = MIPS_HFLAG_UM;
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 23/40] target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (21 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 22/40] target/mips: Add handling of branch delay slots " Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-21 18:15 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 24/40] target/mips: Add updating BadInstr and BadInstrP registers for nanoMIPS Stefan Markovic
` (16 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Implement nanoMIPS LLWP and SCWP instruction pair.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
linux-user/mips/cpu_loop.c | 25 ++++++++---
target/mips/cpu.h | 2 +
target/mips/helper.h | 2 +
target/mips/op_helper.c | 35 +++++++++++++++
target/mips/translate.c | 107 +++++++++++++++++++++++++++++++++++++++++++++
5 files changed, 166 insertions(+), 5 deletions(-)
diff --git a/linux-user/mips/cpu_loop.c b/linux-user/mips/cpu_loop.c
index 084ad6a..1d3dc9e 100644
--- a/linux-user/mips/cpu_loop.c
+++ b/linux-user/mips/cpu_loop.c
@@ -397,10 +397,13 @@ static int do_store_exclusive(CPUMIPSState *env)
target_ulong addr;
target_ulong page_addr;
target_ulong val;
+ uint32_t val_wp = 0;
+ uint32_t llnewval_wp = 0;
int flags;
int segv = 0;
int reg;
int d;
+ int wp;
addr = env->lladdr;
page_addr = addr & TARGET_PAGE_MASK;
@@ -412,19 +415,31 @@ static int do_store_exclusive(CPUMIPSState *env)
} else {
reg = env->llreg & 0x1f;
d = (env->llreg & 0x20) != 0;
- if (d) {
- segv = get_user_s64(val, addr);
+ wp = (env->llreg & 0x40) != 0;
+ if (!wp) {
+ if (d) {
+ segv = get_user_s64(val, addr);
+ } else {
+ segv = get_user_s32(val, addr);
+ }
} else {
segv = get_user_s32(val, addr);
+ segv |= get_user_s32(val_wp, addr);
+ llnewval_wp = env->llnewval_wp;
}
if (!segv) {
- if (val != env->llval) {
+ if (val != env->llval && val_wp == llnewval_wp) {
env->active_tc.gpr[reg] = 0;
} else {
- if (d) {
- segv = put_user_u64(env->llnewval, addr);
+ if (!wp) {
+ if (d) {
+ segv = put_user_u64(env->llnewval, addr);
+ } else {
+ segv = put_user_u32(env->llnewval, addr);
+ }
} else {
segv = put_user_u32(env->llnewval, addr);
+ segv |= put_user_u32(env->llnewval_wp, addr + 4);
}
if (!segv) {
env->active_tc.gpr[reg] = 1;
diff --git a/target/mips/cpu.h b/target/mips/cpu.h
index 009202c..2d341d7 100644
--- a/target/mips/cpu.h
+++ b/target/mips/cpu.h
@@ -506,6 +506,8 @@ struct CPUMIPSState {
uint64_t lladdr;
target_ulong llval;
target_ulong llnewval;
+ uint32_t llval_wp;
+ uint32_t llnewval_wp;
target_ulong llreg;
uint64_t CP0_LLAddr_rw_bitmask;
int CP0_LLAddr_shift;
diff --git a/target/mips/helper.h b/target/mips/helper.h
index b2a780a..deca307 100644
--- a/target/mips/helper.h
+++ b/target/mips/helper.h
@@ -14,6 +14,8 @@ DEF_HELPER_4(swr, void, env, tl, tl, int)
#ifndef CONFIG_USER_ONLY
DEF_HELPER_3(ll, tl, env, tl, int)
DEF_HELPER_4(sc, tl, env, tl, tl, int)
+DEF_HELPER_5(llwp, void, env, tl, i32, i32, i32)
+DEF_HELPER_4(scwp, tl, env, tl, i64, int)
#ifdef TARGET_MIPS64
DEF_HELPER_3(lld, tl, env, tl, int)
DEF_HELPER_4(scd, tl, env, tl, tl, int)
diff --git a/target/mips/op_helper.c b/target/mips/op_helper.c
index b3eef9f..cb83b6d 100644
--- a/target/mips/op_helper.c
+++ b/target/mips/op_helper.c
@@ -380,6 +380,19 @@ HELPER_LD_ATOMIC(lld, ld, 0x7)
#endif
#undef HELPER_LD_ATOMIC
+void helper_llwp(CPUMIPSState *env, target_ulong addr, uint32_t reg1,
+ uint32_t reg2, uint32_t mem_idx)
+{
+ if (addr & 0x7) {
+ env->CP0_BadVAddr = addr;
+ do_raise_exception(env, EXCP_AdEL, GETPC());
+ }
+ env->lladdr = do_translate_address(env, addr, 0, GETPC());
+ env->active_tc.gpr[reg1] = env->llval = do_lw(env, addr, mem_idx, GETPC());
+ env->active_tc.gpr[reg2] = env->llval_wp = do_lw(env, addr + 4, mem_idx,
+ GETPC());
+}
+
#define HELPER_ST_ATOMIC(name, ld_insn, st_insn, almask) \
target_ulong helper_##name(CPUMIPSState *env, target_ulong arg1, \
target_ulong arg2, int mem_idx) \
@@ -406,6 +419,28 @@ HELPER_ST_ATOMIC(sc, lw, sw, 0x3)
HELPER_ST_ATOMIC(scd, ld, sd, 0x7)
#endif
#undef HELPER_ST_ATOMIC
+
+target_ulong helper_scwp(CPUMIPSState *env, target_ulong addr,
+ uint64_t data, int mem_idx)
+{
+ uint32_t tmp;
+ uint32_t tmp2;
+
+ if (addr & 0x7) {
+ env->CP0_BadVAddr = addr;
+ do_raise_exception(env, EXCP_AdES, GETPC());
+ }
+ if (do_translate_address(env, addr, 1, GETPC()) == env->lladdr) {
+ tmp = do_lw(env, addr, mem_idx, GETPC());
+ tmp2 = do_lw(env, addr + 4, mem_idx, GETPC());
+ if (tmp == env->llval && tmp2 == env->llval_wp) {
+ do_sw(env, addr, (uint32_t) data, mem_idx, GETPC());
+ do_sw(env, addr + 4, (uint32_t) *(&data + 4), mem_idx, GETPC());
+ return 1;
+ }
+ }
+ return 0;
+}
#endif
#ifdef TARGET_WORDS_BIGENDIAN
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 7fb2ff9..3f915e1 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -1459,6 +1459,7 @@ typedef struct DisasContext {
bool nan2008;
bool abs2008;
bool has_isa_mode;
+ bool xnp;
} DisasContext;
#define DISAS_STOP DISAS_TARGET_0
@@ -2336,6 +2337,44 @@ static void gen_ld(DisasContext *ctx, uint32_t opc,
tcg_temp_free(t0);
}
+static void gen_llwp(DisasContext *ctx, uint32_t base, int16_t offset,
+ uint32_t reg1, uint32_t reg2)
+{
+#ifdef CONFIG_USER_ONLY
+ TCGv taddr = tcg_temp_new();
+ TCGv tval = tcg_temp_new();
+
+ gen_base_offset_addr(ctx, taddr, base, offset);
+ tcg_gen_qemu_ld32s(tval, taddr, ctx->mem_idx);
+ tcg_gen_st_tl(taddr, cpu_env, offsetof(CPUMIPSState, lladdr));
+ tcg_gen_st_tl(tval, cpu_env, offsetof(CPUMIPSState, llval));
+ tcg_gen_ext32s_tl(tval, tval);
+ gen_store_gpr(tval, reg1);
+
+ gen_base_offset_addr(ctx, taddr, base, offset + 4);
+ tcg_gen_qemu_ld32s(tval, taddr, ctx->mem_idx);
+ tcg_gen_st_tl(tval, cpu_env, offsetof(CPUMIPSState, llval_wp));
+ tcg_gen_ext32s_tl(tval, tval);
+ gen_store_gpr(tval, reg2);
+
+ tcg_temp_free(taddr);
+ tcg_temp_free(tval);
+#else
+ TCGv taddr = tcg_temp_new();
+ TCGv_i32 helper_mem_idx = tcg_const_i32(ctx->mem_idx);
+ TCGv_i32 helper_reg1 = tcg_const_i32(reg1);
+ TCGv_i32 helper_reg2 = tcg_const_i32(reg2);
+
+ gen_base_offset_addr(ctx, taddr, base, offset);
+ gen_helper_llwp(cpu_env, taddr, helper_reg1, helper_reg2, helper_mem_idx);
+
+ tcg_temp_free(taddr);
+ tcg_temp_free_i32(helper_mem_idx);
+ tcg_temp_free_i32(helper_reg1);
+ tcg_temp_free_i32(helper_reg2);
+#endif
+}
+
/* Store */
static void gen_st (DisasContext *ctx, uint32_t opc, int rt,
int base, int offset)
@@ -2432,6 +2471,63 @@ static void gen_st_cond (DisasContext *ctx, uint32_t opc, int rt,
tcg_temp_free(t0);
}
+static void gen_scwp(DisasContext *ctx, uint32_t base, int16_t offset,
+ uint32_t reg1, uint32_t reg2)
+{
+#ifdef CONFIG_USER_ONLY
+ TCGv taddr = tcg_temp_local_new();
+ TCGv t0 = tcg_temp_new();
+ TCGLabel *l1 = gen_new_label();
+ TCGLabel *l2 = gen_new_label();
+
+ gen_base_offset_addr(ctx, taddr, base, offset);
+ tcg_gen_andi_tl(t0, taddr, 0x7);
+ tcg_gen_brcondi_tl(TCG_COND_EQ, t0, 0, l1);
+ tcg_gen_st_tl(taddr, cpu_env, offsetof(CPUMIPSState, CP0_BadVAddr));
+ generate_exception(ctx, EXCP_AdES);
+ gen_set_label(l1);
+ tcg_gen_ld_tl(t0, cpu_env, offsetof(CPUMIPSState, lladdr));
+ tcg_gen_brcond_tl(TCG_COND_NE, taddr, t0, l2);
+ tcg_gen_movi_tl(t0, reg1 | 0x60);
+ tcg_gen_st_tl(t0, cpu_env, offsetof(CPUMIPSState, llreg));
+ gen_load_gpr(t0, reg1);
+ tcg_gen_st_tl(t0, cpu_env, offsetof(CPUMIPSState, llnewval));
+ gen_load_gpr(t0, reg2);
+ tcg_gen_st_tl(t0, cpu_env, offsetof(CPUMIPSState, llnewval_wp));
+ generate_exception_end(ctx, EXCP_SC);
+ gen_set_label(l2);
+ tcg_gen_movi_tl(t0, 0);
+ gen_store_gpr(t0, reg1);
+ tcg_temp_free(t0);
+ tcg_temp_free(taddr);
+#else
+ TCGv taddr = tcg_temp_new();
+ TCGv_i64 tdata = tcg_temp_new_i64();
+ TCGv_i32 helper_mem_idx = tcg_const_i32(ctx->mem_idx);
+
+ TCGv t0 = tcg_temp_new();
+ TCGv_i64 t1_64 = tcg_temp_new_i64();
+
+ gen_load_gpr(t0, reg2);
+ tcg_gen_ext_tl_i64(tdata, t0);
+ tcg_gen_shli_i64(tdata, tdata, 32);
+
+ gen_load_gpr(t0, reg1);
+ tcg_gen_ext_tl_i64(t1_64, t0);
+ tcg_gen_or_i64(tdata, tdata, t1_64);
+
+ gen_base_offset_addr(ctx, taddr, base, offset);
+ gen_helper_scwp(cpu_gpr[reg1], cpu_env, taddr, tdata, helper_mem_idx);
+
+ tcg_temp_free(taddr);
+ tcg_temp_free_i64(tdata);
+ tcg_temp_free_i32(helper_mem_idx);
+
+ tcg_temp_free(t0);
+ tcg_temp_free_i64(t1_64);
+#endif
+}
+
/* Load and store */
static void gen_flt_ldst (DisasContext *ctx, uint32_t opc, int ft,
TCGv t0)
@@ -19399,6 +19495,11 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
gen_ld(ctx, OPC_LL, rt, rs, s);
break;
case NM_LLWP:
+ if (ctx->xnp) {
+ generate_exception_end(ctx, EXCP_RI);
+ } else {
+ gen_llwp(ctx, rs, 0, rt, extract32(ctx->opcode, 3, 5));
+ }
break;
}
break;
@@ -19408,6 +19509,11 @@ static int decode_nanomips_32_48_opc(CPUMIPSState *env, DisasContext *ctx)
gen_st_cond(ctx, OPC_SC, rt, rs, s);
break;
case NM_SCWP:
+ if (ctx->xnp) {
+ generate_exception_end(ctx, EXCP_RI);
+ } else {
+ gen_scwp(ctx, rs, 0, rt, extract32(ctx->opcode, 3, 5));
+ }
break;
}
break;
@@ -24750,6 +24856,7 @@ static void mips_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
ctx->nan2008 = (env->active_fpu.fcr31 >> FCR31_NAN2008) & 1;
ctx->abs2008 = (env->active_fpu.fcr31 >> FCR31_ABS2008) & 1;
ctx->has_isa_mode = ((env->CP0_Config3 >> CP0C3_MMAR) & 0x7) != 3;
+ ctx->xnp = (env->CP0_Config5 >> CP0C5_XNP) & 1;
restore_cpu_state(env, ctx);
#ifdef CONFIG_USER_ONLY
ctx->mem_idx = MIPS_HFLAG_UM;
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 24/40] target/mips: Add updating BadInstr and BadInstrP registers for nanoMIPS
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (22 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 23/40] target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-23 16:36 ` Richard Henderson
2018-07-24 10:47 ` Aleksandar Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 25/40] target/mips: Add updating CP0 BadInstrX register for nanoMIPs only Stefan Markovic
` (15 subsequent siblings)
39 siblings, 2 replies; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Updating BadInstr and BadInstrP registers was addded for nanoMIPS.
BadInstr and BadInstrP support for pre-nanoMIPS remains
unimplemented.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/helper.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/target/mips/helper.c b/target/mips/helper.c
index e215af9..5299f21 100644
--- a/target/mips/helper.c
+++ b/target/mips/helper.c
@@ -683,7 +683,28 @@ static void set_hflags_for_handler (CPUMIPSState *env)
static inline void set_badinstr_registers(CPUMIPSState *env)
{
if (env->hflags & MIPS_HFLAG_M16) {
- /* TODO: add BadInstr support for microMIPS */
+ uint32_t instr;
+ if (!(env->insn_flags & ISA_NANOMIPS32)) {
+ /* TODO: add BadInstr support for pre-nanoMIPS */
+ return;
+ }
+ if (env->CP0_Config3 & (1 << CP0C3_BI)) {
+ instr = (cpu_lduw_code(env, env->active_tc.PC)) << 16;
+ if ((env->insn_flags & ISA_NANOMIPS32) &&
+ ((instr & 0x10000000) == 0)) {
+ instr |= cpu_lduw_code(env, env->active_tc.PC + 2);
+ }
+ env->CP0_BadInstr = instr;
+ }
+ if ((env->CP0_Config3 & (1 << CP0C3_BP)) &&
+ (env->hflags & MIPS_HFLAG_BMASK)) {
+ if (!(env->hflags & MIPS_HFLAG_B16)) {
+ env->CP0_BadInstrP = cpu_ldl_code(env, env->active_tc.PC - 4);
+ } else {
+ env->CP0_BadInstrP =
+ (cpu_lduw_code(env, env->active_tc.PC - 2)) << 16;
+ }
+ }
return;
}
if (env->CP0_Config3 & (1 << CP0C3_BI)) {
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 25/40] target/mips: Add updating CP0 BadInstrX register for nanoMIPs only
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (23 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 24/40] target/mips: Add updating BadInstr and BadInstrP registers for nanoMIPS Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-23 16:35 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 26/40] target/mips: Implement CP0 Config0.WR bit functionality Stefan Markovic
` (14 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/helper.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/target/mips/helper.c b/target/mips/helper.c
index 5299f21..9535131 100644
--- a/target/mips/helper.c
+++ b/target/mips/helper.c
@@ -695,6 +695,12 @@ static inline void set_badinstr_registers(CPUMIPSState *env)
instr |= cpu_lduw_code(env, env->active_tc.PC + 2);
}
env->CP0_BadInstr = instr;
+
+ if ((env->insn_flags & ISA_NANOMIPS32) &&
+ ((instr & 0xFC000000) == 0x60000000)) {
+ instr = cpu_lduw_code(env, env->active_tc.PC + 4) << 16;
+ env->CP0_BadInstrX = instr;
+ }
}
if ((env->CP0_Config3 & (1 << CP0C3_BP)) &&
(env->hflags & MIPS_HFLAG_BMASK)) {
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 26/40] target/mips: Implement CP0 Config0.WR bit functionality
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (24 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 25/40] target/mips: Add updating CP0 BadInstrX register for nanoMIPs only Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-23 16:46 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 27/40] target/mips: Adjust behavior of Config3's ISAOnExc bit for nanoMIPS Stefan Markovic
` (13 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Stefan Markovic <smarkovic@wavecomp.com>
Add testing Config0.WR bit into watch exception handling logic.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/helper.c | 12 +++++++++++-
target/mips/translate.c | 22 ++++++++++++++++------
2 files changed, 27 insertions(+), 7 deletions(-)
diff --git a/target/mips/helper.c b/target/mips/helper.c
index 9535131..dc8f2a5 100644
--- a/target/mips/helper.c
+++ b/target/mips/helper.c
@@ -749,6 +749,14 @@ void mips_cpu_do_interrupt(CPUState *cs)
(env->hflags & MIPS_HFLAG_DM)) {
cs->exception_index = EXCP_DINT;
}
+
+ if ((cs->exception_index == EXCP_DWATCH ||
+ cs->exception_index == EXCP_DFWATCH ||
+ cs->exception_index == EXCP_IWATCH) &&
+ (env->CP0_Config1 & (1 << CP0C1_WR))) {
+ cs->exception_index = EXCP_NONE;
+ }
+
offset = 0x180;
switch (cs->exception_index) {
case EXCP_DSS:
@@ -799,7 +807,9 @@ void mips_cpu_do_interrupt(CPUState *cs)
break;
case EXCP_SRESET:
env->CP0_Status |= (1 << CP0St_SR);
- memset(env->CP0_WatchLo, 0, sizeof(env->CP0_WatchLo));
+ if (env->CP0_Config1 & (1 << CP0C1_WR)) {
+ memset(env->CP0_WatchLo, 0, sizeof(env->CP0_WatchLo));
+ }
goto set_error_EPC;
case EXCP_NMI:
env->CP0_Status |= (1 << CP0St_NMI);
diff --git a/target/mips/translate.c b/target/mips/translate.c
index 3f915e1..ec486bb 100644
--- a/target/mips/translate.c
+++ b/target/mips/translate.c
@@ -5622,6 +5622,7 @@ static void gen_mfc0(DisasContext *ctx, TCGv arg, int reg, int sel)
case 5:
case 6:
case 7:
+ CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
gen_helper_1e0i(mfc0_watchlo, arg, sel);
rn = "WatchLo";
break;
@@ -5639,6 +5640,7 @@ static void gen_mfc0(DisasContext *ctx, TCGv arg, int reg, int sel)
case 5:
case 6:
case 7:
+ CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
gen_helper_1e0i(mfc0_watchhi, arg, sel);
rn = "WatchHi";
break;
@@ -6321,6 +6323,7 @@ static void gen_mtc0(DisasContext *ctx, TCGv arg, int reg, int sel)
case 5:
case 6:
case 7:
+ CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
gen_helper_0e1i(mtc0_watchlo, arg, sel);
rn = "WatchLo";
break;
@@ -6338,6 +6341,7 @@ static void gen_mtc0(DisasContext *ctx, TCGv arg, int reg, int sel)
case 5:
case 6:
case 7:
+ CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
gen_helper_0e1i(mtc0_watchhi, arg, sel);
rn = "WatchHi";
break;
@@ -7024,6 +7028,7 @@ static void gen_dmfc0(DisasContext *ctx, TCGv arg, int reg, int sel)
case 5:
case 6:
case 7:
+ CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
gen_helper_1e0i(dmfc0_watchlo, arg, sel);
rn = "WatchLo";
break;
@@ -7041,6 +7046,7 @@ static void gen_dmfc0(DisasContext *ctx, TCGv arg, int reg, int sel)
case 5:
case 6:
case 7:
+ CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
gen_helper_1e0i(mfc0_watchhi, arg, sel);
rn = "WatchHi";
break;
@@ -7705,6 +7711,7 @@ static void gen_dmtc0(DisasContext *ctx, TCGv arg, int reg, int sel)
case 5:
case 6:
case 7:
+ CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
gen_helper_0e1i(mtc0_watchlo, arg, sel);
rn = "WatchLo";
break;
@@ -7722,6 +7729,7 @@ static void gen_dmtc0(DisasContext *ctx, TCGv arg, int reg, int sel)
case 5:
case 6:
case 7:
+ CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
gen_helper_0e1i(mtc0_watchhi, arg, sel);
rn = "WatchHi";
break;
@@ -25281,14 +25289,16 @@ void cpu_state_reset(CPUMIPSState *env)
no performance counters. */
env->CP0_IntCtl = 0xe0000000;
{
- int i;
+ if (env->CP0_Config1 & (1 << CP0C1_WR)) {
+ int i;
- for (i = 0; i < 7; i++) {
- env->CP0_WatchLo[i] = 0;
- env->CP0_WatchHi[i] = 0x80000000;
+ for (i = 0; i < 7; i++) {
+ env->CP0_WatchLo[i] = 0;
+ env->CP0_WatchHi[i] = 0x80000000;
+ }
+ env->CP0_WatchLo[7] = 0;
+ env->CP0_WatchHi[7] = 0;
}
- env->CP0_WatchLo[7] = 0;
- env->CP0_WatchHi[7] = 0;
}
/* Count register increments in debug mode, EJTAG version 1 */
env->CP0_Debug = (1 << CP0DB_CNT) | (0x1 << CP0DB_VER);
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 27/40] target/mips: Adjust behavior of Config3's ISAOnExc bit for nanoMIPS
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (25 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 26/40] target/mips: Implement CP0 Config0.WR bit functionality Stefan Markovic
@ 2018-07-19 12:54 ` Stefan Markovic
2018-07-23 16:48 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 28/40] target/mips: Adjust exception_resume_pc() " Stefan Markovic
` (12 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:54 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Config3.ISAOnExc is read only in nanoMIPS.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/op_helper.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/target/mips/op_helper.c b/target/mips/op_helper.c
index cb83b6d..5e10286 100644
--- a/target/mips/op_helper.c
+++ b/target/mips/op_helper.c
@@ -1730,7 +1730,8 @@ void helper_mtc0_config2(CPUMIPSState *env, target_ulong arg1)
void helper_mtc0_config3(CPUMIPSState *env, target_ulong arg1)
{
- if (env->insn_flags & ASE_MICROMIPS) {
+ if ((env->insn_flags & ASE_MICROMIPS) &&
+ !(env->insn_flags & ISA_NANOMIPS32)) {
env->CP0_Config3 = (env->CP0_Config3 & ~(1 << CP0C3_ISA_ON_EXC)) |
(arg1 & (1 << CP0C3_ISA_ON_EXC));
}
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 28/40] target/mips: Adjust exception_resume_pc() for nanoMIPS
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (26 preceding siblings ...)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 27/40] target/mips: Adjust behavior of Config3's ISAOnExc bit for nanoMIPS Stefan Markovic
@ 2018-07-19 12:55 ` Stefan Markovic
2018-07-23 16:54 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 29/40] target/mips: Adjust set_hflags_for_handler() " Stefan Markovic
` (11 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:55 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: James Hogan <james.hogan@mips.com>
We shouldn't set the ISA bit in CP0_EPC for nanoMIPS.
Signed-off-by: James Hogan <james.hogan@mips.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/helper.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/target/mips/helper.c b/target/mips/helper.c
index dc8f2a5..fb47018 100644
--- a/target/mips/helper.c
+++ b/target/mips/helper.c
@@ -656,7 +656,8 @@ target_ulong exception_resume_pc (CPUMIPSState *env)
target_ulong bad_pc;
target_ulong isa_mode;
- isa_mode = !!(env->hflags & MIPS_HFLAG_M16);
+ isa_mode = env->hflags & MIPS_HFLAG_M16 &&
+ !(env->insn_flags & ISA_NANOMIPS32);
bad_pc = env->active_tc.PC | isa_mode;
if (env->hflags & MIPS_HFLAG_BMASK) {
/* If the exception was raised from a delay slot, come back to
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 29/40] target/mips: Adjust set_hflags_for_handler() for nanoMIPS
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (27 preceding siblings ...)
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 28/40] target/mips: Adjust exception_resume_pc() " Stefan Markovic
@ 2018-07-19 12:55 ` Stefan Markovic
2018-07-23 16:54 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 30/40] target/mips: Adjust set_pc() " Stefan Markovic
` (10 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:55 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: James Hogan <james.hogan@mips.com>
We shouldn't clear M16 mode when entering an interrupt on nanoMIPS,
otherwise we'll start interpreting the code as normal MIPS code.
Signed-off-by: James Hogan <james.hogan@mips.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/helper.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/target/mips/helper.c b/target/mips/helper.c
index fb47018..e5fc981 100644
--- a/target/mips/helper.c
+++ b/target/mips/helper.c
@@ -671,6 +671,9 @@ target_ulong exception_resume_pc (CPUMIPSState *env)
#if !defined(CONFIG_USER_ONLY)
static void set_hflags_for_handler (CPUMIPSState *env)
{
+ if (env->insn_flags & ISA_NANOMIPS32) {
+ return;
+ }
/* Exception handlers are entered in 32-bit mode. */
env->hflags &= ~(MIPS_HFLAG_M16);
/* ...except that microMIPS lets you choose. */
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 30/40] target/mips: Adjust set_pc() for nanoMIPS
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (28 preceding siblings ...)
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 29/40] target/mips: Adjust set_hflags_for_handler() " Stefan Markovic
@ 2018-07-19 12:55 ` Stefan Markovic
2018-07-23 16:55 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 31/40] target/mips: Fix ERET/ERETNC behavior related to ADEL exception Stefan Markovic
` (9 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:55 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: James Hogan <james.hogan@mips.com>
ERET and ERETNC shouldn't clear MIPS_HFLAG_M16 for nanoMIPS since there
is no ISA bit, so fix set_pc() to skip the hflags update.
Signed-off-by: James Hogan <james.hogan@mips.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
---
target/mips/op_helper.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/target/mips/op_helper.c b/target/mips/op_helper.c
index 5e10286..c55a1e6 100644
--- a/target/mips/op_helper.c
+++ b/target/mips/op_helper.c
@@ -2428,6 +2428,10 @@ static void debug_post_eret(CPUMIPSState *env)
static void set_pc(CPUMIPSState *env, target_ulong error_pc)
{
env->active_tc.PC = error_pc & ~(target_ulong)1;
+ if (env->insn_flags & ISA_NANOMIPS32) {
+ /* Don't clear MIPS_HFLAG_M16 */
+ return;
+ }
if (error_pc & 1) {
env->hflags |= MIPS_HFLAG_M16;
} else {
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 31/40] target/mips: Fix ERET/ERETNC behavior related to ADEL exception
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (29 preceding siblings ...)
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 30/40] target/mips: Adjust set_pc() " Stefan Markovic
@ 2018-07-19 12:55 ` Stefan Markovic
2018-07-23 16:56 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 32/40] elf: Add nanoMIPS specific variations in ELF header fields Stefan Markovic
` (8 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:55 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Yongbok Kim <yongbok.kim@mips.com>
Fix ERET/ERETNC so that ADEL exception can be raised.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
---
target/mips/op_helper.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/target/mips/op_helper.c b/target/mips/op_helper.c
index c55a1e6..e6749c5 100644
--- a/target/mips/op_helper.c
+++ b/target/mips/op_helper.c
@@ -2430,6 +2430,13 @@ static void set_pc(CPUMIPSState *env, target_ulong error_pc)
env->active_tc.PC = error_pc & ~(target_ulong)1;
if (env->insn_flags & ISA_NANOMIPS32) {
/* Don't clear MIPS_HFLAG_M16 */
+ if (error_pc & 1) {
+ if (!(env->hflags & MIPS_HFLAG_DM)) {
+ env->CP0_BadVAddr = error_pc;
+ }
+ env->active_tc.PC = error_pc;
+ do_raise_exception(env, EXCP_AdEL, 0);
+ }
return;
}
if (error_pc & 1) {
@@ -2467,10 +2474,12 @@ void helper_eretnc(CPUMIPSState *env)
void helper_deret(CPUMIPSState *env)
{
debug_pre_eret(env);
- set_pc(env, env->CP0_DEPC);
env->hflags &= ~MIPS_HFLAG_DM;
compute_hflags(env);
+
+ set_pc(env, env->CP0_DEPC);
+
debug_post_eret(env);
}
#endif /* !CONFIG_USER_ONLY */
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 32/40] elf: Add nanoMIPS specific variations in ELF header fields
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (30 preceding siblings ...)
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 31/40] target/mips: Fix ERET/ERETNC behavior related to ADEL exception Stefan Markovic
@ 2018-07-19 12:55 ` Stefan Markovic
2018-07-23 16:59 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 33/40] elf: Relax MIPS' elf_check_arch() to accept EM_NANOMIPS too Stefan Markovic
` (7 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:55 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Aleksandar Markovic <amarkovic@wavecomp.com>
Add nanoMIPS-related values in ELF header fields as specified in
nanoMIPS' "ELF ABI Supplement".
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
include/elf.h | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/include/elf.h b/include/elf.h
index 2c4fe7a..fff5967 100644
--- a/include/elf.h
+++ b/include/elf.h
@@ -62,6 +62,24 @@ typedef int64_t Elf64_Sxword;
#define EF_MIPS_NAN2008 0x00000400
#define EF_MIPS_ARCH 0xf0000000
+/* nanoMIPS architecture bits, EF_NANOMIPS_ARCH */
+#define EF_NANOMIPS_ARCH_32R6 0x00000000 /* 32-bit nanoMIPS Release 6 ISA */
+#define EF_NANOMIPS_ARCH_64R6 0x10000000 /* 62-bit nanoMIPS Release 6 ISA */
+
+/* nanoMIPS ABI bits, EF_NANOMIPS_ABI */
+#define EF_NANOMIPS_ABI_P32 0x00001000 /* 32-bit nanoMIPS ABI */
+#define EF_NANOMIPS_ABI_P64 0x00002000 /* 64-bit nanoMIPS ABI */
+
+/* nanoMIPS processor specific flags, e_flags */
+#define EF_NANOMIPS_LINKRELAX 0x00000001 /* Link-time relaxation */
+#define EF_NANOMIPS_PIC 0x00000002 /* Position independant code */
+#define EF_NANOMIPS_32BITMODE 0x00000004 /* 32-bit object for 64-bit arch. */
+#define EF_NANOMIPS_PID 0x00000008 /* Position independant data */
+#define EF_NANOMIPS_PCREL 0x00000010 /* PC-relative mode */
+#define EF_NANOMIPS_ABI 0x0000f000 /* nanoMIPS ABI */
+#define EF_NANOMIPS_MACH 0x00ff0000 /* Machine variant */
+#define EF_NANOMIPS_ARCH 0xf0000000 /* nanoMIPS architecture */
+
/* MIPS machine variant */
#define EF_MIPS_MACH_NONE 0x00000000 /* A standard MIPS implementation */
#define EF_MIPS_MACH_3900 0x00810000 /* Toshiba R3900 */
@@ -143,6 +161,8 @@ typedef int64_t Elf64_Sxword;
#define EM_RISCV 243 /* RISC-V */
+#define EM_NANOMIPS 249 /* Wave Computing nanoMIPS */
+
/*
* This is an interim value that we will use until the committee comes
* up with a final number.
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 33/40] elf: Relax MIPS' elf_check_arch() to accept EM_NANOMIPS too
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (31 preceding siblings ...)
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 32/40] elf: Add nanoMIPS specific variations in ELF header fields Stefan Markovic
@ 2018-07-19 12:55 ` Stefan Markovic
2018-07-23 17:01 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 34/40] linux-user: Don't check FCR31_NAN2008 bit for nanoMIPS Stefan Markovic
` (6 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:55 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Aleksandar Markovic <amarkovic@wavecomp.com>
Starting from nanoMIPS introduction, machine variant can be
EM_MIPS or EM_NANOMIPS.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
linux-user/elfload.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/linux-user/elfload.c b/linux-user/elfload.c
index 942a1b6..1900556 100644
--- a/linux-user/elfload.c
+++ b/linux-user/elfload.c
@@ -853,6 +853,8 @@ static void elf_core_copy_regs(target_elf_gregset_t *regs, const CPUPPCState *en
#endif
#define ELF_ARCH EM_MIPS
+#define elf_check_arch(x) ((x) == EM_MIPS || (x) == EM_NANOMIPS)
+
static inline void init_thread(struct target_pt_regs *regs,
struct image_info *infop)
{
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 34/40] linux-user: Don't check FCR31_NAN2008 bit for nanoMIPS
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (32 preceding siblings ...)
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 33/40] elf: Relax MIPS' elf_check_arch() to accept EM_NANOMIPS too Stefan Markovic
@ 2018-07-19 12:55 ` Stefan Markovic
2018-07-23 17:02 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 35/40] mips_malta: Add basic nanoMIPS boot code for MIPS' Malta Stefan Markovic
` (5 subsequent siblings)
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:55 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
linux-user/mips/cpu_loop.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/linux-user/mips/cpu_loop.c b/linux-user/mips/cpu_loop.c
index 1d3dc9e..c9c20cf 100644
--- a/linux-user/mips/cpu_loop.c
+++ b/linux-user/mips/cpu_loop.c
@@ -747,6 +747,9 @@ void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs)
if (regs->cp0_epc & 1) {
env->hflags |= MIPS_HFLAG_M16;
}
+ if (env->insn_flags & ISA_NANOMIPS32) {
+ return;
+ }
if (((info->elf_flags & EF_MIPS_NAN2008) != 0) !=
((env->active_fpu.fcr31 & (1 << FCR31_NAN2008)) != 0)) {
if ((env->active_fpu.fcr31_rw_bitmask &
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 35/40] mips_malta: Add basic nanoMIPS boot code for MIPS' Malta
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (33 preceding siblings ...)
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 34/40] linux-user: Don't check FCR31_NAN2008 bit for nanoMIPS Stefan Markovic
@ 2018-07-19 12:55 ` Stefan Markovic
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 36/40] mips_malta: Setup GT64120 BARs in nanoMIPS bootloader Stefan Markovic
` (4 subsequent siblings)
39 siblings, 0 replies; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:55 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Matthew Fortune <matthew.fortune@mips.com>
Added very very basic nanoMIPS boot code but this is hacked in
unconditionally currently.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
hw/mips/mips_malta.c | 75 +++++++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 69 insertions(+), 6 deletions(-)
diff --git a/hw/mips/mips_malta.c b/hw/mips/mips_malta.c
index 3467451..4bc9036 100644
--- a/hw/mips/mips_malta.c
+++ b/hw/mips/mips_malta.c
@@ -620,6 +620,58 @@ static void network_init(PCIBus *pci_bus)
a2 - 32-bit address of the environment variables table
a3 - RAM size in bytes
*/
+static void write_bootloader_nanomips(uint8_t *base, int64_t run_addr,
+ int64_t kernel_entry)
+{
+ uint16_t *p;
+
+ /* Small bootloader */
+ p = (uint16_t *)base;
+
+#define NM_HI1(VAL) (((VAL) >> 16) & 0x1f)
+#define NM_HI2(VAL) \
+ (((VAL) & 0xf000) | (((VAL) >> 19) & 0xffc) | (((VAL) >> 31) & 0x1))
+#define NM_LO(VAL) ((VAL) & 0xfff)
+
+ stw_p(p++, 0x2800); stw_p(p++, 0x001c); /* bc to_here */
+ stw_p(p++, 0x8000); stw_p(p++, 0xc000); /* nop */
+ stw_p(p++, 0x8000); stw_p(p++, 0xc000); /* nop */
+ stw_p(p++, 0x8000); stw_p(p++, 0xc000); /* nop */
+ stw_p(p++, 0x8000); stw_p(p++, 0xc000); /* nop */
+ stw_p(p++, 0x8000); stw_p(p++, 0xc000); /* nop */
+ stw_p(p++, 0x8000); stw_p(p++, 0xc000); /* nop */
+ stw_p(p++, 0x8000); stw_p(p++, 0xc000); /* nop */
+
+ /* to_here: */
+ stw_p(p++, 0x0080); stw_p(p++, 0x0002); /* li a0,2 */
+ stw_p(p++, 0xe3a0 | NM_HI1(ENVP_ADDR - 64));
+ stw_p(p++, NM_HI2(ENVP_ADDR - 64));
+ /* lui sp,%hi(ENVP_ADDR - 64) */
+ stw_p(p++, 0x83bd); stw_p(p++, NM_LO(ENVP_ADDR - 64));
+ /* ori sp,sp,%lo(ENVP_ADDR - 64) */
+ stw_p(p++, 0xe0a0 | NM_HI1(ENVP_ADDR));
+ stw_p(p++, NM_HI2(ENVP_ADDR));
+ /* lui a1,%hi(ENVP_ADDR) */
+ stw_p(p++, 0x80a5); stw_p(p++, NM_LO(ENVP_ADDR));
+ /* ori a1,a1,%lo(ENVP_ADDR) */
+ stw_p(p++, 0xe0c0 | NM_HI1(ENVP_ADDR + 8));
+ stw_p(p++, NM_HI2(ENVP_ADDR + 8));
+ /* lui a2,%hi(ENVP_ADDR + 8) */
+ stw_p(p++, 0x80c6); stw_p(p++, NM_LO(ENVP_ADDR + 8));
+ /* ori a2,a2,%lo(ENVP_ADDR + 8) */
+ stw_p(p++, 0xe0e0 | NM_HI1(loaderparams.ram_low_size));
+ stw_p(p++, NM_HI2(loaderparams.ram_low_size));
+ /* lui a3,%hi(loaderparams.ram_low_size) */
+ stw_p(p++, 0x80e7); stw_p(p++, NM_LO(loaderparams.ram_low_size));
+ /* ori a3,a3,%lo(loaderparams.ram_low_size) */
+ stw_p(p++, 0xe320 | NM_HI1(kernel_entry));
+ stw_p(p++, NM_HI2(kernel_entry));
+ /* lui t9,%hi(kernel_entry) */
+ stw_p(p++, 0x8339); stw_p(p++, NM_LO(kernel_entry));
+ /* ori t9,t9,%lo(kernel_entry) */
+ stw_p(p++, 0x4bf9); stw_p(p++, 0x0000);
+ /* jalrc t8 */
+}
static void write_bootloader(uint8_t *base, int64_t run_addr,
int64_t kernel_entry)
@@ -813,10 +865,16 @@ static int64_t load_kernel (void)
NULL, (uint64_t *)&kernel_entry, NULL,
(uint64_t *)&kernel_high, big_endian, EM_MIPS, 1, 0);
if (kernel_size < 0) {
- error_report("could not load kernel '%s': %s",
- loaderparams.kernel_filename,
- load_elf_strerror(kernel_size));
- exit(1);
+ kernel_size = load_elf(loaderparams.kernel_filename,
+ cpu_mips_kseg0_to_phys, NULL,
+ (uint64_t *)&kernel_entry, NULL,
+ (uint64_t *)&kernel_high, big_endian, EM_NANOMIPS, 1, 0);
+ if (kernel_size < 0) {
+ error_report("could not load kernel '%s': %s",
+ loaderparams.kernel_filename,
+ load_elf_strerror(kernel_size));
+ exit(1);
+ }
}
/* Check where the kernel has been linked */
@@ -1096,8 +1154,13 @@ void mips_malta_init(MachineState *machine)
loaderparams.initrd_filename = initrd_filename;
kernel_entry = load_kernel();
- write_bootloader(memory_region_get_ram_ptr(bios),
- bootloader_run_addr, kernel_entry);
+ if (!cpu_supports_isa(machine->cpu_type, ISA_NANOMIPS32)) {
+ write_bootloader(memory_region_get_ram_ptr(bios),
+ bootloader_run_addr, kernel_entry);
+ } else {
+ write_bootloader_nanomips(memory_region_get_ram_ptr(bios),
+ bootloader_run_addr, kernel_entry);
+ }
if (kvm_enabled()) {
/* Write the bootloader code @ the end of RAM, 1MB reserved */
write_bootloader(memory_region_get_ram_ptr(ram_low_preio) +
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 36/40] mips_malta: Setup GT64120 BARs in nanoMIPS bootloader
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (34 preceding siblings ...)
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 35/40] mips_malta: Add basic nanoMIPS boot code for MIPS' Malta Stefan Markovic
@ 2018-07-19 12:55 ` Stefan Markovic
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 37/40] mips_malta: Fix semihosting argument passing for nanoMIPS bare metal Stefan Markovic
` (3 subsequent siblings)
39 siblings, 0 replies; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:55 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Paul Burton <pburton@wavecomp.com>
Setup the GT64120 BARs in the nanoMIPS bootloader, in the same way that
they are setup in the MIPS32 bootloader. This is necessary for Linux to
be able to access peripherals, including the UART.
Signed-off-by: Paul Burton <pburton@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
---
hw/mips/mips_malta.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/hw/mips/mips_malta.c b/hw/mips/mips_malta.c
index 4bc9036..d1a7c1f 100644
--- a/hw/mips/mips_malta.c
+++ b/hw/mips/mips_malta.c
@@ -664,6 +664,79 @@ static void write_bootloader_nanomips(uint8_t *base, int64_t run_addr,
/* lui a3,%hi(loaderparams.ram_low_size) */
stw_p(p++, 0x80e7); stw_p(p++, NM_LO(loaderparams.ram_low_size));
/* ori a3,a3,%lo(loaderparams.ram_low_size) */
+
+ /* Load BAR registers as done by YAMON */
+ stw_p(p++, 0xe040); stw_p(p++, 0x0681);
+ /* lui t1, %hi(0xb4000000) */
+#ifdef TARGET_WORDS_BIGENDIAN
+ stw_p(p++, 0xe020); stw_p(p++, 0x0be1);
+ /* lui t0, %hi(0xdf000000) */
+#else
+ stw_p(p++, 0x0020); stw_p(p++, 0x00df);
+ /* addiu[32] t0, $0, 0xdf */
+#endif
+ stw_p(p++, 0x8422); stw_p(p++, 0x9068);
+ /* sw t0, 0x68(t1) */
+
+ stw_p(p++, 0xe040); stw_p(p++, 0x077d);
+ /* lui t1, %hi(0xbbe00000) */
+#ifdef TARGET_WORDS_BIGENDIAN
+ stw_p(p++, 0xe020); stw_p(p++, 0x0801);
+ /* lui t0, %hi(0xc0000000) */
+#else
+ stw_p(p++, 0x0020); stw_p(p++, 0x00c0);
+ /* addiu[32] t0, $0, 0xc0 */
+#endif
+ stw_p(p++, 0x8422); stw_p(p++, 0x9048);
+ /* sw t0, 0x48(t1) */
+#ifdef TARGET_WORDS_BIGENDIAN
+ stw_p(p++, 0xe020); stw_p(p++, 0x0800);
+ /* lui t0, %hi(0x40000000) */
+#else
+ stw_p(p++, 0x0020); stw_p(p++, 0x0040);
+ /* addiu[32] t0, $0, 0x40 */
+#endif
+ stw_p(p++, 0x8422); stw_p(p++, 0x9050);
+ /* sw t0, 0x50(t1) */
+
+#ifdef TARGET_WORDS_BIGENDIAN
+ stw_p(p++, 0xe020); stw_p(p++, 0x0001);
+ /* lui t0, %hi(0x80000000) */
+#else
+ stw_p(p++, 0x0020); stw_p(p++, 0x0080);
+ /* addiu[32] t0, $0, 0x80 */
+#endif
+ stw_p(p++, 0x8422); stw_p(p++, 0x9058);
+ /* sw t0, 0x58(t1) */
+#ifdef TARGET_WORDS_BIGENDIAN
+ stw_p(p++, 0xe020); stw_p(p++, 0x07e0);
+ /* lui t0, %hi(0x3f000000) */
+#else
+ stw_p(p++, 0x0020); stw_p(p++, 0x003f);
+ /* addiu[32] t0, $0, 0x3f */
+#endif
+ stw_p(p++, 0x8422); stw_p(p++, 0x9060);
+ /* sw t0, 0x60(t1) */
+
+#ifdef TARGET_WORDS_BIGENDIAN
+ stw_p(p++, 0xe020); stw_p(p++, 0x0821);
+ /* lui t0, %hi(0xc1000000) */
+#else
+ stw_p(p++, 0x0020); stw_p(p++, 0x00c1);
+ /* addiu[32] t0, $0, 0xc1 */
+#endif
+ stw_p(p++, 0x8422); stw_p(p++, 0x9080);
+ /* sw t0, 0x80(t1) */
+#ifdef TARGET_WORDS_BIGENDIAN
+ stw_p(p++, 0xe020); stw_p(p++, 0x0bc0);
+ /* lui t0, %hi(0x5e000000) */
+#else
+ stw_p(p++, 0x0020); stw_p(p++, 0x005e);
+ /* addiu[32] t0, $0, 0x5e */
+#endif
+ stw_p(p++, 0x8422); stw_p(p++, 0x9088);
+ /* sw t0, 0x88(t1) */
+
stw_p(p++, 0xe320 | NM_HI1(kernel_entry));
stw_p(p++, NM_HI2(kernel_entry));
/* lui t9,%hi(kernel_entry) */
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 37/40] mips_malta: Fix semihosting argument passing for nanoMIPS bare metal
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (35 preceding siblings ...)
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 36/40] mips_malta: Setup GT64120 BARs in nanoMIPS bootloader Stefan Markovic
@ 2018-07-19 12:55 ` Stefan Markovic
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 38/40] gdbstub: Disable handling of nanoMIPS ISA bit in the MIPS gdbstub Stefan Markovic
` (2 subsequent siblings)
39 siblings, 0 replies; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:55 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Stefan Markovic <smarkovic@wavecomp.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
hw/mips/mips_malta.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/hw/mips/mips_malta.c b/hw/mips/mips_malta.c
index d1a7c1f..8bb1686 100644
--- a/hw/mips/mips_malta.c
+++ b/hw/mips/mips_malta.c
@@ -643,7 +643,12 @@ static void write_bootloader_nanomips(uint8_t *base, int64_t run_addr,
stw_p(p++, 0x8000); stw_p(p++, 0xc000); /* nop */
/* to_here: */
- stw_p(p++, 0x0080); stw_p(p++, 0x0002); /* li a0,2 */
+ if (semihosting_get_argc()) {
+ /* Preserve a0 content as arguments have been passed */
+ stw_p(p++, 0x8000); stw_p(p++, 0xc000); /* nop */
+ } else {
+ stw_p(p++, 0x0080); stw_p(p++, 0x0002); /* li a0,2 */
+ }
stw_p(p++, 0xe3a0 | NM_HI1(ENVP_ADDR - 64));
stw_p(p++, NM_HI2(ENVP_ADDR - 64));
/* lui sp,%hi(ENVP_ADDR - 64) */
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 38/40] gdbstub: Disable handling of nanoMIPS ISA bit in the MIPS gdbstub
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (36 preceding siblings ...)
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 37/40] mips_malta: Fix semihosting argument passing for nanoMIPS bare metal Stefan Markovic
@ 2018-07-19 12:55 ` Stefan Markovic
2018-07-23 17:03 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 39/40] gdbstub: Add XML support for GDB for nanoMIPS Stefan Markovic
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 40/40] target/mips: Add definition of nanoMIPS I7200 CPU Stefan Markovic
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:55 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: James Hogan <james.hogan@mips.com>
nanoMIPS has no ISA bit in the PC, so remove the handling of the low bit
of the PC in the MIPS gdbstub for nanoMIPS. This prevents the PC being
read as e.g. 0xbfc00001, and prevents writing to the PC clearing
MIPS_HFLAG_M16.
Signed-off-by: James Hogan <james.hogan@mips.com>
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/gdbstub.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/target/mips/gdbstub.c b/target/mips/gdbstub.c
index 18e0e6d..559b69f 100644
--- a/target/mips/gdbstub.c
+++ b/target/mips/gdbstub.c
@@ -60,7 +60,8 @@ int mips_cpu_gdb_read_register(CPUState *cs, uint8_t *mem_buf, int n)
return gdb_get_regl(mem_buf, (int32_t)env->CP0_Cause);
case 37:
return gdb_get_regl(mem_buf, env->active_tc.PC |
- !!(env->hflags & MIPS_HFLAG_M16));
+ (!(env->insn_flags & ISA_NANOMIPS32) &&
+ env->hflags & MIPS_HFLAG_M16));
case 72:
return gdb_get_regl(mem_buf, 0); /* fp */
case 89:
@@ -131,10 +132,12 @@ int mips_cpu_gdb_write_register(CPUState *cs, uint8_t *mem_buf, int n)
break;
case 37:
env->active_tc.PC = tmp & ~(target_ulong)1;
- if (tmp & 1) {
- env->hflags |= MIPS_HFLAG_M16;
- } else {
- env->hflags &= ~(MIPS_HFLAG_M16);
+ if (!(env->insn_flags & ISA_NANOMIPS32)) {
+ if (tmp & 1) {
+ env->hflags |= MIPS_HFLAG_M16;
+ } else {
+ env->hflags &= ~(MIPS_HFLAG_M16);
+ }
}
break;
case 72: /* fp, ignored */
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 39/40] gdbstub: Add XML support for GDB for nanoMIPS
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (37 preceding siblings ...)
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 38/40] gdbstub: Disable handling of nanoMIPS ISA bit in the MIPS gdbstub Stefan Markovic
@ 2018-07-19 12:55 ` Stefan Markovic
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 40/40] target/mips: Add definition of nanoMIPS I7200 CPU Stefan Markovic
39 siblings, 0 replies; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:55 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Stefan Markovic <smarkovic@wavecomp.com>
Add XML support files for GDB for nanoMIPS.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
MAINTAINERS | 3 ++-
gdb-xml/nanomips-cp0.xml | 13 +++++++++++++
gdb-xml/nanomips-cpu.xml | 44 ++++++++++++++++++++++++++++++++++++++++++++
gdb-xml/nanomips-dsp.xml | 20 ++++++++++++++++++++
gdb-xml/nanomips-fpu.xml | 45 +++++++++++++++++++++++++++++++++++++++++++++
gdb-xml/nanomips-linux.xml | 20 ++++++++++++++++++++
6 files changed, 144 insertions(+), 1 deletion(-)
create mode 100644 gdb-xml/nanomips-cp0.xml
create mode 100644 gdb-xml/nanomips-cpu.xml
create mode 100644 gdb-xml/nanomips-dsp.xml
create mode 100644 gdb-xml/nanomips-fpu.xml
create mode 100644 gdb-xml/nanomips-linux.xml
diff --git a/MAINTAINERS b/MAINTAINERS
index 7130807..a4907d0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -190,6 +190,8 @@ M: Aurelien Jarno <aurelien@aurel32.net>
M: Aleksandar Markovic <amarkovic@wavecomp.com>
S: Maintained
F: target/mips/
+F: disas/mips.c
+F: gdb-xml/*ips*.xml
F: hw/mips/
F: hw/misc/mips_*
F: hw/intc/mips_gic.c
@@ -199,7 +201,6 @@ F: include/hw/misc/mips_*
F: include/hw/intc/mips_gic.h
F: include/hw/timer/mips_gictimer.h
F: tests/tcg/mips/
-F: disas/mips.c
Moxie
M: Anthony Green <green@moxielogic.com>
diff --git a/gdb-xml/nanomips-cp0.xml b/gdb-xml/nanomips-cp0.xml
new file mode 100644
index 0000000..8095dc6
--- /dev/null
+++ b/gdb-xml/nanomips-cp0.xml
@@ -0,0 +1,13 @@
+<?xml version="1.0"?>
+<!-- Copyright (C) 2007-2015 Free Software Foundation, Inc.
+
+ Copying and distribution of this file, with or without modification,
+ are permitted in any medium without royalty provided the copyright
+ notice and this notice are preserved. -->
+
+<!DOCTYPE feature SYSTEM "gdb-target.dtd">
+<feature name="org.gnu.gdb.nanomips.cp0">
+ <reg name="status" bitsize="32"/>
+ <reg name="badvaddr" bitsize="32"/>
+ <reg name="cause" bitsize="32"/>
+</feature>
diff --git a/gdb-xml/nanomips-cpu.xml b/gdb-xml/nanomips-cpu.xml
new file mode 100644
index 0000000..6bba224
--- /dev/null
+++ b/gdb-xml/nanomips-cpu.xml
@@ -0,0 +1,44 @@
+<?xml version="1.0"?>
+<!-- Copyright (C) 2007-2015 Free Software Foundation, Inc.
+
+ Copying and distribution of this file, with or without modification,
+ are permitted in any medium without royalty provided the copyright
+ notice and this notice are preserved. -->
+
+<!DOCTYPE feature SYSTEM "gdb-target.dtd">
+<feature name="org.gnu.gdb.nanomips.cpu">
+ <reg name="r0" bitsize="32" regnum="0"/>
+ <reg name="r1" bitsize="32"/>
+ <reg name="r2" bitsize="32"/>
+ <reg name="r3" bitsize="32"/>
+ <reg name="r4" bitsize="32"/>
+ <reg name="r5" bitsize="32"/>
+ <reg name="r6" bitsize="32"/>
+ <reg name="r7" bitsize="32"/>
+ <reg name="r8" bitsize="32"/>
+ <reg name="r9" bitsize="32"/>
+ <reg name="r10" bitsize="32"/>
+ <reg name="r11" bitsize="32"/>
+ <reg name="r12" bitsize="32"/>
+ <reg name="r13" bitsize="32"/>
+ <reg name="r14" bitsize="32"/>
+ <reg name="r15" bitsize="32"/>
+ <reg name="r16" bitsize="32"/>
+ <reg name="r17" bitsize="32"/>
+ <reg name="r18" bitsize="32"/>
+ <reg name="r19" bitsize="32"/>
+ <reg name="r20" bitsize="32"/>
+ <reg name="r21" bitsize="32"/>
+ <reg name="r22" bitsize="32"/>
+ <reg name="r23" bitsize="32"/>
+ <reg name="r24" bitsize="32"/>
+ <reg name="r25" bitsize="32"/>
+ <reg name="r26" bitsize="32"/>
+ <reg name="r27" bitsize="32"/>
+ <reg name="r28" bitsize="32"/>
+ <reg name="r29" bitsize="32"/>
+ <reg name="r30" bitsize="32"/>
+ <reg name="r31" bitsize="32"/>
+
+ <reg name="pc" bitsize="32"/>
+</feature>
diff --git a/gdb-xml/nanomips-dsp.xml b/gdb-xml/nanomips-dsp.xml
new file mode 100644
index 0000000..950910f
--- /dev/null
+++ b/gdb-xml/nanomips-dsp.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0"?>
+<!-- Copyright (C) 2012-2015 Free Software Foundation, Inc.
+
+ Copying and distribution of this file, with or without modification,
+ are permitted in any medium without royalty provided the copyright
+ notice and this notice are preserved. -->
+
+<!DOCTYPE feature SYSTEM "gdb-target.dtd">
+<feature name="org.gnu.gdb.nanomips.dsp">
+ <reg name="hi0" bitsize="32"/>
+ <reg name="lo0" bitsize="32"/>
+ <reg name="hi1" bitsize="32"/>
+ <reg name="lo1" bitsize="32"/>
+ <reg name="hi2" bitsize="32"/>
+ <reg name="lo2" bitsize="32"/>
+ <reg name="hi3" bitsize="32"/>
+ <reg name="lo3" bitsize="32"/>
+
+ <reg name="dspctl" bitsize="32"/>
+</feature>
diff --git a/gdb-xml/nanomips-fpu.xml b/gdb-xml/nanomips-fpu.xml
new file mode 100644
index 0000000..fd225a5
--- /dev/null
+++ b/gdb-xml/nanomips-fpu.xml
@@ -0,0 +1,45 @@
+<?xml version="1.0"?>
+<!-- Copyright (C) 2007-2015 Free Software Foundation, Inc.
+
+ Copying and distribution of this file, with or without modification,
+ are permitted in any medium without royalty provided the copyright
+ notice and this notice are preserved. -->
+
+<!DOCTYPE feature SYSTEM "gdb-target.dtd">
+<feature name="org.gnu.gdb.nanomips.fpu">
+ <reg name="f0" bitsize="64" type="ieee_double"/>
+ <reg name="f1" bitsize="64" type="ieee_double"/>
+ <reg name="f2" bitsize="64" type="ieee_double"/>
+ <reg name="f3" bitsize="64" type="ieee_double"/>
+ <reg name="f4" bitsize="64" type="ieee_double"/>
+ <reg name="f5" bitsize="64" type="ieee_double"/>
+ <reg name="f6" bitsize="64" type="ieee_double"/>
+ <reg name="f7" bitsize="64" type="ieee_double"/>
+ <reg name="f8" bitsize="64" type="ieee_double"/>
+ <reg name="f9" bitsize="64" type="ieee_double"/>
+ <reg name="f10" bitsize="64" type="ieee_double"/>
+ <reg name="f11" bitsize="64" type="ieee_double"/>
+ <reg name="f12" bitsize="64" type="ieee_double"/>
+ <reg name="f13" bitsize="64" type="ieee_double"/>
+ <reg name="f14" bitsize="64" type="ieee_double"/>
+ <reg name="f15" bitsize="64" type="ieee_double"/>
+ <reg name="f16" bitsize="64" type="ieee_double"/>
+ <reg name="f17" bitsize="64" type="ieee_double"/>
+ <reg name="f18" bitsize="64" type="ieee_double"/>
+ <reg name="f19" bitsize="64" type="ieee_double"/>
+ <reg name="f20" bitsize="64" type="ieee_double"/>
+ <reg name="f21" bitsize="64" type="ieee_double"/>
+ <reg name="f22" bitsize="64" type="ieee_double"/>
+ <reg name="f23" bitsize="64" type="ieee_double"/>
+ <reg name="f24" bitsize="64" type="ieee_double"/>
+ <reg name="f25" bitsize="64" type="ieee_double"/>
+ <reg name="f26" bitsize="64" type="ieee_double"/>
+ <reg name="f27" bitsize="64" type="ieee_double"/>
+ <reg name="f28" bitsize="64" type="ieee_double"/>
+ <reg name="f29" bitsize="64" type="ieee_double"/>
+ <reg name="f30" bitsize="64" type="ieee_double"/>
+ <reg name="f31" bitsize="64" type="ieee_double"/>
+
+ <reg name="fcsr" bitsize="32" group="float"/>
+ <reg name="fir" bitsize="32" group="float"/>
+</feature>
diff --git a/gdb-xml/nanomips-linux.xml b/gdb-xml/nanomips-linux.xml
new file mode 100644
index 0000000..8a04634
--- /dev/null
+++ b/gdb-xml/nanomips-linux.xml
@@ -0,0 +1,20 @@
+<?xml version="1.0"?>
+<!-- Copyright (C) 2007-2015 Free Software Foundation, Inc.
+
+ Copying and distribution of this file, with or without modification,
+ are permitted in any medium without royalty provided the copyright
+ notice and this notice are preserved. -->
+
+<!DOCTYPE target SYSTEM "gdb-target.dtd">
+<target>
+ <architecture>nanomips</architecture>
+ <osabi>GNU/Linux</osabi>
+ <xi:include href="nanomips-cpu.xml"/>
+ <xi:include href="nanomips-cp0.xml"/>
+ <xi:include href="nanomips-fpu.xml"/>
+ <xi:include href="nanomips-dsp.xml"/>
+
+ <feature name="org.gnu.gdb.nanomips.linux">
+ <reg name="restart" bitsize="32" group="system"/>
+ </feature>
+</target>
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* [Qemu-devel] [PATCH v3 40/40] target/mips: Add definition of nanoMIPS I7200 CPU
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
` (38 preceding siblings ...)
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 39/40] gdbstub: Add XML support for GDB for nanoMIPS Stefan Markovic
@ 2018-07-19 12:55 ` Stefan Markovic
2018-07-23 17:05 ` Richard Henderson
39 siblings, 1 reply; 89+ messages in thread
From: Stefan Markovic @ 2018-07-19 12:55 UTC (permalink / raw)
To: qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, amarkovic, smarkovic, pjovanovic, pburton
From: Stefan Markovic <smarkovic@wavecomp.com>
Add definition of the first nanoMIPS processor in QEMU.
Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
---
target/mips/translate_init.inc.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/target/mips/translate_init.inc.c b/target/mips/translate_init.inc.c
index c7ba6ee..d3f32e8 100644
--- a/target/mips/translate_init.inc.c
+++ b/target/mips/translate_init.inc.c
@@ -449,6 +449,46 @@ const mips_def_t mips_defs[] =
.insn_flags = CPU_MIPS32R6 | ASE_MICROMIPS,
.mmu_type = MMU_TYPE_R4000,
},
+ {
+ .name = "I7200",
+ .CP0_PRid = 0x00010000,
+ .CP0_Config0 = MIPS_CONFIG0 | (1 << CP0C0_MM) | (0x2 << CP0C0_AR) |
+ (MMU_TYPE_R4000 << CP0C0_MT),
+ .CP0_Config1 = (1U << CP0C1_M) | (15 << CP0C1_MMU) | (2 << CP0C1_IS) |
+ (4 << CP0C1_IL) | (3 << CP0C1_IA) | (2 << CP0C1_DS) |
+ (4 << CP0C1_DL) | (3 << CP0C1_DA) | (1 << CP0C1_PC) |
+ (1 << CP0C1_EP),
+ .CP0_Config2 = MIPS_CONFIG2,
+ .CP0_Config3 = MIPS_CONFIG3 | (1U << CP0C3_M) | (1 << CP0C3_CMGCR) |
+ (1 << CP0C3_BI) | (1 << CP0C3_SC) | (3 << CP0C3_MMAR) |
+ (1 << CP0C3_ISA_ON_EXC) | (1 << CP0C3_ISA) |
+ (1 << CP0C3_ULRI) | (1 << CP0C3_RXI) |
+ (1 << CP0C3_DSP2P) | (1 << CP0C3_DSPP) |
+ (1 << CP0C3_CTXTC) | (1 << CP0C3_VInt) |
+ (1 << CP0C3_CDMM) | (1 << CP0C3_MT) | (1 << CP0C3_TL),
+ .CP0_Config4 = MIPS_CONFIG4 | (0xfc << CP0C4_KScrExist) |
+ (2 << CP0C4_IE) | (1U << CP0C4_M),
+ .CP0_Config5 = MIPS_CONFIG5 | (1 << CP0C5_MVH) | (1 << CP0C5_LLB),
+ .CP0_Config5_rw_bitmask = (1 << CP0C5_SBRI) | (1 << CP0C5_FRE) |
+ (1 << CP0C5_UFE),
+ .CP0_LLAddr_rw_bitmask = 0,
+ .CP0_LLAddr_shift = 0,
+ .SYNCI_Step = 32,
+ .CCRes = 2,
+ .CP0_Status_rw_bitmask = 0x3158FF1F,
+ .CP0_PageGrain = (1 << CP0PG_IEC) | (1 << CP0PG_XIE) |
+ (1U << CP0PG_RIE),
+ .CP0_PageGrain_rw_bitmask = 0,
+ .CP1_fcr0 = (1 << FCR0_FREP) | (1 << FCR0_HAS2008) | (1 << FCR0_F64) |
+ (1 << FCR0_L) | (1 << FCR0_W) | (1 << FCR0_D) |
+ (1 << FCR0_S) | (0x02 << FCR0_PRID) | (0x0 << FCR0_REV),
+ .CP1_fcr31 = (1 << FCR31_ABS2008) | (1 << FCR31_NAN2008),
+ .SEGBITS = 32,
+ .PABITS = 32,
+ .insn_flags = CPU_NANOMIPS32 | ASE_MICROMIPS | ASE_DSP | ASE_DSPR2 |
+ ASE_MT,
+ .mmu_type = MMU_TYPE_R4000,
+ },
#if defined(TARGET_MIPS64)
{
.name = "R4000",
--
2.7.4
^ permalink raw reply related [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 03/40] target/mips: Add nanoMIPS DSP ASE opcodes
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 03/40] target/mips: Add nanoMIPS DSP ASE opcodes Stefan Markovic
@ 2018-07-19 16:28 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-19 16:28 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> From: Stefan Markovic <smarkovic@wavecomp.com>
>
> Add nanoMIPS opcodes for DSP ASE instruction pools and instructions.
>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> ---
> target/mips/translate.c | 144 ++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 144 insertions(+)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 04/40] target/mips: Add decode_nanomips_opc() function
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 04/40] target/mips: Add decode_nanomips_opc() function Stefan Markovic
@ 2018-07-19 16:39 ` Richard Henderson
2018-07-24 10:56 ` Aleksandar Markovic
0 siblings, 1 reply; 89+ messages in thread
From: Richard Henderson @ 2018-07-19 16:39 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> decode_opc(env, ctx);
> } else if (ctx->insn_flags & ASE_MICROMIPS) {
> - ctx->opcode = cpu_lduw_code(env, ctx->base.pc_next);
> - insn_bytes = decode_micromips_opc(env, ctx);
> + if (env->insn_flags & ISA_NANOMIPS32) {
Be consistent and use ctx->insn_flags.
> + ctx->opcode = cpu_lduw_code(env, ctx->base.pc_next);
> + insn_bytes = decode_nanomips_opc(env, ctx);
> + } else {
> + ctx->opcode = cpu_lduw_code(env, ctx->base.pc_next);
> + insn_bytes = decode_micromips_opc(env, ctx);
> + }
> } else if (ctx->insn_flags & ASE_MIPS16) {
> ctx->opcode = cpu_lduw_code(env, ctx->base.pc_next);
Do you really want to nest nanoMIPS within microMIPS?
I would have thought a better structure was
} else if (ctx->insn_flags & ISA_NANOMIPS32) {
...
} else if (ctx->insn_flags & ASE_MICROMIPS) {
...
} else if (ctx->insn_flags & ASE_MIPS16) {
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 05/40] target/mips: Add nanoMIPS decoding and extraction utilities
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 05/40] target/mips: Add nanoMIPS decoding and extraction utilities Stefan Markovic
@ 2018-07-19 16:57 ` Richard Henderson
2018-07-24 11:00 ` Aleksandar Markovic
0 siblings, 1 reply; 89+ messages in thread
From: Richard Henderson @ 2018-07-19 16:57 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> +static int decode_gpr_gpr3(int r)
> +{
> + static const int map[] = { 16, 17, 18, 19, 4, 5, 6, 7 };
> +
> + return map[r & 0x7];
> +}
> +
> +static int decode_gpr_gpr4(int r)
> +{
> + static const int map[] = { 8, 9, 10, 11, 4, 5, 6, 7,
> + 16, 17, 18, 19, 20, 21, 22, 23 };
> +
> + return map[r & 0xf];
> +}
> +
> +/* Used for 16-bit store instructions. */
> +static int decode_gpr_gpr4_zero(int r)
I think it's worth spending one line to document the pseudocode function from
which each of these come. E.g.
/* Implement nanoMIPS pseudocode decode_gpr(encoded_gpr, 'gpr4.zero'). */
Which is certainly more accurate than the comment that is there currently.
Otherwise,
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 06/40] target/mips: Add emulation of misc nanoMIPS 16-bit instructions
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 06/40] target/mips: Add emulation of misc nanoMIPS 16-bit instructions Stefan Markovic
@ 2018-07-19 18:06 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-19 18:06 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> From: Yongbok Kim <yongbok.kim@mips.com>
>
> Add emulation of misc nanoMIPS 16-bit instructions from instruction
> pools P16, P16.BR, P16.BRI, P16.4X4 and other related pools.
>
> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> ---
> target/mips/translate.c | 258 ++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 258 insertions(+)
>
> diff --git a/target/mips/translate.c b/target/mips/translate.c
> index 4e6ae1f..798f977 100644
> --- a/target/mips/translate.c
> +++ b/target/mips/translate.c
> @@ -16502,6 +16502,264 @@ static int decode_gpr_gpr4_zero(int r)
>
> static int decode_nanomips_opc(CPUMIPSState *env, DisasContext *ctx)
> {
> + uint32_t op;
> + int rt = decode_gpr_gpr3(NANOMIPS_EXTRACT_RD(ctx->opcode));
> + int rs = decode_gpr_gpr3(NANOMIPS_EXTRACT_RS(ctx->opcode));
> + int rd = decode_gpr_gpr3(NANOMIPS_EXTRACT_RS1(ctx->opcode));
> +
> + /* make sure instructions are on a halfword boundary */
> + if (ctx->base.pc_next & 0x1) {
> + env->CP0_BadVAddr = ctx->base.pc_next;
You can't assign to ENV here. You must generate code to do this:
TCGv tmp = tcg_const_tl(ctx->base.pc_next);
tcg_gen_st_tl(tmp, cpu_env, offsetof(CPUMIPSState, CP0_BadVAddr));
tcg_temp_free(tmp);
> + generate_exception_end(ctx, EXCP_AdEL);
> + return 2;
> + }
> +
> + op = (ctx->opcode >> 10) & 0x3f;
> + switch (op) {
> + case NM_P16_MV:
> + {
> + int rt = NANOMIPS_EXTRACT_RD5(ctx->opcode);
> + if (rt != 0) {
> + /* MOVE */
> + int rs = NANOMIPS_EXTRACT_RS5(ctx->opcode);
> + gen_arith(ctx, OPC_ADDU, rt, rs, 0);
If you've any thought for nanoMIPS64 in future, consider using OR instead.
> + case NM_ADDIUR2:
> + {
> + uint8_t u = (uint8_t) extract32(ctx->opcode, 0, 3) << 2;
> + gen_arith_imm(ctx, OPC_ADDIU, rt, rs, u);
Drop the useless cast? And the variable, come to that; just above you extract
the immediate to gen_arith_imm as an argument.
> + }
> + break;
> + case NM_P_ADDIURS5:
> + {
> + int rt = extract32(ctx->opcode, 5, 5);
This shadows the outer rt variable. Just overwrite the original.
> + if (rt != 0) {
> + int s = (sextract32(ctx->opcode, 4, 1) << 3) |
> + extract32(ctx->opcode, 0, 3);
> + /* s = sign_extend( s[3] . s[2:0] , from_nbits = 4)*/
> + gen_arith_imm(ctx, OPC_ADDIU, rt, rt, s);
> + }
> + }
> + break;
> + }
> + break;
There's some really bad indentation going on here.
> + case NM_P16_4X4:
> + {
> + int rt = (extract32(ctx->opcode, 9, 1) << 3) |
> + extract32(ctx->opcode, 5, 3);
> + int rs = (extract32(ctx->opcode, 4, 1) << 3) |
> + extract32(ctx->opcode, 0, 3);
Shadowing again.
> + default:
> + /* P16.BRI */
> + if (extract32(ctx->opcode, 4, 3) < extract32(ctx->opcode, 7, 3)) {
These are already extracted into rs and rt...
> + /* BEQC16 */
> + gen_compute_branch(ctx, OPC_BEQ, 2, rs, rt,
> + extract32(ctx->opcode, 0, 4) << 1, 0);
... which you are using here.
And surely, merge these as
gen_compute_branch(ctx, rs < rt ? OPC_BEQ : OPC_BNE, 2, rs, rt,
extract32(ctx->opcode, 0, 4) << 1, 0);
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 07/40] target/mips: Add emulation of nanoMIPS 16-bit load and store instructions
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 07/40] target/mips: Add emulation of nanoMIPS 16-bit load and store instructions Stefan Markovic
@ 2018-07-19 18:28 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-19 18:28 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> +/* Used for 16-bit store instructions. */
> +static int decode_gpr_gpr3_src_store(int r)
> +{
> + static const int map[] = { 0, 17, 18, 19, 4, 5, 6, 7 };
> +
> + return map[r & 0x7];
> +}
Same comment re comment as before.
> case NM_P16_LB:
> + {
> + uint32_t u = extract32(ctx->opcode, 0, 2);
> + switch (((ctx->opcode) >> 2) & 0x03) {
> + case NM_LB16:
> + gen_ld(ctx, OPC_LB, rt, rs, u);
> + break;
> + case NM_SB16:
> + {
> + int rt = decode_gpr_gpr3_src_store(
> + NANOMIPS_EXTRACT_RD(ctx->opcode));
Shadowing outer rt variable. And indeed, NANOMIPS_EXTRACT_RD has already been
extracted into it, so this becomes just
rt = decode_gpr_gpr3_src_store(rt);
Similarly throughout the rest of this file.
Consider creating one "int imm" variable at the top of the function that you
can reuse for all of these immediate value extractions and not have to create
these local variable blocks.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 09/40] target/mips: Add emulation of nanoMIPS 16-bit save and restore instructions
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 09/40] target/mips: Add emulation of nanoMIPS 16-bit save and restore instructions Stefan Markovic
@ 2018-07-19 18:34 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-19 18:34 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> + int rt = 30 + ((ctx->opcode >> 9) & 1);
> + switch ((ctx->opcode >> 8) & 1) {
extract32.
Otherwise,
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 10/40] target/mips: Add emulation of some common nanoMIPS 32-bit instructions
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 10/40] target/mips: Add emulation of some common nanoMIPS 32-bit instructions Stefan Markovic
@ 2018-07-19 18:52 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-19 18:52 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> + case NM_P_ADDIU:
> + if (rt == 0) {
> + /* P.RI */
> + switch ((ctx->opcode >> 19) & 0x03) {
> + case NM_SIGRIE:
> + default:
> + generate_exception_end(ctx, EXCP_RI);
> + break;
> + case NM_P_SYSCALL:
> + if (((ctx->opcode >> 18) & 0x01) == NM_SYSCALL) {
> + generate_exception_end(ctx, EXCP_SYSCALL);
> + } else {
> + generate_exception_end(ctx, EXCP_RI);
> + }
> + break;
> + case NM_BREAK:
> + generate_exception_end(ctx, EXCP_BREAK);
> + break;
> + case NM_SDBBP:
> + if (is_uhi(extract32(ctx->opcode, 0, 19))) {
> + gen_helper_do_semihosting(cpu_env);
> + } else {
> + if (ctx->hflags & MIPS_HFLAG_SBRI) {
> + generate_exception_end(ctx, EXCP_RI);
> + } else {
> + generate_exception_end(ctx, EXCP_DBp);
> + }
> + }
> + break;
> + }
> + } else {
> + uint16_t imm;
> + imm = (uint16_t) extract32(ctx->opcode, 0, 16);
> + if (rs != 0) {
> + tcg_gen_addi_tl(cpu_gpr[rt], cpu_gpr[rs], imm);
> + tcg_gen_ext32s_tl(cpu_gpr[rt], cpu_gpr[rt]);
> + } else {
> + tcg_gen_movi_tl(cpu_gpr[rt], imm);
This misses the sign-extend that is required.
I suggest not special-casing 0 at all, since
tcg_gen_andi_tl will already elide the add for 0.
> + case NM_ADDIUPC:
> + if (rt != 0) {
> + int32_t offset = sextract32(ctx->opcode, 0, 1) << 21
> + | extract32(ctx->opcode, 1, 20) << 1;
> + target_long addr = addr_add(ctx, ctx->base.pc_next + 4, offset);
> + tcg_gen_movi_tl(cpu_gpr[rt], addr);
> + tcg_gen_ext32s_tl(cpu_gpr[rt], cpu_gpr[rt]);
Do not sign-extend in tcg ops; do it during translation via
tcg_gen_movi_tl(cpu_gpr[rt], (int32_t)addr);
> + case NM_P_GP_W:
> + switch (ctx->opcode & 0x03) {
> + case NM_ADDIUGP_W:
> + if (rt != 0) {
> + uint32_t offset = extract32(ctx->opcode, 0, 21);
> + if (offset == 0) {
> + gen_load_gpr(cpu_gpr[rt], 28);
> + } else {
> + TCGv t0;
> + t0 = tcg_temp_new();
> + tcg_gen_movi_tl(t0, offset);
> + gen_op_addr_add(ctx, cpu_gpr[rt], cpu_gpr[28], t0);
> + tcg_temp_free(t0);
This misses out on the sign extend for mips64 when pointers are 32 bits and
offset == 0. Again, dropping the special case for 0 will do everything right.
> + case NM_SLTI:
> + gen_slt_imm(ctx, OPC_SLTI, rt, rs, extract32(ctx->opcode, 0, 12));
> + break;
> + case NM_SLTIU:
> + gen_slt_imm(ctx, OPC_SLTIU, rt, rs, extract32(ctx->opcode, 0, 12));
> + break;
> + case NM_SEQI:
> + {
> + TCGv t0 = tcg_temp_new();
> + TCGv t1 = tcg_temp_new();
> + TCGv t2 = tcg_temp_local_new();
> + TCGLabel *l1 = gen_new_label();
> +
> + gen_load_gpr(t0, rs);
> + tcg_gen_movi_tl(t1, extract32(ctx->opcode, 0, 12));
> + tcg_gen_movi_tl(t2, 0);
> + tcg_gen_brcond_tl(TCG_COND_NE, t0, t1, l1);
> + tcg_gen_movi_tl(t2, 1);
> + gen_set_label(l1);
> + gen_store_gpr(t2, rt);
Use tcg_gen_setcondi_tl.
> + case NM_P_SHIFT:
> + {
> + int shift = extract32(ctx->opcode, 0, 5);
> + switch ((ctx->opcode >> 5) & 0x0f) {
> + case NM_P_SLL:
> + if (rt == 0 && shift == 0) {
> + /* NOP */
> + } else if (rt == 0 && shift == 3) {
> + /* EHB treat as NOP */
> + } else if (rt == 0 && shift == 5) {
> + /* PAUSE */
> + if (ctx->hflags & MIPS_HFLAG_BMASK) {
> + generate_exception_end(ctx, EXCP_RI);
> + }
> + } else if (rt == 0 && shift == 6) {
> + /* SYNC */
> + check_insn(ctx, ISA_MIPS2);
> + /* Treat as NOP. */
Use gen_sync.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 11/40] target/mips: Add emulation of nanoMIPS 48-bit instructions
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 11/40] target/mips: Add emulation of nanoMIPS 48-bit instructions Stefan Markovic
@ 2018-07-19 19:01 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-19 19:01 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> case NM_P48I:
> + insn = cpu_lduw_code(env, ctx->base.pc_next + 4);
> + switch ((ctx->opcode >> 16) & 0x1f) {
> + case NM_LI48:
> + if (rt != 0) {
> + tcg_gen_movi_tl(cpu_gpr[rt],
> + extract32(ctx->opcode, 0, 16) | insn << 16);
It's probably worthwhile to hoist the offset computation above the switch; it
is used identically in every case.
> + case NM_ADDIUGP48:
> + if (rt != 0) {
> + tcg_gen_addi_tl(cpu_gpr[rt], cpu_gpr[28],
> + extract32(ctx->opcode, 0, 16) | insn << 16);
> + tcg_gen_ext32s_tl(cpu_gpr[rt], cpu_gpr[rt]);
This should use gen_op_addr_add (behaves_like('DADDIU[GP48]')).
> + case NM_ADDIUPC48:
> + if (rt != 0) {
> + int32_t offset = extract32(ctx->opcode, 0, 16) | insn << 16;
> + target_long addr = addr_add(ctx, ctx->base.pc_next + 6, offset);
> +
> + tcg_gen_movi_tl(cpu_gpr[rt], addr);
> + tcg_gen_ext32s_tl(cpu_gpr[rt], cpu_gpr[rt]);
No sign-extend needed; already done in addr_add.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 12/40] target/mips: Add emulation of nanoMIPS FP instructions
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 12/40] target/mips: Add emulation of nanoMIPS FP instructions Stefan Markovic
@ 2018-07-19 19:03 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-19 19:03 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> +static void gen_pool32f_nanomips_insn(DisasContext *ctx)
> +{
> + int rt, rs, rd;
> +
> + rt = (ctx->opcode >> 21) & 0x1f;
> + rs = (ctx->opcode >> 16) & 0x1f;
> + rd = (ctx->opcode >> 11) & 0x1f;
extract32?
Otherwise,
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 13/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32a0)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 13/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32a0) Stefan Markovic
@ 2018-07-19 19:08 ` Richard Henderson
2018-07-25 15:38 ` Aleksandar Markovic
0 siblings, 1 reply; 89+ messages in thread
From: Richard Henderson @ 2018-07-19 19:08 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> From: Yongbok Kim <yongbok.kim@mips.com>
>
> Add emulation of nanoMIPS instructions that are situated in pool32a0.
>
> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> ---
> target/mips/translate.c | 190 ++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 190 insertions(+)
>
> diff --git a/target/mips/translate.c b/target/mips/translate.c
> index 2c7f62e..81c2950 100644
> --- a/target/mips/translate.c
> +++ b/target/mips/translate.c
> @@ -16588,6 +16588,186 @@ static void gen_pool16c_nanomips_insn(DisasContext *ctx)
> }
> }
>
> +static void gen_pool32a0_nanomips_insn(DisasContext *ctx)
> +{
> + int rt = (ctx->opcode >> 21) & 0x1f;
> + int rs = (ctx->opcode >> 16) & 0x1f;
> + int rd = (ctx->opcode >> 11) & 0x1f;
extract32.
> + case NM_SOV:
> + {
> + TCGv t0 = tcg_temp_local_new();
> + TCGv t1 = tcg_temp_new();
> + TCGv t2 = tcg_temp_new();
> + TCGLabel *l1 = gen_new_label();
> +
> + gen_load_gpr(t1, rs);
> + gen_load_gpr(t2, rt);
> + tcg_gen_add_tl(t0, t1, t2);
> + tcg_gen_ext32s_tl(t0, t0);
> + tcg_gen_xor_tl(t1, t1, t2);
> + tcg_gen_xor_tl(t2, t0, t2);
> + tcg_gen_andc_tl(t1, t2, t1);
> +
> + tcg_gen_movi_tl(t0, 0);
> + tcg_gen_brcondi_tl(TCG_COND_GE, t1, 0, l1);
tcg_gen_setcondi_tl.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 14/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32axf)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 14/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32axf) Stefan Markovic
@ 2018-07-19 19:13 ` Richard Henderson
2018-07-20 16:15 ` Aleksandar Markovic
0 siblings, 1 reply; 89+ messages in thread
From: Richard Henderson @ 2018-07-19 19:13 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> +static void gen_pool32axf_nanomips_insn(CPUMIPSState *env, DisasContext *ctx)
> +{
> + int rt = (ctx->opcode >> 21) & 0x1f;
> + int rs = (ctx->opcode >> 16) & 0x1f;
> +
> + switch ((ctx->opcode >> 6) & 0x07) {
extract32.
> case NM_POOL32A7:
> + {
> + switch ((ctx->opcode >> 3) & 0x07) {
> + case NM_POOL32AXF:
> + gen_pool32axf_nanomips_insn(env, ctx);
> + break;
> + }
> + }
Bad indentation of a block that need not exist anyway.
Otherwise,
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 15/40] target/mips: Add emulation of misc nanoMIPS instructions (pool p_lsx)
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 15/40] target/mips: Add emulation of misc nanoMIPS instructions (pool p_lsx) Stefan Markovic
@ 2018-07-19 19:19 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-19 19:19 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> +static void gen_p_lsx(DisasContext *ctx, int rd, int rs, int rt)
> +{
> + TCGv t0, t1;
> + t0 = tcg_temp_new();
> + t1 = tcg_temp_new();
> + tcg_gen_movi_tl(t1, 0);
> + if (rs == 0) {
> + tcg_gen_movi_tl(t0, 0);
> + } else {
> + gen_load_gpr(t0, rs);
> + }
> + if (rt == 0) {
> + tcg_gen_movi_tl(t1, 0);
> + } else {
> + gen_load_gpr(t1, rt);
> + }
gen_load_gpr already takes care of register 0.
And what is that initial redundant assignment to t1?
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 16/40] target/mips: Implement emulation of nanoMIPS ROTX instruction
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 16/40] target/mips: Implement emulation of nanoMIPS ROTX instruction Stefan Markovic
@ 2018-07-19 19:19 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-19 19:19 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> From: Matthew Fortune <matthew.fortune@mips.com>
>
> Added a helper for ROTX based on the pseudocode from the
> architecture spec. This instraction was not present in previous
> MIPS instruction sets.
>
> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> ---
> target/mips/helper.h | 2 ++
> target/mips/op_helper.c | 94 +++++++++++++++++++++++++++++++++++++++++++++++++
> target/mips/translate.c | 15 ++++++++
> 3 files changed, 111 insertions(+)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 17/40] target/mips: Implement emulation of nanoMIPS EXTW instruction
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 17/40] target/mips: Implement emulation of nanoMIPS EXTW instruction Stefan Markovic
@ 2018-07-19 20:59 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-19 20:59 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> From: James Hogan <james.hogan@mips.com>
>
> Implement emulation of nanoMIPS EXTW instruction, which is similar to
> the MIPS r6 ALIGN instruction, except that it counts the other way and
> in bits instead of bytes. We therefore generalise gen_align() into
> gen_align_bits() (which counts in bits instead of bytes and optimises
> when bits = size of the word), and implement gen_align() and a new
> gen_ext() based on that. Since we need to know the word size to check
> for when the number of bits == the word size, the opc argument is
> replaced with a wordsz argument (either 32 or 64).
>
> Signed-off-by: James Hogan <james.hogan@mips.com>
> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> ---
> target/mips/translate.c | 53 +++++++++++++++++++++++++++++++++----------------
> 1 file changed, 36 insertions(+), 17 deletions(-)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 18/40] target/mips: Add emulation of nanoMIPS 32-bit load and store instructions
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 18/40] target/mips: Add emulation of nanoMIPS 32-bit load and store instructions Stefan Markovic
@ 2018-07-20 4:59 ` Richard Henderson
2018-07-25 15:46 ` Aleksandar Markovic
2018-07-25 19:32 ` Peter Maydell
0 siblings, 2 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-20 4:59 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> + case NM_ADDIUGP_B:
> + gen_arith_imm(ctx, OPC_ADDIU, rt, 28, u);
> + break;
Use gen_op_addr_add, since behaves_like('DADDIU[GP.B]').
> case NM_P_LS_U12:
> + {
> + uint32_t u = extract32(ctx->opcode, 0, 12);
> + switch ((ctx->opcode >> 12) & 0x0f) {
> + case NM_P_PREFU12:
> + if (rt == 31) {
> + /* SYNCI */
> + /* Break the TB to be able to sync copied instructions
> + immediately */
> + ctx->base.is_jmp = DISAS_STOP;
I'll note for future cleanup that while this matches all of the other instances
of SYNCI in target/mips/, this is not actually required.
QEMU supports self-modifying code without any barriers or breaks whatsoever.
(Becuase, of course, i386 as a guest requires this.)
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 19/40] target/mips: Add emulation of nanoMIPS branch instructions
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 19/40] target/mips: Add emulation of nanoMIPS branch instructions Stefan Markovic
@ 2018-07-20 5:28 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-20 5:28 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> +/* Immediate Value Compact Branches */
> +static void gen_compute_imm_branch(DisasContext *ctx, uint32_t opc,
> + int rt, int32_t imm, int32_t offset)
> +{
> + int bcond_compute = 0;
> + TCGv t0 = tcg_temp_new();
> + TCGv t1 = tcg_temp_new();
> +
> + if (ctx->hflags & MIPS_HFLAG_BMASK) {
> +#ifdef MIPS_DEBUG_DISAS
> + LOG_DISAS("Branch in delay / forbidden slot at PC 0x" TARGET_FMT_lx
> + "\n", ctx->base.pc_next);
> +#endif
> + generate_exception_end(ctx, EXCP_RI);
> + goto out;
> + }
> +
> + gen_load_gpr(t0, rt);
> + tcg_gen_movi_tl(t1, imm);
> + ctx->btarget = addr_add(ctx, ctx->base.pc_next + 4, offset);
> +
> + /* Load needed operands and calculate btarget */
> + switch (opc) {
> + case NM_BEQIC:
> + if (rt == 0 && imm == 0) {
> + /* Unconditional branch */
> + } else if (rt == 0 && imm != 0) {
> + /* Treat as NOP */
> + goto out;
Surely this misses out on tracking the forbidden slot.
Given how infrequently these cases happen, is it really
worth special casing these at all?
Etc, througout this patch.
> + if (bcond_compute == 0) {
> + /* Uncoditional compact branch */
> + ctx->hflags |= MIPS_HFLAG_B;
> + /* Generating branch here as compact branches don't have delay slot */
> + gen_branch(ctx, 4);
> + } else {
> + /* Conditional compact branch */
> + TCGLabel *fs = gen_new_label();
> + save_cpu_state(ctx, 0);
> +
> + switch (opc) {
> + case NM_BEQIC:
> + tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_EQ), t0, t1, fs);
> + break;
> + case NM_BBEQZC:
> + tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_EQ), t0, t1, fs);
> + break;
> + case NM_BNEIC:
> + tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_NE), t0, t1, fs);
> + break;
> + case NM_BBNEZC:
> + tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_NE), t0, t1, fs);
> + break;
> + case NM_BGEIC:
> + tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_GE), t0, t1, fs);
> + break;
> + case NM_BLTIC:
> + tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_LT), t0, t1, fs);
> + break;
> + case NM_BGEIUC:
> + tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_GEU), t0, t1, fs);
> + break;
> + case NM_BLTIUC:
> + tcg_gen_brcond_tl(tcg_invert_cond(TCG_COND_LTU), t0, t1, fs);
> + break;
> + }
I think you should, in the previous switch, store these conditions into a
variable. Then squish this switch out and just have one brcond.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 14/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32axf)
2018-07-19 19:13 ` Richard Henderson
@ 2018-07-20 16:15 ` Aleksandar Markovic
0 siblings, 0 replies; 89+ messages in thread
From: Aleksandar Markovic @ 2018-07-20 16:15 UTC (permalink / raw)
To: Richard Henderson, Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
Stefan Markovic, Petar Jovanovic, Paul Burton
> From: Richard Henderson <richard.henderson@linaro.org>
> Sent: Thursday, July 19, 2018 9:13 PM
>
> > case NM_POOL32A7:
> > + {
> > + switch ((ctx->opcode >> 3) & 0x07) {
> > + case NM_POOL32AXF:
> > + gen_pool32axf_nanomips_insn(env, ctx);
> > + break;
> > + }
> > + }
>
> Bad indentation of a block that need not exist anyway.
>
> Otherwise,
> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Outer braces are unnecessary. The switch is missing the default case. This switch statement is amended in one of subsequent patches, and at the end it contains four cases, but no default case. The missing default should be fixed in this patch.
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 20/40] target/mips: Implement MT ASE support for nanoMIPS
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 20/40] target/mips: Implement MT ASE support for nanoMIPS Stefan Markovic
@ 2018-07-21 15:19 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-21 15:19 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> + tcg_temp_free(t0);
> + }
> + break;
> + case NM_FORK:
> + check_insn(ctx, ASE_MT);
Watch the indentation.
Otherwise,
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 21/40] target/mips: Implement DSP ASE support for nanoMIPS
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 21/40] target/mips: Implement DSP " Stefan Markovic
@ 2018-07-21 15:52 ` Richard Henderson
2018-07-21 18:04 ` Richard Henderson
1 sibling, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-21 15:52 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> + case OPC_APPEND:
> + {
> + TCGv t0;
> +
> + t0 = tcg_temp_new();
> + gen_load_gpr(t0, rs);
> +
> + if (rd != 0) {
> + tcg_gen_deposit_tl(cpu_gpr[rt], t0, cpu_gpr[rt], rd, 32 - rd);
> + }
> + tcg_gen_ext32s_tl(cpu_gpr[rt], cpu_gpr[rt]);
> + }
> + break;
> + case OPC_MODSUB:
Indentation. Probably should hoist t0 to the top of the function anyway.
> + case OPC_SHILO:
> + {
> + TCGv t0;
> + TCGv t1;
> + t0 = tcg_temp_new();
> + t1 = tcg_temp_new();
> +
> + int16_t imm = (ctx->opcode >> 16) & 0x3F;
> +
> + tcg_gen_movi_tl(t0, rd >> 3);
> + tcg_gen_movi_tl(t1, imm);
> +
> + gen_helper_shilo(t0, t1, cpu_env);
> + }
> + break;
> + case OPC_MULEQ_S_W_PHL:
Indentation. Shadowing outer t1 (and t0 if you move the one above).
And for future cleanup, helper_shilo is much easier to implement inline.
> + case OPC_SHLL_S_W:
> + {
> + TCGv t0;
> + t0 = tcg_temp_new();
> + tcg_gen_movi_tl(t0, rd);
> +
> + check_dsp(ctx);
> + gen_helper_shll_s_w(cpu_gpr[rt], t0, v1_t, cpu_env);
> + break;
> + }
> + break;
> + case OPC_REPL_PH:
> + check_dsp(ctx);
> + {
Indentation. I won't mention any more, but please fix them all.
> - NM_LWUX = 0x07,
> - NM_SWC1X = 0x0b,
> - NM_SDC1X = 0x0f,
> + NM_LWUX = 0x07,
> + NM_SWC1X = 0x0b,
> + NM_SDC1X = 0x0f,
What has changed here? Actually, looking further down in the patch, something
really odd -- and large -- has happened. Did you rearrange functions or
something? Whatever it is, it should be folded back into the patch that
introduced them.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 22/40] target/mips: Add handling of branch delay slots for nanoMIPS
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 22/40] target/mips: Add handling of branch delay slots " Stefan Markovic
@ 2018-07-21 18:03 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-21 18:03 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> @@ -10991,7 +10992,8 @@ static void gen_branch(DisasContext *ctx, int insn_bytes)
> break;
> case MIPS_HFLAG_BR:
> /* unconditional branch to register */
> - if (ctx->insn_flags & (ASE_MIPS16 | ASE_MICROMIPS)) {
> + if (ctx->has_isa_mode &&
> + (ctx->insn_flags & (ASE_MIPS16 | ASE_MICROMIPS))) {
Is this second condition really ever true for ISA_NANOMIPS?
> @@ -24747,6 +24749,7 @@ static void mips_tr_init_disas_context(DisasContextBase *dcbase, CPUState *cs)
> ctx->mrp = (env->CP0_Config5 >> CP0C5_MRP) & 1;
> ctx->nan2008 = (env->active_fpu.fcr31 >> FCR31_NAN2008) & 1;
> ctx->abs2008 = (env->active_fpu.fcr31 >> FCR31_ABS2008) & 1;
> + ctx->has_isa_mode = ((env->CP0_Config3 >> CP0C3_MMAR) & 0x7) != 3;
< 3?
Or perhaps merge the combined test here,
ctx->has_isa_mode = (ctx->insn_flags & (ASE_MIPS16 | ASE_MICROMIPS))
&& ((env->CP0_Config3 >> CP0C3_MMAR) & 0x7) < 3);
and only use ctx->has_isa_mode in the other locations.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 21/40] target/mips: Implement DSP ASE support for nanoMIPS
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 21/40] target/mips: Implement DSP " Stefan Markovic
2018-07-21 15:52 ` Richard Henderson
@ 2018-07-21 18:04 ` Richard Henderson
1 sibling, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-21 18:04 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> + gen_helper_cmpgu_eq_qb(t1, v1_t, v2_t);
> + tcg_gen_mov_tl(cpu_gpr[ret], t1);
> + tcg_gen_andi_tl(cpu_dspctrl, cpu_dspctrl, 0xF0FFFFFF);
> + tcg_gen_shli_tl(t1, t1, 24);
> + tcg_gen_or_tl(cpu_dspctrl, cpu_dspctrl, t1);
Better as
gen_helper_cmpgu_eq_qb(cpu_gpr[ret], v1_t, v2_t);
tcg_gen_deposit_tl(cpu_dspctrl, cpu_dspctrl, cpu_gpr[ret], 24, 4);
and the several repetitions.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 23/40] target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 23/40] target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair Stefan Markovic
@ 2018-07-21 18:15 ` Richard Henderson
2018-07-23 17:21 ` Aleksandar Markovic
2018-07-27 15:29 ` Aleksandar Markovic
0 siblings, 2 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-21 18:15 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> From: Yongbok Kim <yongbok.kim@mips.com>
>
> Implement nanoMIPS LLWP and SCWP instruction pair.
>
> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> ---
> linux-user/mips/cpu_loop.c | 25 ++++++++---
> target/mips/cpu.h | 2 +
> target/mips/helper.h | 2 +
> target/mips/op_helper.c | 35 +++++++++++++++
> target/mips/translate.c | 107 +++++++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 166 insertions(+), 5 deletions(-)
Hmm. Well, it's ok as far as it goes, but I'd really really like to see
target/mips to be updated to use actual atomic operations. Otherwise
mips*-linux-user will never be reliable and mips*-softmmu cannot run SMP in
multi-threaded mode.
While converting the rest of target/mips to atomic operations is perhaps out of
scope for this patch set, there's really no reason not to do these two
instructions correctly from the start. It'll save the trouble of rewriting
them from scratch later.
Please see target/arm/translate.c, gen_load_exclusive and gen_store_exclusive,
for the size == 3 case. That is arm32 doing a 64-bit "paired" atomic
operation, just like you are attempting here.
Note that single-copy atomic semantics apply in both cases, so LLWP must
perform one 64-bit load, not two 32-bit loads. The store in SCWP must happen
with a 64-bit atomic cmpxchg operation.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 25/40] target/mips: Add updating CP0 BadInstrX register for nanoMIPs only
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 25/40] target/mips: Add updating CP0 BadInstrX register for nanoMIPs only Stefan Markovic
@ 2018-07-23 16:35 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-23 16:35 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> From: Stefan Markovic <smarkovic@wavecomp.com>
>
> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> ---
> target/mips/helper.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/target/mips/helper.c b/target/mips/helper.c
> index 5299f21..9535131 100644
> --- a/target/mips/helper.c
> +++ b/target/mips/helper.c
> @@ -695,6 +695,12 @@ static inline void set_badinstr_registers(CPUMIPSState *env)
> instr |= cpu_lduw_code(env, env->active_tc.PC + 2);
> }
> env->CP0_BadInstr = instr;
> +
> + if ((env->insn_flags & ISA_NANOMIPS32) &&
> + ((instr & 0xFC000000) == 0x60000000)) {
> + instr = cpu_lduw_code(env, env->active_tc.PC + 4) << 16;
> + env->CP0_BadInstrX = instr;
> + }
The nanomips condition has been checked just above.
This patch should probably be merged with 24/40.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 24/40] target/mips: Add updating BadInstr and BadInstrP registers for nanoMIPS
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 24/40] target/mips: Add updating BadInstr and BadInstrP registers for nanoMIPS Stefan Markovic
@ 2018-07-23 16:36 ` Richard Henderson
2018-07-24 10:47 ` Aleksandar Markovic
1 sibling, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-23 16:36 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> + if (!(env->insn_flags & ISA_NANOMIPS32)) {
> + /* TODO: add BadInstr support for pre-nanoMIPS */
> + return;
> + }
> + if (env->CP0_Config3 & (1 << CP0C3_BI)) {
> + instr = (cpu_lduw_code(env, env->active_tc.PC)) << 16;
> + if ((env->insn_flags & ISA_NANOMIPS32) &&
Redundant check for nanomips.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 26/40] target/mips: Implement CP0 Config0.WR bit functionality
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 26/40] target/mips: Implement CP0 Config0.WR bit functionality Stefan Markovic
@ 2018-07-23 16:46 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-23 16:46 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> From: Stefan Markovic <smarkovic@wavecomp.com>
>
> Add testing Config0.WR bit into watch exception handling logic.
Config1, here and in the subject.
>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> ---
> target/mips/helper.c | 12 +++++++++++-
> target/mips/translate.c | 22 ++++++++++++++++------
> 2 files changed, 27 insertions(+), 7 deletions(-)
>
> diff --git a/target/mips/helper.c b/target/mips/helper.c
> index 9535131..dc8f2a5 100644
> --- a/target/mips/helper.c
> +++ b/target/mips/helper.c
> @@ -749,6 +749,14 @@ void mips_cpu_do_interrupt(CPUState *cs)
> (env->hflags & MIPS_HFLAG_DM)) {
> cs->exception_index = EXCP_DINT;
> }
> +
> + if ((cs->exception_index == EXCP_DWATCH ||
> + cs->exception_index == EXCP_DFWATCH ||
> + cs->exception_index == EXCP_IWATCH) &&
> + (env->CP0_Config1 & (1 << CP0C1_WR))) {
> + cs->exception_index = EXCP_NONE;
> + }
This will cause the switch below to abort.
In any case, I think this test is a mistake -- you should have (and probably
did, given a presumed lack of abort during testing) prevent these exceptions
from being triggered in the first place.
> case EXCP_SRESET:
> env->CP0_Status |= (1 << CP0St_SR);
> - memset(env->CP0_WatchLo, 0, sizeof(env->CP0_WatchLo));
> + if (env->CP0_Config1 & (1 << CP0C1_WR)) {
> + memset(env->CP0_WatchLo, 0, sizeof(env->CP0_WatchLo));
> + }
If it's unused/missing, why does it hurt to reset to 0?
> --- a/target/mips/translate.c
> +++ b/target/mips/translate.c
> @@ -5622,6 +5622,7 @@ static void gen_mfc0(DisasContext *ctx, TCGv arg, int reg, int sel)
> case 5:
> case 6:
> case 7:
> + CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
> gen_helper_1e0i(mfc0_watchlo, arg, sel);
> rn = "WatchLo";
> break;
> @@ -5639,6 +5640,7 @@ static void gen_mfc0(DisasContext *ctx, TCGv arg, int reg, int sel)
> case 5:
> case 6:
> case 7:
> + CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
> gen_helper_1e0i(mfc0_watchhi, arg, sel);
> rn = "WatchHi";
> break;
> @@ -6321,6 +6323,7 @@ static void gen_mtc0(DisasContext *ctx, TCGv arg, int reg, int sel)
> case 5:
> case 6:
> case 7:
> + CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
> gen_helper_0e1i(mtc0_watchlo, arg, sel);
> rn = "WatchLo";
> break;
> @@ -6338,6 +6341,7 @@ static void gen_mtc0(DisasContext *ctx, TCGv arg, int reg, int sel)
> case 5:
> case 6:
> case 7:
> + CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
> gen_helper_0e1i(mtc0_watchhi, arg, sel);
> rn = "WatchHi";
> break;
> @@ -7024,6 +7028,7 @@ static void gen_dmfc0(DisasContext *ctx, TCGv arg, int reg, int sel)
> case 5:
> case 6:
> case 7:
> + CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
> gen_helper_1e0i(dmfc0_watchlo, arg, sel);
> rn = "WatchLo";
> break;
> @@ -7041,6 +7046,7 @@ static void gen_dmfc0(DisasContext *ctx, TCGv arg, int reg, int sel)
> case 5:
> case 6:
> case 7:
> + CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
> gen_helper_1e0i(mfc0_watchhi, arg, sel);
> rn = "WatchHi";
> break;
> @@ -7705,6 +7711,7 @@ static void gen_dmtc0(DisasContext *ctx, TCGv arg, int reg, int sel)
> case 5:
> case 6:
> case 7:
> + CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
> gen_helper_0e1i(mtc0_watchlo, arg, sel);
> rn = "WatchLo";
> break;
> @@ -7722,6 +7729,7 @@ static void gen_dmtc0(DisasContext *ctx, TCGv arg, int reg, int sel)
> case 5:
> case 6:
> case 7:
> + CP0_CHECK(ctx->CP0_Config1 & (1 << CP0C1_WR));
> gen_helper_0e1i(mtc0_watchhi, arg, sel);
> rn = "WatchHi";
> break;
These are probably the only changes required -- preventing the missing
registers from being set at runtime.
> @@ -25281,14 +25289,16 @@ void cpu_state_reset(CPUMIPSState *env)
> no performance counters. */
> env->CP0_IntCtl = 0xe0000000;
> {
> - int i;
> + if (env->CP0_Config1 & (1 << CP0C1_WR)) {
> + int i;
>
> - for (i = 0; i < 7; i++) {
> - env->CP0_WatchLo[i] = 0;
> - env->CP0_WatchHi[i] = 0x80000000;
> + for (i = 0; i < 7; i++) {
> + env->CP0_WatchLo[i] = 0;
> + env->CP0_WatchHi[i] = 0x80000000;
> + }
> + env->CP0_WatchLo[7] = 0;
> + env->CP0_WatchHi[7] = 0;
> }
> - env->CP0_WatchLo[7] = 0;
> - env->CP0_WatchHi[7] = 0;
> }
Again, what difference does the reset value make?
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 27/40] target/mips: Adjust behavior of Config3's ISAOnExc bit for nanoMIPS
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 27/40] target/mips: Adjust behavior of Config3's ISAOnExc bit for nanoMIPS Stefan Markovic
@ 2018-07-23 16:48 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-23 16:48 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> - if (env->insn_flags & ASE_MICROMIPS) {
> + if ((env->insn_flags & ASE_MICROMIPS) &&
> + !(env->insn_flags & ISA_NANOMIPS32)) {
Why is ASE_MICROMIPS ever set at the same time as ISA_NANOMIPS?
This change ought not be necessary, AFAIU.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 28/40] target/mips: Adjust exception_resume_pc() for nanoMIPS
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 28/40] target/mips: Adjust exception_resume_pc() " Stefan Markovic
@ 2018-07-23 16:54 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-23 16:54 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:55 AM, Stefan Markovic wrote:
> From: James Hogan <james.hogan@mips.com>
>
> We shouldn't set the ISA bit in CP0_EPC for nanoMIPS.
>
> Signed-off-by: James Hogan <james.hogan@mips.com>
> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> ---
> target/mips/helper.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/target/mips/helper.c b/target/mips/helper.c
> index dc8f2a5..fb47018 100644
> --- a/target/mips/helper.c
> +++ b/target/mips/helper.c
> @@ -656,7 +656,8 @@ target_ulong exception_resume_pc (CPUMIPSState *env)
> target_ulong bad_pc;
> target_ulong isa_mode;
>
> - isa_mode = !!(env->hflags & MIPS_HFLAG_M16);
> + isa_mode = env->hflags & MIPS_HFLAG_M16 &&
> + !(env->insn_flags & ISA_NANOMIPS32);
Is there a compelling reason to have MIPS_HFLAG_M16 *set* for ISA_NANOMIPS?
This seems like the 6th or 7th patch that works around M16. If M16 were always
unset for nanomips, it would have avoided a lot of extra effort, it would seem.
In addition, looking at the fully patched tree and grepping for HFLAG_M16,
there appear to be further uses that have been missed for the extra NANOMIPS check.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 29/40] target/mips: Adjust set_hflags_for_handler() for nanoMIPS
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 29/40] target/mips: Adjust set_hflags_for_handler() " Stefan Markovic
@ 2018-07-23 16:54 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-23 16:54 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:55 AM, Stefan Markovic wrote:
> From: James Hogan <james.hogan@mips.com>
>
> We shouldn't clear M16 mode when entering an interrupt on nanoMIPS,
> otherwise we'll start interpreting the code as normal MIPS code.
>
> Signed-off-by: James Hogan <james.hogan@mips.com>
> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> ---
> target/mips/helper.c | 3 +++
> 1 file changed, 3 insertions(+)
See my comments for 28/40.
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 30/40] target/mips: Adjust set_pc() for nanoMIPS
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 30/40] target/mips: Adjust set_pc() " Stefan Markovic
@ 2018-07-23 16:55 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-23 16:55 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:55 AM, Stefan Markovic wrote:
> From: James Hogan <james.hogan@mips.com>
>
> ERET and ERETNC shouldn't clear MIPS_HFLAG_M16 for nanoMIPS since there
> is no ISA bit, so fix set_pc() to skip the hflags update.
>
> Signed-off-by: James Hogan <james.hogan@mips.com>
> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> ---
> target/mips/op_helper.c | 4 ++++
> 1 file changed, 4 insertions(+)
See my comments for 28/40.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 31/40] target/mips: Fix ERET/ERETNC behavior related to ADEL exception
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 31/40] target/mips: Fix ERET/ERETNC behavior related to ADEL exception Stefan Markovic
@ 2018-07-23 16:56 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-23 16:56 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:55 AM, Stefan Markovic wrote:
> if (env->insn_flags & ISA_NANOMIPS32) {
> /* Don't clear MIPS_HFLAG_M16 */
> + if (error_pc & 1) {
> + if (!(env->hflags & MIPS_HFLAG_DM)) {
> + env->CP0_BadVAddr = error_pc;
> + }
> + env->active_tc.PC = error_pc;
> + do_raise_exception(env, EXCP_AdEL, 0);
> + }
> return;
Why does this need to be done here, when it is also done in translate.c?
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 32/40] elf: Add nanoMIPS specific variations in ELF header fields
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 32/40] elf: Add nanoMIPS specific variations in ELF header fields Stefan Markovic
@ 2018-07-23 16:59 ` Richard Henderson
2018-07-23 17:39 ` Aleksandar Markovic
0 siblings, 1 reply; 89+ messages in thread
From: Richard Henderson @ 2018-07-23 16:59 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:55 AM, Stefan Markovic wrote:
> From: Aleksandar Markovic <amarkovic@wavecomp.com>
>
> Add nanoMIPS-related values in ELF header fields as specified in
> nanoMIPS' "ELF ABI Supplement".
>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> ---
> include/elf.h | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
None of these values have made it upstream to binutils yet,
so I can't double-check them. However,
Acked-by: Richard Henderson <richard.henderson@linaro.org>
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 33/40] elf: Relax MIPS' elf_check_arch() to accept EM_NANOMIPS too
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 33/40] elf: Relax MIPS' elf_check_arch() to accept EM_NANOMIPS too Stefan Markovic
@ 2018-07-23 17:01 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-23 17:01 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:55 AM, Stefan Markovic wrote:
> From: Aleksandar Markovic <amarkovic@wavecomp.com>
>
> Starting from nanoMIPS introduction, machine variant can be
> EM_MIPS or EM_NANOMIPS.
>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> ---
> linux-user/elfload.c | 2 ++
> 1 file changed, 2 insertions(+)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 34/40] linux-user: Don't check FCR31_NAN2008 bit for nanoMIPS
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 34/40] linux-user: Don't check FCR31_NAN2008 bit for nanoMIPS Stefan Markovic
@ 2018-07-23 17:02 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-23 17:02 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:55 AM, Stefan Markovic wrote:
> From: Aleksandar Markovic <amarkovic@wavecomp.com>
>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> ---
> linux-user/mips/cpu_loop.c | 3 +++
> 1 file changed, 3 insertions(+)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 38/40] gdbstub: Disable handling of nanoMIPS ISA bit in the MIPS gdbstub
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 38/40] gdbstub: Disable handling of nanoMIPS ISA bit in the MIPS gdbstub Stefan Markovic
@ 2018-07-23 17:03 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-23 17:03 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:55 AM, Stefan Markovic wrote:
> From: James Hogan <james.hogan@mips.com>
>
> nanoMIPS has no ISA bit in the PC, so remove the handling of the low bit
> of the PC in the MIPS gdbstub for nanoMIPS. This prevents the PC being
> read as e.g. 0xbfc00001, and prevents writing to the PC clearing
> MIPS_HFLAG_M16.
>
> Signed-off-by: James Hogan <james.hogan@mips.com>
> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> ---
> target/mips/gdbstub.c | 13 ++++++++-----
> 1 file changed, 8 insertions(+), 5 deletions(-)
See my comments for 28/40.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 40/40] target/mips: Add definition of nanoMIPS I7200 CPU
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 40/40] target/mips: Add definition of nanoMIPS I7200 CPU Stefan Markovic
@ 2018-07-23 17:05 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-23 17:05 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
amarkovic, smarkovic, pjovanovic, pburton
On 07/19/2018 05:55 AM, Stefan Markovic wrote:
> + .insn_flags = CPU_NANOMIPS32 | ASE_MICROMIPS | ASE_DSP | ASE_DSPR2 |
> + ASE_MT,
See my comments for 27/40.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 23/40] target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair
2018-07-21 18:15 ` Richard Henderson
@ 2018-07-23 17:21 ` Aleksandar Markovic
2018-07-27 15:29 ` Aleksandar Markovic
1 sibling, 0 replies; 89+ messages in thread
From: Aleksandar Markovic @ 2018-07-23 17:21 UTC (permalink / raw)
To: Richard Henderson, Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
Stefan Markovic, Petar Jovanovic, Paul Burton
> From: Richard Henderson <richard.henderson@linaro.org>
> Sent: Saturday, July 21, 2018 8:15 PM
> On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> > From: Yongbok Kim <yongbok.kim@mips.com>
> >
> > Implement nanoMIPS LLWP and SCWP instruction pair.
> >
> > Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
> > Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> > Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> > ---
> > linux-user/mips/cpu_loop.c | 25 ++++++++---
> > target/mips/cpu.h | 2 +
> > target/mips/helper.h | 2 +
> > target/mips/op_helper.c | 35 +++++++++++++++
> > target/mips/translate.c | 107 +++++++++++++++++++++++++++++++++++++++++++++
> > 5 files changed, 166 insertions(+), 5 deletions(-)
>
> Hmm. Well, it's ok as far as it goes, but I'd really really like to see
> target/mips to be updated to use actual atomic operations. Otherwise
> mips*-linux-user will never be reliable and mips*-softmmu cannot run SMP in
> multi-threaded mode.
>
> While converting the rest of target/mips to atomic operations is perhaps out of
> scope for this patch set, there's really no reason not to do these two
> instructions correctly from the start. It'll save the trouble of rewriting
> them from scratch later.
>
> Please see target/arm/translate.c, gen_load_exclusive and gen_store_exclusive,
> for the size == 3 case. That is arm32 doing a 64-bit "paired" atomic
> operation, just like you are attempting here.
>
> Note that single-copy atomic semantics apply in both cases, so LLWP must
> perform one 64-bit load, not two 32-bit loads. The store in SCWP must happen
> with a 64-bit atomic cmpxchg operation.
>
>
> r~
Hi, Richard.
The improved version of this patch, that addresses the concerns you mentioned, may be included in the next version of this series, which is scheduled to be sent in next few days.
The reason we are a little sluggish with response to your reviews is that we are still completing functionality (mostly linux-user-related). However, we'll focus on the interaction with reviewers as soon as we are out of that phase.
Regards,
Aleksandar
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 32/40] elf: Add nanoMIPS specific variations in ELF header fields
2018-07-23 16:59 ` Richard Henderson
@ 2018-07-23 17:39 ` Aleksandar Markovic
2018-07-23 17:43 ` Aleksandar Markovic
0 siblings, 1 reply; 89+ messages in thread
From: Aleksandar Markovic @ 2018-07-23 17:39 UTC (permalink / raw)
To: Richard Henderson, Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
Stefan Markovic, Petar Jovanovic, Paul Burton
> From: Richard Henderson <richard.henderson@linaro.org>
> Sent: Monday, July 23, 2018 6:59 PM
> On 07/19/2018 05:55 AM, Stefan Markovic wrote:
> > From: Aleksandar Markovic <amarkovic@wavecomp.com>
> >
> > Add nanoMIPS-related values in ELF header fields as specified in
> > nanoMIPS' "ELF ABI Supplement".
> >
> > Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> > Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> > ---
> > include/elf.h | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
>
> None of these values have made it upstream to binutils yet,
> so I can't double-check them. However,
>
> Acked-by: Richard Henderson <richard.henderson@linaro.org>
>
>
> r~
Hi, Richard.
True, binutils headers were not updated with these ELF-related values. However, there is a publicly-available document at https://codescape.mips.com/components/toolchain/nanomips/2018.04-02/releasenotes.html that should be the source of information for binutils headers, or any other related header in similar tools. Specifically, see Section 5.1 of that document.
Regards,
Aleksandar
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 32/40] elf: Add nanoMIPS specific variations in ELF header fields
2018-07-23 17:39 ` Aleksandar Markovic
@ 2018-07-23 17:43 ` Aleksandar Markovic
0 siblings, 0 replies; 89+ messages in thread
From: Aleksandar Markovic @ 2018-07-23 17:43 UTC (permalink / raw)
To: Richard Henderson, Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
Stefan Markovic, Petar Jovanovic, Paul Burton
> From: Aleksandar Markovic
> Sent: Monday, July 23, 2018 7:39 PM
>
> > From: Richard Henderson <richard.henderson@linaro.org>
> > Sent: Monday, July 23, 2018 6:59 PM
> > On 07/19/2018 05:55 AM, Stefan Markovic wrote:
> > > From: Aleksandar Markovic <amarkovic@wavecomp.com>
> > >
> > > Add nanoMIPS-related values in ELF header fields as specified in
> > > nanoMIPS' "ELF ABI Supplement".
> > >
> > > Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> > > Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> > > ---
> > > include/elf.h | 20 ++++++++++++++++++++
> > > 1 file changed, 20 insertions(+)
> >
> > None of these values have made it upstream to binutils yet,
> > so I can't double-check them. However,
> >
> > Acked-by: Richard Henderson <richard.henderson@linaro.org>
> >
> >
> > r~
>
> Hi, Richard.
>
> True, binutils headers were not updated with these ELF-related values. However, there is a publicly-available > document at https://codescape.mips.com/components/toolchain/nanomips/2018.04-02/releasenotes.html that should be > the source of information for binutils headers, or any other related header in similar tools. Specifically, see > Section 5.1 of that document.
>
> Regards,
> Aleksandar
I meant to link here to "nanoMIPS ABI Supplement":
https://codescape.mips.com/components/toolchain/nanomips/2018.04-02/docs/MIPS_nanoMIPS_ABI_supplement_01_02_DN00179.pdf
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 24/40] target/mips: Add updating BadInstr and BadInstrP registers for nanoMIPS
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 24/40] target/mips: Add updating BadInstr and BadInstrP registers for nanoMIPS Stefan Markovic
2018-07-23 16:36 ` Richard Henderson
@ 2018-07-24 10:47 ` Aleksandar Markovic
1 sibling, 0 replies; 89+ messages in thread
From: Aleksandar Markovic @ 2018-07-24 10:47 UTC (permalink / raw)
To: Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
richard.henderson, Stefan Markovic, Petar Jovanovic, Paul Burton
> From: Stefan Markovic <stefan.markovic@rt-rk.com>
> Sent: Thursday, July 19, 2018 2:54 PM
> Subject: [PATCH v3 24/40] target/mips: Add updating BadInstr and BadInstrP registers for nanoMIPS
>
> From: Yongbok Kim <yongbok.kim@mips.com>
>
> Updating BadInstr and BadInstrP registers was addded for nanoMIPS.
> BadInstr and BadInstrP support for pre-nanoMIPS remains
> unimplemented.
>
> Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> ---
> target/mips/helper.c | 23 ++++++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/target/mips/helper.c b/target/mips/helper.c
> index e215af9..5299f21 100644
> --- a/target/mips/helper.c
> +++ b/target/mips/helper.c
> @@ -683,7 +683,28 @@ static void set_hflags_for_handler (CPUMIPSState *env)
> static inline void set_badinstr_registers(CPUMIPSState *env)
> {
> if (env->hflags & MIPS_HFLAG_M16) {
> - /* TODO: add BadInstr support for microMIPS */
> + uint32_t instr;
> + if (!(env->insn_flags & ISA_NANOMIPS32)) {
> + /* TODO: add BadInstr support for pre-nanoMIPS */
> + return;
> + }
> + if (env->CP0_Config3 & (1 << CP0C3_BI)) {
> + instr = (cpu_lduw_code(env, env->active_tc.PC)) << 16;
> + if ((env->insn_flags & ISA_NANOMIPS32) &&
> + ((instr & 0x10000000) == 0)) {
> + instr |= cpu_lduw_code(env, env->active_tc.PC + 2);
> + }
> + env->CP0_BadInstr = instr;
> + }
> + if ((env->CP0_Config3 & (1 << CP0C3_BP)) &&
> + (env->hflags & MIPS_HFLAG_BMASK)) {
> + if (!(env->hflags & MIPS_HFLAG_B16)) {
> + env->CP0_BadInstrP = cpu_ldl_code(env, env->active_tc.PC - 4);
> + } else {
> + env->CP0_BadInstrP =
> + (cpu_lduw_code(env, env->active_tc.PC - 2)) << 16;
> + }
> + }
> return;
> }
> if (env->CP0_Config3 & (1 << CP0C3_BI)) {
> --
> 2.7.4
This new block should be placed before MIPS_HFLAG_M16 check. The whole patch should be merged with the succeeding patch, as noted in other reviews.
Aleksandar
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 04/40] target/mips: Add decode_nanomips_opc() function
2018-07-19 16:39 ` Richard Henderson
@ 2018-07-24 10:56 ` Aleksandar Markovic
0 siblings, 0 replies; 89+ messages in thread
From: Aleksandar Markovic @ 2018-07-24 10:56 UTC (permalink / raw)
To: Richard Henderson, Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
Stefan Markovic, Petar Jovanovic, Paul Burton
> From: Richard Henderson <richard.henderson@linaro.org>
> Sent: Thursday, July 19, 2018 6:39 PM
> On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> > decode_opc(env, ctx);
> > } else if (ctx->insn_flags & ASE_MICROMIPS) {
> > - ctx->opcode = cpu_lduw_code(env, ctx->base.pc_next);
> > - insn_bytes = decode_micromips_opc(env, ctx);
> > + if (env->insn_flags & ISA_NANOMIPS32) {
>
> Be consistent and use ctx->insn_flags.
>
> > + ctx->opcode = cpu_lduw_code(env, ctx->base.pc_next);
> > + insn_bytes = decode_nanomips_opc(env, ctx);
> > + } else {
> > + ctx->opcode = cpu_lduw_code(env, ctx->base.pc_next);
> > + insn_bytes = decode_micromips_opc(env, ctx);
> > + }
> > } else if (ctx->insn_flags & ASE_MIPS16) {
> > ctx->opcode = cpu_lduw_code(env, ctx->base.pc_next);
>
> Do you really want to nest nanoMIPS within microMIPS?
>
> I would have thought a better structure was
>
> } else if (ctx->insn_flags & ISA_NANOMIPS32) {
> ...
> } else if (ctx->insn_flags & ASE_MICROMIPS) {
> ...
> } else if (ctx->insn_flags & ASE_MIPS16) {
>
>
> r~
Hi, Richard,
This will be fixed in the way you described in v4.
Aleksandar
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 05/40] target/mips: Add nanoMIPS decoding and extraction utilities
2018-07-19 16:57 ` Richard Henderson
@ 2018-07-24 11:00 ` Aleksandar Markovic
0 siblings, 0 replies; 89+ messages in thread
From: Aleksandar Markovic @ 2018-07-24 11:00 UTC (permalink / raw)
To: Richard Henderson, Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
Stefan Markovic, Petar Jovanovic, Paul Burton
> From: Richard Henderson <richard.henderson@linaro.org>
> Sent: Thursday, July 19, 2018 6:57 PM
>
> I think it's worth spending one line to document the pseudocode function from
> which each of these come. E.g.
>
> /* Implement nanoMIPS pseudocode decode_gpr(encoded_gpr, 'gpr4.zero'). */
>
> Which is certainly more accurate than the comment that is there currently.
>
> Otherwise,
> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
>
>
> r~
Hello, Richard
The comments will be fixed in v4. Also, the fourth decode_gpr_XXX function will be moved to this patch (from one of remaining patches with decoding logic). These functions will be all marked inline. This also means that the compiler will not complain about "unused functions".
Aleksandar
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 13/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32a0)
2018-07-19 19:08 ` Richard Henderson
@ 2018-07-25 15:38 ` Aleksandar Markovic
2018-07-25 19:07 ` Richard Henderson
0 siblings, 1 reply; 89+ messages in thread
From: Aleksandar Markovic @ 2018-07-25 15:38 UTC (permalink / raw)
To: Richard Henderson, Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
Stefan Markovic, Petar Jovanovic, Paul Burton
Hi, Richard.
> > + case NM_SOV:
> > + {
> > + TCGv t0 = tcg_temp_local_new();
> > + TCGv t1 = tcg_temp_new();
> > + TCGv t2 = tcg_temp_new();
> > + TCGLabel *l1 = gen_new_label();
> > +
> > + gen_load_gpr(t1, rs);
> > + gen_load_gpr(t2, rt);
> > + tcg_gen_add_tl(t0, t1, t2);
> > + tcg_gen_ext32s_tl(t0, t0);
> > + tcg_gen_xor_tl(t1, t1, t2);
> > + tcg_gen_xor_tl(t2, t0, t2);
> > + tcg_gen_andc_tl(t1, t2, t1);
> > +
> > + tcg_gen_movi_tl(t0, 0);
> > + tcg_gen_brcondi_tl(TCG_COND_GE, t1, 0, l1);
>
> tcg_gen_setcondi_tl.
>
Would here the correct simplification be:
Replace code segment
tcg_gen_movi_tl(t0, 0);
tcg_gen_brcondi_tl(TCG_COND_GE, t1, 0, l1);
tcg_gen_movi_tl(t0, 1);
gen_set_label(l1);
with
tcg_gen_setcondi_tl(TCG_COND_GE, t0, t1, 0);
(plus deleting the declaration of l1 of course)
Regards,
Aleksandar M.
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 18/40] target/mips: Add emulation of nanoMIPS 32-bit load and store instructions
2018-07-20 4:59 ` Richard Henderson
@ 2018-07-25 15:46 ` Aleksandar Markovic
2018-07-25 19:18 ` Richard Henderson
2018-07-25 19:32 ` Peter Maydell
1 sibling, 1 reply; 89+ messages in thread
From: Aleksandar Markovic @ 2018-07-25 15:46 UTC (permalink / raw)
To: Richard Henderson, Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
Stefan Markovic, Petar Jovanovic, Paul Burton
Hello, Richard. Sorry for bothering you. One more question.
> On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> > + case NM_ADDIUGP_B:
> > + gen_arith_imm(ctx, OPC_ADDIU, rt, 28, u);
> > + break;
>
> Use gen_op_addr_add, since behaves_like('DADDIU[GP.B]').
Did you perhaps mean an implementation similar to this would be appropriate:
case NM_ADDIUGP_B:
if (rt != 0) {
uint32_t offset = extract32(ctx->opcode, 0, 18);
if (offset == 0) {
gen_load_gpr(cpu_gpr[rt], 28);
} else {
TCGv t0;
t0 = tcg_temp_new();
tcg_gen_movi_tl(t0, offset);
gen_op_addr_add(ctx, cpu_gpr[rt], cpu_gpr[28], t0);
tcg_temp_free(t0);
}
}
break;
(this is like NM_ADDIUGP_W implementation)
Aleksandar M.
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 13/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32a0)
2018-07-25 15:38 ` Aleksandar Markovic
@ 2018-07-25 19:07 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-25 19:07 UTC (permalink / raw)
To: Aleksandar Markovic, Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
Stefan Markovic, Petar Jovanovic, Paul Burton
On 07/25/2018 08:38 AM, Aleksandar Markovic wrote:
> Hi, Richard.
>
>>> + case NM_SOV:
>>> + {
>>> + TCGv t0 = tcg_temp_local_new();
>>> + TCGv t1 = tcg_temp_new();
>>> + TCGv t2 = tcg_temp_new();
>>> + TCGLabel *l1 = gen_new_label();
>>> +
>>> + gen_load_gpr(t1, rs);
>>> + gen_load_gpr(t2, rt);
>>> + tcg_gen_add_tl(t0, t1, t2);
>>> + tcg_gen_ext32s_tl(t0, t0);
>>> + tcg_gen_xor_tl(t1, t1, t2);
>>> + tcg_gen_xor_tl(t2, t0, t2);
>>> + tcg_gen_andc_tl(t1, t2, t1);
>>> +
>>> + tcg_gen_movi_tl(t0, 0);
>>> + tcg_gen_brcondi_tl(TCG_COND_GE, t1, 0, l1);
>>
>> tcg_gen_setcondi_tl.
>>
>
> Would here the correct simplification be:
>
> Replace code segment
>
> tcg_gen_movi_tl(t0, 0);
> tcg_gen_brcondi_tl(TCG_COND_GE, t1, 0, l1);
> tcg_gen_movi_tl(t0, 1);
> gen_set_label(l1);
>
> with
>
> tcg_gen_setcondi_tl(TCG_COND_GE, t0, t1, 0);
> (plus deleting the declaration of l1 of course)
Nearly. You're branching over a move of 1, and so computing the inverse of the
condition. So the correct replacement is
tcg_gen_setcondi_tl(TCG_COND_LT, t0, t1, 0);
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 18/40] target/mips: Add emulation of nanoMIPS 32-bit load and store instructions
2018-07-25 15:46 ` Aleksandar Markovic
@ 2018-07-25 19:18 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-25 19:18 UTC (permalink / raw)
To: Aleksandar Markovic, Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
Stefan Markovic, Petar Jovanovic, Paul Burton
On 07/25/2018 08:46 AM, Aleksandar Markovic wrote:
> Hello, Richard. Sorry for bothering you. One more question.
>
>> On 07/19/2018 05:54 AM, Stefan Markovic wrote:
>>> + case NM_ADDIUGP_B:
>>> + gen_arith_imm(ctx, OPC_ADDIU, rt, 28, u);
>>> + break;
>>
>> Use gen_op_addr_add, since behaves_like('DADDIU[GP.B]').
>
> Did you perhaps mean an implementation similar to this would be appropriate:
>
> case NM_ADDIUGP_B:
> if (rt != 0) {
> uint32_t offset = extract32(ctx->opcode, 0, 18);
> if (offset == 0) {
> gen_load_gpr(cpu_gpr[rt], 28);
> } else {
> TCGv t0;
> t0 = tcg_temp_new();
> tcg_gen_movi_tl(t0, offset);
> gen_op_addr_add(ctx, cpu_gpr[rt], cpu_gpr[28], t0);
> tcg_temp_free(t0);
> }
> }
> break;
>
> (this is like NM_ADDIUGP_W implementation)
I have suggested in the past (during v1 or v2 review?) creating
static void gen_op_addr_addi(DisasContext *ctx, TCGv ret, TCGv base,
target_long ofs)
{
tcg_gen_addi_tl(ret, base, ofs);
#ifdef TARGET_MIPS64
if (ctx->hflags & MIPS_HFLAG_AWRAP) {
tcg_gen_ext32s_i64(ret, ret);
}
#endif
}
so that
(1) You need not locally maintain the tcg temporary for offset
at each such instance,
(2) The special case for offset == 0 is handled automatically
within tcg_gen_addi_tl.
(3) You do not forget, as you just did here, that the extension
for AWRAP must happen even for offset == 0.
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 18/40] target/mips: Add emulation of nanoMIPS 32-bit load and store instructions
2018-07-20 4:59 ` Richard Henderson
2018-07-25 15:46 ` Aleksandar Markovic
@ 2018-07-25 19:32 ` Peter Maydell
1 sibling, 0 replies; 89+ messages in thread
From: Peter Maydell @ 2018-07-25 19:32 UTC (permalink / raw)
To: Richard Henderson
Cc: Stefan Markovic, QEMU Developers, Paul Burton, Stefan Markovic,
Riku Voipio, Laurent Vivier, Philippe Mathieu-Daudé,
Aleksandar Markovic, Petar Jovanovic, Aurelien Jarno
On 20 July 2018 at 05:59, Richard Henderson
<richard.henderson@linaro.org> wrote:
> On 07/19/2018 05:54 AM, Stefan Markovic wrote:
>> + /* SYNCI */
>> + /* Break the TB to be able to sync copied instructions
>> + immediately */
>> + ctx->base.is_jmp = DISAS_STOP;
>
> I'll note for future cleanup that while this matches all of the other instances
> of SYNCI in target/mips/, this is not actually required.
>
> QEMU supports self-modifying code without any barriers or breaks whatsoever.
> (Becuase, of course, i386 as a guest requires this.)
This is true, but only if the target/ code defines
TARGET_HAS_PRECISE_SMC (which at the moment only target/i386
does), which enables some complicated code that spots
when the current TB is being modified. Most of our
other targets only support self-modifying code which
has some kind of barrier insn, and break the TB at
the barrier. (Compare Arm's handling of "isb", though
there there is also an architectural requirement to take
any pending interrupts at the barrier; I don't know if
MIPS has any similar interrupt related semantics for
their SYNCI.)
thanks
-- PMM
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 23/40] target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair
2018-07-21 18:15 ` Richard Henderson
2018-07-23 17:21 ` Aleksandar Markovic
@ 2018-07-27 15:29 ` Aleksandar Markovic
2018-07-27 15:50 ` Richard Henderson
1 sibling, 1 reply; 89+ messages in thread
From: Aleksandar Markovic @ 2018-07-27 15:29 UTC (permalink / raw)
To: Richard Henderson, Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
Stefan Markovic, Petar Jovanovic, Paul Burton
Hi, Richard.
> From: Richard Henderson <richard.henderson@linaro.org>
> Sent: Saturday, July 21, 2018 8:15 PM
>
> On 07/19/2018 05:54 AM, Stefan Markovic wrote:
> > From: Yongbok Kim <yongbok.kim@mips.com>
> >
> > Implement nanoMIPS LLWP and SCWP instruction pair.
> >
> > Signed-off-by: Yongbok Kim <yongbok.kim@mips.com>
> > Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
> > Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
> > ---
> > linux-user/mips/cpu_loop.c | 25 ++++++++---
> > target/mips/cpu.h | 2 +
> > target/mips/helper.h | 2 +
> > target/mips/op_helper.c | 35 +++++++++++++++
> > target/mips/translate.c | 107 +++++++++++++++++++++++++++++++++++++++++++++
> > 5 files changed, 166 insertions(+), 5 deletions(-)
>
> Hmm. Well, it's ok as far as it goes, but I'd really really like to see
> target/mips to be updated to use actual atomic operations. Otherwise
> mips*-linux-user will never be reliable and mips*-softmmu cannot run SMP in
> multi-threaded mode.
>
> While converting the rest of target/mips to atomic operations is perhaps out of
> scope for this patch set, there's really no reason not to do these two
> instructions correctly from the start. It'll save the trouble of rewriting
> them from scratch later.
>
> Please see target/arm/translate.c, gen_load_exclusive and gen_store_exclusive,
> for the size == 3 case. That is arm32 doing a 64-bit "paired" atomic
> operation, just like you are attempting here.
>
> Note that single-copy atomic semantics apply in both cases, so LLWP must
> perform one 64-bit load, not two 32-bit loads. The store in SCWP must happen
> with a 64-bit atomic cmpxchg operation.
This is our work-in-progress version:
(does it look better?)
static void gen_llwp(DisasContext *ctx, uint32_t base, int16_t offset,
uint32_t reg1, uint32_t reg2)
{
TCGv taddr = tcg_temp_new();
TCGv_i64 tval = tcg_temp_new_i64();
TCGv tmp1 = tcg_temp_new();
TCGv tmp2 = tcg_temp_new();
TCGv tmp3 = tcg_temp_new();
TCGLabel *l1 = gen_new_label();
gen_base_offset_addr(ctx, taddr, base, offset);
tcg_gen_andi_tl(tmp3, taddr, 0x7);
tcg_gen_brcondi_tl(TCG_COND_EQ, tmp3, 0, l1);
tcg_temp_free(tmp3);
tcg_gen_st_tl(taddr, cpu_env, offsetof(CPUMIPSState, CP0_BadVAddr));
generate_exception(ctx, EXCP_AdES);
gen_set_label(l1);
tcg_gen_qemu_ld64(tval, taddr, ctx->mem_idx);
tcg_gen_extr_i64_tl(tmp1, tmp2, tval);
gen_store_gpr(tmp1, reg1);
tcg_temp_free(tmp1);
gen_store_gpr(tmp2, reg2);
tcg_temp_free(tmp2);
tcg_gen_st_i64(tval, cpu_env, offsetof(CPUMIPSState, llval_wp));
tcg_temp_free_i64(tval);
tcg_gen_st_tl(taddr, cpu_env, offsetof(CPUMIPSState, lladdr));
tcg_temp_free(taddr);
}
static void gen_scwp(DisasContext *ctx, uint32_t base, int16_t offset,
uint32_t reg1, uint32_t reg2)
{
TCGv taddr = tcg_temp_new();
TCGv lladdr = tcg_temp_new();
TCGv_i64 tval = tcg_temp_new_i64();
TCGv_i64 llval = tcg_temp_new_i64();
TCGv_i64 val = tcg_temp_new_i64();
TCGv tmp1 = tcg_temp_new();
TCGv tmp2 = tcg_temp_new();
TCGLabel *l1 = gen_new_label();
TCGLabel *lab_fail = gen_new_label();
TCGLabel *lab_done = gen_new_label();
gen_base_offset_addr(ctx, taddr, base, offset);
tcg_gen_andi_tl(tmp1, taddr, 0x7);
tcg_gen_brcondi_tl(TCG_COND_EQ, tmp1, 0, l1);
tcg_gen_st_tl(taddr, cpu_env, offsetof(CPUMIPSState, CP0_BadVAddr));
generate_exception(ctx, EXCP_AdES);
gen_set_label(l1);
tcg_gen_ld_tl(lladdr, cpu_env, offsetof(CPUMIPSState, lladdr));
tcg_gen_brcond_tl(TCG_COND_NE, taddr, lladdr, lab_fail);
gen_load_gpr(tmp1, reg1);
gen_load_gpr(tmp2, reg2);
tcg_gen_concat_tl_i64(tval, tmp1, tmp2);
tcg_gen_ld_i64(llval, cpu_env, offsetof(CPUMIPSState, llval_wp));
tcg_gen_atomic_cmpxchg_i64(val, taddr, llval, tval,
ctx->mem_idx, MO_64);
tcg_gen_setcond_i64(TCG_COND_EQ, val, val, llval);
tcg_gen_br(lab_done);
gen_set_label(lab_fail);
tcg_gen_movi_tl(cpu_gpr[reg2], 0);
gen_set_label(lab_done);
tcg_gen_movi_tl(lladdr, -1);
tcg_gen_st_tl(lladdr, cpu_env, offsetof(CPUMIPSState, lladdr));
}
^ permalink raw reply [flat|nested] 89+ messages in thread
* Re: [Qemu-devel] [PATCH v3 23/40] target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair
2018-07-27 15:29 ` Aleksandar Markovic
@ 2018-07-27 15:50 ` Richard Henderson
0 siblings, 0 replies; 89+ messages in thread
From: Richard Henderson @ 2018-07-27 15:50 UTC (permalink / raw)
To: Aleksandar Markovic, Stefan Markovic, qemu-devel
Cc: laurent, riku.voipio, philippe.mathieu.daude, aurelien,
Stefan Markovic, Petar Jovanovic, Paul Burton
On 07/27/2018 08:29 AM, Aleksandar Markovic wrote:
> static void gen_llwp(DisasContext *ctx, uint32_t base, int16_t offset,
> uint32_t reg1, uint32_t reg2)
> {
> TCGv taddr = tcg_temp_new();
> TCGv_i64 tval = tcg_temp_new_i64();
> TCGv tmp1 = tcg_temp_new();
> TCGv tmp2 = tcg_temp_new();
> TCGv tmp3 = tcg_temp_new();
> TCGLabel *l1 = gen_new_label();
>
> gen_base_offset_addr(ctx, taddr, base, offset);
> tcg_gen_andi_tl(tmp3, taddr, 0x7);
> tcg_gen_brcondi_tl(TCG_COND_EQ, tmp3, 0, l1);
> tcg_temp_free(tmp3);
> tcg_gen_st_tl(taddr, cpu_env, offsetof(CPUMIPSState, CP0_BadVAddr));
> generate_exception(ctx, EXCP_AdES);
> gen_set_label(l1);
You shouldn't need this, as it is implied by
cpu.h:#define ALIGNED_ONLY
and will, for softmmu anyway, fault
> tcg_gen_qemu_ld64(tval, taddr, ctx->mem_idx);
here.
(If you are testing -linux-user, there are many other missing
alignment faults and I suggest you ignore the issue entirely; it needs to be
dealt with generically.)
> tcg_gen_extr_i64_tl(tmp1, tmp2, tval);
> gen_store_gpr(tmp1, reg1);
> tcg_temp_free(tmp1);
> gen_store_gpr(tmp2, reg2);
> tcg_temp_free(tmp2);
Has the swap of register numbers for big vs little-endian happened in the
caller? You didn't show enough context to tell.
> static void gen_scwp(DisasContext *ctx, uint32_t base, int16_t offset,
> uint32_t reg1, uint32_t reg2)
> {
> TCGv taddr = tcg_temp_new();
> TCGv lladdr = tcg_temp_new();
> TCGv_i64 tval = tcg_temp_new_i64();
> TCGv_i64 llval = tcg_temp_new_i64();
> TCGv_i64 val = tcg_temp_new_i64();
> TCGv tmp1 = tcg_temp_new();
> TCGv tmp2 = tcg_temp_new();
> TCGLabel *l1 = gen_new_label();
> TCGLabel *lab_fail = gen_new_label();
> TCGLabel *lab_done = gen_new_label();
>
> gen_base_offset_addr(ctx, taddr, base, offset);
> tcg_gen_andi_tl(tmp1, taddr, 0x7);
> tcg_gen_brcondi_tl(TCG_COND_EQ, tmp1, 0, l1);
> tcg_gen_st_tl(taddr, cpu_env, offsetof(CPUMIPSState, CP0_BadVAddr));
> generate_exception(ctx, EXCP_AdES);
>
> gen_set_label(l1);
Hmm. You could perhaps move the alignment test to the lab_fail path, because
> tcg_gen_ld_tl(lladdr, cpu_env, offsetof(CPUMIPSState, lladdr));
> tcg_gen_brcond_tl(TCG_COND_NE, taddr, lladdr, lab_fail);
if we pass this test we know that taddr == lladdr, and that lladdr is aligned
because the load for LLWP did not fault. Even if that were not the case, the
cmpxchg itself would trigger an alignment fault.
> gen_load_gpr(tmp1, reg1);
> gen_load_gpr(tmp2, reg2);
> tcg_gen_concat_tl_i64(tval, tmp1, tmp2);
Again, did a the reg1/reg2 swap happen in the caller?
> tcg_gen_ld_i64(llval, cpu_env, offsetof(CPUMIPSState, llval_wp));
> tcg_gen_atomic_cmpxchg_i64(val, taddr, llval, tval,
> ctx->mem_idx, MO_64);
> tcg_gen_setcond_i64(TCG_COND_EQ, val, val, llval);
> tcg_gen_br(lab_done);
You failed to write back "val" to GPR[rt].
>
> gen_set_label(lab_fail);
> tcg_gen_movi_tl(cpu_gpr[reg2], 0);
>
> gen_set_label(lab_done);
> tcg_gen_movi_tl(lladdr, -1);
> tcg_gen_st_tl(lladdr, cpu_env, offsetof(CPUMIPSState, lladdr));
> }
>
r~
^ permalink raw reply [flat|nested] 89+ messages in thread
end of thread, other threads:[~2018-07-27 15:50 UTC | newest]
Thread overview: 89+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-07-19 12:54 [Qemu-devel] [PATCH v3 00/40] Add nanoMIPS support to QEMU Stefan Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 01/40] target/mips: Add preprocessor constants for nanoMIPS Stefan Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 02/40] target/mips: Add nanoMIPS base instruction set opcodes Stefan Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 03/40] target/mips: Add nanoMIPS DSP ASE opcodes Stefan Markovic
2018-07-19 16:28 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 04/40] target/mips: Add decode_nanomips_opc() function Stefan Markovic
2018-07-19 16:39 ` Richard Henderson
2018-07-24 10:56 ` Aleksandar Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 05/40] target/mips: Add nanoMIPS decoding and extraction utilities Stefan Markovic
2018-07-19 16:57 ` Richard Henderson
2018-07-24 11:00 ` Aleksandar Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 06/40] target/mips: Add emulation of misc nanoMIPS 16-bit instructions Stefan Markovic
2018-07-19 18:06 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 07/40] target/mips: Add emulation of nanoMIPS 16-bit load and store instructions Stefan Markovic
2018-07-19 18:28 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 08/40] target/mips: Add emulation of nanoMIPS 16-bit logic instructions Stefan Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 09/40] target/mips: Add emulation of nanoMIPS 16-bit save and restore instructions Stefan Markovic
2018-07-19 18:34 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 10/40] target/mips: Add emulation of some common nanoMIPS 32-bit instructions Stefan Markovic
2018-07-19 18:52 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 11/40] target/mips: Add emulation of nanoMIPS 48-bit instructions Stefan Markovic
2018-07-19 19:01 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 12/40] target/mips: Add emulation of nanoMIPS FP instructions Stefan Markovic
2018-07-19 19:03 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 13/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32a0) Stefan Markovic
2018-07-19 19:08 ` Richard Henderson
2018-07-25 15:38 ` Aleksandar Markovic
2018-07-25 19:07 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 14/40] target/mips: Add emulation of misc nanoMIPS instructions (pool32axf) Stefan Markovic
2018-07-19 19:13 ` Richard Henderson
2018-07-20 16:15 ` Aleksandar Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 15/40] target/mips: Add emulation of misc nanoMIPS instructions (pool p_lsx) Stefan Markovic
2018-07-19 19:19 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 16/40] target/mips: Implement emulation of nanoMIPS ROTX instruction Stefan Markovic
2018-07-19 19:19 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 17/40] target/mips: Implement emulation of nanoMIPS EXTW instruction Stefan Markovic
2018-07-19 20:59 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 18/40] target/mips: Add emulation of nanoMIPS 32-bit load and store instructions Stefan Markovic
2018-07-20 4:59 ` Richard Henderson
2018-07-25 15:46 ` Aleksandar Markovic
2018-07-25 19:18 ` Richard Henderson
2018-07-25 19:32 ` Peter Maydell
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 19/40] target/mips: Add emulation of nanoMIPS branch instructions Stefan Markovic
2018-07-20 5:28 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 20/40] target/mips: Implement MT ASE support for nanoMIPS Stefan Markovic
2018-07-21 15:19 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 21/40] target/mips: Implement DSP " Stefan Markovic
2018-07-21 15:52 ` Richard Henderson
2018-07-21 18:04 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 22/40] target/mips: Add handling of branch delay slots " Stefan Markovic
2018-07-21 18:03 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 23/40] target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair Stefan Markovic
2018-07-21 18:15 ` Richard Henderson
2018-07-23 17:21 ` Aleksandar Markovic
2018-07-27 15:29 ` Aleksandar Markovic
2018-07-27 15:50 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 24/40] target/mips: Add updating BadInstr and BadInstrP registers for nanoMIPS Stefan Markovic
2018-07-23 16:36 ` Richard Henderson
2018-07-24 10:47 ` Aleksandar Markovic
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 25/40] target/mips: Add updating CP0 BadInstrX register for nanoMIPs only Stefan Markovic
2018-07-23 16:35 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 26/40] target/mips: Implement CP0 Config0.WR bit functionality Stefan Markovic
2018-07-23 16:46 ` Richard Henderson
2018-07-19 12:54 ` [Qemu-devel] [PATCH v3 27/40] target/mips: Adjust behavior of Config3's ISAOnExc bit for nanoMIPS Stefan Markovic
2018-07-23 16:48 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 28/40] target/mips: Adjust exception_resume_pc() " Stefan Markovic
2018-07-23 16:54 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 29/40] target/mips: Adjust set_hflags_for_handler() " Stefan Markovic
2018-07-23 16:54 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 30/40] target/mips: Adjust set_pc() " Stefan Markovic
2018-07-23 16:55 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 31/40] target/mips: Fix ERET/ERETNC behavior related to ADEL exception Stefan Markovic
2018-07-23 16:56 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 32/40] elf: Add nanoMIPS specific variations in ELF header fields Stefan Markovic
2018-07-23 16:59 ` Richard Henderson
2018-07-23 17:39 ` Aleksandar Markovic
2018-07-23 17:43 ` Aleksandar Markovic
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 33/40] elf: Relax MIPS' elf_check_arch() to accept EM_NANOMIPS too Stefan Markovic
2018-07-23 17:01 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 34/40] linux-user: Don't check FCR31_NAN2008 bit for nanoMIPS Stefan Markovic
2018-07-23 17:02 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 35/40] mips_malta: Add basic nanoMIPS boot code for MIPS' Malta Stefan Markovic
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 36/40] mips_malta: Setup GT64120 BARs in nanoMIPS bootloader Stefan Markovic
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 37/40] mips_malta: Fix semihosting argument passing for nanoMIPS bare metal Stefan Markovic
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 38/40] gdbstub: Disable handling of nanoMIPS ISA bit in the MIPS gdbstub Stefan Markovic
2018-07-23 17:03 ` Richard Henderson
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 39/40] gdbstub: Add XML support for GDB for nanoMIPS Stefan Markovic
2018-07-19 12:55 ` [Qemu-devel] [PATCH v3 40/40] target/mips: Add definition of nanoMIPS I7200 CPU Stefan Markovic
2018-07-23 17:05 ` Richard Henderson
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.