From: Aleksandar Markovic <aleksandar.markovic@rt-rk.com>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, laurent@vivier.eu, riku.voipio@iki.fi,
philippe.mathieu.daude@gmail.com, aurelien@aurel32.net,
richard.henderson@linaro.org, amarkovic@wavecomp.com,
smarkovic@wavecomp.com, pjovanovic@wavecomp.com,
pburton@wavecomp.com
Subject: [Qemu-devel] [PATCH v8 00/87] Add nanoMIPS support to QEMU
Date: Mon, 13 Aug 2018 19:52:25 +0200 [thread overview]
Message-ID: <1534182832-554-1-git-send-email-aleksandar.markovic@rt-rk.com> (raw)
From: Aleksandar Markovic <amarkovic@wavecomp.com>
v7->v8:
- the series is slightly reorganized so that:
- patches 1-19 are fixes and improvements that are not
dependent on the existence of nanoMIPS (even though most
of them are logicaly connected to (and necessary for)
nanoMIPS support) - they fix and improve pre-nanoMIPS code
- patches 20-65 introduce core nanoMIPS functionality, but
do not contain any dependence on or reference to nanoMIPS
Linux ABI
- patches 66-87 mostly deal with Linux user mode-related
nanoMIPS functionality, therefore dependent on nanoMIPS
Linux ABI
- the series will probably be split into three (corresponding
to the organization mentioned above) in near future
- added support for availability control via bit config XNP
- fixed availabitily control for LLWP/SCWP
- added support for availability control via bit config MT
- fixed availabitily control for pre-nanoMIPS MT ASE
- fixed availabitily control for nanoMIPS MT ASE
- completely removed case-statements defined by integer range
from translate.c
- patch on nanoMIPS specifics in ELF headers split into two
- patch on GT64120-related functionality in nanoMIPS bootloader
updated with comments and reorganizes with respect to
endianness
- replaced one instance of shift/mask with extract32()
- fixed one instance of missing default case in decoding engine
- removed several instances of unnecessary default case in
decoding engine
- minor tweaks related to variable scope and naming
- fixed several spelling mistakes in commit messages
- rebased to the latest code
v6->v7:
- found a better place for MIPS_ARCH in elf.h
- improved patch for LLWP and SCWP
- fixed missing availability control, alignment, usage
of extract32() in DSP patches
- added disassembler support for microMIPS and nanoMIPS
- removed unnecessary addition of one empty line in the
patch on WR bit
- improved statx() syscall translation
- improved nanoMIPS items in binfmt script
- amended pre-nanoMIPS items in qemu-doc.texi
- added nanoMIPS items in qemu-doc.texi
- changed slightly patch order to be logicaly more
comprehensive
- rebased to the latest code
- NOTE: there will be some sheckpatch.pl errors and warning
for this series; however, we think those are flase positives
in these particular circumstances - therefore we will not
change any patch related to these checkpatch.pl messages
v5->v6:
- used names offset and imm instead of rd and rs when
appropriate
- used gen_op_addr_addi when appropriate in one more place
- avoided usage of tcg_temp_local_new
- avoided unnecessary sign extension related to addr_add
- fixed unprotected storing to cpu_gpr[0]
- removed some unnecessary testing for ISA_NANOMIPS
- updated patch for LLWP and SCWP
- extract32 inserted instead of shift/mask in DSP patches
- removed useless casts from DSP patches
- reorganized functions to eliminated duplicated loading of
gpr values into tcg variables in DSP patches
- check Config1.WR bit for Watch registers only when using
in runtime
- removed duplicated check for bad address in PC register
- added support for statx system call
- updated script qemu-binfmt-conf.sh for nanoMIPS
- rebased to the latest code
v4->v5:
- merged series "Mips maintenance and misc fixes and improvements"
and this one for easier handling (there are build dependencies)
- eliminated shadow variables from translate.c
- replaced shift/mask combination with extract32()
- added new function gen_op_addr_addi()
- added patch for LLWP and SCWP
- added "fall through" comments at appropriate places
- eliminated micromips flag from I7200 definition
- numerous other enhancements originating from reviewer's
comments
- some of the patches split into two or more for easier
handling and review
- rebased to the latest code
v3->v4:
- added support for nanoMIPS user mode functionality and
configuration
- DSP patch split into three for easier review and handling
- corrected indentation in all decoding engine patches
- shift/mask replaced with equivalent extract32() in some
patches
- added missing default cases in some patches
- refactored invocation logic aroung decode_nanomips_opc()
- improved comments before decode_gpr_XXX() utilities
- all four decode_gpr_XXX() are now in a single patch
- two patches on updating BadInstr and related registers
are now merged, and execution logic improved
- minor formatting corrections
- rebased to the latest code
v2->v3:
- added support for nanoMIPS-specifics in ELF headers
- added support for CP0 Config0.WR bit
- updated I7200 definition
- improved indentation of some switch statements
- slight reorganization of patches (splitting, order)
- rebased to the latest code
v1->v2:
- added DSP ASE support
- added MT ASE support
- added GDB XML support
- order of patches changed
- commit messages and patch title improved across the board
- obsolete email addresses for authors and cosigners replaced
with the right ones
- some functions renamed to reflect better the documentation
- some macros renamed to reflect better their nanoMIPS nature
- streamlined formatting
- some of other reviewer's comments addressed, but the majority
was not; this is because the focus of this version was on
completing the functionality as much as possible; remaining
comments will be addressed in the subsequent versions of this
series
This series of patches implements recently announced nanoMIPS on QEMU.
nanoMIPS is a variable length ISA containing 16, 32 and 48-bit wide
instructions. It is designed to be portable at assembly level with
other MIPS and microMIPS code, but contains a number of changes that
enhance code density and efficiency. The largest portion of patches
is nanoMIPS decoding engine.
For more information, please refer to the following link:
https://www.mips.com/products/architectures/nanomips/
Aleksandar Markovic (16):
MAINTAINERS: Update target/mips maintainer's email addresses
target/mips: Avoid case statements formulated by ranges - part 1
target/mips: Mark switch fallthroughs with interpretable comments
target/mips: Fix two instances of shadow variables
target/mips: Update some CP0 registers bit definitions
elf: Remove duplicate preprocessor constant definition
elf: Add ELF flags for MIPS machine variants
linux-user: Update MIPS syscall numbers up to kernel 4.18 headers
qemu-doc: Amend MIPS-related items
target/mips: Add preprocessor constants for nanoMIPS
target/mips: Add placeholder and invocation of decode_nanomips_opc()
target/mips: Add nanoMIPS decoding and extraction utilities
elf: Relax MIPS' elf_check_arch() to accept EM_NANOMIPS too
elf: Don't check FCR31_NAN2008 bit for nanoMIPS
linux-user: Update syscall_defs.h header for nanoMIPS
qemu-doc: Add nanoMIPS-related items
Aleksandar Rikalo (20):
target/mips: Avoid case statements formulated by ranges - part 2
target/mips: Add support for availability control via bit XNP
target/mips: Add support for availability control via bit MT
target/mips: Fix MT ASE instructions' availability control
linux-user: Add preprocessor availability control to some syscalls
target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair
elf: Add EM_NANOMIPS value as a valid one for e_machine field
elf: On elf loading, treat both EM_MIPS and EM_NANOMIPS as legal for
MIPS
elf: Add nanoMIPS specific variations in ELF header fields
linux-user: Add syscall numbers for nanoMIPS
linux-user: Add target_signal.h header for nanoMIPS
linux-user: Add termbits.h header for nanoMIPS
linux-user: Add target_fcntl.h header for nanoMIPS
linux-user: Add sockbits.h header for nanoMIPS
linux-user: Add target_syscall.h header for nanoMIPS
linux-user: Add support for nanoMIPS signal trampoline
linux-user: Amend support for sigaction() syscall for nanoMIPS
linux-user: Add support for statx() syscall for all platforms
linux-user: Add support for nanoMIPS core files
linux-user: Add nanoMIPS support in scripts/qemu-binfmt-conf.sh
Dimitrije Nikolic (5):
linux-user: Add target_cpu.h header for nanoMIPS
linux-user: Add target_structs.h header for nanoMIPS
linux-user: Add target_elf.h header for nanoMIPS
linux-user: Add signal.c for nanoMIPS
linux-user: Add cpu_loop.c for nanoMIPS
James Hogan (5):
target/mips: Implement emulation of nanoMIPS EXTW instruction
target/mips: Adjust exception_resume_pc() for nanoMIPS
target/mips: Adjust set_hflags_for_handler() for nanoMIPS
target/mips: Adjust set_pc() for nanoMIPS
gdbstub: Disable handling of nanoMIPS ISA bit in the MIPS gdbstub
Matthew Fortune (5):
target/mips: Add emulation of nanoMIPS 16-bit save and restore
instructions
target/mips: Implement emulation of nanoMIPS ROTX instruction
disas: Add support for microMIPS and nanoMIPS
target/mips: Add handling of branch delay slots for nanoMIPS
mips_malta: Add basic nanoMIPS boot code for Malta board
Paul Burton (1):
mips_malta: Add setting up GT64120 BARs to the nanoMIPS bootloader
Stefan Markovic (16):
target/mips: Add CP0 BadInstrX register
target/mips: Implement CP0 Config1.WR bit functionality
target/mips: Add gen_op_addr_addi()
target/mips: Add nanoMIPS DSP ASE opcodes
target/mips: Implement MT ASE support for nanoMIPS
target/mips: Add emulation of DSP ASE for nanoMIPS - part 1
target/mips: Add emulation of DSP ASE for nanoMIPS - part 2
target/mips: Add emulation of DSP ASE for nanoMIPS - part 3
target/mips: Add emulation of DSP ASE for nanoMIPS - part 4
target/mips: Add emulation of DSP ASE for nanoMIPS - part 5
target/mips: Add emulation of DSP ASE for nanoMIPS - part 6
target/mips: Add updating BadInstr, BadInstrP, BadInstrX for nanoMIPS
mips_malta: Fix semihosting argument passing for nanoMIPS bare metal
target/mips: Add definition of nanoMIPS I7200 CPU
linux-user: Add nanoMIPS linux user mode configuration support
gdbstub: Add XML support for GDB for nanoMIPS
Yongbok Kim (19):
target/mips: Don't update BadVAddr register in Debug Mode
target/mips: Check ELPA flag only in some cases of MFHC0 and MTHC0
target/mips: Add nanoMIPS base instruction set opcodes
target/mips: Add emulation of nanoMIPS 16-bit arithmetic instructions
target/mips: Add emulation of nanoMIPS 16-bit branch instructions
target/mips: Add emulation of nanoMIPS 16-bit shift instructions
target/mips: Add emulation of nanoMIPS 16-bit misc instructions
target/mips: Add emulation of nanoMIPS 16-bit load and store
instructions
target/mips: Add emulation of nanoMIPS 16-bit logic instructions
target/mips: Add emulation of some common nanoMIPS 32-bit instructions
target/mips: Add emulation of nanoMIPS instructions MOVE.P and
MOVE.PREV
target/mips: Add emulation of nanoMIPS 48-bit instructions
target/mips: Add emulation of nanoMIPS FP instructions
target/mips: Add emulation of misc nanoMIPS instructions (pool32a0)
target/mips: Add emulation of misc nanoMIPS instructions (pool32axf)
target/mips: Add emulation of misc nanoMIPS instructions (p_lsx)
target/mips: Add emulation of nanoMIPS 32-bit load and store
instructions
target/mips: Add emulation of nanoMIPS 32-bit branch instructions
target/mips: Fix ERET/ERETNC behavior related to ADEL exception
.mailmap | 7 +-
MAINTAINERS | 12 +-
configure | 13 +-
default-configs/nanomips-linux-user.mak | 1 +
disas/Makefile.objs | 1 +
disas/mips.c | 358 +-
disas/nanomips.cpp | 15752 ++++++++++++++++++++++++++++++
disas/nanomips.h | 1208 +++
gdb-xml/nanomips-cp0.xml | 13 +
gdb-xml/nanomips-cpu.xml | 44 +
gdb-xml/nanomips-dsp.xml | 20 +
gdb-xml/nanomips-fpu.xml | 45 +
gdb-xml/nanomips-linux.xml | 20 +
hw/mips/mips_malta.c | 212 +-
include/disas/bfd.h | 1 +
include/elf.h | 44 +-
include/hw/elf_ops.h | 8 +
linux-user/elfload.c | 12 +-
linux-user/mips/cpu_loop.c | 36 +-
linux-user/mips/signal.c | 36 +-
linux-user/mips/syscall_nr.h | 9 +
linux-user/mips/termbits.h | 4 +
linux-user/mips64/syscall_nr.h | 18 +
linux-user/nanomips/cpu_loop.c | 1 +
linux-user/nanomips/signal.c | 1 +
linux-user/nanomips/sockbits.h | 1 +
linux-user/nanomips/syscall_nr.h | 275 +
linux-user/nanomips/target_cpu.h | 21 +
linux-user/nanomips/target_elf.h | 14 +
linux-user/nanomips/target_fcntl.h | 38 +
linux-user/nanomips/target_signal.h | 22 +
linux-user/nanomips/target_structs.h | 1 +
linux-user/nanomips/target_syscall.h | 30 +
linux-user/nanomips/termbits.h | 1 +
linux-user/strace.c | 14 +-
linux-user/syscall.c | 150 +-
linux-user/syscall_defs.h | 95 +-
qemu-doc.texi | 15 +-
scripts/qemu-binfmt-conf.sh | 16 +-
target/mips/cpu.c | 12 +-
target/mips/cpu.h | 164 +-
target/mips/gdbstub.c | 13 +-
target/mips/helper.c | 35 +-
target/mips/helper.h | 2 +
target/mips/internal.h | 9 +-
target/mips/machine.c | 5 +-
target/mips/mips-defs.h | 4 +
target/mips/op_helper.c | 113 +-
target/mips/translate.c | 4997 +++++++++-
target/mips/translate_init.inc.c | 39 +
50 files changed, 23718 insertions(+), 244 deletions(-)
create mode 100644 default-configs/nanomips-linux-user.mak
create mode 100644 disas/nanomips.cpp
create mode 100644 disas/nanomips.h
create mode 100644 gdb-xml/nanomips-cp0.xml
create mode 100644 gdb-xml/nanomips-cpu.xml
create mode 100644 gdb-xml/nanomips-dsp.xml
create mode 100644 gdb-xml/nanomips-fpu.xml
create mode 100644 gdb-xml/nanomips-linux.xml
create mode 100644 linux-user/nanomips/cpu_loop.c
create mode 100644 linux-user/nanomips/signal.c
create mode 100644 linux-user/nanomips/sockbits.h
create mode 100644 linux-user/nanomips/syscall_nr.h
create mode 100644 linux-user/nanomips/target_cpu.h
create mode 100644 linux-user/nanomips/target_elf.h
create mode 100644 linux-user/nanomips/target_fcntl.h
create mode 100644 linux-user/nanomips/target_signal.h
create mode 100644 linux-user/nanomips/target_structs.h
create mode 100644 linux-user/nanomips/target_syscall.h
create mode 100644 linux-user/nanomips/termbits.h
--
2.7.4
next reply other threads:[~2018-08-13 17:54 UTC|newest]
Thread overview: 120+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-13 17:52 Aleksandar Markovic [this message]
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 01/87] MAINTAINERS: Update target/mips maintainer's email addresses Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 02/87] target/mips: Avoid case statements formulated by ranges - part 1 Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 03/87] target/mips: Avoid case statements formulated by ranges - part 2 Aleksandar Markovic
2018-08-14 11:13 ` Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 04/87] target/mips: Mark switch fallthroughs with interpretable comments Aleksandar Markovic
2019-07-07 20:26 ` [Qemu-devel] Handling of fall through code (was: " Stefan Weil
2019-07-08 4:40 ` Markus Armbruster
2019-07-08 4:52 ` [Qemu-devel] Handling of fall through code Stefan Weil
2019-07-09 5:40 ` Markus Armbruster
2019-07-08 8:14 ` [Qemu-devel] Handling of fall through code (was: [PATCH v8 04/87] target/mips: Mark switch fallthroughs with interpretable comments Aleksandar Markovic
2019-07-08 12:04 ` Stefan Weil
2019-07-08 12:08 ` Daniel P. Berrangé
2019-07-08 19:39 ` Aleksandar Markovic
2019-07-09 8:25 ` Peter Maydell
2019-07-21 16:39 ` [Qemu-devel] Handling of fall through code Stefan Weil
2019-07-22 9:09 ` Peter Maydell
2019-07-08 8:42 ` [Qemu-devel] Handling of fall through code (was: [PATCH v8 04/87] target/mips: Mark switch fallthroughs with interpretable comments Peter Maydell
2019-07-09 5:42 ` Markus Armbruster
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 05/87] target/mips: Fix two instances of shadow variables Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 06/87] target/mips: Update some CP0 registers bit definitions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 07/87] target/mips: Add CP0 BadInstrX register Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 08/87] target/mips: Add support for availability control via bit XNP Aleksandar Markovic
2018-08-14 12:23 ` Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 09/87] target/mips: Add support for availability control via bit MT Aleksandar Markovic
2018-08-13 18:13 ` Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 10/87] target/mips: Fix MT ASE instructions' availability control Aleksandar Markovic
2018-08-13 18:23 ` Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 11/87] target/mips: Implement CP0 Config1.WR bit functionality Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 12/87] target/mips: Don't update BadVAddr register in Debug Mode Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 13/87] target/mips: Check ELPA flag only in some cases of MFHC0 and MTHC0 Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 14/87] target/mips: Add gen_op_addr_addi() Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 15/87] elf: Remove duplicate preprocessor constant definition Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 16/87] elf: Add ELF flags for MIPS machine variants Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 17/87] linux-user: Update MIPS syscall numbers up to kernel 4.18 headers Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 18/87] linux-user: Add preprocessor availability control to some syscalls Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 19/87] qemu-doc: Amend MIPS-related items Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 20/87] target/mips: Add preprocessor constants for nanoMIPS Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 21/87] target/mips: Add nanoMIPS base instruction set opcodes Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 22/87] target/mips: Add nanoMIPS DSP ASE opcodes Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 23/87] target/mips: Add placeholder and invocation of decode_nanomips_opc() Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 24/87] target/mips: Add nanoMIPS decoding and extraction utilities Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 25/87] target/mips: Add emulation of nanoMIPS 16-bit arithmetic instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 26/87] target/mips: Add emulation of nanoMIPS 16-bit branch instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 27/87] target/mips: Add emulation of nanoMIPS 16-bit shift instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 28/87] target/mips: Add emulation of nanoMIPS 16-bit misc instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 29/87] target/mips: Add emulation of nanoMIPS 16-bit load and store instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 30/87] target/mips: Add emulation of nanoMIPS 16-bit logic instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 31/87] target/mips: Add emulation of nanoMIPS 16-bit save and restore instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 32/87] target/mips: Add emulation of some common nanoMIPS 32-bit instructions Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 33/87] target/mips: Add emulation of nanoMIPS instructions MOVE.P and MOVE.PREV Aleksandar Markovic
2018-08-13 17:52 ` [Qemu-devel] [PATCH v8 34/87] target/mips: Add emulation of nanoMIPS 48-bit instructions Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 35/87] target/mips: Add emulation of nanoMIPS FP instructions Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 36/87] target/mips: Add emulation of misc nanoMIPS instructions (pool32a0) Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 37/87] target/mips: Add emulation of misc nanoMIPS instructions (pool32axf) Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 38/87] target/mips: Add emulation of misc nanoMIPS instructions (p_lsx) Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 39/87] target/mips: Implement emulation of nanoMIPS ROTX instruction Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 40/87] target/mips: Implement emulation of nanoMIPS EXTW instruction Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 41/87] target/mips: Add emulation of nanoMIPS 32-bit load and store instructions Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 42/87] target/mips: Implement emulation of nanoMIPS LLWP/SCWP pair Aleksandar Markovic
2018-08-14 12:20 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 43/87] target/mips: Add emulation of nanoMIPS 32-bit branch instructions Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 44/87] target/mips: Implement MT ASE support for nanoMIPS Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 45/87] target/mips: Add emulation of DSP ASE for nanoMIPS - part 1 Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 46/87] target/mips: Add emulation of DSP ASE for nanoMIPS - part 2 Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 47/87] target/mips: Add emulation of DSP ASE for nanoMIPS - part 3 Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 48/87] target/mips: Add emulation of DSP ASE for nanoMIPS - part 4 Aleksandar Markovic
2018-08-16 12:31 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 49/87] target/mips: Add emulation of DSP ASE for nanoMIPS - part 5 Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 50/87] target/mips: Add emulation of DSP ASE for nanoMIPS - part 6 Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 51/87] disas: Add support for microMIPS and nanoMIPS Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 52/87] target/mips: Add handling of branch delay slots for nanoMIPS Aleksandar Markovic
2018-08-16 13:01 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 53/87] target/mips: Add updating BadInstr, BadInstrP, BadInstrX " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 54/87] target/mips: Adjust exception_resume_pc() " Aleksandar Markovic
2018-08-16 12:56 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 55/87] target/mips: Adjust set_hflags_for_handler() " Aleksandar Markovic
2018-08-16 12:05 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 56/87] target/mips: Adjust set_pc() " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 57/87] target/mips: Fix ERET/ERETNC behavior related to ADEL exception Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 58/87] elf: Add EM_NANOMIPS value as a valid one for e_machine field Aleksandar Markovic
2018-08-16 12:55 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 59/87] elf: Relax MIPS' elf_check_arch() to accept EM_NANOMIPS too Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 60/87] elf: Don't check FCR31_NAN2008 bit for nanoMIPS Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 61/87] elf: On elf loading, treat both EM_MIPS and EM_NANOMIPS as legal for MIPS Aleksandar Markovic
2018-08-16 12:28 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 62/87] mips_malta: Add basic nanoMIPS boot code for Malta board Aleksandar Markovic
2018-08-16 11:59 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 63/87] mips_malta: Add setting up GT64120 BARs to the nanoMIPS bootloader Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 64/87] mips_malta: Fix semihosting argument passing for nanoMIPS bare metal Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 65/87] target/mips: Add definition of nanoMIPS I7200 CPU Aleksandar Markovic
2018-08-16 12:26 ` Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 66/87] elf: Add nanoMIPS specific variations in ELF header fields Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 67/87] linux-user: Add syscall numbers for nanoMIPS Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 68/87] linux-user: Add target_signal.h header " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 69/87] linux-user: Add termbits.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 70/87] linux-user: Update syscall_defs.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 71/87] linux-user: Add target_fcntl.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 72/87] linux-user: Add sockbits.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 73/87] linux-user: Add target_syscall.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 74/87] linux-user: Add target_cpu.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 75/87] linux-user: Add target_structs.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 76/87] linux-user: Add target_elf.h " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 77/87] linux-user: Add signal.c " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 78/87] linux-user: Add support for nanoMIPS signal trampoline Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 79/87] linux-user: Add cpu_loop.c for nanoMIPS Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 80/87] linux-user: Amend support for sigaction() syscall " Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 81/87] linux-user: Add support for statx() syscall for all platforms Aleksandar Markovic
2018-08-20 7:48 ` Timothy Baldwin
2018-08-20 9:45 ` Aleksandar Markovic
2018-08-29 15:38 ` Timothy Baldwin
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 82/87] linux-user: Add support for nanoMIPS core files Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 83/87] linux-user: Add nanoMIPS linux user mode configuration support Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 84/87] linux-user: Add nanoMIPS support in scripts/qemu-binfmt-conf.sh Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 85/87] gdbstub: Disable handling of nanoMIPS ISA bit in the MIPS gdbstub Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 86/87] gdbstub: Add XML support for GDB for nanoMIPS Aleksandar Markovic
2018-08-13 17:53 ` [Qemu-devel] [PATCH v8 87/87] qemu-doc: Add nanoMIPS-related items Aleksandar Markovic
2018-08-14 15:52 ` [Qemu-devel] [PATCH v8 00/87] Add nanoMIPS support to QEMU Aleksandar Markovic
2018-08-16 8:16 ` no-reply
2018-08-16 11:43 ` Aleksandar Markovic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1534182832-554-1-git-send-email-aleksandar.markovic@rt-rk.com \
--to=aleksandar.markovic@rt-rk.com \
--cc=amarkovic@wavecomp.com \
--cc=aurelien@aurel32.net \
--cc=laurent@vivier.eu \
--cc=pburton@wavecomp.com \
--cc=peter.maydell@linaro.org \
--cc=philippe.mathieu.daude@gmail.com \
--cc=pjovanovic@wavecomp.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=riku.voipio@iki.fi \
--cc=smarkovic@wavecomp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.