From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hemant Agrawal Subject: [PATCH 4/4] doc: remove redundant prerequisite info for dpaa2 devices Date: Thu, 30 Aug 2018 13:09:32 +0530 Message-ID: <1535614772-20886-4-git-send-email-hemant.agrawal@nxp.com> References: <1535614772-20886-1-git-send-email-hemant.agrawal@nxp.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: shreyansh.jain@nxp.com To: dev@dpdk.org Return-path: Received: from EUR02-HE1-obe.outbound.protection.outlook.com (mail-eopbgr10042.outbound.protection.outlook.com [40.107.1.42]) by dpdk.org (Postfix) with ESMTP id 63A9E4CAF for ; Thu, 30 Aug 2018 09:41:47 +0200 (CEST) In-Reply-To: <1535614772-20886-1-git-send-email-hemant.agrawal@nxp.com> List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" Signed-off-by: Hemant Agrawal --- doc/guides/cryptodevs/dpaa2_sec.rst | 28 +++++----------------- doc/guides/eventdevs/dpaa2.rst | 48 ++++--------------------------------- doc/guides/nics/dpaa2.rst | 48 ++++--------------------------------- 3 files changed, 14 insertions(+), 110 deletions(-) diff --git a/doc/guides/cryptodevs/dpaa2_sec.rst b/doc/guides/cryptodevs/dpaa2_sec.rst index 9191704..8fa6f02 100644 --- a/doc/guides/cryptodevs/dpaa2_sec.rst +++ b/doc/guides/cryptodevs/dpaa2_sec.rst @@ -129,7 +129,7 @@ AEAD algorithms: Supported DPAA2 SoCs -------------------- -* LS2080A/LS2040A +* LS2160A * LS2084A/LS2044A * LS2088A/LS2048A * LS1088A/LS1048A @@ -157,31 +157,15 @@ Prerequisites DPAA2_SEC driver has similar pre-requisites as described in :ref:`dpaa2_overview`. The following dependencies are not part of DPDK and must be installed separately: -* **NXP Linux SDK** - - NXP Linux software development kit (SDK) includes support for the family - of QorIQ® ARM-Architecture-based system on chip (SoC) processors - and corresponding boards. - - It includes the Linux board support packages (BSPs) for NXP SoCs, - a fully operational tool chain, kernel and board specific modules. - - SDK and related information can be obtained from: `NXP QorIQ SDK `_. - -* **DPDK Extra Scripts** - - DPAA2 based resources can be configured easily with the help of ready scripts - as provided in the DPDK helper repository. - - `DPDK Extra Scripts `_. +See :doc:`../platform/dpaa2` for setup information Currently supported by DPDK: -* NXP SDK **17.08+**. -* MC Firmware version **10.3.1** and higher. -* Supported architectures: **arm64 LE**. +- NXP SDK **18.09+**. +- MC Firmware version **10.9.0** and higher. +- Supported architectures: **arm64 LE**. -* Follow the DPDK :ref:`Getting Started Guide for Linux ` to setup the basic DPDK environment. +- Follow the DPDK :ref:`Getting Started Guide for Linux ` to setup the basic DPDK environment. Pre-Installation Configuration ------------------------------ diff --git a/doc/guides/eventdevs/dpaa2.rst b/doc/guides/eventdevs/dpaa2.rst index ad94f24..eaa8c21 100644 --- a/doc/guides/eventdevs/dpaa2.rst +++ b/doc/guides/eventdevs/dpaa2.rst @@ -26,7 +26,7 @@ The DPAA2 EVENTDEV implements many features in the eventdev API; Supported DPAA2 SoCs -------------------- -- LS2080A/LS2040A +- LX2160A - LS2084A/LS2044A - LS2088A/LS2048A - LS1088A/LS1048A @@ -34,52 +34,12 @@ Supported DPAA2 SoCs Prerequisites ------------- -There are three main pre-requisities for executing DPAA2 EVENTDEV on a DPAA2 -compatible board: - -1. **ARM 64 Tool Chain** - - For example, the `*aarch64* Linaro Toolchain `_. - -2. **Linux Kernel** - - It can be obtained from `NXP's Github hosting `_. - -3. **Rootfile system** - - Any *aarch64* supporting filesystem can be used. For example, - Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained - from `here `_. - -As an alternative method, DPAA2 EVENTDEV can also be executed using images provided -as part of SDK from NXP. The SDK includes all the above prerequisites necessary -to bring up a DPAA2 board. - -The following dependencies are not part of DPDK and must be installed -separately: - -- **NXP Linux SDK** - - NXP Linux software development kit (SDK) includes support for family - of QorIQ® ARM-Architecture-based system on chip (SoC) processors - and corresponding boards. - - It includes the Linux board support packages (BSPs) for NXP SoCs, - a fully operational tool chain, kernel and board specific modules. - - SDK and related information can be obtained from: `NXP QorIQ SDK `_. - -- **DPDK Extra Scripts** - - DPAA2 based resources can be configured easily with the help of ready scripts - as provided in the DPDK Extra repository. - - `DPDK Extras Scripts `_. +See :doc:`../platform/dpaa2` for setup information Currently supported by DPDK: -- NXP SDK **2.0+**. -- MC Firmware version **10.0.0** and higher. +- NXP SDK **18.09+**. +- MC Firmware version **10.9.0** and higher. - Supported architectures: **arm64 LE**. - Follow the DPDK :ref:`Getting Started Guide for Linux ` to setup the basic DPDK environment. diff --git a/doc/guides/nics/dpaa2.rst b/doc/guides/nics/dpaa2.rst index 66c03e1..d75da8c 100644 --- a/doc/guides/nics/dpaa2.rst +++ b/doc/guides/nics/dpaa2.rst @@ -409,7 +409,7 @@ Features of the DPAA2 PMD are: Supported DPAA2 SoCs -------------------- - +- LX2160A - LS2080A/LS2040A - LS2084A/LS2044A - LS2088A/LS2048A @@ -418,52 +418,12 @@ Supported DPAA2 SoCs Prerequisites ------------- -There are three main pre-requisities for executing DPAA2 PMD on a DPAA2 -compatible board: - -1. **ARM 64 Tool Chain** - - For example, the `*aarch64* Linaro Toolchain `_. - -2. **Linux Kernel** - - It can be obtained from `NXP's Github hosting `_. - -3. **Rootfile system** - - Any *aarch64* supporting filesystem can be used. For example, - Ubuntu 15.10 (Wily) or 16.04 LTS (Xenial) userland which can be obtained - from `here `_. - -As an alternative method, DPAA2 PMD can also be executed using images provided -as part of SDK from NXP. The SDK includes all the above prerequisites necessary -to bring up a DPAA2 board. - -The following dependencies are not part of DPDK and must be installed -separately: - -- **NXP Linux SDK** - - NXP Linux software development kit (SDK) includes support for family - of QorIQ® ARM-Architecture-based system on chip (SoC) processors - and corresponding boards. - - It includes the Linux board support packages (BSPs) for NXP SoCs, - a fully operational tool chain, kernel and board specific modules. - - SDK and related information can be obtained from: `NXP QorIQ SDK `_. - -- **DPDK Extra Scripts** - - DPAA2 based resources can be configured easily with the help of ready scripts - as provided in the DPDK Extra repository. - - `DPDK Extras Scripts `_. +See :doc:`../platform/dpaa2` for setup information Currently supported by DPDK: -- NXP SDK **17.08+**. -- MC Firmware version **10.3.1** and higher. +- NXP SDK **18.09+**. +- MC Firmware version **10.9.0** and higher. - Supported architectures: **arm64 LE**. - Follow the DPDK :ref:`Getting Started Guide for Linux ` to setup the basic DPDK environment. -- 2.7.4